Validation errors out for Rapid Entry Paysheets in HCM 9.2
I am experiencing trouble entering the data into "Create Rapid Entry Paysheets". Any prior validation errors are showing up like "Invalid Employee ID" or "Invalid Employee Record". But when it comes to no errors in the entered data, as per the SQL in App Engine PYRE_VALID- Section 90FINAL - Step50 it should be inserting the data into PS_PYRE_INVALID stating that all the records passed, but it errors out with 'duplicate row', even though there is no duplicate in the table.
Has anyone encountered this issue or any ways to fix the issue ??
Cross-posted in many forums. Don't answer this one.
Similar Messages
-
OBA5 : Error Message for duplicate entry
Hi
In Tcode OBA5 - i enter F5 as Apllication area and i select new entries - i Enter 117 - and i Enter E before i save.
but when i go to MIRO to check if there is an error message for duplicate entry, i find just a Warning Message !
Please did i forget any thing ? please advise.
Thank You,Hello,
OBA5 should be enough, but you must remenber that the following fields must be identical for duplicate invoice check:
Company code (BUKRS)
Vendor number (LIFNR)
Currency (WAERS)
Reference number (XBLNR)
Amount in document currency (WRBTR)
Document date (BLDAT)
Note 305201 is also helpful.
Cheers -
Output determination (print out) for service entry sheet
All SAP Gurus,
What are the steps involved in determining the output (print out) for service entry sheet?
Regards,Hai,
Goto NACE select the Application ES, out type NEU and maintain the program SAPFM11, Formroutine ENTRY_NEW, form ML_SERVICE_ENTRY aganist medium printout and maintain the condition records for printout to VN.
take print in ML83
Regards,
eswaramanu...
Edited by: eswar manu on Oct 21, 2008 8:37 AM -
User exist to create custom error messge for service entry sheet
Hi,
Can any body tell me any user exist to create custom error messge for service entry sheet?
Thanks,Hi
Can you please elaborate on the business scenario??
You may look at EXIT_SAPLMLSR_020 or EXIT_SAPLMLSR_021 for this purpose.
Regards
Prasad -
Validation error appearing for the wrong field
Hi friends
i am facing aissue with my application
I have 3 Field
1. Department (Field 1)
2. Emp id(Field 2)
3. Name(Field 3)
If i am not giving Field 1 value and trying to save i am getting proper error message.
If I am giving Field 1 value and not giving Field 2 value , then I am getting error message for Field 2 in Field 1 .
If am giving Field 1 and Field 2 value and not giving Field 3 value , I am getting the error for Field 3 in Field 1.
validation in Entity level.
i am using jdev11.1.1.6.0, adf faces and adf bc.
Edited by: 964331 on Oct 22, 2012 3:21 AMHi,
See followings
https://blogs.oracle.com/workingwithadf/entry/adf-bc_business_rulesvalidation_eovo
http://one-size-doesnt-fit-all.blogspot.com/2007/08/jdev-11g-new-features-adf-bc-entity_06.html -
Validation error when using env-entry in web.xml
I've added an env-entry element to my web.xml and it falls over at deploy time with a validation error. However, from what I can see, this is valid based on the schema.
And infact, it matches the example in the weblogic doco - http://edocs.bea.com/wls/docs103/webapp/web_xml.html#wp1025195
The error I'm getting is:
<17/12/2008 11:45:56 AM EST> <Error> <J2EE> <BEA-160197> <Unable to load descriptor D:\workspace\source_checkout\investment_control\ic-web\src\main\webapp/WEB-INF/web.xml of module ic-web.war. The error is weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
problem: cvc-complex-type.2.4a: Expected elements 'mapped-name@http://java.sun.com/xml/ns/javaee injection-target@http://java.sun.com/xml/ns/javaee' instead of 'env-entry-type@http://java.sun.com/xml/ns/javaee' here in element env-entry@http://java.sun.com/xml/ns/javaee:<null>
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
My web.xml looks like:
<web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
version="2.5">
<description>IC Web</description>
<env-entry>
<env-entry-name>aEntry</env-entry-name>
<env-entry-value>aValue</env-entry-value>
<env-entry-type>java.lang.String</env-entry-type>
</env-entry>
</web-app>
Any suggestions???Found a resolution to this in the end.
Unless you have the sub-elements in the order below, it will get validation errors.
<env-entry>
<env-entry-name>maxAmount</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>aString</env-entry-value>
</env-entry>
A bit weird and very frustrating.... -
Import Endeca View Graph Error Out ( for SSL enable Endeca Server)
Hi All
I have almost 6+ views in my data domain , and I am trying to Import the View definition ( as we need to Reset the data domain) , But my Import view graphs Error out with below Error
ERROR [WatchDog_0] - Component [Prepare View Stream:PREPARE_VIEW_STREAM] finished with status ERROR.
