Valid license not found
Has anyone else come across this? Recently on three separate installations I have run previously fine webtools sites and been presented with the license request page.
The licenses in each case were all perfectly valid and existed in Isolated Storage and I got round the issue by copying the relevant license to the bin directory. Surely this should be unecessary.
I can't help thinking this may be connected to a recent Windows update
Steve,
Just upgraded to patch 4 and no difference - I'm convinced it is a windows issue. I was just wondering if there might be a an issue with using the workaround that I am not aware of (i.e. copying the license file to each bin directory ).
until that arises I do just that.
Thanks
Geoff
Similar Messages
-
"Logon refused (valid license not installed)" after sap db restore ?
Hi,
I just restored my production db on test systm. It looks like things went ok - sap started with no errors. When I tried to logon I got this:
"E: Logon refused (valid license not installed)"
What steps should I take to resolve this ?
thanks
ViliusHi,
Using sap* user ? What is asterisk - it's just asterisk or it represents some unique number ? What password I shoud use
it is just asterisk .SAP* & DDIC are the default user name . Password is defined at the time of installation .Password in client 000 Of PRD system & in client of your new system is same.U can install saplicense at OS level .First of all apply for new license at SAPmarket place & than install it in your system
Karan
Edited by: karan Singh on Aug 2, 2008 1:12 PM -
JNIWrapper license not found.
I am getting the following error
JNIWrapper license not found.Could anyone please direct me to a site, where I can download JNIWrapper license.
Thanks in advanceThe best way would be to contact JNIWrapper developers.
Try http://support.teamdev.com
-Eugene -
Logon refused (valid license not installed)
Hello,
when we try to log on to SAP we are getting this error "Connection refused (valid license is not installed ".
we didn't any refresh or upgrade.
but the server was changed yesterday, you think this has an impact on the license?
could you help me pleaseHi,
Please hava a look into this step-by-step doc - [SAP LICENSE INSTALLATION|http://www.google.com/url?sa=t&source=web&cd=5&sqi=2&ved=0CDMQFjAE&url=http%3A%2F%2Fwww.fullinterview.com%2Fallpaperpresentations%2Fsap%2FSAP%2520LICENSE%2520INSTALLATION.doc&rct=j&q=how%20to%20change%20hardware%20ID%20and%20get%20new%20licence%20key%2Bsap&ei=J7sYTfDPCsL48Ab7i-2NDg&usg=AFQjCNHwIL5BagybgCTMbek_u6MsTlWmnQ&cad=rja]
Regards,
Sen -
T430s - Dialog Box Notification - BlueTooth Software License Not Found (2)
I have had my Lenovo for slightly less than a week. Although installation appeared to run just fine, I got an notifcation several days later that my BlueTooth Software License is not found. I do have BlueTooth 3.0, but I do not know what needs to be done to resolve this message/error.
Any thoughts?
Kevin S.Hello Keslptp,
Are your blue Tooth drivers updated? I would suggest that step first, then if the problem still is around I would then un-install and then re-install the Bluetooth driver.
If you could post back and let me know how it is coming let me know and I will be more then happy to take the next step with you if these solutions don't work.
Best Regards,
Hiro
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out! -
i am developing an native ios application i am doing a training in a company. this application contain PushNotification service. i have download a video tutorial and i complete all the tasks as the video show. but in the end when i install the provisioning profile it show this warning message : "valid signing identity not found" . i have work on this issue many days. i am new in ios developing, so day by day i read questions of developers that have this issue also and i've read the answers and try to fix it but no result. can anyone help me and guide what to do.
See the walk-thru and TS FAQ links in TN 2250 'Understanding and Resolving Code Signing Issues'
-
Regex validation: valid matches not found
Hi
I'm trying to use a regex to validate the format (not the content!) of email addresses. The best regex if found for this so far is
^([0-9a-zA-Z]([-.\w]*[0-9a-zA-Z])*@([0-9a-zA-Z][-\w]*[0-9a-zA-Z]\.)+[a-zA-Z]{2,9})$which I've tested using http://regexlib.com/RETester.aspx
Strings which produce matches using this tester fail validation when I use the same pattern as an item-level validation on an Apex page.
I know that there are some different regex dialects out there, so maybe that's the problem...
Can anybody help out with an explanation - or even a fix :) ?
