Validators don't block submit. Bug?

JDev 11gR1
The following documentation describes how to write custom validation logic in a managed bean.
http://download.oracle.com/docs/cd/E15051_01/web.1111/b31973/af_validate.htm#BABEIIDD
However when used in a dialog in combination with non-dialog standard outcomes, validators are ignored
(when you use a custom commandlink or button for example) .
Testcase download
Run the testcase, click on "open popup".. type anything else than "ok" inside the text field.
Press the standard "OK" button. The popup will not hide&submit since the validator was fired.
Press cancel. Reload the page.
Click on "open popup", .. type anything else than "ok" inside the text field.
Press the "Custom cLink" hyperlink. The validator is ignored.
EDIT : The testcase in words :
I have a dialog inside a popup with a commandlink inside the dialog. There is also an inputtext inside the dialog.
When using the standard ok & cancel buttons of the dialog, my custom validator (for the inputtext) blocks the popup/dialog from submitting.
When using the commandlink it will submit even if the validator says it shouldn't..
Edited by: [email protected] on 8-dec-2009 2:24
Edited by: [email protected] on 8-dec-2009 2:27

When inside a popup any full submit of page it make popup hide (no mater validators or not)
You need to put partialSubmit=true to your Custom cLink and partial trigger on input text to the clink
then the validation will be fired when you click on custom clink

Similar Messages

Where to submit bugs?

Where's the right place to submit bugs for Server.app? The feedback page I go to for most Apple stuff doesn't seem to recognize any server since 10.6...

http://www.apple.com/feedback/server.html
Updating the server version list hasn't proven to be Apple's strongest side, but I guess it doesn't matter anyway. I don't select anything when submitting there.

How to submit bugs for FlexCPD?

Hello,
Where should I submit bugs related to FlexCPD?
Should we use the FlexPMD project in JIRA and if so then which component?
The problem I have is that when FlexCPD detects similar snippets in MXML files it reports wrong lines. I have several such reports and all the reported pair of snippets have nothing in common that's why I guess the line numbers are wrongly calculated. For .as files it works ok.
Thanks

There is a CPD component in the FlexPMD project. Please use this one.
Thanks
Xavier

ImportData error blocking submit

We are using the ImportData component to push revised XML back into a pdf (document form) that contains multiple digital signatures. The new data in the xml is showing up in the pdf when the form moves to the next user in the workflow, however, once there, the form is no longer able to be submitted. The submit button (using workspace) is visible, but nothing happens when it is clicked. It is also triggering a validation error on a phone number field that is blank when the submit button is clicked, but when the phone number is entered (or already exists), it still fails to submit.
System is running LC with SP3 on Windows 2008
This is the error that was showing up in the log:
2009-11-10 14:14:15,977 WARN [com.adobe.idp.common.errors.exception.IDPLoggedException] UserM:GENERIC_WARNING: [Thread Hashcode: 438313862] | [AuthenticationManagerBean] errorCode:12809 errorCodeHEX:0x3209 message:AssertionId [38C68A3A-FCC0-601D-ED57-BDACFE2094E3] is not valid. This may be due to sso session corresponding to the passed id has expired
2009-11-10 14:14:30,965 INFO [com.adobe.livecycle.formdataintegration.server.FormData] ALC-FDI-001-307: Processing importData operation on source document 1411372404.
2009-11-10 14:19:12,599 INFO [com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl] ServiceRegistryImpl:stop(PR, 1.6)
2009-11-10 14:20:00,036 ERROR [org.jboss.ejb.plugins.LogInterceptor] EJBException in method: public abstract java.util.ArrayList com.adobe.edc.server.businesslogic.license.LicenseManager.findAllPrincipalKeys(com.adobe. edc.server.businessobject.EDCContext,java.util.Date) throws com.adobe.edc.server.errors.exception.EDCServerSystemException:
com.adobe.idp.common.errors.exception.IDPSystemExceptionorigin: | [com.adobe.idp.storeprovider.jdbc.DBStatement] errorCode:12290 errorCodeHEX:0x3002 message:execute query failure(select top 1000 * from EDCPRINCIPALKEYENTITY where EDCPRINCIPALKEYENTITY.lastRollover < ?) chainedException:com.microsoft.sqlserver.jdbc.SQLServerException: The connection is closed.chainedExceptionMessage:The connection is closed. chainedException trace:com.microsoft.sqlserver.jdbc.SQLServerException: The connection is closed.
Any ideas?

