JNIWrapper license not found.

I am getting the following error
JNIWrapper license not found.Could anyone please direct me to a site, where I can download JNIWrapper license.
Thanks in advance

The best way would be to contact JNIWrapper developers.
Try http://support.teamdev.com
-Eugene

Similar Messages

T430s - Dialog Box Notification - BlueTooth Software License Not Found (2)

I have had my Lenovo for slightly less than a week. Although installation appeared to run just fine, I got an notifcation several days later that my BlueTooth Software License is not found. I do have BlueTooth 3.0, but I do not know what needs to be done to resolve this message/error.
Any thoughts?
Kevin S.

Hello Keslptp,
Are your blue Tooth drivers updated? I would suggest that step first, then if the problem still is around I would then un-install and then re-install the Bluetooth driver.
If you could post back and let me know how it is coming let me know and I will be more then happy to take the next step with you if these solutions don't work.
Best Regards,
Hiro
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

E66, Navigation License not found

Hy, I have bought E66 nokia business phone. But the free 3 months License doesnt seem to work. I have tried talking to the store i bought from, but he declines any knowledge about the software. Then i gave it to the dealers and they returned it by updating the software and the Navigation still does not work. The toll free help line people have no clue and are sending me back to the service centre.
Anyone in here know how to activate the free 3 months navigation license? Any E66 users please help.

Hi
Have you checked you sales package. The box will state whether you have the 3 months navigation upgrade. Not all sales packages come with free navigation license.
If you do have it:
Step 1:
Start the Nokia maps application > Options> Extras> My licenses> Update
If that does not work
Step 2:
Nokia Maps> options> Extras> Options> Enter License Code
OR
Nokia Maps> options> Extras> Drive and Walk > Accept terms> Download > Select yes to connect> Select region> Enter License Code
Check the sales package for a voucher with a 12 digit code
If that does not work
Step 3:
Try updating the Nokia maps application from www.nokia.com/maps and try Step 1 and/or Step 2
If it still does not work you may try to upgrade/reinstall the software on your phone using the Nokia Software Updater (www.nokia.com/softwareupdate - NSU) and try Steps 1, 2 and 3
* Remember to make backups with Nokia PC suite before upgrading or reinstalling
Hope this helps!
Message Edited by shezmyster on 07-Mar-2009 05:04 PM
If this post helped to solve your enquiry, dont forget to mark me KUDOS and SOLUTION

Valid license not found

Has anyone else come across this? Recently on three separate installations I have run previously fine webtools sites and been presented with the license request page.
The licenses in each case were all perfectly valid and existed in Isolated Storage and I got round the issue by copying the relevant license to the bin directory. Surely this should be unecessary.
I can't help thinking this may be connected to a recent Windows update

Steve,
Just upgraded to patch 4 and no difference - I'm convinced it is a windows issue. I was just wondering if there might be a an issue with using the workaround that I am not aware of (i.e. copying the license file to each bin directory ).
until that arises I do just that.
Thanks
Geoff

License not found

Is there a -D property I can specify to help Weblogic find its license? I
can start weblogic from the Start menu just fine, but in JBuilder it can't
find its license file.
Thanks,
Joel

If you are using wls6.0, you can specified -Dbea.home=c:\bea
where c:\bea\ contains the license.bea.
"Joel Trunick" <[email protected]> wrote in message
news:[email protected]..
>
Is there a -D property I can specify to help Weblogic find its license? I
can start weblogic from the Start menu just fine, but in JBuilder it can't
find its license file.
Thanks,
Joel

License not fo

I'm a newbie and just purchased my Zen Micro last weekend. I have been downloading music from Rhapsody successfully until last night. This morning I turned on my Zen and am getting "license not found" message.
I just subscribed to Rhapsody a few days ago so I'm current on my subscription. What causes this out of sync situation.
By the way, I have XP pro and went through hoops to get my computer to recognize the Zen after I upgraded the firmware to the version 2. If anyone has issues, I can share what i had to do to get around the problem.

Hi Marvin,
I have verified the hardware requirement its suffucient to upgrade to 7.0 .
Also i have given show tech output
show tech
Cisco PIX Firewall Version 6.3(3)
Cisco PIX Device Manager Version 3.0(1)
Compiled on Wed 13-Aug-03 13:55 by morlee
FW-CORP up 22 mins 49 secs
Hardware:   PIX-525, 256 MB RAM, CPU Pentium III 600 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
Licensed Features:
Failover:                    Enabled
VPN-DES:                     Enabled
VPN-3DES-AES:                Enabled
Maximum Physical Interfaces: 8
Maximum Interfaces:          12
Cut-through Proxy:           Enabled
Guards:                      Enabled
URL-filtering:               Enabled
Inside Hosts:                Unlimited
Throughput:                  Unlimited
IKE peers:                   Unlimited
This PIX has a Failover Only (FO) license.
Let me know any possibility to done this activity.

