Validation failure resetting the values

Hi,
when ever the validation fails on a specific text field, it is resetting the value of the field. Is there any possibility to retain the value in the text field even the validation fails.
Thanks and Regards,
S R Prasad

I created the validation rule on entity attribute and then created inputText on the user interface. If the validation fails it is resetting the value of the field to the original value (I have tested it on the data field)
Thanks and Regards,
S R Prasad

Similar Messages

  • Report With Multiple Radio Button ,How to reset the values of when selected

    Reaching out to the experts here. I have a report which i created a radio group which saves the value rownum when the radio buton is selected to a hidden item based on an on click event. There are currently 3 radio button , i need to be able to "reset" the value of the other items when more than of the button are selected .I.E. There are 3 buttons, user clicks button one , but then decides they need to click button two , then realizes they really wanted to perform button 3 , I want to be able to "reset" the value of the 1st two hidden items so the only value populated is the 3rd hidden item. I am new to working with these features and scenarios so any and help would be appreciated.
    Here is the report
    SELECT APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN1'').value=' || ROWNUM|| '"') UPDATE_RECORD
    ,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN2'').value=' || ROWNUM|| '"') DELETE_RECORD
    ,APEX_ITEM.RADIOGROUP(1, ROWNUM, NULL,NULL,'onclick="javascript:$x(''P5_HIDDEN3'').value=' || ROWNUM|| '"') SET_PRIMARY
    ,papf.first_name
    ,papf.last_name
    ,hl.meaning
    ,pp.phone_number
    ,case when phone_type is not null then (select meaning from hr_lookups where lookup_type ='PHONE_TYPE' and pp.phone_type=lookup_code)
    end as phone_type
    ,emrg.primary_contact_flag
    from hr.per_all_people_f papf
    ,apps.hr_lookups hl
    ,apps.per_contact_relationships pcr
    ,apps.per_phones pp
    ,(select contact_person_id,primary_contact_flag
    from apps.per_contact_relationships pcr
    where pcr.person_id = :P5_PERSON_ID
    and contact_type = 'EMRG') emrg
    where pcr.contact_person_id in emrg.contact_person_id
    and pcr.personal_flag='Y'
    and contact_type <> 'EMRG'
    and trunc(sysdate) between date_start and NVL(date_end,'31-DEC-4712')
    and pcr.contact_type = hl.lookup_code
    and hl.lookup_type='CONTACT'
    and pcr.contact_person_id = papf.person_id
    and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
    and pcr.contact_person_id = pp.parent_id
    and pp.phone_type in (select lookup_code from hr_lookups where lookup_type ='PHONE_TYPE')

    Related thread here How to Pass values from SQL Report into TEXT ITEM ?
    Regards,

  • How to reset the value in valueChangeListener

    I would like to reset the value in a component to its earlier value in the valueChangeListener.
    Here is an example method in the bean:
    public void valueChangeListener(ValueChangeEvent valueChangeEvent) {
    Date oldDate = (Date)valueChangeEvent.getOldValue();
    Date newDate = (Date)valueChangeEvent.getNewValue();
    if(newDate > sysdate) {
    //valueChangeEvent.getComponent().WHATEVER.setValue(oldDate)
    } else {
    valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
    Please suggest the code that I need to put in comments.
    Note: One way to achieve this is to bind the component to the bean and do a setValue. I do not want to do this(I have master-detail tables with many rows to edit. So, this resetting should be done at row level by fetching the current row on the selected table and set).

    public void firstNameChanged(ValueChangeEvent event)
    System.out.println("FirstName changed");
    System.out.println("old value = " + event.getOldValue());
    System.out.println("new value = " + event.getNewValue());
    String oldValue = (String) event.getOldValue();
    String newValue = (String) event.getNewValue();
    RichInputText firstname = (RichInputText) event.getComponent();
    RichInputText lastname = (RichInputText) JSFUtils.findComponentInRoot("EmployeesLastName");
    firstname.setSubmittedValue(oldValue);
    firstname.setValue(oldValue);
    lastname.setSubmittedValue("lastname");
    lastname.setValue("lastname");
    AdfFacesContext.getCurrentInstance().addPartialTarget(firstname);
    AdfFacesContext.getCurrentInstance().addPartialTarget(lastname);
    }

  • How can I reset the value of an array?

    How can I reset the value of an array at the beginning of my program?

    There is a option in LV,
    "Edit --> Make current value defult"
    Every time you reopen your VI, it will set to your custom default value.
    There are many ways of doing this.
    Another way of doing this is, You can use "sequence structure and property node". Make the property node of your array and choose "value". Then mark it to write. See attach.
    When you feel sad, laugh
    Attachments:
    x.GIF ‏4 KB

  • JSF Validation failure causes entered values to be lost

    I've created a JSP that has required="true" and a requiredMessage on several elements.
    If any one element on the page fails it's validation on submit(ie was left blank), when the screen is redrawn all the entered values have disappeared.
    This is obviously not going to be acceptable to a user as there may have been 5 valid entries and one mistake, and they now have to retype every entry.
    Can anyone suggest why the form might be being cleared like this?