Hi Richard,
I am having the same error message you mentioned below
u201CError Blocking in Purchase order in backed. Contact the system Admin.u201D
As you suggested, I would like to try to delete the entry in table BBP_DOCUMENT_TAB However I don´t have authorization to do it. How can I do it?

Submit Bug?

Doesn't seem to be any easy place to just submit a bug report, so I thought I would just post it here thinking a moderator would submit it for me. I found an unusual flaw while working with images in Illustrator. Wondering if everyone else sees the same as I do. If you follow these steps exactly, you should see what we see.
1) Create an image file (RGB, CMYK or Grayscale, doesn't matter), and save it (PSD or TIFF, doesn't matter).
2) Create a new CMYK or RGB document in Illustrator CS5.
3) On the default layer (normally called "Layer 1"), "Place" the image you created as a "Link".
4) Create a shape and apply it as a clipping mask to the linked image.
5) Create a new layer (by default it's called "Layer 2").
6) In a different location, "Place" the image you created as a "Link" again.
7) Make another shape and apply it as a clipping mask to the second linked image.
8) Save the file as an AI or Illustrator compatible PDF (doesn't matter).
9) Close the file and reopen it in Illustrator. You'll notice that the artwork appears to be what you created.
10) This time, lock the bottom layer, which should be called "Layer 1".
11) Save the Illustrator file, and close it.
12) Reopen the file and look at your images now. You'll notice in the "Links" window that there's more images than you originally placed, and at least one of the images is in the wrong location. You will probably see three images when you had only placed two, and one of the images has a white preview in the "Links" window.
*This is the main flaw of the program. It only happens when the same image is placed on two different layers and only when the bottom layer is locked.
**After step 12, if you unlock "Layer 1" and save/close the file, the next time you open it, the images appear normal again. However, it still leaves an extra image in one of the clipping mask, which you can identify from the "Links" window.
***When saving the file as Illustrator PDF and this problem occurs, the document appears accurate when opened in Acrobat, even though it is not correct in Illustrator.
Give it a try and let me know if I'm crazy here! Must fix this problem!!!! Thanks all!

Hopefully you can see from these screenshots.
Here is the normal AI file with the links on two separate layers and the layers both unlocked.
This is what happens when we lock the bottom layer, save and close the file, and then reopen the file.
We are using MAC version, and it occurs on both of our MAC's, two different OS. We do run Esko Plugins, so if you don't see the same thing we are, I will be submitting a support ticket with them next. I really appreciate any other confirmations. Thanks much!
I have this sample file, the image file, and a PDF of my screenshots in a ZIP file which can be downloaded HERE. Just open the AI file, lock the bottom layer, save and close, then reopen the AI file.

Where can we submit bug reports?

I'm unable to submit a bug report re: Lightroom's export resizing, because following the trail at feedback.photoshop.com leads you to sign in with your Adobe ID before you can submit the report but when I sign in, the page just says photoshop.com accounts can no longer be created. So, that website failure aside, the text of bug report I was trying to submit:
Lightroom 5's export isn't resizing exactly to specified long edge. For example, when I restrict long edge to 1920, the exported files are 1919. Same with 1024, I get 1023px files instead. If I export from Adobe Bridge, then the long edges are calculated correctly. This problem didn't happen with LR4. Files being exported were DNG and TIF.

Thanks Rob. I tried with both FF and Chrome, and didn't have cookies blocked, still no joy on that front. I already have an Adobe ID (signed in at adobe.com and in creative cloud) but I'll try again at the photoshop.com forums in a few days.
Didn't think about the original dimensions thing.. perhaps that might be it:
If I create a 4000px wide tif in photoshop, import it to LR5, then export to 1920 it outputs a 1920px file. If the source file is a DNG (or TIF after editing in PS) from my D800 (7360 x 4912 uncropped), then LR5 on export outputs a 1919px file instead of 1920. I also created a new file in PS with 7360x4912 dimensions, and after importing that into LR5, I get the same off-by-1 export resizing.
Doesn't seem to matter if the image is cropped (within LR5), if the source file's original dimensions are 7360x4912 (at least on my Win7 PC), LR5 outputs 1919px. If I create a 7380x4912 image, then LR5 resizes to 1920px correctly.
For now I'll just have to go through the extra step of exporting from Bridge, but hopefully someone at Adobe's LR team sees this thread and is able to reproduce & fix this bug.