"Dispatcher running, server not found" After installing temporary license

hi all,
we have Xi server at stack 03. As the licence expired, we requested for temporay license from SAP Marketplace and updated the same using Visual admin tool. The new expiry date was reflected in the visual admin tool. But once we restrted the WAS, we are unable to log into the visual admin.
"requested object was not found".
when used the url " http://localhost:50000" , it says
" dispatcher runing, server not found"
If anyone has faced simiplar problems, please let us know with some solution.
Regards,
Siva Maranani.

Your server is not running.
Check two things:
1)run jcmon pf=/usr/sap/..../<instance_profile_here
select 20 and then list process to see what is running.
You should see dispatcher, server and SDM running.
In your case the server will show 0 pid.
2) go to the /usr/sap...../j2ee/cluster/server/log/console_logs (I think this is the path....and then look at the latest error logs....
This should give you an idea why the server is not running...
Hope this helps,
John Ryan

Error Message on U150 - "Bluetooth Software license file not found. [2]"

I've installed a Microsoft Presenter Mouse 8000 on my new Lenovo U150 and now I get an annoying message at startup "Bluetooth Software license file not found. [2]". Everything seems to work fine, but I can't get rid of the message. Any one have any thoughts?

regkey : hkclass\.wid
valuename : shellex
value :
this registry was under file associations. after you do your scan and it shows you your list of problems click the file associations and add the file above to the ignore list. this should fix your problems.

Windows 7 in domain Cscript.exe c:\windows\system32\Slmgr.vbs /ato = license key not found

Hi,
1 Windows 7 machine doesn't want to activate its license key after deployment.It says "this copy is not genuine".
When I run >Cscript.exe c:\windows\system32\Slmgr.vbs /ato it says "Error: product not found."
It seems as if it doesn't find the local/general KMS key (needed to activate the key).
I was wondering if somebody could explain the working of this KMS key so we can analyze/troubleshoot.
Pls advise.
J.
Jan Hoedt

Well, that works indeed. The question now is "what happened". Entering the KMS key into the client works.
Jan Hoedt
Note:
Working config:
Server: server1.ourcompany.com
Address: 10.158.10.23
_vlmcs._tcp.ourcompany.com   SRV service location:
      priority       = 0
      weight         = 0
      port           = 1688
      svr hostname   = server2.ourcompany.com
server2.ourcompany.com   internet address = 10.158.10.33
Not working config:
Server: server4.ourcompany.com
Address: 10.158.22.33
_vlmcs._tcp.ourcompany.com   SRV service location:
      priority       = 0
      weight         = 0
      port           = 1688
      svr hostname   = server2.ourcompany.com
Here "server2.ourcompany.com   internet address = 10.158.10.33" is not available!

Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

Hi;
i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
what s the solution.
Thanks for your help

Hello,
I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
Thanks,

Bluetooth Software license file not found [2]

I get this message very time I start my T61. I have only one device phone that I use bluetooth on and it works fine. Anyone know
how to fix this?
Thanks
Message: bluetooth Software license file not found [2]

I also am waiting for an answer.
I have this same problem on N200 with Vista (yes...i know.....)
Shuky

Terminal Server User license file not found or User ID not matched.

Hi,
I recently went for the Process Runner, downloaded trial version and wanted to work with Ides system, but at the very first step the system throws the following error:
"Terminal Server User license file not found or User ID not matched.
and the details are as follows:
Process Runner 2008
Version : 4.20.10
Supported file version: 7.3
Current Framework: 2.0.50727.42
User Name: Demo User
Licensed To: Demo Company
Product Id : PR-ALL-DR-MTH-CU
Full Version : 4.20.10.9579
Current UserID : Administrator
License Type : Evaluation/Demo License
Evaluation Days : 1 of 30
Licensed Uses : 5 of 15
Expiration Date : 12/31/2011
COMPANY : Demo Company
MAX_ROWS : 30
MAX_THREADS : 3
USER : Demo User
Current Node Id : DAAB-AA43-58DB-00DB-4862
Max Instances Allowed : N/A
OS-Office culture info : en-US | en-US | en-US | en-US
C-Info : en-US
Computer : SAPSERVER
Current Domain : WORKGROUP
OS : Microsoft Windows NT 5.2.3790 Service Pack 1
AppPath : D:\Vijj downloaded\Process Runner
MyDocPath : C:\Documents and Settings\Administrator\My Documents\Innowera
Terminal Server User license file not found or User ID not matched.
Can anybody guide me please.
Thanks.

