Validation code for business area and cenvat clearing accounts

Dear Friends,
In order to prevent the users from entering the wrong business area in the correct company code, I have written the validation as below.
Prerequisite : BSEG-BUKRS = '1000'
Check :  BSEG-GSBER = 'ABC' OR
      BSEG-GSBER = 'DEF' OR
      BSEG-GSBER = 'GHI' OR
      BSEG-GSBER = 'JKL'
Message : E - 023 - Please Check the Business Area.
     While trying to post Miro, cenvat clearing accounts is not picking up business area and giving an error "Please check business area" ,
I want the validation rule  not to consider or evade the cenvat clearing accounts and post the miro.
The user is also making another mistake. Ex: in the debit he should enter ABC(Business area) and in Credit also he should enter ABC (Business area). He is wrongly entering GHI which is affecting the trial balance.
Please suggest what changes to be done to the validation.
Regards
Sridhar

the issue is closed

Similar Messages

  • Business area in Cenvat clearing Accounts.

    Dear Friends,
    PO is already created. When Miro is done , Business area is entered which is a required field.
    When Miro is simulated,all the GL Accounts have picked up the business area, but cenvat clearing accounts have not picked up the business area.
    Because of this, We are unable to post Miro.
    Please advise how the  cenvat clearing accounts can pickup the business area?
    Regards
    Sridhar

    done through validation.

  • Validation Check for business place and section code.

    Hi Gurus
    Please provide me the prequisite check for creating a validation check for business place and section code.
    Regards,
    Vikas Malhotra

    Hii..
    Goto T.Code Ob28 write the following validation.
    Prerequisite
    BKPF-BUKRS = 'XXXX' AND BSEG-KOART = 'K' AND
    BSEG-QSSKZ = 'XX' AND BSEG-BSCHL <> '35' AND
    BSEG-BSCHL <> '25'
    Check
    BSEG-BUPLA = 'XXXX' AND BSEG-SECCO = 'XXXX'
    Message
    Message number ZFI    002
    Regards,
    Aakash

  • Difference between Business area and profit center accounting

    Hi Frnds,
    Can any body explain about difference between business area and profit center accounting .

    Hi
    Business area will have many profit centers. For example Vehicle is a business area in a company. Vehicle can be cars and Bikes etc. Here Vehicle is business area and Cars and Bike are profit centers. In broad Vehicle is a profit center. But as it has sub areas those are profit centers. So profit centers cannot be replaced with business area and vice versa. We can replace business area by Profit centre, only condition is that it should be in same controlling area. The business area is more like a business unit of a company. You can have multiple profit centers within a business area.
    Main distinguish factor is that distribution and assessment in possible in profit center but not in business area.
    One more distinction is that Business area need not be attached to any organisation structure. But profit centres can be created only under the controlling area. Business area can be across controlling area.
    Business area concept is used for making stragic decisions by the management whereas the primary purpose of profit centre accounting is responsibility accounting.
    http://help.sap.com/saphelp_erp2005/helpdata/en/ff/277203deea11d3b5b4006094b9b0a5/frameset.htm

  • Using Business Area and Profit Center Accounting with New GL functionality

    Hello,
    We are Public Sector and using ECC 6.0, we have been using Business Area with Fund Management. We also use Special Purpose Ledger with Document splitting. Before migrating to New GL functionality, we want to understand
    -     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
    -     If we activate Profit Center Accounting before migration, how will it work with the splitting process?
    -     If we migrate without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
    Thanking you

    Hi Sachin,
    Thank you for the reply, we want to know that
    -     The possibility of using both Business Area and Profit Center Accounting, and the impact on the system
    If we decide using Profit Center Accounting with Business Area with New GL functionality how we should do it
    -     should we activate classical Profit Center Accounting before migrating to New GL functionality, if we do this how will it work with the splitting process?
    -     If we migrate to New GL functionality without Profit Center Accounting, will this cause the activation of Profit center accounting later to be more complicated, even if we migrate again?
    Thanking you
    Tipu Khan

  • Configration steps for business area wise balance sheet and p&L accounts

    dear all
    sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
    please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
    what are the steps required and for configration and when enduser come into picture  acceptance test is reqired.
    plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
    regards
    babu