Submit bug report

I'd like to submit a possible bug.
Bug: App Store doesn't close and the screen doesn't turn off after updating apps
I used App Store to update my apps remotely before bedtime. This morning, all the apps have been updated, but my iPad's screen was still on, and the battery power was 50%, from being almost fully charged the night before.

You can do so here. Under Feedback Type, select Bug Report.
http://www.apple.com/feedback/ipad.html
Just a thought, you should probably plug your iPad into a power source if you going to rely on Apple's automatic updates, backups, syncing, etc. Actually you do have to plug into power if you auto backup with iCloud and sync with iTunes. In any event, it's just a good idea to plug into power if the iPad is "functioning" while you are away from the device.
Its one thing to just let the iPad sleep at night and not plug it in, but if you want to update, backup, etc, you should plug into power. Just my opinion ...
I recharge my iPad every single night and I fail to understand why others don't do the same.

Who supports the Z3v? How to submit bug reports?

I love my Z3v, but I've encountered some significant bugs with the firmware and the software. What is the best way to submit a bug report and/or feature request?
For that matter, who officially supports the phone? I tried reporting a firmware bug to Verizon and they directed me to the manufacturer of the phone (Sony). I then tried to get support through Sony and the support rep claimed that, because the Z3v is a Verizon-specific model, only Verizon could support me.
Solved!
Go to Solution.

I'd say Verizon as it is them who would have modified the firmware and then given that to Sony for release - When it comes to network specific models and firmware then they are your 1st port of contact - but this is just my opinion based on what happens here in the UK however some features are generic in all models like the Walkman and Album apps etc
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Why can't we submit bug reports for Flash Pro?

I've been looking to submit some bug reports regarding CS5.5 Pro and there just isn't an option in the "Report a Bug/Feature Request" form. WHY not?? I paid for CS5.5 and autoformat breaks my code, but there's no way to report it.

You aren't the first to have a problem with the choices provided. It would be nice if they listed "Flash Pro" uniquely in the list of options at...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
... since they dio for the rest of the Adobe products. But you should feel free to pick any one of them. I'd choose "Flash Authoring" since I've no idea what it is other than maybe something to do with Flash Pro.

Be able to submit bug reports via LittleBigPlanet 2.

We all know that there's so many bugs and glitches out there in LittleBigPlanet 2, so how about an option to submit a bug report directly from the game? Who's with me?

Tom Gewecke wrote:
You'd be surprised.
With pleasure!
Try it with bugreport.apple.com. Need to be a registered ADC Member, but that frees. Be sure to pick a bug that is reproducible with a simple step by step recipe on the most current software.
So what is this bug you have been talking about?
Recurring complaint of mine:
March 2006 [If the RSS feeds contained pubDate and author that would be great!|http://discussions.apple.com/message.jspa?messageID=1892109#1892109]
April 2008 [better rss feeds without jf namespace prefix|http://discussions.apple.com/thread.jspa?threadID=1468264&tstart=189]
The RSS feeds are almost useful. They actually include the author and create date information, but do so in a format that neither safari or any other garden variety RSS reader handles.
Jive's own documentation on the subject [Jive Community: Content Syndication via RSS|http://www.jivesoftware.com/community/docs/DOC-1022] recommends reformatting the output to suit the needs of your audience in the section titled "*Displaying RSS (or, actually doing something with this stuff)*".
It seems the jf: prefixed tags aren't meant to be pushed out to the RSS clients. I certainly haven't found a RSS reader that deals with them correctly or lets you workaround them. So although the feeds have a creation date, modification date, author, and reply count, none of that information can be seen in a garden variety RSS reader. This is particularly a problem for the create date, since the create date of each article is replaced with the pub date of the feed. The pub date of the feed is the time when you pull it down, and that changes each time the feed is refreshed.
Anyway ... it seems to me that it would be a small and correct change that would take the existing RSS offerings that last inch into the realm of useful. Maybe I'll be surprised.

How submit bug reports?

