Validations not happening

hi ,
Im having a adf read only table and an adf form on separate jsf fragments on a same jspx file. I am setting a partial target on the selection listener on read only table such that i will get the values in form on selection of row in the table. But i am not getting data validation on form. that is if i delete the data from a mandatory feild and click another row in read only table with out saving the form, the old data gets reverted back on the blank mandatory feild, without showing any validation error. if i try to save then it is showing error. Please advice..
-Anoop Vijayan

Hi,
sounds like its doing the right thing in that the validation kicks in when you attempt to save an invalid attribute. If you want the same to happen when choosing a new row in a table, set the autosubmit property to true so it gets validated.
However, can you take complexitiy out of the equation and build a testcase that doesn't use page fragments to see if this reproduces ?
Frank

Similar Messages

Validation not happening on commit

Hi,
We have an inputText whose validation is defined at EO attribute level. There are two validations: a rangeValidator (0 to 100) and a method validator. We have an applicationsPanel which has 'Save' and 'Save and Close' buttons. In the task flow, Save action leads to 'Commit' and then to a router. Save and close action leads to 'Commit' and then back to parentAction.
The validation for the inputText is getting fired for Save but not for Save and Close.
We want the validation to be fired for both the buttons. Since Attribute validations are fired on commit, I do not understand why it is not getting fired on 'Save and Close'. Please help.

Check if the "Save and Close" button has been set with <tt>immediate="true"</tt>. Actions of command components having <tt>immediate="true"</tt> are executed early at APPLY_REQUEST_VALUES phase and then processing goes directly to RENDER_RESPONSE phase thus skipping any data submission and processing of other components (e.g. the data fields are neither submitted not validated). In this way the commit action would be processed before any data is submitted to the model layer. This is not a bug, it is so by design.
Dimitar

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Overhead calculation not happening after using orgin group.

overhead calculation not happening after using orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Auto Source determination not happening

Hi Guruz,
I have a material assigned to a quota arrangement usage in material master - MRP 2 View.
Source list maintained for the material/plant with 2 vendor codes and both releveant for MRP '1'
Quota arrangement maintained with proper validity periods.
But when i generate purchase requisitions via MRP, the source assignemnt is not happening. MRO generates PRs but the source of supply is blank. I have to assign the source either by ME57 or via 'assign source' tab in PR item details.
I have maintained EVO parameter in my user id also.
Not sure what I have missed. Please help!
Regards
Greg

Hi,
Please check following also -
1) Whether the vendor is not blocked for purchasing
2) If QM is activated & Delivery Release is required for the material, then check whether the Quality Info Record is maintained & the vendor is released for puruchase.
3) The scheduled delivery dates are lying inside the validity period of the Quota Arrangement & Source List
Regards,
Prasahnt Kolhatkar

PR to PO conversion should not happen in case of expired pricing condition in Info Record

Hi All,
Issue – PR to PO conversion should not happen in case of expired pricing condition in Info Record.
In case of creation of PR/ PO, the Price is pulled out from the Info Record of the material. In our case if the Price in the Info Record is expired, it should give the Error Message & should pick the Price from the last PO created for the same combination of Plant, Vendor, Company code.
Request you to please let us know if there is any way out.
Regards,
Karthick.V

Hi,
As per your requirement if info record price is not valid and in auto PO creation from PR, price should get picked from last PO, this is standard behavior and it will happen.
If you check in customization MM - Purchasing - Environment Data - Define Default Values for Buyers -Settings for default values
Default values if you check under price adoption , it has to be Always copy ( copying of conditions from last PO) . Pls check

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message

Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Reversal of a reversed document should not happen

Dears
In our system, user is able to reverse an already reversed document, which should not happen.
In the Message Control F5 361, nothing has been changed to make this warning or information.
Hence the standard is 'error'. But why the system is allowing the reversal of a reversed document then ?
Could you please provide inputs ?