    Hello
    No seperate screen available for BA set up.
    Follow the IMG, enterprsie structure, define and assign set ups.
    Assign to SO / Plant /
    Create cost elements and assign cost centers for each business areas.
    Create clearing accounts for readjustments in BS and PL, and execute BA pl and bs adjustment programs for taxes, GRIR and some accounts, where BA is not populated.
    Now you would get seperate BS for each BA
    Reg
    assign points if useful
    dear all
    sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
    please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
    what are the steps required and for configration and when enduser come into picture acceptance test is reqired.
    plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
    regards
    babu

  • FI org i.e. business area and profit center

    I have one company code with 2 business lines (Product A and Product B)
    There are 3 location in India. So which one is better?
    Products as business area and location as a profit center
    or
    Location as a business area or product as profit center.
    Please let me know the reason.

    Hi,
    Please refer to the OSS note 321190:-
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=321190
    The decision was made to pursue the PCA approach as per SAP Note 321190, which was released in 2002, to do no further development for business areas, and to focus future development on profit centers, although FI-BA would continue to be supported. The rationale behind this suggestion was that EC-PCA had significantly better functionality than FI-BA. For example, EC-PCA has its own allocations, separate ledger, hierarchical reporting, transfer pricing, profit center substitution rules, and integration with planning and SAP Strategic Enterprise Management (SEM).
    I hope now it is clear to you.
    Regards,
    Gaurav

  • Cash Position Not Updated for Business Area

    Hello Experts,
    The Electronic Bank Statement and the Cash Position has been configured. Also the Configuration setting for Business Area account assignments is duly made in the Cash Management.
    The Cash Position Report in FF7A shows correct values when executed for the Company Code only. Also when executed for Business Area it shows correct values till Electronic Bank Statement file is uploaded. Once the upload happens the Planning Level F0 is not getting any values for Business Area and hence the Cash Position is showing incorrect values.
    The requirement is to have the cash position Business Area Wise.
    For this requirement, the field status for the Business Area has been maintained as required.
    When the amount is paid to the vendor, the Business Area is getting captured and reflected in FF7A Cash Position as well correctly.
    However, when the bank statement file is uploaded through FF_5, the BA is getting captured only for the outgoing clearing account (Planning Level B1) but not to the main bank account (Planning Level F0) thereby the cash position is not getting updated with correct values.
    The Document splitting is not active for the Company Code.
    Need help to identify the reason as to why the business Area is not getting captured for the Main Bank Account upon clearing from the Outgoing Bank Account during EBS
    Thanksu2026.
    Best Regards,
    Vas

    Hi
    Business area updations will not get updated through automatic postings like tax line generations, etc.  You will have to search for some note for updations.  Otherwise while preparing blance sheets for business area, you can make adjustment postings.
    Regards,

  • Substitution rule for Business place and section code

    Hello Friends,
    We have a business place and a section code. I want to write a substituion rule for vendor invoice for business place and section code.
    When i see in header, i am not find BUPLA and SECCO in header. I am finding them in line item. How do i get these fields in header segment. I tried substution rule in line item, but the tds is not deducted.
    Thanks
    SK

    hi SK,
      i am not understand your problem. Previously i face one problem regarding business place and section code. While booking invoices and advance payments the user forgets to specify business place or section code and some times he specifys wrong business place also. Basing on business place or section code we cant restrict the users because there is no authorisation object.
    i created one validation that if my business area is 1000. then substitute the business place field with section code.
    we have business place individual business area wise so i created this substitution.
    Regards,
    Sankar

  • How to install the EUL5 Business Area and seeded reports for Ora Apps 11i

    Hi All,
    We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i.
    I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to where to look foe the scripts would be really appreciated.
    I am using disco version 10.1.2.48.18.
    Thanks.