I have a query which runs under Oracle 9i and disappears into the void under Oracle 10g (Windows OS). I suppose I can't call it a bug because I don't know if Oracle 10g simply supports a different SQL or the optimizer is very different.
I can supply the data and query to demonstrate it (it's a 306K zip file).
Is there any interest by Oracle in such examples?

In the past, when have encountered a problem, or mysterious unexplained behaviour, I have raised a call on Metalink. The analysts there may or may not decide it is a bug.
I do not know how to report a bug directly.
You could try going through the 'whats new' in 10g manual to see if any of that applies to your SQL.
If you have changed database, it is possible that your statistics are out of date, and that the optimizer is not able to make good explain plans. Oh, if I recall correctly, the Rule based optimiser is officially not supported in 10g - that could be it.
I hope my ramblings are of some use.
Takmeister

Is there a place to submit bug reports for iTunes 11?

I was wondering if anyone knows of any communities, or ways in which we can submit errors, or bug reports for the new version of iTunes, version 11.0? The 2 issues so far that I am seeing, is:
1. My account information: iTunes shows I have hidden purchases, when on all my iDevices, I have 0. (In fact, before the update, I un-hid all previously hidden purchases, and it showed correctly).
2. When syncing a device, on the last tab for items on device, on my iPhone 4, iOS 6.0.1, it shows I have 2 songs downloaded from my collection, when I know I have 0. (Verified by checking Settings>General>About>Songs = 0

Yes,
In iTunes;
Help (pulldown)
"Provide iTunes Feedback"
However, as of this writing iTunes 11 isn't listed in the 'Version list, so make sure that you state the version in your description.
-Alan
ps. If you dont see the Help pull-downmenu, press 'Alt' to toggle it.

Files go missing, but they don't.. Bug??

Hey all.
(LR 2.2, Leopard latest version.)
This has happened a few times now but I'm afraid I can't pinpoint what causes it. I was wondering if this has happened to anyone else?
I will go to a folder and turn off all search filters and expand all stacks.
The list near in the filmstrip states (for example)...
"64 of 69 photos"
There is no reason for the file(s) to be hidden. They are there in the folder (viewable in finder), and the only way to fix it is to save xmp's to retain my changes. Then remove and re import the folder (sync folder doesn't have an effect).
LR is definitely registering the file as forcing a reimport of the .NEF gives an "already exists" error.
The only clue I can give to cause is I *think* it only happened in folders with stacks (all of which as I said were expanded) and perhaps in folders I moved images from folder to folder (within lightroom).
Perhaps it is when I move the .tif and the .nef it is stacked too at the same time etc.... but it seems to pick files at random.
There's every chance I am missing something, but I don't think so.
Any help appreciated. I have logged the bug with Adobe.
Thanks!

Are the missing files visible in the Grid View? That is, if it says "64 of 69 photos", do you actually count 69 (or 64) of them in the grid?
If you only find 64 there, then you'll have a handle on what's going on because you'll know what files aren't showing up. If you find all 69, you have a good right to feel mystified. :)
Hal

Safari don't block cookies / security issue?

Hi,
after updating to Lion I noticed a security issue on Safari: 'Block cookies = Always' don't prevent storing of cookies.
Can anyone confirm this?
Thanks.

This security hole seems to be a problem for many users:
- Never accept cookies button does not work I am still receiving all cookies
- I have safari 5.05 i always use safari with the cookies set to never except. i see that safari 5.05 keep excepting cookies when i have cookies set to never except. any one has same problem? is it normal for safari to do that? i don't think so.
- Clicking to never accept cookies does not work.
Please, try to fix it.

APEX 3.1.2 javaScript:doSubmit don't able navigate BUG

Hi everybody,
We're working with APEX 3.1.2.
We're not able to navigate from page to page with the Thumbnails.
It seems that the javaScript:doSubmit doesn't execute.
In our example we want to go from 'Généralités' page to 'Paramètres' page:
javaScript:doSubmit('T_PARAMÈTRE');
Can you help me ?
Thanks & Regards.
Eric.

HI everybody,
I apologize, when I say ``Thumbnail`` it means ``Tabs``.
Anybody had never get this bug yet ?
Thanks & Regards.
Eric.

Validators don't block submit. Bug?

Similar Messages

Maybe you are looking for