Validation error corrupts component tree?
I've got a strange problem trying to use validation on input fields.
The basic setup is as follows:
I've got a page divided into two parts with separate h:form tags, the one holding a dataTable with some elements and the other showing the element details in inputFields once an item is selected in the dataTable via a commandLink. A commandButton on the detail side allows you to update the values of the selected item which is being reflected in the dataTable on reload. So far so good.
Here comes the strange part:
All the inputFields are marked required. Now once you leave a field empty and try to submit the form, you get a validation error as expected. BUT if you now select a different element from the dataTable, ONLY the field whose validation formerly failed is being updated, the other fields still show the same value as before. The backing bean method that belongs to the commandLink is being executed, and the underlying data object of the input fields is being set properly, only the values in the component tree aren't updated. This behaviour persists until you enter a valid value in the formerly invalid input field and submit. Debugging shows that as long as at least one field has had validation errors, only the getter of these backing beans properties are being invoked during render response phase, as opposed to the "normal" case where the getters of all the backing beans properties are being called.
For some reason, the render response phase seems to ignore the other components in the component tree when there was some validation error on one or more fields.
Another interesting observation:
This is the behaviour if I don't specify an action attribute in the commandLink selecting an element from the dataTable, as I want to return to the same page again. But if I define a navigation case that brings me to the same page and put that into the action attribute, the problem doesn't occur. Unfortunately this is no option for me, as I'm aiming to do all this with ajax.
I've created a simple example so you can try out yourself:
test.jsp:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<html>
<head>
<title>validator test</title>
</head>
<body>
<f:view>
<h:form id="form1">
<h:dataTable id="table" value="#{bean.datas}" var="data" binding="#{bean.table}" border="1">
<h:column>
<h:commandLink actionListener="#{bean.selectData}" value="#{data.string1}" />
</h:column>
<h:column>
<h:outputText value="#{data.string2}" />
</h:column>
</h:dataTable>
</h:form>
<hr />
<h:form id="form2">
<h:inputText value="#{bean.data.string1}" id="field1" required="true" />
<h:inputText value="#{bean.data.string2}" id="field2" required="true"/>
<h:commandButton value="submit" />
</h:form>
</f:view>
</body>
</html>Bean.java:
needs to be defined in faces-config.xml as bean "bean" with session scope
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.event.ActionEvent;
public class Bean {
private Data data;
private List<Data> datas;
private HtmlDataTable table;
public Bean() {
datas = new ArrayList<Data>();
datas.add(new Data("data1value1","data1value2"));
datas.add(new Data("data2value1",""));
public void selectData(ActionEvent event) {
data = (Data)table.getRowData();
public List<Data> getDatas() {
return datas;
public Data getData() {
return data;
public void setData(Data data) {
this.data = data;
public HtmlDataTable getTable() {
return table;
public void setTable(HtmlDataTable table) {
this.table = table;
public class Data {
private String string1;
private String string2;
public Data(String string1, String string2) {
this.string1 = string1;
this.string2 = string2;
public String getString1() {
return string1;
public void setString1(String value) {
string1 = value;
public String getString2() {
return string2;
public void setString2(String value) {
string2 = value;
}My system setup:
WinXP Professional
JDK 1.6.0-b105
Tomcat 5.5.20 (also tried 6.0.7)
JSF RI 1.1.02_b08 (also tried 1.2_04-b10-p01, different but anyway not expected behaviour with MyFaces 1.1.5)
Thanks for any input,
Harry.
Is there noone here who can tell me if this is behavior like specified or if I miss some point?
A possible solution seems to be telling JSF programmatically to rebuild the view root. Does anyone if this is possible?
Similar Messages
-
Calendar Component and validation errors
Hi,
For the first time I am trying to use the Calendar component to insert a date field in my SQL Server db.
The problem: I can insert a date column only if its of type java.sql.Timestamp.
As Timestamp extends the date object..
I tried to bind the selectedDate field as <Timestamp> Object[refractored in my class file] and when i tried to update by DB it throwing a Validation error.
If I bind it as a Date Object directly I am getting an EvaluvationException
as date objects cannot be inserted directly
Am i missing something here or is there a proper way of implementing it.Its a fairly direct question about object conversion problem in creator
Basically the selectedDate parameter of the JSC Calendar component
needs to be pointed to a Date Object
If we need to insert that date information to a SQL Server column the equivalent data type should be java.sql.Timestamp which extends Date.
So if we point the selectedDate parameter as a Timestamp object the creator throws an illegal argument exception.
Can some one clarify how to resolve this issue? -
Dear Friend
I have got below error message in the exchagne server 2013 while i tried to open the console of delegation mailbox . It was comes once i was deploy lync server 2013 in the same forest.
warning
The object has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control entry defines the ObjectType 'd819615a-3b9b-4738-b47e-f1bd8ee3aea4' that can't be resolved..
The access control entry defines the ObjectType 'e2d6986b-2c7f-4cda-9851-d5b5f3fb6706' that can't be resolved..
If you feel to ask to more clarification, please let me know.
Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.Hi,
Based on the description, you got warnings when you tried to click the mailbox delegation option of mailbox properties in EAC. Is it right?
Did this issue affected only one user mailbox or all of them?
From the error message, it seems that this issue is related to the corrupt permissions. Please use the
Get-MailboxPermission cmdlet to retrieve permissions on a mailbox to check result.
Best regards,
Belinda Ma
TechNet Community Support -
Modifying component tree after validation failures
I'm reworking a JSF web app to use JSF's validation capabilities. As it is now, the validation all occurs in various action methods, during the invoke application phase. I volunteered to do this update to separate the business processing code from the data validation code as well as take advantage of the fact that using JSF validation guarantees that the data in the model won't be updated unless the user data is valid.
