Validation provider in CSV GTC in OIM

Hi,
We are trying to restrict status code coming from the feed file to 0,1,2,3 only.
So, I am including a validation check - "Is in Range" and provide max limit as '3' and min limit as '0' and data type as 'integer'.
But even if I provide status code value as '3' and try to run the reconciliation task - it throws error:
"Validation Failed. Cannot reconcile"
Please suggest.

Remove the "Is in Range" validation.
Put the validation "Match Regular Expression" and use the value as 0|1|2|3
~Ketan

Similar Messages

Validation Provider in GTC

Hi,
I would like to add a validation provider "IsNotBlankOrNull" in my GTC attributes.May I know what step I need to follow to do this? (Do I need to write any Java Code etc? ).Thanks.

Navigate to the attirbute mapping screen of your GTC, STEP 3 to be precise. Under the source attributes, select the attribute you want to validate and click the Edit link --> hit continue --> in the drop down select the validator you want to add and save it.

Principal validation provider

I have my customized principal validation provider and
customized principal class. Both of them
are now included in the MBean.jar file.
The problem is that
NoClassDefFound exception happens when
the FAT client tries to look up EJB home using
the subject(that contains customized principal).
I have tried different ways of jaring my classes.
I tried to put an extra jar on the class path after
weblogic.jar. Still no luck.
I have exhausted all the means possible to me.
Can Bea support people step up and help us ?

The format of the pasted code should look better in this reply....
"troy hart" <[email protected]> wrote:
>
Hello,
I wonder if sombody can tell me if instances of the principal class I
have attached
to this post will be validated by the default principal validation provider???
package org.rps.weblogic.security.principal;
import org.rps.security.spi.RPSGroup;
import weblogic.security.principal.WLSAbstractPrincipal;
import weblogic.security.spi.WLSGroup
* An implementation of a Group principal that will be
* validated by the default weblogic Principal Validation
* Provider in Weblogic Server.
* @author Troy Hart
public
class RPS_WLSGroupImpl
extends WLSAbstractPrincipal
implements WLSGroup, RPSGroup
public
RPS_WLSGroupImpl(String groupName)
super(groupName);
Many Thanks!!!
Troy

Default principal validation provider

Hello,
I wonder if sombody can tell me if instances of the principal class I have attached
to this post will be validated by the default principal validation provider???
package org.rps.weblogic.security.principal;
import org.rps.security.spi.RPSGroup;
import weblogic.security.principal.WLSAbstractPrincipal;
import weblogic.security.spi.WLSGroup
* An implementation of a Group principal that will be validated
* by the default weblogic Principal Validation Provider in Weblogic
* Server.
* @author Troy Hart
public
class RPS_WLSGroupImpl
extends WLSAbstractPrincipal
implements WLSGroup, RPSGroup
public
RPS_WLSGroupImpl(String groupName)
super(groupName);
Many Thanks!!!
Troy

The format of the pasted code should look better in this reply....
"troy hart" <[email protected]> wrote:
>
Hello,
I wonder if sombody can tell me if instances of the principal class I
have attached
to this post will be validated by the default principal validation provider???
package org.rps.weblogic.security.principal;
import org.rps.security.spi.RPSGroup;
import weblogic.security.principal.WLSAbstractPrincipal;
import weblogic.security.spi.WLSGroup
* An implementation of a Group principal that will be
* validated by the default weblogic Principal Validation
* Provider in Weblogic Server.
* @author Troy Hart
public
class RPS_WLSGroupImpl
extends WLSAbstractPrincipal
implements WLSGroup, RPSGroup
public
RPS_WLSGroupImpl(String groupName)
super(groupName);
Many Thanks!!!
Troy

Creating GTC in OIM 11g (11.1.1.3.0)