Message: Transform failed!
Interpreter runtime exception in function substring on line 7 column 19
String index out of range: -1
ERROR [WatchDog_0] - Error details:
org.jetel.exception.JetelRuntimeException: Component [Prepare View Stream:PREPARE_VIEW_STREAM] finished with status ERROR
Any help to resolve this error will be great
thanks
SrHi Patrick
Thanks for update . You are right , this issue is related to Index of arry rather than SSL . Now I have another issue and in case you have any solution do share .
As workaround , I just replace
validatedSemanticEntity with semanticEntity
and listEntitiesResponse with putEntities ,in the file generated by my Export view Graph .
I have created another New graph with 2 compoenets
1.Read File - that will read my modified file
2. Web Service Client - input to this Web Service Client is Read file compoment (#1) and in this Web Service Client I am calling {http://www.endeca.com/endeca-server/sconfig/3}SConfig#SConfigPort#putEntities.
On execution graph is not throwing any Error , but I still not able to see my views. Expectation are , one execution this graph will created custom views .
Do I need to Reboot the Endeca Server ?.
whole idea is to Import view definition and Export those into another domain .
Regards
Sr -
Validating in Parameters for user entry
HI All,
Pls write a simple code for me.
0=0
1=1
2=2
3=3
4=4
5=5
6=6
7=7
8=8
9=9
A=10
B=12
C=13
D=14
E=15
F=16
G=17
H=18
I=19
J=20
K=21
L=23
M=24
N=25
O=26
P=27
Q=28
R=29
S=30
T=31
U=32
V=34
W=35
X=36
Y=37
Z=38
Use modulus 11 and remindr is check digit
Example
EIMU466000
15*1+
19*2+
24*4+
32*8+
4*16+
6*32+
6*64+
0*128+
0*256+
0*512
=1045/11=95 and reminder is 0 check digit is 0
When 11th digit enter by customer .It has to veryfy the above logic & check the riminder.
For incorrect entry Pass the error message.
Thanks in advance,
SinghaHI,
Please try following logic
var1 = 'EIMU466000'.
var = strlen(var1).
do var times.
var2 = var1+var(1).
case var2.
when '0'
sum = sum + 0 * var.
when '1'
sum = sum + 1 * var
when.....(use all digits)
endcase.
enddo.
sum1 = sum /11.
if sum1 > 0.
message .....
endif.
Regards,
Amole -
Validation Error Messages of Manual Entries in F4 enabled Fields
I have a view on which someone has set up F4 help.I see where the GET_V method has been created to establish the pulldown values
CALL METHOD /almgt/cl_common_util=>get_f4_help
EXPORTING
iv_type = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
iv_index = iv_index
iv_keyfield_name = 'PL_SP_HANDLING' "context attr for Job Position
iv_textfield_name = 'PL_SP_HANDLINGT'
iv_help_id = '/ALMGT/C_SPCTY-PL_SP_HANDLING' "name of check table and key field name
iv_only_active_records = abap_true
RECEIVING
rv_valuehelp_descriptor = rv_valuehelp_descriptor
If a user does not use the pulldown, and types in an unallowed value, a message is delivered that says
& code & is either invalid or inactive (the ampersands are filled in).
We want to change these messages but I can not find where they are being thrown from. Where do these validations generally take place ? DO_VALIDATE_INPUT is empty.
Thanks... ...Mike
CRM 7.0
FRM (Fundraising Management)
(Comp: /ALMGT/BT115H_SLSO , View /ALMGT/BT115H_SLSO/Details,
Context BTSALESSET, Attribute: STRUCT.PL_SP_HANDLING)I had originally trapped CL_BSP_WD_MESSAGE_SERVICE ADD_MESSAGE() and was getting no hits. It turns out that the caller was using fm CRM_MESSAGE_COLLECT. When I trapped that, I was able to find the BADI that was throwing the message ( CRM_SALES_BADI ).
-
Errors: Length for text entry field must be between 1 and 32
Hi Guys,
I have has the following error messgage when defining and using a text variable in a series of columns in a characteristic structure. In addition the text display does not work for 1 specific calculated key figure, It just displays the name of the text variable. Where ever this type of calculation is used I get the text variable tecnical name displayed!
i.e &0T_FPER& -2 % on LY where calc =
'&0T_FPER& -2 Actual'/'&0T_FPER& -2 Last Year' -1) * 100
There is a calc KF as above for -1 % on LY, and LY
Why do i get the above error message and how can I get the text variable to display for the this Calc Key Figure?