So, I've run into one thing that I can't figure out how to accomplish using JSF's validation capabilities.
Here's the old form...
<!-- CITY -->
<h:inputText id="city" value="#{userDetailsBean.city}" rendered="#{userDetailsHandler.showCityInput}"/>
<h:selectOneMenu id="cityFromList" value="#{userDetailsBean.city}" rendered="#{userDetailsHandler.showCityList}">
<f:selectItems value="#{userDetailsHandler.cityDropList}"/>
</h:selectOneMenu>
<!-- STATE -->
<h:selectOneMenu id="state" value="#{userDetailsBean.state}">
<f:selectItem itemValue="#{null}" itemLabel=""/>
<f:selectItems value="#{userDetailsHandler.statesList}"/>
</h:selectOneMenu>
<!-- ZIP -->
<h:inputText id="zipCode" value="#{userDetailsBean.zipCode}"/>Note that there are two components representing the city. When the form is first presented, the inputText is shown. Then, if the address doesn't validate, we present the selectOneMenu after filling userDetailsHandler.cityDropList with the appropriate city options (based on the zipcode).
So, can anybody think of a good way (from within a custom JSF validator) to set the appropriate properties in userDetailsHander in order to make the selectOneMenu render and show the proper options? Feel free to suggest a change in architecture as well. I'm not stuck on using this userDetailsHandler that was previously in use.
I figure I could always right a custom validator that takes in a bean as an attribute in the tag and the bean. On a validation error, the validator could then setup the appropriate properties in the bean. This just seams a little hacky.
By the way, the validator will probably be written to take in the names of the city, state, and zip components. I'm following the multi-component validator idea that is presented in Core Java ServerFaces, 2nd Edition. (The validator takes in the component names, which it uses to get the local values, then performs multi-component validation work.) I guess I could pass both the cityTextInput and cityListInput components into the validator, right?Here's what I have so far for my validator's validate() method. Some stuff has been omitted to make this a smaller code chunk. I've attached this validator to the zip component.
public void validate(FacesContext facesCtx, UIComponent uiComponent, Object value)
throws ValidatorException {
// get a handle to the other components
// city
UIComponent cityTextComp = uiComponent.getParent().findComponent(cityTextComponent);
EditableValueHolder cityValHolder = (EditableValueHolder) cityTextComp;
// state
UIComponent stateComp = uiComponent.getParent().findComponent(stateComponent);
EditableValueHolder stateValHolder = (EditableValueHolder) stateComp;
String city = (String) cityValHolder.getLocalValue();
String state = (String)stateValHolder.getLocalValue();
String zip = (String) value;
System.out.println("Validating " + city + ", " + state + " " + zip);
boolean isValid = GenericValidator.validateAddress(city, state, zip);
if (isValid) return;
// assume this is an invalid city for the zipcode given
// I've removed the code for the other possibilities since it
// doesn't pertain to my issue here
// Setup the city list
UIComponent cityListComp = uiComponent.getParent().findComponent(cityListComponent);
UISelectOne cityListSelectOne = (UISelectOne) cityListComp;
List<String> cities = GenericValidator.listCitiesForZip(zip);
// add the appropriate items to the selectOneMenu
for (String c: cities) {
// WHAT DO I DO HERE?
cityListComp.setRendered(true);
cityTextComp.setRendered(false);
// now signal a validation exception
FacesMessage msg = <some faces message>;
throw new ValidatorException(msg);
}If I can just figure out how to add the appropriate items to the h:selectOneMenu from within the validator code I presented, I'm home free, I think. -
i wrote a small app that read a COLLADA instance document and convert it to a html document. First I wrote some xsl stylesheets and now I'm using a JAXP DOM parser to parse the instance document and a JAXP xslt transformer to perform the transformation.
When I use a non-validating parser it seems all work well but when i try to use a validating parser i get this message error:
org.xml.sax.SAXParseException: src-resolve: Cannot resolve the name 'xml:base' to a(n) 'attribute declaration' component.
What does it mean?
When I'm at my home pc,I get the error above but when I'm at university lab pc I don't get any error. WHY!? I'm using the same files.
Thx for your helpi'm using jdk 1.5.0_11 and here is my java code.