    I'm using reference implementation 1.2 04-b10
    I've tried using an implementation of validator and it makes no difference.
    It's the only example of an inline validator other than required, which seems to work ok.
    I've got around the problem for now by doing the validation in the method called when the user hits submit. It's not quite right as if the 'required' validation fails they get mutliple messages showing these failures, but the codeRef validation doesn't even fire until all the other validation passes.

  • Getting mandatory attribute validation error when the value is defaulted through customization

    Hi
    I am getting Mandatory attribute validation error when we default the value through customization.
    In the UI we have attribute called Last Name which is mandatory at EO level. Customer wanted to default Last name to some value, through page composer it is defaulted to some text and saved.
    When ever we open the page the the same value is defaulted as Last Name and appearing in the UI. But when we submit the page, EO level validation is failing. hence we are getting last name is missing.
    When i debug the code last name attribute value for EO is blank.
    In the UI the attribute last name is associated with bindings  --> #{bindings.lastname.inputvalue}
    The validation is failing if we remove the default binding associated with inputtext box.
    Can some body help what can be reason and is there any solution?
    Thanks,
    Praveen

    version 12.1.2
    I am struggling with same situation, I can't set the default value at business component because, the default value comes from a REST service at run time. In page A,  I have a field F1 that contains value from REST service. Page B has a database bound field F2, whose default value should come from F1 in Page A when a user navigates from Page A to Page B. If I set the value of F2 to be the value of F1, then it displays the value in the UI, but nothing gets submitted to EO and fails at commit.
    To make things difficult, here is my situation: Page A lives in bounded taskflow TF1, and Page B lives in bounded taskflow TF2. So I have created an input parameter P1 in TF 2, which carries over the value of F1 in Page A to Page B. When I am in Page B, I can successfully see the value of the taskflow input parameter P1. So, how do I  programmatically set the value of field F2 with the value of input parameter P1?
    I tried setting the F2.inputValue  in a method call M1 in  taskflow TF2 prior to Page B, but I get null pointer exception as it can't see field F2 yet.
    It seems like a simple thing to do, but I have spent a lot of time trying to make it work without any success.
    I would greatly appreciate any guidance.

  • Reset button not resetting the values.

    Hi Experts,
    I am using Reset Button in the dashboard.
    When i click on the button the values are not getting reset.
    Do i need to do any thing other than drag drop of the reset button on to the canvas.
    Thanks in Advance,
    Bhargava Bommidi.

    Hi Alam,
    Thanks for your reply.
    I have a label component linked ith a push button for data change. I.e evry time i click on the push button, the  value in the label component changes. Now after playing with the push button if i want the dashboard to come to the original state i need to use reset button.
    But the reset button is not bringing dashboard to the original state.
    Thanks in Adavance,
    Bhargava.

  • How to reset the value of drill down - Chart

    Hi gurus. I have a problem related with drilldown.
    is there any way I can reset the drill down value?,of course, except for using reset button
    (in  this case "reset" means "make the cell blank of certain value")
    I tried using "push button" and the cell is reset.
    However, even though the cell is reset, the cell is set to the drill down value in one second.
    ex. Drill down destination : a --> "" --> a
    (a is drill down value)
    Is there a way to reset the drilldown value?
    Thanks in advance.

    Thanks for your help , Sonja
    I used push button but it can not refresh(reset) drill down cell
    because the destination cell of the chart remains drill down value
    I tried like below way
    a : drill down value
    Goal : make drill down cell turn to blank after i used drill down once.
    1ST.
    when i click the chart and use drii down, a is entered into drill down cell
    2ND
    by using "push button", i tried to reset drill down cell
    but unfortunately it does not work.
    Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
    drill down cell changes like this
    1 ->   2   ->  3
    a -> blank ->  a
    i have to eliminate (2->3) phase or find another way to refresh drill down cell.
    Regards
    Kwon

  • JSF Validation failure causes input values disappear

    I am using a custom validator in my application by creating a class that implements javax.faces.validator.Validator. I use this validator for some input fields. When the validation fails the values that the user has entered are lost. Is their any way that we can keep these values? These input fields are in DataTable.
    - Sandeep.
    Edited by: sgatl2 on Mar 24, 2010 10:41 AM

    If you see the JSF lifecycle, the validation phase comes before the update values phase.
    So if your custome validator fails, the model will not change.
    I would suggest you try with client side validation without a page refresh/server call.