Hello Nikitha,
Please create one validation according to your requirement. PFB the relevant T codes to create validation.
GGB0 - Create Validation
OB28 - Activation of FI validations
GCT9 - Transport: Validations
Please let us know do you still require any more information
Thanks & Regards,
Lakshmi S

JWSDP1.5: wscompile error: "(should not happen): tie.generator.002

Hi all,
I'm working with a doc/lit webservice; I have a WSDL and I'm attempting to generate Java artefacts with wscompile. I'm using JWSDP1.5. I've had a range of errors (I'm updating an old WSDL for the Tentative Hold Protocol, see http://www.w3.org/TR/tenthold-2/). The latest, though, is problematic. The final error message is:
error: generator error: internal error (should not happen): tie.generator.002I have included the full output from wscompile at the end of this posting; I'll post the full WSDL in a reply. Any advice would be much appreciated!
Cheers,
--Tim West
Full output (from wscompile Ant task) - added linebreaks for readability
Buildfile: C:\common\eclipse-projects\thp\build.xml
wscompile-init:
ANEW-generate-server-binding:
[wscompile] command line: wscompile -d C:\common\eclipse-projects\thp\zant-build \
-features:documentliteral,wsi -g -gen:server -keep -verbose \
C:\common\eclipse-projects\thp\server-wscompile-config.xml -classpath (path omitted for readability)
[wscompile] [CustomClassGenerator: generating JavaClass for: userDefinedBody]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdHeader]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdRequestAckHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyResponseChoiceHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyGrantHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdGrantHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdModifyDenialHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdDenialHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdCancellationRequestHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdCancellationResponseHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusQueryHdr]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusResponseBody]
[wscompile] [CustomClassGenerator: generating JavaClass for: statusStructure]
[wscompile] [CustomClassGenerator: generating JavaClass for: holdStatusResponseHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: userDefinedBody]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdHeader]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdRequestAckHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdGrantHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyGrantHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdDenialHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyDenialHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdModifyResponseChoiceHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdCancellationRequestHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdCancellationResponseHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusQueryHdr]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: statusStructure]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusResponseBody]
[wscompile] [LiteralObjectSerializerGenerator: writing serializer/deserializer for: holdStatusResponseHdr]
[wscompile] error: generator error: internal error (should not happen): tie.generator.002
BUILD FAILED: C:\common\eclipse-projects\thp\build.xml:342: wscompile failed
Total time: 2 seconds

Hi again,
The offending WSDL is below. I should add that I Googled this and couldn't find anything useful. Axis is happy with the WSDL, as is the validator at http://www.soapclient.com/SoapTools.html (though I'm not sure of its quality). I'm now downloading IBM Websphere 6 to see how that goes.
Thanks again,
-Tim West
<?xml version="1.0" encoding="UTF-8"?>
<definitions
    name="TentativeHold"
    targetNamespace="http://www.w3.org/2001/08/thp/definitions"
    xmlns:tns="http://www.w3.org/2001/08/thp/definitions"
    xmlns:holdSchema="http://www.w3.org/2001/08/thp/schemas"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
    <schema xmlns="http://www.w3.org/2001/XMLSchema"
        xmlns:holdSchema="http://www.w3.org/2001/08/thp/schemas"
        targetNamespace="http://www.w3.org/2001/08/thp/schemas">
      
      
      
      
      
      
      
      
      <complexType name="holdHeader">
        <sequence>
          <element name="holdID" type="int"/>
          <element name="customerID" type="string"/>
          <element name="replyTo" type="string"/>
          <element name="comment" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
        
      <complexType name="userDefinedBody">
        <sequence>
          <element name="someRequestField" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdRequestHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdRequestAckHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="timeUntilResponse" type="duration"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdGrantHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="holdDuration" type="duration"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdDenialHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="reason" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdModifyRequestHdr">
        <sequence>
          <element name="modifiedHoldRequest" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdModifyGrantHdr">
        <sequence>
          <element name="modifiedHoldRequest" type="holdSchema:holdGrantHdr"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdModifyDenialHdr">
        <sequence>
          <element name="modifiedHoldRequest" type="holdSchema:holdDenialHdr"/>
        </sequence>
      </complexType>
      
      
      
      
      
      
      <complexType name="holdModifyResponseChoiceHdr">
        <sequence>
          <element name="grant" type="holdSchema:holdModifyGrantHdr"/>
          <element name="deny" type="holdSchema:holdModifyDenialHdr"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdCancellationRequestHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
          <element name="customerReason" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdCancellationResponseHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdCancellationNotificationHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
          <element name="cancellationReason" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdStatusQueryHdr">
        <sequence>
          <element name="customerHold" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="holdStatusResponseHdr">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
        </sequence>
      </complexType>
      
      
      
      
      
      <complexType name="statusStructure">
        <sequence>
          <element name="itemHeader" type="holdSchema:holdHeader"/>
          <element name="holdState" type="string"/>
        </sequence>
      </complexType>
      
      
      
      
      
      
      <complexType name="holdStatusResponseBody">
        <sequence>
          <element name="holdItemsCount" type="int"/>
          <element name="itemList" type="holdSchema:statusStructure" minOccurs="0" maxOccurs="unbounded"/>
        </sequence>
      </complexType>
      