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.FactoryConfigurationError;
import javax.xml.parsers.ParserConfigurationException;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.w3c.dom.Document;
import org.w3c.dom.DOMException;
// For JFileChooser
import javax.swing.*;
// For write operation
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerException;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.TransformerConfigurationException;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamSource;
import javax.xml.transform.stream.StreamResult;
import java.io.*;
public class StylizerMio2 {
// Global value so it can be ref'd by the tree-adapter
static Document document;
// Constants you'll use when configuring the factory
static final String JAXP_SCHEMA_LANGUAGE="http://java.sun.com/xml/jaxp/properties/schemaLanguage";
static final String W3C_XML_SCHEMA="http://www.w3.org/2001/XMLSchema";
//Constants used to specify the schema in the application
static final String schemaSource="COLLADASchema_141.xsd";
static final String JAXP_SCHEMA_SOURCE="http://java.sun.com/xml/jaxp/properties/schemaSource";
public static void main(String[] argv) {
/*if (argv.length != 2) {
System.err.println("Usage: java StylizerMio stylesheet xmlfile");
System.exit(1);
// Generating a parser
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
//Configure the factory to generate a namespace-aware,validating parser
factory.setValidating(true);
factory.setNamespaceAware(true);
try{
factory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
// Associate a document with a schema
factory.setAttribute(JAXP_SCHEMA_SOURCE, new File(schemaSource));
catch (IllegalArgumentException x) {
// Happens if the parser does not support JAXP 1.2
x.printStackTrace();
// Associating the document with the schema
try {
JFileChooser chooser = new JFileChooser();
ExampleFileFilter daeFilter = new ExampleFileFilter();
daeFilter.addExtension("dae");
daeFilter.setDescription("documenti istanza COLLADA");
chooser.setFileFilter(daeFilter);
chooser.setCurrentDirectory(new File("."));
int returnVal = chooser.showOpenDialog(null);
if(returnVal == JFileChooser.APPROVE_OPTION) {
System.out.println("You chose to open this file: " +
chooser.getSelectedFile().getName());
File stylesheet = new File("trasformazione.xsl");
//"Moon Buggy/lunar_vehicle_tris.dae"
File datafile = chooser.getSelectedFile();
DocumentBuilder builder = factory.newDocumentBuilder();
//Handling validation errors
builder.setErrorHandler(
new org.xml.sax.ErrorHandler(){
// ignore fatal errors (an exception is garaunteed)
public void fatalError(SAXParseException exception)
throws SAXException{}
//treat validation errors as fatal
public void error(SAXParseException e)
throws SAXParseException
throw e;
// dump warnigs too
public void warning(SAXParseException err)
throws SAXParseException
System.out.println("** Warning"
+ ", line " + err.getLineNumber()
+ ", uri " + err.getSystemId());
System.out.println(" " + err.getMessage());
document = builder.parse(datafile);
// Use a Transformer for output
TransformerFactory tFactory = TransformerFactory.newInstance();
StreamSource stylesource = new StreamSource(stylesheet);
Transformer transformer = tFactory.newTransformer(stylesource);
DOMSource source = new DOMSource(document);
// SaveDialogue JFileChooser
ExampleFileFilter htmlFilter = new ExampleFileFilter();
htmlFilter.addExtension("html");
htmlFilter.setDescription("documento html");
chooser.setFileFilter(htmlFilter);
chooser.showSaveDialog(null);
//"Moon Buggy/lunar_vehicle_tris.html"
File htmlFile= chooser.getSelectedFile();
StreamResult result = new StreamResult(htmlFile);
transformer.transform(source, result);
} catch (TransformerConfigurationException tce) {
// Error generated by the parser
System.out.println("\n** Transformer Factory error");
System.out.println(" " + tce.getMessage());
// Use the contained exception, if any
Throwable x = tce;
if (tce.getException() != null) {
x = tce.getException();
x.printStackTrace();
} catch (TransformerException te) {
// Error generated by the parser
System.out.println("\n** Transformation error");
System.out.println(" " + te.getMessage());
// Use the contained exception, if any
Throwable x = te;
if (te.getException() != null) {
x = te.getException();
x.printStackTrace();
} catch (SAXException sxe) {
// Error generated by this application
// (or a parser-initialization error)
Exception x = sxe;
if (sxe.getException() != null) {
x = sxe.getException();
x.printStackTrace();
} catch (ParserConfigurationException pce) {
// Parser with specified options can't be built
pce.printStackTrace();
} catch (IOException ioe) {
// I/O error
ioe.printStackTrace();
} // main
} -
Validation Error after updating a SelectOneMenu via Ajax (DWR)
I have a <t:selectOneMenu> that is bound to a backing bean together with a <f:selectItems> that is bound to a SelectItems[] attribute in the same backing bean. See below:
<t:selectOneMenu forceId="true"
id="department"
value="#{DeptBean.departmentId}">
<f:selectItems value="#{DeptBean.departmentList}" />
</t:selectOneMenu>
When the user changes another field on my page, I use DWR to retrieve a new list of departments and update the <t:selectOneMenu> accordingly. That works just fine.
The problem is that if I select a value from the updated department list and then submit the page I get a "Validation Error".
I suspect that the JSF Component Tree still has the old list of values and does some validation which obviously fails.
Has anyone dealt with this before? Any ideas would be appreciated!<t:selectOneMenu forceId="true"
id="department"
value="#{DeptBean.departmentId}">
<f:selectItems value="#{DeptBean.departmentList}"
/>
</t:selectOneMenu>What is the type of departmentId ? If it is not a String, then try making it a String and see if the issue is resolved. I am not sure if this will help you. But its worth a try. -
Read-only radio group losing value on validation error
It took quite a while to track this down, but I think I've got it narrowed down properly. I have an APEX form for updating a record in a databse table with a radio group which is conditionally read-only. If that radio group has a value AND is read-only, when the form is submitted and hits a validation error, the value of the radio group is lost.
For example, the radio group SUBMITTED_FOR_APPROVAL is set to Y and is read-only for a given user. That user then changes something else on the form and submits it. However, the form now hits a validation error for some field. When the form reloads with the validation error displayed, all the fields are restored except the read-only radio group which is now blank. If a select list is used with the identical read-only condition, it works fine. Likewise, if a radio group is used, but the read-only condition is removed, it works fine. It is only when it is a radio group and it is read-only, that the value does not appear to be submitted to the session with all the form values whent he form is submitted.
Is this a bug or am I simply missing something?
Apex 3.1.2
Rgds/Mark M.It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M. -
Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment
I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
Abort Retry Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC ALASKA
A M I
FACP ALASKA
A M I
HPET ALASKA
A M I
MCFG ALASKA
OEMMCFG.