  • Reset the Value

    I have a Number:textinput component on the stage with a
    default value of 20 and a label component next to it. If a user
    types in a number >= 51 the label displays "Maximum is 50". My
    question is: How can I reset the textInput back to the default
    value if a user types in a number >= 51? Here is my function so
    far:

    >>Number(51))
    51 is already a number... you don't need to cast it.
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • How can I reset the value of an indicator in a while loop, from another synchronous while loop?

    I am running 2 synchronous while loops, one which is keep track of time, and the other is measuring periods. In the while loop that is measuring periods, I have a boolean indicator displaying whether the signal is on or off. My problem is that when the signal is off, the VI I use to measure the periods is waiting for the next signal, and displays the boolean value from the previous period measurement. While this VI is waiting, I want the indicator to display false and not the value from the last iteration of the loop.
    I am using LV 5.1 for MAC.

    Two things you can try:
    In preface to the first, the most common (perhaps ONLY) use of local variables should be in transferring data between parallel loops. This is a matter of discipline, and creates programs that are easier to understand, take less time and memory, and are just plain cleaner. Having said that, to transfer data between loops, use a local variable.
    Second solution: Instead of setting the value to false, just hide the indicator in question by using control references (property nodes for prev. version of LabVIEW). Control references are a great way to control items on a dialog or HMI screen.

  • How to reset the value of a static attribute in a class (in SAP CRM)

    Following the documentation in  "C04_BB_ConfigGuide_EN_DE.doc".
    I created a logical link for a remote ERP transaction from CRM7.0  
    The link to this file is http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm then Technical Information --> Building Block Library.
    I made a mistake in the defining MappedLogSys name for the remote ERP system in Tcode CRMS_IC_CROSS_SYS.
    Later I deleted the wrong entry using tcode CRMS_IC_CROSS_SYS and created the correct entry for the remote ERP system.
    But whenever I try to create a new Link for ERP transaction in the CRM system using the wizard, (tcode CRMC_UI_ACTIONWZ), the wizard pickes up the deleted logsys name.
    Using  tcode SE24  & the Test icon (F8) I ran a test for the class CL_ERP_TX_MMBE and the value of the attribute "GV_MAPPEDLOGSYS" is set to the old deleted value.
    How Can I fix this issue and make the class pickup the correct MappedLogSys value.

    I basically deleted the transaction launcher link and recreated a new one.

  • Af:table and selectOneChoice, creating a new row resets selected value

    Hello,
    I have a table containing 4 columns, first two are read-only (outputtext) and next 2 contains selectOneChoice , table model is baed on java.util.List
    adding a new row, works fine but it resets the selectOneChoice(dropbox) selected value to First Index For All Rows
    so everytime you add a new row, it resets the value to the very First Value in the dropbox for all rows,
    it seems after PPR it loses the selected value in SelectOneChoice for each row...
    any ideas?
    Thanks,

    Hi,
    What is the EL expression given for value property of selectOneChoice list?
    I guess it is the bean variable and it is same for each row, due to which selection in any selectOneChoice list in table modifies the same bean variable and sets the same value for lists in all other rows too(same happens in case of new insertion also, when you insert new record selectonechoice list points to the first value if no selection item is not added), in case of selectonechoice list you need to handle the selected values differently for each row. If you can share sample code, I can tell you what could be the problem.
    Sireesha

  • Resetting calculated values  in Answers pivot tables

    We have a a pivot table whereby we summarize by zones. Our calculation is derived using running aggregates.
    E.g
    Zone name | Value 1 | Value 2 | Calc Value
    Zone A X y x/y
    Zone B A B A/B
    However we are unable to reset the value of our running aggregate when our zone changes. Hence for Zone B in the example we are getting a value = (X+A)/(Y+B) when we want A/B.
    We are calculating our values at previous 7 day intervals so hence these have to be calculated at run time
    We are in 10.1.3.4
    All help would be appreciated.
    Thanks

    Hi,
    you can with this syntax inside the column Calc Value of a table view:
    RSUM(Value 1/Value 2 by Zone name)
    Hope it helps.
    Regards,
    Gianluca

  • How to zero the values that are greater than 0 at time 0?

    Hello, New user,
    I would like to know how to zero values that are greater than 0 at time 0.  I am totalizing gas flow and understand how not to add the negative numbers but am unsure about the positive numbers at 0 flow.  I hope I have explained this good enough.
    Thank you,
    Lisa

    I don't understand why the value which should be 0 is actually greater than 0.
    How do you determine that the value should be 0, such as no flow, even if the value is greater than 0?
    Ryan Shi
    Hello Ryan,
    The system itself may have an offset of 0.1 V which in the program is related to flow.  I do not wish to add this .1 as flow.  I want to beable to reset the values to 0 and then when there is flow, to add the flow.   If you purchase a program from some vendors you can zero the channel, that is my goal.  I want this to be automatic when a switch is pressed.  Such as:  for 20 seconds, average channel, and use that value as 0 flow then add flow??   I was told averaging may work??
    Thank you again,
    Lisa Williamson

Maybe you are looking for