Validation Error - An error occured executing the provided SQL Command

Hi All,
I am new to using SQL Server in general (2008 R2) and am trying to change the source location for multiple packages in order to obtain our data from a more reliable environment.
I have created a copy of the target database where the data will be loaded, amended the source and target connection managers and ran through the packages to ensure they work, which many do.
We are changing the source from a local server to a cloud based server and when running a package that literally truncates target table, selects * from source, and inserts data to target I get a validation error "An error occurred executing the provided
SQL Command "Select *...." The connection has been disabled" and "component ADO NET Source failed validation and returned validation status "VS_ISBROKEN"".
The table structure from the 2 sources is the same and I have even recreated the data flow tasks to ensure the metadata has updated. When selecting 100 rows or even 5,000,000 rows from source the package runs fine but will fail as above
when selecting &* (around 9.5 million rows).
I'm not sure if this is due to the new data source being web based or if it could be some erroneous data in the table that isn't being selected when limiting to 5 milling rows etc.
I have spend hours trying to figure out what the issue could be (doesn't help being new to SQL Server) so any guidance would be hugely appreciated!!!
Thanks,
Louis.

Hi All,
Unfortunately I don't believe any of the above are the issues.
Our current working project/packages run via an SQL agent job daily. To test and ensure the package in question ran outside of the agent WITHOUT changing the ADO NET Source I exported the package (that runs daily) and ran it locally,
to which it failed.
I then edited the select statement from 'select * from [table]' to 'select top(100) from [table] to which it ran without error.
So in summary:
Package will run fine if run as part of the agent job (with multiple other packages)
Package will not run from File System when selecting * from the source table
Package will run from File System when selecting limited rows
Could this be something to do with permissions? The errors I get are:
An error occurred executing the provided SQL command: "select * from [table]". The connection has been disabled.
"component" ADO NET Source"(396") failed validation and returned validation status "VS_ISBROKEN".
Thanks,
Louis.

Similar Messages

System error 86 has occurred. The specified network password is not correct. - despite the NTLMv2 fix

After the Windows 2008 R2 64 bit server got below 2 updates a network share is no longer available. And trying to remap it with correct credentials (that work on a Windows 8.1 64 bit) gives this error: "System error 86 has occurred. The specified network
password is not correct."
Local Policies -> Security Options -> Network Security: LAN Manager Authentication Level
is already set to "LM and NTLM - use NTLMV2 session security if negotiated"
In fact this is how it was working earlier. And it hasn't been changed.
Below 2 updates were installed in past few days:
Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.185.3528.0)
Update for Windows (KB974405)

Hi,
Does the network share a DFS share? If so, please install the hotfix below to check the results.
You cannot access a DFS share by using a valid user account in Windows Server 2008 R2, in Windows 7, in Windows Vista or in Windows Server 2008
http://support.microsoft.com/kb/2549311
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My iphone is a 3g and I was updating it's sofware from 4.1 to 4.2 when an error called 1604 occured during the restoration. what should i do?

my iphone is a 3g and I was updating it's sofware from 4.1 to 4.2 when an error called 1604 occured during the restoration. what should i do?

Shifaau wrote:
now an error code by 1015 comes up.
Again...Search the forums or Google for the error message appearing and follow the troubleshooting steps provided.

Error "An exception occurred within the external code..." when stopping LabView

I am having an error "An exception occurred within the external code called by a Call Library Node...", see the attached image, when I am trying to stop LabView. As a result of the error, the tag engine doesn't close normally.
I am using LabView 7.1 with DSC. I read values from a LNS (LON) OPC-server.
Is this a known issue and is there any way to repair it? I haven't noticed any direct consequences because of the error except that when I re-start LabView and the close it again without having first rebooted the computer, tag engine sometimes starts again when it should stop. This is fixed by always rebooting the computer before restarting LabView. I am getting suspicious that there might be some strange behaviour because the error says "it might have corrupted LabView's memory".
For example, sometimes when I have made a copy of an input number field to another, they follow each other's value changes even though there is no connections between them.
Simo Martikainen
Message Edited by Simo Martikainen on 12-17-2008 03:11 AM
Attachments:
LabView stop error.JPG ‏45 KB
TAGENGINE.JPG ‏16 KB

Especially in earlier versions of LV these sorts of errors were common if the call wasn't made just right or the parameters were set up incorrectly.
Where did you get the DLL from? Was it written internally or did it come from another vendor?
Try building a DLL call into a very small, simple application. Do you see the same issue?
Are there multiple calls to the same DLL in your code? If so, is there problems with all of them?
Can you track it down to a specific function that you are trying to access that is causing the problem?
Is there any indication of a memory leak?
Finally any additional information you can provide would helpful.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to resolve this issue in windows 7 ?? "An Internal Virtual Machine error (3) has occurred. The virtual machine will reset now."