    Hi,
    You need to work though Metalink Note 313418.1.
    Rod West

  • "Validation" enabled for the composite and my testsuites are not working

    I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
    I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
    then it works and the process will be completed.
    But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
    I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
    Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
    I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

    Hello there, RevDebMN.
    The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Particularly useful, in your case:
    Mail Connection Doctor shows one or more red dots () in the account Status column
    Check your Incoming IMAP or POP and Outgoing SMTP email account settings
    Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
    After you have the correct email service provider settings, make sure Mail is configured properly.
    Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
    What alert message is shown in the Mail Connection Doctor "Details" column affected account?
    Click here if a "Could not connect to this (server type) server…" message appears
    Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
    If the issue persists, then you'll want to remove the account and then add it again using this article:
    Mail (Mountain Lion): Remove accounts
    http://support.apple.com/kb/PH11794
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Link of Business Area and Company Code

    hii
    from which table i can find the link of Business Area and the Company Code....
    thanx in advance
    abhishek

    FILCA  table
    RCOMP and RBUSA

  • Validation check for Tcode FB10 and FB60 - FICO.

    I have an issue in validation check for Tcode 'FB60' and  'FB10'.
    there are two exits coded for these transactions through transaction 'GGB0'.
    details for the two exits.
    exit 1.
      when posting a vendor invoice, the network status is checked whether it is completed or not - if status is completed error message is raised.
    exit 2.
      when posting vendor invoice - for G/L Account in 60000 - 69999 series network should not be posted. if posted error message is raised.
    when these two exits are entered via a prerequisites in code 'KGB' a code is generated automatically to call these exits- when transaction 'FB10' 'FB60' is executed.
    Issue:
    for  code 'FB10' is executed with network with status completed and with G/LP account in 60000 - 69999 series -
    error message is raised in sequence i.e. exit 1 is raised and then exit 2 is raised.
    but for code 'FB60' if condition for exit 2 is  not satisfied then exit 1 message is raised.
    but it should be in sequence in raising the error message i.e. exit 1 and then exit.
    Even though for both the transaction the auto generated code is similar and even exits are similar - but it is execution in raising the error message is diffrent.
    - Since it is auto generated code i am able to figure out the issue.
    i would appreciate if any one could help me out in this issue.
    thank you,
    with dregs,
    Karthik.

    Hi,
    I have tried what you have suggested. But still validation is not working
    I have done the following validation based on your inputs.
    Prerequisite
    Company Code = '1265' AND Transaction code = 'FB60' AND
    Account Type = 'K' OR
    Transaction code = 'F-43' AND Account Type = 'K' OR
    Transaction code = 'F-48' AND Account Type = 'K'
    Check
    Business Place > '' AND Business Place = Section Code
    Message
    E - Error Message
    Still it is not working.
    Please suggest.
    Best Regards
    Shashikanth.M

  • Checking for business area while posting

    i have to check for business areas balancing during posting document
    eg., when we get interest income from a bank account under business area X it should be credited to an account with same business area X.
    Dr Bank - X
    Cr Interest income - Y
    this should not occur
    so user wants to get a error message when the business areas does not match.
    Can any one tell how this can be done?(does fi validations help in this?)

    Hi,
    YOu can do it by using the exits/BADIs available with your transaction. Inside the enhancement you can write the code for comare and message.
    What is the transaction you use for that? Try for Exits in trnsaction SMOD and BADIs in transaction SE18.
    Regards,
    Renjith Michael.

  • How to offset Cenvat suspense and cenvat clearing

    Hi
    Please tell me how to clear cenvat suspense and cenvat clearing in case of sales return and purchase return? pls give the T-codes and the entries
    thanks in advance

    Hi Dina/Experts,
    I would like to know the Accounting that takes place while Capital project is setup to collect costs as follows:
    Supplier Cost for Architectural drawings: $2,000.00
    Supplier Invoice for building Contractor: $5,000.00
    Supplier Invoice for building Permit Penalty: $ 100.00
    $7,100.00
    Employee Labor project Management: $1,400.00
    Employee Expense Report for Misc. Costs: $ 800.00
    Cost for Usgae of Company Car: $ 150.00
    TOTAL COSTS FOR PROJECT X $9,450.00
    =======
    What is the Accounting in AP for the Capital Project? What is the Accounting that would take place once the Costs are interfaced to Projects fom AP?
    What is the Accounting that takes place when you generate Asset Lines if at all?
    What is the accounting that takes place once the Project Cost are Interfaced to Fixed Assets?
    Thanks,
    Arun

Maybe you are looking for