SSDT AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned. 0
unindexed files recovered. CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
43468 KB in 21139 indexes.
0 KB in bad sectors.
253139 KB in use by the system.
65536 KB occupied by the log file.
1905048300 KB available on disk.
4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts. -
Validation error while trying to change a value in a request scope bean
- JBoss 4.2.3.GA
- JSF 1.2_09-b01-BETA1 (Mojarra)
- Java 5 Update 17
Hello, everybody!
I'm having the following problem in my JSF web application:
I have a request scope backing bean. The first time this bean is loaded (I check
this with the ResponseStateManager.isPostBack() method) I fill a list of SelectItem
instances that are to be displayed in the JSF page in a +<h:selectOneMenu>+ component.
The list goes, of course, to the +<h:selectOneMenu>+'s +<f:selectItems>+ facet child
component. In the constructor I also define the value that goes to the value property
of the +<h:selectOneMenu>+ component. This value is a property in the backing bean, as
is the list of SelectItem instances. Until now we have something like this:
The backing bean declaration in faces-config.xml:
<managed-bean>
<managed-bean-name>solicitacaoGeral</managed-bean-name>
<managed-bean-class>br.urca.solicitacoes.web.PaginaSolicitacaoGeral</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
The relevant parts of the JSF page:
<h:form id="form">
<h:selectOneMenu value="#{solicitacaoGeral.setorOrigem}" id="foco">
<f:selectItems value="#{solicitacaoGeral.setoresOrigem}" />
</h:selectOneMenu>
</h:form>
The relevant parts of the backing bean class:
public class PaginaSolicitacaoGeral
private final List<SelectItem> fSetoresOrigem = new ArrayList<SelectItem>();
private Setor fSetorOrigem;
public PaginaSolicitacaoGeral()
if (primeiraExibicao()) // First load (!ResponseStateManager.isPostBack())
// Fill fSetoresOrigem...
fSetorOrigem = ...
else // Page submitted
// Read below...
public List<SelectItem> getSetoresOrigem()
return fSetoresOrigem;
public Setor getSetorOrigem()
return fSetorOrigem;
public void setSetorOrigem(Setor setorOrigem)
fSetorOrigem = setorOrigem;
private boolean primeiraExibicao()
String idFerramentaExibicao =
FacesContext.getCurrentInstance().getViewRoot().getRenderKitId();
ResponseStateManager gerenciadorEstadoResposta =
RenderKitUtils.getResponseStateManager(
FacesContext.getCurrentInstance(), idFerramentaExibicao);
return !gerenciadorEstadoResposta.isPostback(
FacesContext.getCurrentInstance());
}But when the user submits the form and the bean constructor is called again
(this time the method ResponseStateManager.isPostBack() returns true ),
in the else block in the constructor above, I need to fill fSetoresOrigem with
other values and also the fSetorOrigem field because, of course, the fSetorOrigem
field has to be a valid value that exists in the new fSetoresOrigem list.
JSF is not complaining about the change to the list items, but it is complaining
to the change to the fSetorOrigem field (the list value), even though it is a
valid value present in the list. So I'm getting this error message:
08:23:54,312 INFO [lifecycle] WARNING: FacesMessage(s) have been enqueued, but may not have been displayed.
sourceId=form:foco[severity=(ERROR 2), summary=(form:foco: Validation Error: Value is not valid), detail=(form:foco: Validation Error: Value is not valid)]I suppose that JSF is comparing the new value of the field fSetorOrigem with the value
it has in the view state. As the value is different it is raising the error. That's
what I suppose. But am I not able the change the value in the postback? I've already
checked and the value is valid. It corresponds to a value that exists in the list.
I really need a solution to this problem as I'm stuck with this and can't proceed until
I find a solution to this. What I am doing wrong and how can I solve this?
Thank you very much.
MarcosBalusC wrote:
It is comparing the selected value against the List<SelectItem> returned by getSetoresOrigem() as it is during the apply request values phase of the form submit request.Ok. That's what I supposed JSF was doing.
BalusC wrote:
If the selected value isn't in there, then you will get this error.I can understand this, but is this right? As I said, the old value isn't really there because I changed the list values to new ones. But the new value (the value of fSetorOrigem ) corresponds to a value that exist in the new list items, so a valid value. So JSF is not considering that I also changed the list, not just the value. It is comparing the new value with the old list, not the new one. Acting like this JSF is making the page looks like a static HTML page, not a dynamic one. If I can't change the list and the value, what's the point of that? In my point of view I'm not doing anything wrong, I'm not violating any JSF rules.
Marcos -
AIP-51505: General Validation Error - SFTP transport - validation disabled
Configuration :
internal DC with SFTP
external DC with SFTP (via proxy)
Business Protocol Custom Document over Generic Exchange
MLR 12? (patch 8703404)
3 environments have the same tip.properties
2 environments pick up and send all files successfully.
I cannot see a difference between the deployments that is causing the validation error.
[also in all three B2B's are an ebXML and AS2 trading partner configuration]
The 3rd generates validation errors for all files (14) in the b2b.log and sends some (1-7).
Note that the sent ones change, if a failed one is retried in the source directory, sometimes it is sent successfully.
In the failing/validating deployment there is no validation for (cut and pasted from UI screens) :
Document Protocol Revision Details = Translation Enabled False Validation Enabled False
Document Types (Document Definition Details for each document def) = Is Translation Enabled False Is Validation Enabled False
tip.properties (environment where error occurs) :
#valid valudes for DiagnosticLevel:
#DEBUG, INFORMATION, WARNING, ERROR, FATAL.