Dear Friends,
Do kindly help me out on this issues. I have installed Microsoft Virtual PC 2007 in my PC and i am trying to create an new virtual machine for several testing. I have a clean ISO image of windows 7 . I import through Captured ISO option. The system tries
to configure the OS . But during the configuration i am getting this error.
*Your PC needs to Restart.
Please hold the power button.
Error Code: 0X0000005D
Parameters:
0x03063A09
0x756E6547
0x49656E69
0x6C65746E
An Internal Virtual Machine error (3) has occured.
The virtual machine will reset now.
I have Enabled the virtualization settings in BIOS.
Kindly help me out to resolve this issue.
Base Machine Platform : Windows 7 - 32 Bit and Windows 7 - 64 Bit.
ISO Image : windows 7 - 32 bit.

Error Code: 0x0000005D: Your
CPU is not compatible.
Ref : http://www.winvistatips.com/internal-virtual-machine-error-3-has-occurred-t520964.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Error to execute the script through command prompt

I tried to execute the script through command prompt. I got some following error. Could you please advice me how to rectify this.
cscript D:\JS\Test.js
Microsoft (R) Windows Script Host Version 5.6
Copyright (C) Microsoft Corporation 1996-2001. All rights reserved.
D:\JS\Test.js(1, 1) Microsoft JScript runtime error: 'app' is undefined.
Thanks,
Prabudass

I haven't use CS for quite some time and file associations may not work with the command prompt.
You can try using Windows Explorer to browse to a .js file then right click on that file. From the popup menu choose Open With. Even if you see Photoshop in the file list choose Browse at the bottom. Browse to Photoshop and make sure to check 'Always use selected program...'
If that doesn't work you will need to create an action that runs your script and make a droplet from that action. You can then use the droplet in the command prompt. You may also need to create a 'dummy' image file to launch the droplet with if you script doesn't require an open document at startup. See http://www.ps-scripts.com/bb/viewtopic.php?t=967

System error 3 has occurred. The system cannot find the path specified

Enterprise Manager 12c Release 2 - 12.1.0.2.0
Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
Deployment Phase Name: Secure Agent
Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
Recommendation:
Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
Any ideas? thanks

I installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
ssh WinHost
The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
oracle@WinHost's password:
Last login: Wed Sep 19 17:26:40 2012 from SomeHost
oracle@WinHost ~
$ cygrunsrv -h
Usage: cygrunsrv [OPTION]...
Main options: Exactly one is required.
-I, --install <svc_name> Installes a new service named <svc_name>.
-R, --remove <svc_name> Removes a service named <svc_name>.
----------------- blah blah blah ------------------------------------
Report bugs to <[email protected]>.
oracle@WinHost ~
$ date
Thu, Sep 20, 2012 10:10:01 AM
oracle@WinHost ~
$ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
oracle@WinHost /cygdrive/c/oracle/product/emagent12
$ ls -la
total 0
drwx------+ 1 oracle None 0 Sep 20 09:55 .
drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
Thanks

How to find out the failed sql command and its data from DEFERROR

Hi,
has anybody a procedure or some other possibilities to read the content of column USER_DATA of the advanced replication view DEFERROR in order to find out the failed sql command and its column values?
Thanks in advance.

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

Error RCIRAS0546, failure occured while the report was being processed

Hello all,
We use Crystal Reports 2008 V1 server on Linux. With 2 reports now we get the error when viewing the report from the Central Management Console (CMC)
"Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator. [RCIRAS0546]"
In de /var/log/messages, I get messages like these:
Sep 28 17:37:30 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report file 2:11154 (RCIRAS0568)
Sep 28 17:37:40 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report '10. LEN Rapportage per scenario (kapitaallasten, investeringen, algemene gegevens) (V1)' (id=11154) for user 12 (RCIRAS0567)
I tried several parameters on the CrystalReportsProcessingServer, like increasing/decreasing the Maximum Current Jobs and Number of Prestarted Children. None of these make a difference. Als the error occurred when viewing the report as Administrator.
The reports has a dynamic parameter, wtih content coming from the database (drop-down list). When selecting one value the report is viewing fine. With a selection of more values the error occurred. In Crystal Reports 2008 there is no problem.
I restarted the CRProcessingServer with -trace. In the trace I see the following lines:
It seems that several subprocesses start for retrieving data based on the parameter values.
After the crash of the first child, the above mentioned error occurs.
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:82) PageChildDesc constructor (id=3)
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:5489) doCreateChild() created a new child 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6814) cleanupChildren() starting
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||[ProcWorkerManager.cpp : 6854] RAS-CORE-METRICS (before cleanup) number of child processes = 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6979) child id=1 crashed
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6994) cleanupChildren() removing child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:101) PageChildDesc destructor (id=1)
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7028) cleanupChildren() marking as stopped: worker id=1 in child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorker.cpp:2703) stopping worker id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7168) cleanupChildren() ending
Does someone know this problem and what to do about this?
With kind regards,
Pim van Stam
SvSnet