Thanks
DVHi Depesh,
I had the same issue and I solved it by moving the rest of the text beside the Text Variable to the next line. I.e.,
&0T_FPER&
-2 %
To do this just go to the end of the text variable and click enter.
Hope this helps.
Kumar -
Error message for double entry of a phone type.
Hi. From "Phone Number" form i am trying to add for second time the phone type "Home" and i get an Error Message "APP-PAY-51530: Only one active phone number is allowed. Action: Delete existing home phone, or use secondary home phone type."
This message is correct. I want to add the same message also for phone type "Mobile" because now the application allows to add it more than one time.
Does anybody knows how can i add a new error massage?Hi Rachel,
You can make use of the exit (Include) MV45AFZZ. The corresponding form routine is FORM USEREXIT_SAVE_DOCUMENT_PREPARE.
In this exit, For the given billing document ( which is going to be cancelled ), pick up the accouting document from BSEG tables.
For this accouting document, Pass this to BSAD Table ( Customer clleared items)
If BSEG-BELNR = BSAD-BELNR and
BSEG-Acc.Year = BSAD-Acc,year )..
Then throw a error message and EXIT.
So for all the cleared docments , user can not cancel the invoices.
Regards,
Sai -
RMAN script errors out for some DB's
I have a single RMAN script that uses env variables to execute RMAN for two databases. It runs fine. I cloned the two DB's (changed DBID's), all four are on the same host. Now I try to use same script for all four. I receive an error when trying to run against the cloned databases. Here is script:
spool log to full.log append;
connect catalog rman/xxxxxx@iasrman
connect target /
run {
sql 'ALTER SYSTEM SWITCH LOGFILE';
backup incremental level 0 database diskratio=0 plus archivelog delete input;
And here is error, it stops same place everytime, input appreciated.
Recovery Manager: Release 9.2.0.5.0 - 64bit Production
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: PRSMQ02 (DBID=944525168)
RMAN> 2> 3> 4>
sql statement: ALTER SYSTEM SWITCH LOGFILE
Starting backup at 30-MAY-07
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=20 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=19 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=18 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=17 devtype=DISK
allocated channel: ORA_DISK_5
channel ORA_DISK_5: sid=11 devtype=DISK
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=25 recid=25 stamp=623931644
channel ORA_DISK_1: starting piece 1 at 30-MAY-07
channel ORA_DISK_2: starting archive log backupset
channel ORA_DISK_2: specifying archive log(s) in backup set
input archive log thread=1 sequence=26 recid=26 stamp=623931644
channel ORA_DISK_2: starting piece 1 at 30-MAY-07
channel ORA_DISK_1: finished piece 1 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931649_s59_s1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
channel ORA_DISK_1: deleting archive log(s)
archive log filename=/q02/archive/prism/log_prsmq02_25.arc recid=25 stamp=623931644
channel ORA_DISK_2: finished piece 1 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931649_s60_s1 comment=NONE
channel ORA_DISK_2: backup set complete, elapsed time: 00:00:02
channel ORA_DISK_2: deleting archive log(s)
archive log filename=/q02/archive/prism/log_prsmq02_26.arc recid=26 stamp=623931644
Finished backup at 30-MAY-07
Starting backup at 30-MAY-07
using channel ORA_DISK_1
using channel ORA_DISK_2
using channel ORA_DISK_3
using channel ORA_DISK_4
using channel ORA_DISK_5
channel ORA_DISK_1: starting incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00009 name=/q02/oradata01/prsmdata/Data_13.dbf
input datafile fno=00016 name=/q02/oradata01/prsmdata/Data_20.dbf
input datafile fno=00025 name=/q02/oradata01/prsmdata/Data_04.dbf
input datafile fno=00005 name=/q02/oraindx01/prsmdata/Index_11.dbf
input datafile fno=00020 name=/q02/oradata01/prsmdata/Tools02.dbf
input datafile fno=00022 name=/q02/oraindx01/prsmdata/index_12.dbf
channel ORA_DISK_1: starting piece 1 at 30-MAY-07
channel ORA_DISK_2: starting incremental level 0 datafile backupset
channel ORA_DISK_2: specifying datafile(s) in backupset
input datafile fno=00010 name=/q02/oradata01/prsmdata/Data_14.dbf
input datafile fno=00015 name=/q02/oradata01/prsmdata/Data_19.dbf
input datafile fno=00024 name=/q02/oradata01/prsmdata/Data_03.dbf
input datafile fno=00003 name=/q02/oratmp01/prsmdata/rbs01.dbf
input datafile fno=00001 name=/q02/orasys01/prsmdata/system01.dbf
input datafile fno=00012 name=/q02/orasys01/prsmdata/system02.dbf
channel ORA_DISK_2: starting piece 1 at 30-MAY-07
channel ORA_DISK_3: starting incremental level 0 datafile backupset
channel ORA_DISK_3: specifying datafile(s) in backupset
input datafile fno=00008 name=/q02/oradata01/prsmdata/Data_12.dbf
input datafile fno=00014 name=/q02/oradata01/prsmdata/Data_18.dbf
input datafile fno=00023 name=/q02/oradata01/prsmdata/Data_02.dbf