#default logging level
oracle.tip.DiagnosticLevel = ERROR
#default component log level for B2B Engine
b2b.oracle.tip.DiagnosticLevel = ERROR
# following logging properties to be set back to false after resolving Sequence 98
# oracle.tip.adapter.b2b.logPayload = true
# oracle.tip.adapter.b2b.packaging.logDecryptMessage = true
b2b.oracle.tip.DiagnosticLevel.Repository = ERROR
b2b.oracle.tip.DiagnosticLevel.BusinessLogicLayer
b2b.oracle.tip.DiagnosticLevel.B2B
b2b.oracle.tip.DiagnosticLevel.ModelValidation
b2b.oracle.tip.DiagnosticLevel.ValidationRule
b2b.oracle.tip.DiagnosticLevel.TechStack
b2b.oracle.tip.DiagnosticLevel.Deployment
b2b.oracle.tip.DiagnosticLevel.Reports
b2b.oracle.tip.DiagnosticLevel.UI
#default component level logging for UI
ui.oracle.tip.DiagnosticLevel = ERROR
#specify component log leel to override default;
ui.oracle.tip.DiagnosticLevel.Repository = ERROR
ui.oracle.tip.DiagnosticLevel.BusinessLogicLayer
ui.oracle.tip.DiagnosticLevel.B2B
ui.oracle.tip.DiagnosticLevel.ModelValidation
ui.oracle.tip.DiagnosticLevel.ValidationRule
ui.oracle.tip.DiagnosticLevel.TechStack
ui.oracle.tip.DiagnosticLevel.Deployment
ui.oracle.tip.DiagnosticLevel.Reports
ui.oracle.tip.DiagnosticLevel.UI
oracle.tip.adapter.b2b.encoding=UTF-8
# Diagnostic Service defaults
oracle.core.ojdl.OrganizationId = oracle.com
oracle.core.ojdl.ComponentId = tip
oracle.core.ojdl.HostingClientId = beta
oracle.core.ojdl.BufferSize = 100000
oracle.core.ojdl.FlushInterval = 5000
# Specific diagnostic settings
oracle.tip.LogDirectory = /space/sw/oracle/products/ias/b2b/ip/log
oracle.tip.LogMaxSegmentSize = 10000000
oracle.tip.LogType = text
# option to save old log when rebounding the service
oracle.tip.LogSave = true
# B2B Info
oracle.tip.adapter.b2b.NumOfWFListeners = 1
oracle.tip.adapter.b2b.NumOfIPListeners = 1
oracle.tip.adapter.b2b.WFAgentName = OUTAGENT
oracle.tip.adapter.b2b.RMIPort = 5111
oracle.tip.adapter.b2b.RMIInstance = IP
#oracle.tip.adapter.b2b.WalletLocation = file:/etc/ORACLE/WALLETS/oracle/ora_wallet.txt
oracle.tip.adapter.b2b.ContinueValidationOnError = true
oracle.tip.adapter.b2b.MultipleIdentifications=false
oracle.tip.adapter.b2b.allTPInOneDirectory=true
oracle.tip.adapter.b2b.DocumentRouting=false
#oracle.tip.adapter.b2b.edi.identifyFromTP = Interchange | Group | Exchange
#oracle.tip.adapter.b2b.transportTrace = /space/sw/oracle/products/ias/b2b/ip/log/transport.trc
#oracle.tip.adapter.b2b.edi.ignoreValidation=InterchangeReceiverID,InterchangeSenderID,GroupReceiverID,GroupSenderID,GroupSenderQual,GroupReceiverQual,InterchangeSenderQual,InterchangeReceiverQual