Many thanks
johnThe problem seems to be a missing "*" metacharacter. I've put a small test case together:
WITH t AS (SELECT '[email protected]' email
FROM dual
UNION
SELECT '[email protected]'
FROM dual
SELECT t.email
, REGEXP_SUBSTR(t.email, '^([0-9a-zA-Z]([-.\w]*[0-9a-zA-Z])*@([0-9a-zA-Z][-\w]*[0-9a-zA-Z]\.)+[a-zA-Z]{2,9})$') orig_check
, REGEXP_SUBSTR(t.email, '^([0-9a-zA-Z]([-.\w]*[0-9a-zA-Z])*@([0-9a-zA-Z]*[-\w]*[0-9a-zA-Z]\.)+[a-zA-Z]{2,9})$') new_check
FROM t
; I'm going to deal with inet specific values (IP4 addresses, emails, URLs) in the second part of my regex introduction.
C. -
Custom Validator Class not found in Class Path
I have developed a custom validator class for User Self Registration request. However, when OIM is unable to find the custom validator class and generates teh following error:
[oracle.iam.platform.pluginframework] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 76584c4849877d50:-45bb4068:13c8294bd72:-8000-0000000000001236,0] [SRC_CLASS: oracle.iam.platform.pluginframework.InternalStore] [APP: oim#11.1.1.3.0] [SRC_METHOD: getPluginInstance] Not able to load class com.infotech.tra.CustomValidator.SelfRegisterUserCustomValidator from classpath
At what path should the jar file be placed?
UZI am running the plugin registration utility but it generates the error mentioned below. I have verified the structure of my zip file and the structure of zip file is:
-> SelfRegisterUserCustomValidator.zip
->Plugin.xml
->/lib/SelfRegisterUserCustomValidator.jar
->/resources/
Following our contents of plugin.xml:
<?xml version="1.0" encoding="UTF-8"?>
<oimplugins>
<plugins pluginpoint="oracle.iam.request.plugins.RequestDataValidator">
<plugin pluginclass= "com.infotech.tra.CustomValidator.SelfRegisterUserCustomValidator" version="1.0.0" name="SelfRegisterUserCustomValidator">
</plugin>
</plugins>
</oimplugins>
Following is the error being generated:
Enter name (complete file name with path) of the plugin file:
/u01/oracle/Middleware/Oracle_IDM1/server/plugin_utility/SelfRegisterUserCustomValidator.zip
[java] Java Result: 1
[echo] Exception in thread "main" java.lang.NoClassDefFoundError: oracle/iam/platformservice/utils/PluginUtility
[echo] Caused by: java.lang.ClassNotFoundException: oracle.iam.platformservice.utils.PluginUtility
[echo] at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
[echo] at java.security.AccessController.doPrivileged(Native Method)
[echo] at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
[echo] at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
[echo] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
[echo] at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
[echo] Could not find the main class: oracle.iam.platformservice.utils.PluginUtility. Program will exit. -
E66, Navigation License not found
Hy, I have bought E66 nokia business phone. But the free 3 months License doesnt seem to work. I have tried talking to the store i bought from, but he declines any knowledge about the software. Then i gave it to the dealers and they returned it by updating the software and the Navigation still does not work. The toll free help line people have no clue and are sending me back to the service centre.
Anyone in here know how to activate the free 3 months navigation license? Any E66 users please help.Hi
Have you checked you sales package. The box will state whether you have the 3 months navigation upgrade. Not all sales packages come with free navigation license.
If you do have it:
Step 1:
Start the Nokia maps application > Options> Extras> My licenses> Update
If that does not work
Step 2:
Nokia Maps> options> Extras> Options> Enter License Code
OR
Nokia Maps> options> Extras> Drive and Walk > Accept terms> Download > Select yes to connect> Select region> Enter License Code
Check the sales package for a voucher with a 12 digit code
If that does not work
Step 3:
Try updating the Nokia maps application from www.nokia.com/maps and try Step 1 and/or Step 2
If it still does not work you may try to upgrade/reinstall the software on your phone using the Nokia Software Updater (www.nokia.com/softwareupdate - NSU) and try Steps 1, 2 and 3
* Remember to make backups with Nokia PC suite before upgrading or reinstalling
Hope this helps!
Message Edited by shezmyster on 07-Mar-2009 05:04 PM
If this post helped to solve your enquiry, dont forget to mark me KUDOS and SOLUTION -
Is there a -D property I can specify to help Weblogic find its license? I
can start weblogic from the Start menu just fine, but in JBuilder it can't
find its license file.
