Valuation of special Stock

Hi Friends,
Can anyone explain briefly about the sales order stock valuated by the moving average and standard price .  How the system response for these prices ?  difference specially for sales order stock
Thanks & Regards,
Renuga.A

Hi,
Price control depends S or V on ur bussiness requirement but you can go for V.For more check the links:
http://help.sap.com/saphelp_470/helpdata/en/90/ba6cba446711d189420000e829fbbd/content.htm
http://help.sap.com/saphelp_470/helpdata/en/90/ba6cc7446711d189420000e829fbbd/content.htm
Regards,
Biju K

Similar Messages

  • About stocktype, stockcat, Indicator: Valuation of Special Stock

    Hello Gurus,
            please show me where can I get values and values' meaning for stocktype, stockcat, Indicator: Valuation of Special Stock?
    Many thanks,
    Frank

    HI
    data comes from related data  0FRE_STKEXC data source; 0FRE_ANA_STCKEXC_1... InfoCube: 0FRE_C04 / 0FRE_C24
    0FRE_C04 retrieves the F&R relevant master data from InfoObject 0MAT_PLANT.
    0FRE_C24 (new as of release 7.0.3) is similar to 0FRE_C04, but uses DSO (DataStore Object) 0RT_DS01 instead of 0MAT_PLANT to retrieve the following F&R relevant master data:
    hope it helpfull...
    thx vijju

  • Fill field Valuation of Special Stock (EKPO-KZBWS) BAPI_CONTRACT_CREATE

    Can any body help with this, I need to fill the field Valuation of Special Stock (EKPO-KZBWS) in the BAPI_CONTRACT_CREATE.

    OK

  • Special stock valuation

    Dear Experts,
    Can any one tell me whre we will do project stock valuation .
    and how the table QBEW-LBWST will get updated
    Thanks
    Bhaskar

    Dear Bhaskar,
    Materials with project stock and standard price price control are valuated as per the following strategy is HARDCODED in the system:
    1. looks into QBEW if any GR/IR has already taken place.
    2. runs user Exit COPCP002 / EXIT_SAPLCK36_001 which is designed
       exclusively for valuated sales order stock.
    3. looks for a marked sales order cost estimate.
    4. looks for planned costs of a production order (preliminary costing).
    5. CU50 if configurable material (only for project stock)
    6. standard price from MBEW (standard cost estimate)
    The first time a goods movement is carried out the system will go through this strategies until it can find a valid price, and then will write an entry in QBEW. The successful strategy number is also written to field LBWST. From then on, the price from these tables will be used for valuating the special stock in every other goods movement.
    You can find this part of the coding in Function Module CK36_STANDARD_PRICE_GET > Form PRICE_STRATEGY_NEW.
    Note 520000 which provides more information about this logic.
    Best Regards,
    Antje

  • Infrastructure for special stock data

    DeDear Experts,
    Is there any infrastructure for stock detail where special stock data is available like sales order stock and project stock.
    Free stock is available in S032 info structure, I want the same for special stock.
    Please suggest me in this regards as I need to develop the stock report in alternative unit of measure.
    Regards,
    vgl.

    As per OSS note 581240 only certain special stocks are updated in info structures S031-S039:
    The following special stocks are always updated:
    Special stock 'O': Stock of material provided to vendor
    Special stock 'W': Consignment stock at customer
    Special stock 'V': Returnable packaging stock at customer
    The following are never updated:
    Special Stock 'K': Vendor consignment stock
    Special stock 'M': Returnable transport packaging
    The following stocks are updated DEPENDING ON YOUR VALUATION TYPE (Special Stock Valuation indicator):
    Special stock 'E': Sales order stock
    Special stock 'Q': Project stock

  • Report by month with Valuated stock and special stock by storage location

    Dear All,
    I need a report similar to MCBE with stock level (including "storage loc/batch Stock" plus "special stock(Q)") by plant and storage location.
    I try it with MCBE tcode, but i only get  "storage loc/batch Stock" in column named valuated stock. Also I can obtain that information in MB5B tcode, but I cannot get data by storage location, only plant.
    Does anyone know how can solve it?
    Thanks in advance,
    Sebastiá

    Hi,
    Use MC.9 T.code.
    click on "switch drilldown" and select storage location.
    Regards
    Hari

  • Special stock T for valuated SIT

    Hi Experts
    The valuated SIT is referred with special stock indicstor T.
    But i am unable see the special stock indicator in MB52 as like consignment stock/subcontractor stock.
    Please give any clue.
    thanks
    ramSiva

    Hello,
    you can also see special stock T in MMBE. It´s necessary to add field KASIT to one of the Display version (you can customize it in path Material management --> Inventory Management --> Reporting --> Define Stock List Display --> Rules for display of stock balances).
    You can see final result in attached screen shot.
    To resume. You can analyze T special stock in:
    MBBS
    MB5SIT
    MMBE (customizing Display version with new stock type).
    Best regards.

  • How to valuate special stock E

    Dear all,
    we don't use production.
    We create a sales order for a ROH material and then we create a purchase order with account category assignment M.
    When we post the good receipt an FI document is created (Raw material Purchasing  vs Invoice receivable) but the system updates the special stock E only with quantity, the value is zero, so no FI posting for stock account.
    We tried to put the sales order valuation class ROH in the material master but nothing changed.

    Hi,
    the following note seems to be applicable to your problem:
    [ Note 983193 - Docu:Externally procurd material in valtd sales order stock|https://service.sap.com/sap/support/notes/983193]
    To be able to valuate the goods receipt for the net purchase order price , use the COPCP002 user exit. In this case, you can use any price even the corresponding net purchase order price.
    best regards,   Udo

  • T-code for getting consumptions / usage on special stock Q materials?