Hi,
I'm trying to install Generic Technology Connector (Database_App_Tables_9.1.0.5.0) and to configure the target sysatem as a trusted source reconcilation task in OIM 11g 11.1.1.3 but I get a lot of problems. I used the following quides to do that:
1) Oracle® Identity Manager Connector Guide for Database Application Tables Release 9.1.0
2) racle® Fusion Middleware Developer's Guide for Oracle Identity Manager 11g Release 1 (11.1.1)
First of all, these quides don't correspond to the OIM 11g or I'm not smart enough to understand them. On the step 3 of configuration target system as a trusted source I can't find some of the mandatory fields of the OIM User form. The Guide tells me that mandatory fields are: User ID, First Name, Last Name, Employee Type, User Type, Organization. But in the User form only some of them represented: First Name, Last Name, Organization.
Nevertheless I configured my system as follows:
1) I'd created table EMPLOYEES with columns LOGIN, FIRSTNAME(primary key), LASTNAME, ORGANIZATION in my Oracle DB. I'd add one row in my table useru, User, User, Xellerate Users.
2) I'd configured my connector as follows:
step1:
Name      Test
Reconciliation           select
Transport Provider Database Application Tables Reconciliation
Format Provider      Database Application Tables Reconciliation
Trusted Source Reconciliation selected
step2:
Database Driver      oracle.jdbc.driver.OracleDriver
Database URL      jdbc:oracle:thin:@localhost:1521:orcl
Database User ID      system
Database Password *******
Parent Table/View Name EMPLOYEES
Reconcile Deletion of Multivalued Attribute Data not selected
Reconciliation Type Full
step3:
source reconciliation staging OIM
LOGIN---------------->LOGIN-------------------------------------->User Login
FIRSTNAME-------->FIRSTNAME------------------------------->First Name(Matching only)
LASTNAME--------->LASTNAME------------------------------->Last Name
ORGANIZATION-->ORGANIZATION------------------------>Organization
After running TEST_GTC schedule, reconciliation is finished without errors in OIM log file and reconciliation evet is created.
The Reconciliation data of this event looks like:
Attribute Name Attribute value OIM mapped field
LOGIN useru User Login
FIRSTNAME User First Name
LASTNAME User Last Name
ORGANIZATION Xellerate Users Organization Name
The History of this event looks like:
Event Recieved
Data Validation Succeded
No User Match Found
Creation Faild
Notes: ORA Error Code =>ORA-01400: cannot insert NULL into () ORA Error Stack =>ORA-06512: at DEV_OIM.OIM_SP_RECONBLKUSERCRUD", line 722
Has anyone any ideas how to get through this?
Thanks in Advance!

Be a Good Guild Leader in the WOW Gold.By the way, we sincerely invite all game players whether you are newbie or veteran to Buy WOW Gold.Then, the icing on the cake: Your guild leader emu-raged when your husband made a comment about the(RS Gold) whole thing. To me, your husband reacted naturally. I probably would have said the same thing. The only person doing something "wrong" in this situation was your guild leader. The bottom line is this: It's not a guild leader's place to(Lotro Gold) "test" your behavior. Honestly, I can't imagine a context in which it would be appropriate for (Metin2 Gold)anyone to do this, under any circumstances. The sheer self-righteousness of it nauseates me.

Validating User Defined Fields on the OIM User Object

Hello everyone,
I'm currently using the OIM 11g, and am curious how to provide data validation for user defined fields.
We currently have two user-defined fields for day of birth and month of birth, which have been set to required, but I would like to take this a step further and actually validate that the data being entered is numerical (two characters max), and if it's not, a red box appears around the field notifying the admin that the entry needs to fit the expected criteria.
One example already in OIM is that of the email field. It appears to be using a regex to identify that data entered is of a certain format.
Can anyone here point me in the direction of some proper documentation so that I may learn how to incorporate this into my environment? Thanks!

Hi Kate,
The only way to do it, is with Form Settings. Do not give them authorisations on Form Settings. You can then untick the "Active" tick box on certain fields and tick it on others. This can then be done, when you log on as the user him/herself.
Regards
Carin

How to import data from CSV files to OIM?

Hello,
We have to import some of the files which are in csv format and are placed in a specific folder hierarchy. Please help as i am not able to proceed further.
Thanks a lot!

To write custom scheduler tasks you need to write a class which extends SchedulerBaseTask class.
See this link. Re: Custom reconcilation
Also GTC flat file retrieves data from file and creates identity/account in OIM. You can use either ways to meet your requirements.

Validation is not working properly in OIM 10g

I have a below scenario in OIM10g…
1. Users of group A have the permission to provision a resource to “Dummy1”.
2. Users of group B have the permission to deprovision resource from “Dummy1”.
I have one admin user which belongs to both group that A and B, now suppose this admin user try to deprovision multiple resources by selection the corresponding check box . Say resource “Dummy1” and “Dummy2”, then in OIM we are getting error message “You do not have permission to perform this activity”, and none of process task is triggered in OIM and status is still showing as Provisioned. But at the resource “Dummy1” user is getting deleted.
Request you please help me on this.
Thanks
Edited by: 953339 on 17/08/2012 03:35

Thanks Kavin,
It is working fine with positive testing and failing during the negative testing.
Can I put an entity adapter for validating this ? if yes what would the steps.
Edited by: 953339 on 21/08/2012 03:21

Required fields for GTC in OIM 11.1.1.5

There is a lot of bad info out there on this topic. If you export the Create User workflow from MDS you will see one thing. The docs tell you another thing. Forum posts tell you another. So I wanted to post what worked for me with 11.1.1.5 It may not be the bare minimum you need OOB but it is close to it:
first name
last name
user login - make this your unique ID - also when you are mapping attributes in GTC make sure you checkmark "mapping only" for this field only which tells oim to use it as the unique id during recon
organization - I used "Xellerate Users" but there are other options.
role - I used "Full-Time" but there are other options. Notice that when you create a user manually in the ui dropdown it shows 'full-time employee' which adds to the confusion.
user type - I used "End-User" but there are other options.
I also hardcoded those literals in my sql with aliases. It is faster than using the gtc ui to create literals. Hopefully this info helps someone.