Hi,
According to the error message, please use performance monitor to diagnose if it is a memory-related bottleneck and you can use the counters of the memory part in the article below:
https://technet.microsoft.com/en-us/magazine/2008.08.pulse.aspx
In addition, it may be due to thousands of open connections to the server are in a TIME_WAIT state. You can run "netstat -an" command on the affected server and client. If you see mutiple connections in the TIME_WAIT state, you can follow the article
to increase the number of TCP/IP connections:
https://msdn.microsoft.com/en-us/library/ee377084(v=bts.70).aspx
Furthermore, if you are running windows server 2003, please make sure that you have installed the KB 948496 and stop all services that you don't need.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Simulation engine failed to start: A valid license was not found for simulation

Hi,
I'd like to run xsim by clicking "Run Simulation" in Vivado 2015.2 . However, in the Tcl console I see this error:
INFO: [Common 17-186] '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav/xsim.dir/ProgNetwork_behav/webtalk/usage_statistics_ext_xsim.xml' has been successfully sent to Xilinx on Mon Jul 13 16:01:02 2015. For additional details about this file, please refer to the WebTalk help file at /home/rob/sw/xilinx/xilinx-build/Vivado/2015.2/doc/webtalk_introduction.html.
INFO: [Common 17-206] Exiting Webtalk at Mon Jul 13 16:01:02 2015...
run_program: Time (s): cpu = 00:00:08 ; elapsed = 00:00:10 . Memory (MB): peak = 6669.582 ; gain = 0.000 ; free physical = 763 ; free virtual = 18006
INFO: [USF-XSim-4] XSim::Simulate design
INFO: [USF-XSim-61] Executing 'SIMULATE' step in '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav'
INFO: [USF-XSim-98] *** Running xsim
with args "ProgNetwork_behav -key {Behavioral:sim_1:Functional:ProgNetwork} -tclbatch {ProgNetwork.tcl} -log {simulate.log}"
INFO: [USF-XSim-8] Loading simulator feature
Vivado Simulator 2015.2
ERROR: [Simtcl 6-50] Simulation engine failed to start: A valid license was not found for simulation. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.
Please see the Tcl Console or the Messages for details.
However, if you look at the attached image, you'll see that my installed licenses include the license name "Simulation".
Why is Vivado complaining about "Simulation engine failed to start: A valid license was not found for simulation" ?
Thank you,
Rob

Hi Rob,
The reason for the license error is: Hostid mismatch. i.e., the hostid of the machine is different from the hostid in the license file.
I observe that the license file is generated with hostid: 52540019ee7e. You can cross check your hostid of the machine by running the command: lmutil lmhostid
You can rehost the license file using the steps mentioned in the section "Rehost or change the license server host for a license key file" in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf
Thanks,
Vinay

'java_wrapper: command not found' when running license script

Hello, am trying to run a third party application licensing script which needs JRE to run. This script is failing with the following error. 'java_wrapper: command not found' ...
Can anyone assist with ideas of resolution?! Does a path need to be set? Does JRE (1.4.1_x) need to live in a specific part of the unix filesystem (solaris 8)?!
Thanks!!

This is not a TNS names issue if you can connect to database. It could be a network problem, but more likely it's a problem with the installation of the app server. When you install the app server, it should use the name assigned to the server. I don't believe you can just make up a name for an app server unless it is known to the network.

Office 2013 Click to Run - VAMT error: product SKU is not found

We failed to install the retail key for Office 2013 Home and Business Retail through VAMT. Error is: The Software Licensing Service reported that the product SKU is not found.
VAMT key install and activation worked fine with other retail products. I believe it's somehow related to the click-to-run technology.
Any help would be appreciated.

Hi,
I'm not quite sure how exactly you did in VAMT, but usually, the error message will show up only if you are using a wrong product key.
Do you have any other product keys installed in VAMT? Make sure you are using the correct key. Also, which activation option are you using in VAMT?
http://technet.microsoft.com/en-us/library/hh825164.aspx
Regards,
Ethan Hua
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

JNIWrapper license not found.

Similar Messages

Maybe you are looking for