Thanks,
JoelIf you are using wls6.0, you can specified -Dbea.home=c:\bea
where c:\bea\ contains the license.bea.
"Joel Trunick" <[email protected]> wrote in message
news:[email protected]..
>
Is there a -D property I can specify to help Weblogic find its license? I
can start weblogic from the Start menu just fine, but in JBuilder it can't
find its license file.
Thanks,
Joel -
SAP license key error: no valid license found: cannot log into SAP GUI
I deleted temp license from slicense on SM box, since I had already installed new digital license from SAP. Well, later I tried to log in again and was locked out. After some research, I found "sap license check failed" in the log files, java will not come up, and the hardware key has changed on me, so the valid license that was active before is not showing up now.
I applied for a new license with new hardware key and attempted to install from cmd prompt, using saplicense -install ifile=c:license.txt, but it gets an error. I put a trace on it and appears it cannot read license file key. I also tried to install another temp license, but that failed since no other previous valid license was found. At this point, I'm thinking I need to manually insert the license key into the database, but not sure what table or exactly how. SAP has not provided a solution yet.
I believe the hardware key changed due to renaming the server (we took out a hyphen in name) and had also reinstalled afterwards.
Has anyone else run into this issue?Yes, I wish it were that simple, but I cannot even bring up the logon screen. SAP GUI returns a message, resource temporarily unavailable. I looked in SAP MMC syslog and found several entries, "SAP-Basis System: No license found for hardware ID DLIC_HWIDKE"
I tried to install temp license from cmd prompt, but it says refuses and says no old or expired license found. I also tried to install the new license I applied for from SAP with new hardware key using saplicense -install ifile=license.txt and that failed as well.
For NW2004s, is it even possible to install a digital license using cmd prompt?
Ben -
Logon refused, valid license key not installed
Hi all,
Earlyer i posted one error on lisence key where i unable to login through a user. The error message comes like" logon refused( valid license not intalled)
Infact while i was installing IDES 4.7 on OS 2003, after 9 to 10 hour i got an error message as here posted below...
Changed working directory to C:\SAPinst DATABASE Instance.
INFO 2012-06-16 02:50:25
Changed working directory to C:\SAPinst DATABASE Instance.
INFO 2012-06-16 02:50:26
Creating file C:\SAPinst DATABASE Instance\brconnect.log.
INFO 2012-06-16 02:50:26
Changed working directory to C:\SAPinst DATABASE Instance.
INFO 2012-06-16 02:50:28
See 'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -f crsyn -o SAPPRD' output in 'C:\SAPinst DATABASE Instance\brconnect.log'.
INFO 2012-06-16 02:50:28
'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -f crsyn -o SAPPRD' returned with '0'.
INFO 2012-06-16 02:50:28
Creating file C:\SAPinst DATABASE Instance\brconnect.log.
INFO 2012-06-16 02:50:28
Changed working directory to C:\SAPinst DATABASE Instance.
INFO 2012-06-16 03:46:17
See 'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -o summary -f stats -o SAPPRD' output in 'C:\SAPinst DATABASE Instance\brconnect.log'.
ERROR 2012-06-16 03:46:17
MOS-01012 PROBLEM: 'D:\usr\sap\PRD\SYS\exe\run/brconnect -c -o summary -f stats -o SAPPRD' returned with '5' which is not a defined as a success code.
ERROR 2012-06-16 03:46:18
FJS-00012 Error when executing script.
when i Retry the installation it stopped automatically. The MMC started successfully. The only problem i got is license key is not valid through Tcode 'slicense'. The license expires status come with some invalid characters.
I think the problem is in the installation.
I am doing the installation on my laptop with an external harddisk. Is this the problem?? I tried the installation for two times but facing the same problem. please any one can suggest me how to overcome the problem.
Thanks...after you've adjusted your date ("<b>2012</b>-06-16 02:50:25") you might be able to successfully end your installation...but somehow i do not think that sap will tolerate such "date pimping"
GreetZ; AH -
I'm a newbie and just purchased my Zen Micro last weekend. I have been downloading music from Rhapsody successfully until last night. This morning I turned on my Zen and am getting "license not found" message.
I just subscribed to Rhapsody a few days ago so I'm current on my subscription. What causes this out of sync situation.
By the way, I have XP pro and went through hoops to get my computer to recognize the Zen after I upgraded the firmware to the version 2. If anyone has issues, I can share what i had to do to get around the problem.Hi Marvin,
I have verified the hardware requirement its suffucient to upgrade to 7.0 .