The documentation does not spell this out clearly enough - especially the "mapping only" requirement.
Good to know about hardcoding literals.
Thanks.

Access is denied messages in Win2012 R2 Failover Cluster validation report and CSV entering a paused state

Been having some issues with nodes basically dropping out of clusters config.
Error showing was
"Cluster Shared Volume 'Volume1' ('Data') has entered a paused state because of '(c000020c)'. All I/O will temporarily be queued until a path to the volume is reestablished."
All nodes (Poweredge 420) connected a Dell MD3200 shared SAS storage.
Nodes point to Virtual 2012 R2 DC's
Upon running validation with just two nodes, get the same errors over and over again.
Bemused!
List Software Updates
Description: List software updates that have been applied on each node.
An error occurred while executing the test.
An error occurred while getting information about the software updates installed on the nodes.
One or more errors occurred.
Creating an instance of the COM component with CLSID {4142DD5D-3472-4370-8641-DE7856431FB0} from the IClassFactory failed due to the following error: 80070005 Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)).
and
List Disks
Description: List all disks visible to one or more nodes. If a subset of disks is specified for validation, list only disks in the subset.
An error occurred while executing the test.
Storage cannot be validated at this time. Node 'zhyperv2.KISLNET.LOCAL' could not be initialized for validation testing. Possible causes for this are that another validation test is being run from another management client, or a previous validation test was
unexpectedly terminated. If a previous validation test was unexpectedly terminated, the best corrective action is to restart the node and try again.
Access is denied
The event viewer on one of the hosts shows
Cluster node 'zhyperv2' lost communication with cluster node 'zhyperv1'. Network communication was reestablished. This could be due to communication temporarily being blocked by a firewall or connection security policy update. If the problem persists
and network communication are not reestablished, the cluster service on one or more nodes will stop. If that happens, run the Validate a Configuration wizard to check your network configuration. Additionally, check for hardware or software errors related
to the network adapters on this node, and check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk.
Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected
such as hubs, switches, or bridges.
Only other warning is because the 4 nic ports in each node server are teamed on one ip address split over two switches - I am not concernd about this and could if required split then pairs, I think this is a red herring????

Hi,
Such events happen because of the following reason:
1- Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks not enabled on all network interfaces. Check this KB article: http://support.microsoft.com/kb/2008795
. Please make sure these two protocols are enabled on all cluster networks
2- Network connectivity issue can cause this event as well. Please make sure the network cabling/Cards/Switches are correctly configured and working as expected
3- Connectivity issue with the storage can also cause this event. Please make sure all the nodes are connected to storage. Check HBA/Cabling connectivity to SAN. Make sure
that the SAN drivers are up-to-date.
4- Antivirus may interrupt network communication and cause this failure. Please exclude CSV volumes from being scanned by AV: http://social.technet.microsoft.com/wiki/contents/articles/953.microsoft-anti-virus-exclusion-list.aspx
5- Disable TCP Chimney related settings on all cluster nodes. http://support.microsoft.com/kb/951037
6- Please check the Network Binding Order (http://social.technet.microsoft.com/Forums/windowsserver/en-US/2535c73a-a347-4152-be7a-ea7b24159520/hyperv-r2-csv-cluster-recommended-binding-order?forum=windowsserver2008r2highavailability)
7- Firewall Rules For All Inbound and Outbound For Cluster and Hyper-V for all the Profiles
8- Update NIC Driver/Firmware.
9- Check Compatibility of the NIC with Windows Server 2012R2
10- Set-NetAdapterRss - Resources and Tools for IT Professionals | TechNet : http://technet.microsoft.com/en-us/library/jj130863.aspx
11- Check the Following Article http://social.technet.microsoft.com/Forums/windowsserver/en-US/e06fede9-931c-4dee-8379-4fd985e20f0a/hypervvmswitch-eventid-106
12- General Updates to be applied on the nodes :
Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2 update rollup: November 2013 : http://support.microsoft.com/kb/2887595
Windows 8.1 and Windows Server 2012 R2 General Availability Update Rollup :
http://support.microsoft.com/kb/2883200
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can you please provide the .csv files used in Power BI Getting Started Guide