#report Certificate validation as ERROR or WARNING; default value is ERROR
#oracle.tip.adapter.b2b.tpa.validateCertificate= ERROR | WARNING
#oracle.tip.adapter.b2b.document.NoValidation = inbound | outbound
# HTTP Proxy Host and Proxy Port
oracle.tip.adapter.b2b.ProxyHost =
oracle.tip.adapter.b2b.ProxyPort =
# MaxCachedSessions is set to 0 means no ExecutionContext
# is stored in HTTP session (IP cache is empty).Line below overwrites default
# value equals to 5 when 5 concurrent users could store context in their sessions
# By commenting that line you might turn IP cache on.
oracle.tip.ui.MaxCachedSessions = 0
# Suppression of Validation Warnings
oracle.tip.buslogic.validation.SuppressWarnings=false
# Callout directory
oracle.tip.callout.directory=%s_calloutDirectory%
# persistence directory
oracle.tip.runtime.persistence.dirName=%s_persistenceDir%
# enable ONS reverse ping
enableONS=true
# Optional property which user can set to specify saved report encoding e.g. UTF-8, UTF-16LE etc
# By default this property is not set, in this case the saved report csv file
# will be generated by using the native encoding
# Users can set this parameter to change the encoding of the generated saved report csv file
#savedReportEncoding=UTF-8
# Please don't modify the following properties
# Connection Info
username=%s_intgDBUser%
password=%s_intgDBPasswd%
#connect=jdbc:oracle:thin:@%s_intgDBHost%:%s_intgDBPort%:%s_intgDBSid%
drivertype = thin
tnsentry = inst1
host = %s_intgDBHost%
port = %s_intgDBPort%
sid = %s_intgDBSid%
oracle.tip.connection.useRepositoryAPI=on
oracle.tip.connection.oraclehome=/space/sw/oracle/products/ias/b2b
# property specific to Deployment
oracle.tip.deploy.workflow_username=%s_wfUsername%
oracle.tip.deploy.workflow_passwd=%s_wfPasswd%
oracle.tip.deploy.workflow_tnsname=%s_wfTnsname%
# UI user authorization
authorization = true
# encryption key used for securing secrets in the schema.
oracle.tip.security.key=Be8ejb7yOX3rSefEr5pxBl49WLc0Iej9VeI8jykdjRfv
##oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet
#oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/101202/ib/Apache/Apache/conf/ssl.wlt/default/b2bwallet
oracle.tip.adapter.b2b.WalletLocation =file:/sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet/ewallet.txt
# performance best practices
oracle.tip.adapter.b2b.sleepTimeout=1
oracle.tip.repos.RowSize=100
oracle.tip.adapter.b2b.receiveTimeout=1
oracle.tip.adapter.b2b.TPACache=true
The b2b.log from the failing environment has some lines not seen in the other two environments (the lines referring to MimePackaging:unpack) :
2010.04.29 at 19:07:14:295: Thread-11: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_ENVSTATUSES.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt
timestamp:Thu Jan 15 09:29:53 PST 1970
2010.04.29 at 19:07:14:295: Thread-11: BusinessLogicLayer - (DEBUG) New ExecutionContext has been created
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) Recieve a new PersistencyService
2010.04.29 at 19:07:14:299: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Design
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) A new PersistencyService is created
2010.04.29 at 19:07:14:340: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2010.04.29 at 19:07:14:342: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:343: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createDataStorage
2010.04.29 at 19:07:14:345: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createDataStorage
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2010.04.29 at 19:07:14:359: Thread-11: B2B - (DEBUG) DBContext commit: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Push Stack: queryWireMessage
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Leave
2010.04.29 at 19:07:14:365: Thread-10: BusinessLogicLayer - (DEBUG) Pop Stack: queryWireMessage
2010.04.29 at 19:07:14:365: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2010.04.29 at 19:07:14:366: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2010.04.29 at 19:07:14:367: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2010.04.29 at 19:07:14:367: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2010.04.29 at 19:07:14:369: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Exit
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange SOAPAction is [null]
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@391da0
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_ENVSTATUSES.txt
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - ENVSTATUSES
2010.04.29 at 19:07:14:373: Thread-10: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:408)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1477)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2576)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2446)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2401)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=SA_ENVSTATUSES.txt, filesize=1, file_ext=.txt, filename_format=%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt, fullpath=/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt, timestamp=Thu Jan 15 09:29:53 PST 1970}
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error informationThank you for the suggestion, unfortunately, I cannot get it to work.
I've updated the IDC transport server to 3 different filename_formats, and tried the corresponding files, with correct names to match the filename_format.
After updating the IDC I validated the trading partner (host).
I then updated the agreement using the updated IDC, and validated the agreement.
I then validated the host again.
Then I created a new deployment.
And still received the error.
I then deleted the old IDC and created a new IDC and new agreement and new deployment, trying 3 different "Internal delivery channel filename format" values (updating and validating the agreement and host trading partner each time).
And still received the error.
No matter what I set EITHER the IDC "filename format" OR "Internal delivery channel filename format", the b2b.log always reports :
filename_format = %TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
e.g.
2010.05.16 at 18:05:02:758: Thread-15: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_DRUGS_10.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_DRUGS_10.txt
timestamp:Thu Jan 15 09:54:18 PST 1970
When I try a file with a revision number, e.g. SA_DRUGS_10.txt the log shows :
2010.05.16 at 18:05:03:602: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TIMESTAMP - 10
2010.05.16 at 18:05:03:895: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
which makes sense as "10" is not a timestamp.
If I exclude the revision, using SA_DRUGS.txt the log shows :
2010.05.16 at 18:27:03:543: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_DRUGS.txt
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:27:03:545: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
So, the timestamp gets ignored (as there is no "_" delimiter), but it still fails, probably because there is no timestamp in the filename.
So, why won't the UI correctly set the IDC filename_format or Internal filename_format ? -
Validation error for tag cfloop
Hi All,
Complete newbie to CF here. I've inherited (or bought) an online business which has its site written in CF. I haven't done this sort of stuff before but do work SQL for a living and object oriented stuff plus have done a bit of html and php so CF isn't mind blowing to me (in its simple form).
I've downloaded my site on to my computer to run a local copy that I can hack to pieces if needs be. For some reason, I have a few problems with the site running locally. The first error I'm getting is a Attribute validation error for tag cfloop.
Basically, index.cfm has this bit of code in it:
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
<cfinvokeargument name="storedProcedure" value="usp_GetFeaturedWineries">
</cfinvoke>
Ok, easy enough. Anyway, there's a call down the page to:
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
Within displayFeaturedWineries.cfm is the code that calls the stored proc invoked above:
<cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Bam, that's where the error occurs. "The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid.
What??? The stored proc exists and it only returns two records (which begs me to wonder why you would have startrow and endrow but anyway, it doesn't work with or without it).
The other interesting thing is that this works on production, NO PROBLEM!!! WTF? How can it work on production but not locally.
The only thing I'm starting to think is:
a) I've missed a setting somewhere in CF or
b) I'm running Apache as compared to IIS or
c) I'm running SQL 2008 and CF 9 which will no doubt be different to the production host server.
Should B or C be causing THAT type of problem??