      
      
      
      
      
      <complexType name="holdError">
        <sequence>
          <element name="baseHeader" type="holdSchema:holdHeader"/>
          <element name="holdErrorType" type="int"/>
          <element name="holdErrorDesc" type="string"/>
        </sequence>
      </complexType>
      
      <element name="userDefinedBody" type="holdSchema:userDefinedBody"/>
      <element name="holdRequestHdr" type="holdSchema:holdRequestHdr"/>
      <element name="holdRequestAckHdr" type="holdSchema:holdRequestAckHdr"/>
      <element name="holdGrantHdr" type="holdSchema:holdGrantHdr"/>
      <element name="holdDenialHdr" type="holdSchema:holdDenialHdr"/>
      <element name="holdModifyRequestHdr" type="holdSchema:holdModifyRequestHdr"/>
      <element name="holdModifyGrantHdr" type="holdSchema:holdModifyGrantHdr"/>
      <element name="holdModifyDenialHdr" type="holdSchema:holdModifyDenialHdr"/>
      <element name="holdModifyResponseChoiceHdr" type="holdSchema:holdModifyResponseChoiceHdr"/>
      <element name="holdCancellationRequestHdr" type="holdSchema:holdCancellationRequestHdr"/>
      <element name="holdCancellationResponseHdr" type="holdSchema:holdCancellationResponseHdr"/>
      <element name="holdCancellationNotificationHdr" type="holdSchema:holdCancellationNotificationHdr"/>
      <element name="holdStatusQueryHdr" type="holdSchema:holdStatusQueryHdr"/>
      <element name="holdStatusResponseHdr" type="holdSchema:holdStatusResponseHdr"/>
      <element name="holdStatusResponseBody" type="holdSchema:holdStatusResponseBody"/>
      <element name="holdError" type="holdSchema:holdError"/>
    </schema>
</types>
<message name="HoldRequest">
    <part name="headerHoldRequest" element="holdSchema:holdRequestHdr"/>
    <part name="bodyHoldRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldRequestAck">
    <part name="headerHoldRequestAck" element="holdSchema:holdRequestAckHdr"/>
    <part name="bodyHoldRequestAck" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldGrantResponse">
    <part name="headerHoldGrantResponse" element="holdSchema:holdGrantHdr"/>
    <part name="bodyHoldGrantResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldDenialResponse">
    <part name="headerHoldDenialResponse" element="holdSchema:holdDenialHdr"/>
    <part name="bodyHoldDenialResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldModifyRequest">
    <part name="headerHoldModifyRequest" element="holdSchema:holdModifyRequestHdr"/>
    <part name="bodyHoldModifyRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldModifyResponse">
    <part name="headerHoldModifyResponse" element="holdSchema:holdModifyResponseChoiceHdr"/>
    <part name="bodyHoldModifyResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationRequest">
    <part name="headerHoldCancellationRequest" element="holdSchema:holdCancellationRequestHdr"/>
    <part name="bodyHoldCancellationRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationResponse">
    <part name="headerHoldCancellationResponse" element="holdSchema:holdCancellationResponseHdr"/>
    <part name="bodyHoldCancellationResponse" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldCancellationNotification">
    <part name="header" element="holdSchema:holdCancellationNotificationHdr"/>
    <part name="body" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldStatusQueryRequest">
    <part name="headerHoldStatusQueryRequest" element="holdSchema:holdStatusQueryHdr"/>
    <part name="bodyHoldStatusQueryRequest" element="holdSchema:userDefinedBody"/>
</message>
<message name="HoldStatusResponse">
    <part name="headerHoldStatusResponse" element="holdSchema:holdStatusResponseHdr"/>
    <part name="bodyHoldStatusResponse" element="holdSchema:holdStatusResponseBody"/>
</message>
<message name="HoldErrorResponse">
    
    <part name="bodyHoldErrorResponse" element="holdSchema:holdError"/>
</message>
<portType name="TentativeHoldServicePortType">
    <operation name="InitiateHold">
      <input message="tns:HoldRequest"/>
      <output message="tns:HoldRequestAck"/>
      
    </operation>
    <operation name="InitiateHoldModify">
      <input message="tns:HoldModifyRequest"/>
      <output message="tns:HoldModifyResponse"/>
      
    </operation>
    <operation name="InitiateHoldCancellation">
      <input message="tns:HoldCancellationRequest"/>
      <output message="tns:HoldCancellationResponse"/>
      