input datafile fno=00028 name=/q02/oradata01/prsmdata/Data06.dbf
input datafile fno=00019 name=/q02/oratmp01/prsmdata/rbs02.dbf
input datafile fno=00021 name=/q02/orasys01/prsmdata/DRSYS.dbf
channel ORA_DISK_3: starting piece 1 at 30-MAY-07
channel ORA_DISK_4: starting incremental level 0 datafile backupset
channel ORA_DISK_4: specifying datafile(s) in backupset
input datafile fno=00007 name=/q02/oradata01/prsmdata/Data_11.dbf
input datafile fno=00013 name=/q02/oradata01/prsmdata/Data_17.dbf
input datafile fno=00018 name=/q02/oradata01/prsmdata/Data_01.dbf
input datafile fno=00006 name=/q02/oradata01/prsmdata/Tools01.dbf
input datafile fno=00002 name=/q02/oradata01/prsmdata/Users01.dbf
input datafile fno=00026 name=/q02/oradata01/prsmdata/Data05.dbf
channel ORA_DISK_4: starting piece 1 at 30-MAY-07
channel ORA_DISK_5: starting incremental level 0 datafile backupset
channel ORA_DISK_5: specifying datafile(s) in backupset
input datafile fno=00004 name=/q02/oradata01/prsmdata/Data_15.dbf
input datafile fno=00011 name=/q02/oradata01/prsmdata/Data_16.dbf
input datafile fno=00017 name=/q02/oradata01/prsmdata/Data_22.dbf
input datafile fno=00027 name=/q02/oradata01/prsmdata/Data_05.dbf
channel ORA_DISK_5: starting piece 1 at 30-MAY-07
channel ORA_DISK_1: finished piece 1 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s61_s1 comment=NONE
channel ORA_DISK_1: starting piece 2 at 30-MAY-07
channel ORA_DISK_2: finished piece 1 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s62_s1 comment=NONE
channel ORA_DISK_2: starting piece 2 at 30-MAY-07
channel ORA_DISK_3: finished piece 1 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s63_s1 comment=NONE
channel ORA_DISK_3: starting piece 2 at 30-MAY-07
channel ORA_DISK_4: finished piece 1 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s64_s1 comment=NONE
channel ORA_DISK_4: starting piece 2 at 30-MAY-07
channel ORA_DISK_5: finished piece 1 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s65_s1 comment=NONE
channel ORA_DISK_5: starting piece 2 at 30-MAY-07
channel ORA_DISK_2: finished piece 2 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s62_s2 comment=NONE
channel ORA_DISK_2: starting piece 3 at 30-MAY-07
channel ORA_DISK_1: finished piece 2 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s61_s2 comment=NONE
channel ORA_DISK_1: starting piece 3 at 30-MAY-07
channel ORA_DISK_4: finished piece 2 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s64_s2 comment=NONE
channel ORA_DISK_4: starting piece 3 at 30-MAY-07
channel ORA_DISK_5: finished piece 2 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s65_s2 comment=NONE
channel ORA_DISK_5: starting piece 3 at 30-MAY-07
channel ORA_DISK_3: finished piece 2 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s63_s2 comment=NONE
channel ORA_DISK_3: starting piece 3 at 30-MAY-07
channel ORA_DISK_2: finished piece 3 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s62_s3 comment=NONE
channel ORA_DISK_2: starting piece 4 at 30-MAY-07
channel ORA_DISK_4: finished piece 3 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s64_s3 comment=NONE
channel ORA_DISK_4: starting piece 4 at 30-MAY-07
channel ORA_DISK_1: finished piece 3 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s61_s3 comment=NONE
channel ORA_DISK_1: starting piece 4 at 30-MAY-07
channel ORA_DISK_2: finished piece 4 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s62_s4 comment=NONE
channel ORA_DISK_2: backup set complete, elapsed time: 00:53:23
channel ORA_DISK_5: finished piece 3 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s65_s3 comment=NONE
channel ORA_DISK_5: starting piece 4 at 30-MAY-07
channel ORA_DISK_3: finished piece 3 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s63_s3 comment=NONE
channel ORA_DISK_3: starting piece 4 at 30-MAY-07
channel ORA_DISK_4: finished piece 4 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s64_s4 comment=NONE
channel ORA_DISK_4: starting piece 5 at 30-MAY-07
channel ORA_DISK_1: finished piece 4 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s61_s4 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:59:04
channel ORA_DISK_3: finished piece 4 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s63_s4 comment=NONE
channel ORA_DISK_3: backup set complete, elapsed time: 01:00:10
channel ORA_DISK_5: finished piece 4 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s65_s4 comment=NONE
channel ORA_DISK_5: backup set complete, elapsed time: 01:00:25
channel ORA_DISK_4: finished piece 5 at 30-MAY-07
piece handle=/iasrman/q02/prsmq02/prsmq02_df623931654_s64_s5 comment=NONE
channel ORA_DISK_4: backup set complete, elapsed time: 01:01:40
Finished backup at 30-MAY-07
Starting backup at 30-MAY-07
current log archived
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 05/30/2007 11:22:38
RMAN-06004: ORACLE error from recovery catalog database: ORA-03114: not connected to ORACLEconnect target /You need to inform the connection string to target database.