We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

Error is coming when executing the report in bex

hai experts,
any body help me in this matter.
when i execute the qurey in bex its showing error message coming with popup box.
Error is showing like this.
"no value found"
" Exception 1 when calling WB_HTML_HELP_URL_GEToccured"
but when i click on "OK" button its showing result.can any body tell me why its showing error message like this .
regards
mahesh

you default method is WEB so its useing URl to open the results, change the setting to use analyzer(XLS) and update your GUI Front End patch.

Error when trying to execute the query

try { stm = conn.createStatement(); String query= "SELECT RAWTOHEX(secondary_uuid)from entity_to_entity_relationship where primary_uuid ="+oracleUuid(fwi.getProfileUuid())+ "or secondary_uuid="+oracleUuid(fwi.getProfileUuid())+"and type ="+oracleString(RELATIONSHIP_PUBLINK); DBDecoder decoder = new DBDecoder(); List results = decoder.decode(stm.executeQuery(query));
When I try to execute this block I am getting an error, Can some one tell me whats happening here
Error in .execute, SQLException: java.sql.SQLException: Invalid column type: getOPAQUE not implemented for class oracle.jdbc.driver.T4CVarcharAccessor

mighty_123 wrote:
When I try to execute this block I am getting an error, Can some one tell me whats happening hereAs a guess perhaps you are mixing pieces of different drivers. That is best case. Worst case is that you have a bug in the driver.

Error in Bex Analyzer including the filter button command in Callback macro

Hello,
I have the following problem with the function filter button in the Bex Analyzer included in the callback macro:
Because of using 2 hierarchies in the filter the setting drill down to level 2 in the query gives no right output in the Bex Analyzer. The drill down level 2 is not shown. SAP recommends the include of a filter button to solve this problem. With a filter button in the sheet the problem was solved.
But after including the filter button command in the callback macro I get an error in MS Excel.
The callback macro starts, the filter was set by the user and the data was refreshed. Because of the refreshing of the filter the callback function the callback function starts several times. After setting the filter the first time, the following macro avoids the several starting of the set filter function:
Sub CallBack(ParamArray varname())
On Error GoTo err_handler
   Dim lRange As Range
   Set lRange = varname(1)
'Filter entfernend/delete filter
Dim ZeichenFilter As Long
ZeichenFilter = Len(Sheet4.Cells(41, 3).Value)
Dim Filter1 As String, Filter2 As String
Filter1 = Left(Sheet4.Cells(28, 3), ZeichenFilter)
Filter2 = Left(Sheet4.Cells(41, 3).Value, ZeichenFilter)
If Filter1 <> Filter2 And Filter2 <> "" Then
    onAction = True
    onAction = False
End If
'Filter setzen mit einmaligem durchlaufen/set filter and run one time
If onAction = False Then
    onAction = True
    Call Sheet4.BUTTON_55_Click
    onAction = False
End If
exit_handler:
    Exit Sub
err_handler:
    MsgBox Err.Description, vbOKOnly, "Error in " & " setMusterSub"
    Resume exit_handler
End Sub
After the filter was set the callback macro starts the second time. Then the Bex Analyzer erros with the sandglass. The working on VBA is possible, but not the working with Bex Analyer . Values in Excel werent shown.
How can I avoid this error?

Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit

Member acces profile error(A table name, specified in an sql command)

Hi friends,
In my bpc application(A) below 3 dims are secure dims.
1. entiiy (std)
2. category (std)
3. location (custom dim)
while defining one member access profile,
Read Only      : CATEGORY 100
Read & Write      : CATEGORY 200,500
for whatever combinatio i use, for other secure dims (eg: category,location where base member,or parent members ) i'm getting below error message
A table name, specified in an sql command, is unknown.
We are on bpc75nw sp04.
Pls suggest us .
dump(st22):
Short text
    A table name, specified in an SQL command, is unknown.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UJE_MEMACCESS_CACHE========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
    procedure "REMOVE_MEMACCESS" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An invalid table name "/1CPMB/RDWCSUMAS" was specified in an Open SQL command:
    Due to one of the following reasons, the error occurs only at runtime:
    - the table name was specified dynamically, or
    - the SELECT clause, WHERE clause, GROUP-BY clause, HAVING clause, or
      ORDER-BY clause was specified dynamically.
Thanks,
naresh
Edited by: Naresh P on Feb 19, 2011 10:40 AM

Hi Naresh,
As far as I know You have specify Explicit Access to all the dimensions mentioned as Secured in your Application.
You can't skip the secured Dimesions.
In your case if you want to restrict only one dimension for 1 Member Access Profile then give Read & Write access to other 2 Dimensions and select ALL members.
This might solve your problem.
Hope it helps.
Chaithanya

Unable to execute the following sql statement in Jdev10g -- custom sql quer

Hi All,
I have requirement where I need to execute the below Query String through Jdev10g to Sql Server 2005.
Query string -- select * from table where #InputString
<< Input String -- col3 like 'col%' and col1 like 'col2%' ...... >>
Here the Input string will be generated by the client and the results will be transferred back to the client. Can any one help how to do this? Input string would like
col1 like 'col%' and col2 like 'col2%' and so on.. and this is dynamic which can be changed in runtime like col3 like 'col3%' and col1 like 'col1%' and so on..
I have tokenized the string and assinged the values and executed the custom string through Input parameters for all the fileds instead of only search string .. since table having so many null fields not receiving the exact row counts and records.. hence I have to pass only the Input string as I mentioned like Query String.. If some body got the same concern please let me know..
Your help would be greatly appreciated..
Thanks & Regards,
Khasim

Hi All,
Even though the answer is a bit tedious by formulating the where clause with all fields and dynamic parameters, I achieved the goal. But we do have another option to use orcl:query-database in the transformation. But this one give tedious results when you are trying to achieve multiple rows from this. If some one have a better idea to utilize this query-database function, you are most welcome.
Thanks & Regards,
Khasim