Hi Team,
I am exploring the Power BI app developed by Microsoft on My Windows 8 machine
For that I found the Getting started guide from the below link
http://office.microsoft.com/en-in/excel-help/power-bi-getting-started-guide-HA104103589.aspx?CTT=5&origin=HA102835634
Power Query and Power Pivot are totally new to me and I am trying to learn more on it
While trying to execute the steps given in the starting guide I found that it requires 2 csv files (NYSE Daily 2009 and same for NASDAQ) for mashing up data agaist S&P 500
I tried to get from web, but unfortunately not getting the required data
Can you please provide the test data (the 2 csv files NYSE Daily 2009 and NASDAQ daily 2009) using which I will resume my work in Power BI?
Thanks in advance
Rajendra
InfoCepts( Specialists in Onshore and Offshore BI)
Rajendra Kitukale InfoCepts(Specialists in Onsite and Offshore BI)

Hi, all -- here are links to the CSV files.
NYSE sample data:
http://go.microsoft.com/fwlink/?LinkID=389692
NASDAQ sample data:
http://go.microsoft.com/fwlink/?LinkId=389693
Hope that helps!
Maggie Sparkman

One-to-Many attribute mapping in CSV GTC

Hi,
I have a field in the feed file as STATUS_CODE which contains numeric values – 0,1,2,3.
Now, we have a requirement to populate status values based on these values to two different fields – OIM OOTB “Identity Status” and a custom field “Employee Status”.
Identity Status accepts values such as ‘Active’ , ‘Disabled’ etc.: Lookup.StatusCodes
Active     3
Disabled     0
Disabled     1
Disabled     2
Employee Status accepts values such as ‘Active’, ‘Inactive’, ‘Retired’, ‘Terminated’: Lookup.Status
Active     3
Terminated     0
Inactive     1
Retired     2
Now I am creating a custom field in “Reconciliation Staging” and mapping that to OIM OOTB status field. I am translating the numeric values using a lookup table - Lookup.ZFS.StatusCodes.
And, I am mapping the STATUS_CODE to custom field Person Status and translating using the lookup table - Lookup.Status.
But both these lookups are synchronized and always hold same set of values.
How can I separate these and how can I realize this requirement through GTC?

Hi,
Your task can also be achieved by using a user defined JAVA function. the advantage of using a user defined function is, you can implement your logic easily. If the node satisfies your logic you add it to ResultList else you let it free.
This way ur mapping can be made easier. The other steps for going about is clear in the blog specified above. am also giving the link to that blog:
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
regards,
P.Venkataramanan

GTC in OIM

HI,
I have created a GTC but I can't see any rule in reconcn rules form for GTC, not even name of GTC I have
Xellerate and SAP only two
.GTC is getting created successfully?
Error while doing recon?
Thanks
IDM
Edited by: IDM on Jun 18, 2009 1:39 PM

The mapping between attributes of reconciliation dataset and User dataset are used to create the reconciliation rule. By default, when you create the mapping between attributes of the two datasets, you will see "matching only" flag as checked.
For creating a recon field as key field for matching, you need to create a mapping between recon data set attribute and account dataset attribute with "matching only" flag checked.
You can go to manage GTC and create these mappings if you missed it while GTC creation

Validation Event Handler Not working with Flat File GTC Trusted Recon

We are created Event Handler for checking special characters in Telephone field.Its working fine when the user is created through Admin Console.but the event handler is not triggering while doing GTC Flat File Trusted recon.
Version: OIM 11.1.1.5.0
Can someone please help me out with this.
Thanks
Edited by: 790561 on 17-Feb-2013 09:01
Edited by: 790561 on Feb 17, 2013 9:35 PM
Edited by: 790561 on Feb 18, 2013 12:38 AM

Validation Event handlers will not work with your trusted recon. You can use the GTC Validation provider, it is nothing but the plugins which you can insert with in your source field in GTC. I think you can easily get the steps for how to create a custom GTC Providers.
Edited by: iam37 on Feb 16, 2013 4:09 PM

OIM: Basic CSV reconciliation question

I am reconciling users from flat file into OIM using GTC for OIM 9101. My data has manager ID field populated for all user records. While reconciling, OIM checkes if the user in the managerID field is present as a user in OIM. If it is not, then it does not put the value in the field. If it is present as a user in OIM, then it puts the value correctly.
This seems to be correct behavior, but while reconciling I cannot be sure to reconcile managers first, then users - almost impossible. Seems to be a basic issue, whats the usual way out? I can think of one.
Make the Manager ID field in the create user form a text field instead of a lookup, reconcile, then make it a lookup.
Is this how its always done, or there is a better solution. OIM is trying to be intelligent here, but it is not helping :-)
Thanks!

Hi,
I have encountered this problem.
The solution what i applied was.
1. Run the Scheduler with xelsysadm as the manager of all the records(change the csv and make xelsysadm as manager of all records).
2. After performing this step all the users and their respective managers will come in OIM
2. Run the Scheduler again with actual csv file. The manager update would happen this time.
Cheers
Ak

Validation provider in CSV GTC in OIM

Similar Messages

Maybe you are looking for