Thanks,
MattI'm not sure what code apart from the above is going to show you what you could possibly need to solve this, but here goes. The following is only snippets of the code, but they are the relavant snippets. Other stored procs work. The cfdump for getFeaturedWineries_qry shows 'usp_getFeaturedWineries'. I know its there because I've been unable to run "EXEC usp_getFeaturedWineries" after copying it straight out of the code. As previously stated, there are other stored procs which are running fine.
datasets.cfc
<cffunction name="storedProcedure">
<cfargument name="storedProcedure" required="Yes" type="string">
<cfstoredproc procedure = "#ARGUMENTS.storedProcedure#"
datasource = "#REQUEST.DSN_NAME#"
username = "#REQUEST.DSN_USER#"
password = "#REQUEST.DSN_PASS#"
returncode = "Yes">
<cfprocresult name="storedProcedure" resultset="1">
</cfstoredproc>
<cfreturn storedProcedure>
</cffunction>
application.cfm
<!--- DATA SOURCE VARIABLES --->
<cfset DSN_NAME = "boutiqueWineriesTest">
<cfset DSN_USER = "coldfusion">
<cfset DSN_PASS = "coldfusion">
index.cfm
<cfobject component="#COMP_REF#.datasets" name="datasets">
<cfinvoke component="#datasets#" method="storedProcedure" returnvariable="getFeaturedWineries_qry">
<cfinvokeargument name="storedProcedure" value="usp_getFeaturedWineries">
</cfinvoke>
<cfinclude template = "#REQUEST.CFMPath#includes/displayFeaturedWineries.cfm">
displayFeaturedWineries.cfm
<cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
Attribute validation error for tag cfloop.
The value of the attribute query, which is currently getFeaturedWineries_qry, is invalid. The error occurred in C:\apps\iishome\includes\displayFeaturedWineries.cfm: line 33
Called from C:\apps\iishome\index.cfm: line 399
Called from C:\apps\iishome\index.cfm: line 79
Called from C:\apps\iishome\index.cfm: line 1
31 : <tr>
32 : <td width="626" colspan="3" class="productCenter_bg2">
33 : <cfloop query="getFeaturedWineries_qry" startrow="1" endrow="2">
34 : <div class="productCennews">
35 : <table border="0" cellspacing="0" cellpadding="0"> -
Validation error message in JSF 1.2
I am testing my Web application inside Tomcat 6.0.2 and using JSF 1.2. I was surprised to see that validation error messages do not only display the custom error message, but also the id tag and a "Validation Error: " text. For instance, if an input text component has the required property set to true and the user does not fill in value, the following error message will be displayed on page submiision: "hello:test: Validation Error: Value is required." instead of just "Value is required.". I am wondering if there is a way to silence the id tag and the "Validation Error: " text. hello:test id tag reflects the fact that the form has an id of "hello" and the input text component an id equal to "test".
Hello
I'm quite new to this technology. Would like to know how can we replace the 'annoying component id' with label while generationg validation/conversion error message.
E.g:
'for:compID' some error message
must be formated as
'compLabel' some error message
I happened to know that this feature is supported in JSF 1.2 impl. But didn't work for me with Sun RI.Can any body give me some sample code snippet for the same
Thanks
Jobinesh -
Validation error in Tag Library at deploy time
I am trying to deploy a JSF2 app to NW CE 7.1 EHP1. This application deploy's fine to Tomcat. When I deploy to SAP it gives an error: Error in parsing [META-INF/primefaces-i.tld] TLD file in the following [D:\usr\sap\NCX\J00\j2ee\cluster\apps\com.sap\IDMear\servlet_jsp\IDM\root\WEB-INF\lib\primefaces-1.0.0.jar] JAR file.
[EXCEPTION]
com.sap.engine.lib.xml.parser.NestedSAXParseException: Fatal Error: org.xml.sax.SAXParseException: Validation error : line: 13; col: 16; :description : Element is not allowed.(:main:, row=13, col=17) -> org.xml.sax.SAXParseException: Validation error : line: 13; col: 16; :description : Element is not allowed.
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:140)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:174)
at com.sap.engine.lib.processor.SchemaProcessor.parse(SchemaProcessor.java:197)
at com.sap.engine.services.servlets_jsp.server.deploy.descriptor.TagLibDescriptor.loadDescriptorFromStream(TagLibDescriptor.java:90)
From looking at the TLD XSD for JEE 5, the Description field should be allowed. Do you know why it is not comparing the TLD against the correct schema or if there is another explanation?
This is a 3rd party faces component library. Here is where it fails:
<?xml version="1.0" encoding="UTF-8"?>
<taglib xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-jsptaglibrary_2_1.xsd" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="2.1">
<tlib-version>1.2</tlib-version>
<short-name>i</short-name>
<uri>http://primefaces.prime.com.tr/touch</uri>
<tag>
<name>application</name>
<tag-class>org.primefaces.touch.component.application.ApplicationTag</tag-class>
<body-content>JSP</body-content>
<attribute>
<name>id</name>
<required>false</required>
<description><![CDATA[Id of the component]]></description> <rtexprvalue>false</rtexprvalue>
</attribute>
Any suggestions would be appreciated.It looks like the 3rd party tld did not have the description in the correct order. It has been corrected in a new build.
-
Getting mandatory attribute validation error when the value is defaulted through customization
Hi
I am getting Mandatory attribute validation error when we default the value through customization.
In the UI we have attribute called Last Name which is mandatory at EO level. Customer wanted to default Last name to some value, through page composer it is defaulted to some text and saved.
When ever we open the page the the same value is defaulted as Last Name and appearing in the UI. But when we submit the page, EO level validation is failing. hence we are getting last name is missing.
When i debug the code last name attribute value for EO is blank.
In the UI the attribute last name is associated with bindings --> #{bindings.lastname.inputvalue}
The validation is failing if we remove the default binding associated with inputtext box.
Can some body help what can be reason and is there any solution?