The PL/SQL command (select/update) was hanged for long time

We have a proc program to access a 160 rows table (F_TRDATA), however, it always hanged for a long time, then it was retarted by our defence process.
(1)Table structure:
SQL> desc F_TRDATA;
Name Null? Type
SCP_NBR NUMBER
A_INDEX NUMBER
A_BITMAP LONG
SQL> select index_name, column_name from user_ind_columns where TABLE_NAME='F_TRDATA';
INDEX_NAME
COLUMN_NAME
I_F_TRDATA
SCP_NBR
I_F_TRDATA
A_INDEX
(2)Use DBLINK between two different machines:
LONG rtc;
char f_tabname[100];
EXEC SQL BEGIN DECLARE SECTION;
char srvname[100];
char dblink_name[100];
EXEC SQL END DECLARE SECTION;
sprintf(srvname,"%s",(const char*)STRING(INOBJECT::srvname).ToUpper());
EXEC SQL SELECT DB_LINK INTO :dblink_name FROM ALL_DB_LINKS WHERE OWNER=:srvname;
     db.setLastSqlCode(sqlca.sqlcode);
     if (sqlca.sqlcode!=0)
          TRACE("SELECT DB_LINK error "<<sqlca.sqlerrm.sqlerrmc)
          return VAL_ERROR;
     else
          TRACE("SELECT DB_LINK OK");
sprintf(f_tabname,"F_%s@%s",(const char*)STRING(parent->getClassName()),(const char*)STRING(dblink_name));
TRACE_SHOW(f_tabname);
rtc=get_free_ri(f_tabname);
EXEC SQL COMMIT;
(3)get_free_ri ():
memset(s_ln,0,800);
sprintf(s_ln,"SELECT A_BITMAP FROM %s WHERE A_INDEX=:a AND SCP_NBR=:b \
          FOR UPDATE OF A_BITMAP",tab);
EXEC SQL PREPARE S FROM :s_ln;
if (sqlca.sqlcode)
{TRACE(""<<s_ln);
TRACE(""<<sqlca.sqlerrm.sqlerrmc);
EXEC SQL DECLARE C_FREE_RI CURSOR FOR S;
if (sqlca.sqlcode) {TRACE("DECLARE C_FREE_RI : "<<sqlca.sqlerrm.sqlerrmc)};
memset(s_ln,0,800);
sprintf(s_ln,"UPDATE %s SET A_BITMAP=:a WHERE A_INDEX=:b AND SCP_NBR=:c",
     tab);
EXEC SQL PREPARE S FROM :s_ln;
EXEC SQL EXECUTE S USING :bitmap,:rand_ind,:scp;
switch(sqlca.sqlcode)
{case 0: /* FOUND */
(4)Trace tools:
select SQL_TEXT from v$sql where HASH_VALUE=(select SQL_HASH_VALUE from v$session where process=10775);
select SQL_TEXT from v$sql where HASH_VALUE=(select PREV_HASH_VALUE from v$session where process=10775);
select XIDUSN,object_id,locked_mode from v$locked_object where object_id =
(select l.object_id from v$locked_object l,v$session s where s.sid=l.session_id and s.process=10775);
select s1.SEQ#,s1.P1,s1.P1TEXT,s1.P2,s1.P2TEXT,s1.P3,s1.P3TEXT,s1.EVENT,e.PARAMETER1,e.PARAMETER2,e.PARAMETER3,s1.WAIT_TIME,s1.SECONDS_IN_WAIT,s1.STATE from
v$session_wait s1,v$session s2,v$event_name e where s1.sid=s2.sid and e.name=s1.EVENT and s2.process=10775;
(5)Trace info:
SQL> start P6-3.sql1
SQL_TEXT
SELECT "A1"."A_BITMAP" FROM "F_TRDATA" "A1" WHERE "A1"."A_INDEX"=:A AND "A1"."SCP_NBR"=:B FOR UPDATE
OF A1."A_BITMAP"
SELECT "A1"."A_BITMAP" FROM "F_TRDATA" "A1" WHERE "A1"."A_INDEX"=:A AND "A1"."SCP_NBR"=:B FOR UPDATE
OF A1."A_BITMAP"
SQL_TEXT
SELECT "A1"."A_BITMAP" FROM "F_TRDATA" "A1" WHERE "A1"."A_INDEX"=:A AND "A1"."SCP_NBR"=:B FOR UPDATE
OF A1."A_BITMAP"
SELECT "A1"."A_BITMAP" FROM "F_TRDATA" "A1" WHERE "A1"."A_INDEX"=:A AND "A1"."SCP_NBR"=:B FOR UPDATE
OF A1."A_BITMAP"
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
      1897 1413697536 driver id                                                                 1
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
#bytes                                                                    0
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
SQL*Net message from client
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
driver id
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
#bytes
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
                                                                          0          197725
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
WAITING
      SEQ#         P1 P1TEXT                                                                   P2
P2TEXT                                                                   P3
P3TEXT
EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
SQL> spool off
SQL> start P6-4.sql1
SQL_TEXT
UPDATE "F_TRDATA" "A1" SET "A_BITMAP" = :A WHERE "A1"."A_INDEX"=:B AND "A1"."SCP_NBR"=:C
UPDATE "F_TRDATA" "A1" SET "A_BITMAP" = :A WHERE "A1"."A_INDEX"=:B AND "A1"."SCP_NBR"=:C
UPDATE "F_TRDATA" "A1" SET "A_BITMAP" = :A WHERE "A1"."A_INDEX"=:B AND "A1"."SCP_NBR"=:C
SQL_TEXT
UPDATE "F_TRDATA" "A1" SET "A_BITMAP" = :A WHERE "A1"."A_INDEX"=:B AND "A1"."SCP_NBR"=:C
UPDATE "F_TRDATA" "A1" SET "A_BITMAP" = :A WHERE "A1"."A_INDEX"=:B AND "A1"."SCP_NBR"=:C
UPDATE "F_TRDATA" "A1" SET "A_BITMAP" = :A WHERE "A1"."A_INDEX"=:B AND "A1"."SCP_NBR"=:C
      SEQ# EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
       657 SQL*Net message from client
driver id
#bytes
      SEQ# EVENT
PARAMETER1
PARAMETER2
PARAMETER3                                                        WAIT_TIME SECONDS_IN_WAIT
STATE
                                                                          0          311573
WAITING
SQL> spool off
(6)We found no locked sessions, and the proecess was hanged when it executed SELECT and UPDATE command. However, the system CPU traffic and I/O traffic was not high.

up?
up ... in the sky?
up ... my shirt sleeve?
up ... above the streets and houses, rainbow's flying high, everyone can see a rainbow, in the sky.... paint the whole world with a RAINBOW!
up ... yours?

Validation Error - An error occured executing the provided SQL Command

Similar Messages

Maybe you are looking for