    </operation>
    <operation name="InitiateStatusQuery">
      <input message="tns:HoldStatusQueryRequest"/>
      <output message="tns:HoldStatusResponse"/>
      
    </operation>
</portType>
<portType name="TentativeHoldNotificationServicePortType">
    <operation name="NotifyHoldGranted">
      <output message="tns:HoldGrantResponse"/>
    </operation>
    <operation name="NotifyHoldDenied">
      <output message="tns:HoldDenialResponse"/>
    </operation>
    <operation name="NotifyServerHoldCancellation">
      <output message="tns:HoldCancellationNotification"/>
    </operation>
</portType>
<binding name="TentativeHoldSoapBinding" type="tns:TentativeHoldServicePortType">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
      <operation name="InitiateHold">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHold"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
      <operation name="InitiateHoldModify">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHoldModify"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
      <operation name="InitiateHoldCancellation">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateHoldCancellation"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
      <operation name="InitiateStatusQuery">
        <soap:operation soapAction="http://www.w3.org/2001/08/thp/InitiateStatusQuery"/>
        <input>
          <soap:body use="literal"/>
        </input>
        <output>
          <soap:body use="literal"/>
        </output>
        
      </operation>
</binding>
<service name="TentativeHoldService">
    <documentation> Mythical Tentative Hold Web service</documentation>
    <port name="TentativeHoldPort" binding="tns:TentativeHoldSoapBinding">
      <soap:address location="http://xyz.com/tentativeHold/"/>
    </port>
</service>
<service name="TentativeHoldNotificationService">
    <port name="NotificationPort" binding="tns:TentativeHoldSoapBinding">
      <soap:address location="http://xyz.com/tentativeHoldNotification"/>
    </port>
</service>
</definitions>

Machine Authentication not happening with MAR

ACS(SE)4.2
WLC (4402)5.1.163
AD 2003 Server
Currently we are using ACS to authenticate VPN user for two domain.In the same ACS we want to configure machine authentication + PEAP + Self Signed Certificate.Now clients are authenticated with a valid username and password in any of the domain but machine authentication is not happening.
Our Requirement :we want to acheive machine authentication and user authentication simultaneously. i.e. Computers which are added to particular group with a valid username and password can only access the network.If any one of above requirement is not fulfill then end host cannot access the network.
Can anyone suggest what configuration required to acheive our requirement?
Note: We are using same ACS for VPN authentication.

Currently we are using WindowXP SP3.
Client Configuration:
1. network Authentication: WPA + TKIP
2. EAP type: Protected EAP(PEAP)
3. Authenticate as computer when computer information is available is (checked)
4. Validated server certificate is (unchecked)
5. Authentication Method is: EAP- MSCHAPv2
ACS External Database Configuration:
Tick "Enable PEAP machine authentication".
Tick "Enable Machine Access Restrictions".
Ensure that "Group map for successful user authentication without machine authentication:" is mapped to "No Access".
We are using Windows AD database as external database.
Currently we have created one wireless group in AD which is mapped to a group in ACS and the ACS group is mapped to the SSID in WLC. We are trying to authenticate the computer which are added to the Wireless AD group. But currently all users which are there in the AD are authenticate by their Username/password instead of machine authentication ( computer which are present in the group).
In WLC, client details showing domain\username instead of host/computer name.
Your quick response would be highly appreciated!!!!!!

When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

I have added a website as safe for popups.when I select an item it takes me to a page that says I have been logged out. does not happen with other browsers

I have selected my website as safe. While on the site I fill out a form, then when going to the next page to view results, Firefox says I've been logged out. I hit the back button and go back to the form fill in page. It will not take me to the page of results. This does not happen in other browsers.
This also happens with other websites.

Hi,
You can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''.
(To revert to the previous profile, close the new profile, start Firefox and choose the '''*.default''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers)).
[https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]

I can no longer open my Comcast email when I launch from Firefox - it takes me to the email preview page but will not allow me to open the inbox . Does not happen with Internet Explorer.

This started last month - when I go to my comcast account, I'm able to log on and view my account but can not open my email inbox. When I enter my user name and password, I'm taken to the "Email Preview" page so that I can see a partial view of the inbox but when I click on "View Entire Inbox" it jumps to a page showing that it's loading but goes right back to the preview page - I can't open any of the emails. This does not happen when I use Internet Explorer or Firefox on my older laptop.

Did you find out what addon?

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" GETS OPENED.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECCT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???

Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???

Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972

Validations not happening

Similar Messages

Maybe you are looking for