Thanks,
Praveenversion 12.1.2
I am struggling with same situation, I can't set the default value at business component because, the default value comes from a REST service at run time. In page A, I have a field F1 that contains value from REST service. Page B has a database bound field F2, whose default value should come from F1 in Page A when a user navigates from Page A to Page B. If I set the value of F2 to be the value of F1, then it displays the value in the UI, but nothing gets submitted to EO and fails at commit.
To make things difficult, here is my situation: Page A lives in bounded taskflow TF1, and Page B lives in bounded taskflow TF2. So I have created an input parameter P1 in TF 2, which carries over the value of F1 in Page A to Page B. When I am in Page B, I can successfully see the value of the taskflow input parameter P1. So, how do I programmatically set the value of field F2 with the value of input parameter P1?
I tried setting the F2.inputValue in a method call M1 in taskflow TF2 prior to Page B, but I get null pointer exception as it can't see field F2 yet.
It seems like a simple thing to do, but I have spent a lot of time trying to make it work without any success.
I would greatly appreciate any guidance. -
JSF, NetBeans and customizing of Standard Validation Errors
Hello together,
i want to use german Standard Validation Errors via a own .properties File:
1.
Here is my faces-config.xml ( the entries are uncommented ! ):
<faces-config>
<application>
<locale-config>
<default-locale>de</default-locale>
<supported-locale>de</supported-locale>
<supported-locale>en</supported-locale>
</locale-config>
*<message-bundle>alles.mymessages</message-bundle>*
</application>
</faces-config>
2.
Here is mymessages.properties-File in package alles:
javax.faces.validator.NOT_IN_RANGE=Das angegebene Attribut liegt nicht zwischen den erwarteten Werten {0} und {1}.
javax.faces.validator.NOT_IN_RANGE_detail="{2}"\:Eingegebener Wert liegt nicht im erwarteten Bereich von {0} bis {1}.
javax.faces.validator.LongRangeValidator.LIMIT=Validierungsfehler
javax.faces.validator.LongRangeValidator.LIMIT_detail=Eingegebener Wert kann nicht in den korrekten Typ umgewandelt werden.
javax.faces.validator.LongRangeValidator.MAXIMUM=Validierungsfehler
javax.faces.validator.LongRangeValidator.MAXIMUM_detail="{1}"\:Wert ist gr\u00F6\u00DFer als das erlaubte Maximum"{0}".
3.
Here the part of the JSF-View with the Validator:
<ui:textField binding="#{WorkTypeEdit.textFieldBeschartKzSoll}" converter="#{WorkTypeEdit.bigIntegerConverter1}"
id="textFieldBeschartKzSoll" required="true" style="height: 24px; width: 48px" validator="#{WorkTypeEdit.longRangeValidator1.validate}"/>
The application still shows the standard englisch validation error text. What is wrong here ?
I' am using NetBeans 5.5.1 with VWP and the deploment is to Glassfish server.
Thanks a lot.
HJAHello Raymond,
i did some coding and create additional a custom validator:
My JSF-View part:
<ui:textField binding="#{WorkTypeEdit.textFieldBeschartKzSoll}" converter="#{WorkTypeEdit.integerConverter1}"
id="textFieldBeschartKzSoll" maxLength="2" required="true" style="height: 24px; width: 48px" *validator="#{MyValidation.validateInput}">*
*<f:validateLongRange minimum="1" maximum="9"></f:validateLongRange>*
</ui:textField>
My custom validator in Myvalidation class:
public void validateInput (FacesContext facescontext, UIComponent component, Object value) throws ValidatorException
long min = 0, max = 0;
Locale locale = facescontext.getViewRoot ().getLocale ();
String mb = facescontext.getApplication ().getMessageBundle ();
ResourceBundle rb = ResourceBundle.getBundle (mb, locale);
Validator[] validator = ((UIInput) component).getValidators ();
for (int i=0; i < validator.length; i++)
if (validator[i] instanceof LongRangeValidator)
LongRangeValidator lv = (LongRangeValidator) validator;
long lvalue = Long.valueOf ((String)value.toString ());
min = lv.getMinimum ();
max = lv.getMaximum ();
if (lvalue < min || lvalue > max)
((UIInput) component).setValid (false);
*String message = rb.getString ("javax.faces.validator.NOT_IN_RANGE");*
*String messageDetail = rb.getString ("javax.faces.validator.NOT_IN_RANGE_detail");*
*facescontext.addMessage (component.getClientId (facescontext), new FacesMessage (FacesMessage.SEVERITY_ERROR,message,messageDetail));* }
What happen now is, at first i get the german message because of rb.getString........ so the locale is working
and then the englisch message follows in the message component.
Sorry that i take your time so long...
HJA
Maybe you are looking for
-
Dynamic run-time objects in a query
Hi everybody, I came across some docs that say this Dynamic SQL fails: CREATE PROCEDURE drop_table (table_name IN VARCHAR2) AS BEGIN EXECUTE IMMEDIATE DROP TABLE :tab USING table_name; END; Can someone explain why can't an object name be provided t
-
Greetings, I have recently configured a Leopard 10.5.1 Mail Server, which is a new platform for me. I have finally gotten all mail services to work and am finishing up the installation. I have a client that uses a crackberry who wants his email both
-
Hi, Any difference between DBMS_RESULT_CACHE set to Bypass or Disabled? Thanks
-
Docs for install BPEL PM with 9i/10g RDBMS
Hi all, Where can I find documents for install BPEL PM 10.1.2.0 Beta with 10g database? Thanks
-
hi! I'm using a socket connection in my j2me application and i need to know the sequence number of every tcp packet that i receive, can i do that? I was searching and i didn't find anything... thanks!