Also i have given show tech output
show tech
Cisco PIX Firewall Version 6.3(3)
Cisco PIX Device Manager Version 3.0(1)
Compiled on Wed 13-Aug-03 13:55 by morlee
FW-CORP up 22 mins 49 secs
Hardware: PIX-525, 256 MB RAM, CPU Pentium III 600 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES-AES: Enabled
Maximum Physical Interfaces: 8
Maximum Interfaces: 12
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
This PIX has a Failover Only (FO) license.
Let me know any possibility to done this activity. -
Simulation engine failed to start: A valid license was not found for simulation
Hi,
I'd like to run xsim by clicking "Run Simulation" in Vivado 2015.2 . However, in the Tcl console I see this error:
INFO: [Common 17-186] '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav/xsim.dir/ProgNetwork_behav/webtalk/usage_statistics_ext_xsim.xml' has been successfully sent to Xilinx on Mon Jul 13 16:01:02 2015. For additional details about this file, please refer to the WebTalk help file at /home/rob/sw/xilinx/xilinx-build/Vivado/2015.2/doc/webtalk_introduction.html.
INFO: [Common 17-206] Exiting Webtalk at Mon Jul 13 16:01:02 2015...
run_program: Time (s): cpu = 00:00:08 ; elapsed = 00:00:10 . Memory (MB): peak = 6669.582 ; gain = 0.000 ; free physical = 763 ; free virtual = 18006
INFO: [USF-XSim-4] XSim::Simulate design
INFO: [USF-XSim-61] Executing 'SIMULATE' step in '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav'
INFO: [USF-XSim-98] *** Running xsim
with args "ProgNetwork_behav -key {Behavioral:sim_1:Functional:ProgNetwork} -tclbatch {ProgNetwork.tcl} -log {simulate.log}"
INFO: [USF-XSim-8] Loading simulator feature
Vivado Simulator 2015.2
ERROR: [Simtcl 6-50] Simulation engine failed to start: A valid license was not found for simulation. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.
Please see the Tcl Console or the Messages for details.
However, if you look at the attached image, you'll see that my installed licenses include the license name "Simulation".
Why is Vivado complaining about "Simulation engine failed to start: A valid license was not found for simulation" ?
Thank you,
Rob
Hi Rob,
The reason for the license error is: Hostid mismatch. i.e., the hostid of the machine is different from the hostid in the license file.
I observe that the license file is generated with hostid: 52540019ee7e. You can cross check your hostid of the machine by running the command: lmutil lmhostid
You can rehost the license file using the steps mentioned in the section "Rehost or change the license server host for a license key file" in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf
Thanks,
Vinay -
A valid provisioning profile for this executable was not found
I have built an enterprise APP. It has been installed in hundreds of machine. It can run smoothly at the begining. After two months, a few of the machice cannot open the APP anymore. I have tried to read its crach log and it has nothing. Finally, i found out the reason by tracing the console log.
The error is "A valid provisioning profile for this executable was not found".
So I check if the file exist but it is disappeared. The user have not removed the profile.
At last, I tried to install the profile again, it is still not working even the profile is installed. Is there anyone who have the same issue? Thank you very much
Message was edited by: Ben125Sorry that I have made a mistake. A wrong profile is installed.
Thanks
Maybe you are looking for
-
Third Gen ipod won't work or restore
My friend has an old ipod with the click wheel. I think it's third generation. He hasn't been able to turn it on, and when it is connected to the computer it isn't recognized in Itunes. A couple times, a message popped up that said it needed to be re
-
I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?
-
So I hope this isn't something incredibly simple that I'm overlooking, but... I recently upgraded to CS4 fro CS3 (on a Mac). I have an XSL file to transform some XML for use in InDesign. In CS3, I could open the XSL file, specify the XML file in the
-
FT akm with 802.1x authentication failed at eapol key 2(invalid MIC)
My testing controller s/w version is 7.0.250.0, and testing clients were iphone5, iphone6 and macbook pro13, all debug inform showed failed because of invalid MIC, is this a bug or other reason ? WLAN configuration: (Cisco Controller) >show wlan 100
-
Cannot start 2nd form on same application server when starting script in 1s
Hello, we have a forms application running on a productive application server and the same application for different testing db's on a test application server. Within this application I can start a stored procedure that writes a spreadsheet via utl_f