Can to be explicitly or with 'export sid' in your script. -
Output type in Purchase Orders, erroring out for some users
Hi All,
We have a custom ouput type for PO, say 'ZZZ'. The problem is we do not get this out put type in the message screen of PO for some users and some time it gets populated for the same users. Please help me in understanding this issue as we are unable to track the things.
Thanks,
AmitHi
Please check the maintenace of the condition record, Check the key combination used. The conditon records are mainatined based on the organisational parmeters & the Vendor data.
Please check the PO's in whcih the message are not coming automatically & check the combination exist or not as condition records.
You can check the condition records using MN05, MN06
Award points if useful
Thanks & Regards
Kishore -
How to create a popup of error message for multiple entries
hi
i am trying to create a pop-up message window where more than one error is stored like MIGO transaction when we click on post .
thanks
OniPlease check the belw programs
SBAL_DEMO_04_POPUP
BCALV_GRID_AND_POPUP
BCALV_TEST_GRID_ONPOPUP
BALV_POPUP_TO_SELECT
Hope this helps.
Regards,
Bhargav. -
Alternative for / Problems with: "For all entries in data_package"
Hi Guys
I doing some ABAP in a Start Rotine in BW and would like to do the following:
select * from /BI0/PMATERIAL into table 0mat
for all entries in DATA_PACKAGE
where material = DATA_PACKAGE-/bic/zmaterial.
But I get the following error:
E:When using the addition "FOR ALL ENTRIES IN itab", the fields "MATERIAL" and "DATA_PACKAGE-/BIC/ZMATERIAL" must have the same type and length. and length.
ZMATERIAL:
- Length: 28
- Type: CHAR - Character String
ZMATERIAL:
- Length: 18
- Type: CHAR - Character String
According to the error message "For all entries" cannot be used in this case since the lengths are not identical, but is there an alternative way to do what I would like to do?
Thanks in advance, kind regards,
TorbenHi
one thing you can try like this define one variable in other itab of same type
then loop at the first table and assign it to new field and modify the itab
then use this field with for all entries
Regards
Shiva
Maybe you are looking for
-
Point of view on running Mountain Lion on a late 2011 Mac Book Pro?
I bought my MacBook Pro a couple of days before the current genneration came out in June of 2012. I was told that Mountain Lion would run well even on the older genneration and I was convinced by the 'genius' that it would be well worth it to buy th
-
The song...could not be used because the original file could not be located
I just used Garageband this past Sunday, no problem...I open it up tonight and I get this message: "The song...could not be used because the original file could not be located." I click the OK button and it comes up with another song title, and I hav
-
How to create a fillable field in Adobe Lifecycle Designer
Hello, i want to creat PDF with data. In this pdf ther should be fillable field that could be filled out by customer if I send him the PDF. How do i create such a pdf or such a fillable field? Thanks
-
AMFPHP and AS3FLEXDB - how to disable 'busy indicator' during query execution ?
I'm doing some experiments with Flex and SQL with use of as3flexdb and AMFPHP. I've written some application which is pushing some data to SQL base... problem is, that durring query execution, there is some 'busy indicator' on the screen - some circl
-
Hi All, I have an extractor that extracts data with DATEFROM and DATETO fo rthe time dependent HR employee related data for managers. But when it extracts into BI and loaded to Info Object the DATEFROM is not the same as what is extracted, it is 01/0