    Hi,
    I am facing an issue: special stock Q is not included in all T-codes that I know for getting the consumptions / usage over a period.
    --> MC.9, MCBE etc.. are all not showing any results for those kind of materials.
    I found the explanation: it's depending on special stock valuation indicator (Blank, A or M), and only A permits to see the consumptions with MCxx T-codes, which is not the one used in the plant I'm currently working in (M)
    Since this valuation indicator is a FICO defined parameter, I cannot make it changed to be able to check those materials usage.
    Anyone has a tip or know a way to get usage on special stock Q materials?
    Thanks for any help!

    Hi Sanil Bhandari,
    Thanks for trying to help.
    Unfortunately MMBE is a snapshot of stock level and reservations by storage location on a single material, and does not display the consumption over a predefined period.
    I am still looking for any solution that works with special stock Q materials.

  • PO against valuated sales order stock posting to consumption account

    Hi All,
    I am creating a PO with account assignment against valuated sales order stock. However the posting happens to consumption account (GBB) instead of the stock account (BSX). The following settings exist
    1. The material type is both quantity and value update
    2. The account assignment category used in PO is E which has special stock = E, account modifier = VKA and consumption posting = E
    3. The requirement class (in SD) has account assignment = E and valuation = M (even tried with A)
    4. The valuation class for valuated SO stock has been maintained in the accounting view
    However the system picks up the account corresponding to GBB-VKA and not BSX. Can anyone point out any setting that may be mising here.
    Regards,
    Ketan

    Hi,
      Maintain the consumption posting as blank against the account assignment used in PO in OME9 and test the scenario again.
    Regards,
    AKPT

  • Cost of Inventory for Special Stock- (Sales Order Stock)

    Dear All,
    We manufactures "x" materail under Make to Stock and Make to Order Scenarios. We carried the standard cost estimate through CK11N and released through CK24N. There is a value of "X". Also we carried the sales order cost estimate that is value "Y". But we have observed the inventory value updated during confirmation of the production is at "Z" value. We have identified this Z value is the value of special stock previous periods.
    I would like to know the procedure of valuation of inventory under scenarios
    Regards
    Anilkumar

    Hi,
    thanks for your info.
    Can i say the changes will be done for those special stock.?
    Actually my problem is related to a Return Sales order process where we need to change the MAP before DO and GI, otherwise the Material document would not capture the correct MAP during GI.
    and the solution from the senior is select the variance "special stock -Sales order" and enter the sales doc# in MR21.
    The problem that we are not yet having any special stock for this return Sales order, but this MR21 works for us and after that, the material document is able to capture the correct MAP.
    Any idea what or where the MR21 is updating for the "Special Stock-Sales order" if we don't have any Sales order stock for the paticular sales document?

  • MC.9 and Valuated Sales Order Stock

    Hello Everyone!   Just wondering if there has been a SAP advancement that allows for special stock valuation 'M' within the stock status reporting. (MC.9) We have a business application for this specific configuration and are familiar with OSS note: 581240.  We would be most appreciative of any update you can offer.  Thank you.

    Hi,
    No only stock valuated with A is updated in info structures. There has been no change in this design up until now.
    Hope this helps.
    Regards,
    Rajesh.

  • Valuated Sales Order stock for Semi-Finished Products

    Dear Gurus,
    One of my client faced the issue that the semi-finished products is valuated-sales order.  We are in Mill Industries, downstream (steel processing).  The situation is:
    1.  We use configuration material for both finished and semi-finished products. Both are valuated at standard costs with valuated sales order stock.
    2.  Once the sales order is created, the cost estimates are created for both Finished, and semi-finished products.
    3.  The production orders is created for the semi-finished products.  During production, several semi-fg and fg can be manufactured at the same time.   We are using the co-products feature to cover that.
    4.  During the goods receipt of semi-finished products, instead of using the standard costs in sales order cost estimate, it use the planned costs in production orders which against our design.
    I tried to use the user exit COPC002 and influence the standard costs.  But it seems that the routine is not called for semi-fg at all.  Anyone has any light on this?
    Regards,

    Hi
    I think you are talking about Special Stock "E"...ie) Sale Order Stock...
    If my understanding is correct then,
    If you go and see the Table T156....For the
    Movement Type: 101,
    Special stock Indicator : E,
    Qty. Updation Checked,
    Val. Updation Checked,
    Movement Indicator : Against PO,
    Consumption Indicator: Sales Order Stock.....combination....the transaction Event Key....GBB only has been Assigned....these  settings you cannot change...
    This linkage you can view in OLMW-----> Account Determination -
    > Acc. Determination W/O Wizard -
    >Account Grouping....also
    Reward if useful
    Regards
    S.Baskaran
    Edited by: baskaran srinivasan on Dec 20, 2007 12:18 PM

  • Valuated sales order stock for configured material

    Hi All!
    I have a small problem   : I created a new type of material (OMS2) - a configurable one, managed on quantity and value basis. I work with valuated sales order stock for configurable materials but the account in the purchase requisition is determined by means of event key GBB insted of event key BSX.
    Where is my error?
    Any idea would be appreciated.
    Florina C

    Hi
    I think you are talking about Special Stock "E"...ie) Sale Order Stock...
    If my understanding is correct then,
    If you go and see the Table T156....For the
    Movement Type: 101,
    Special stock Indicator : E,
    Qty. Updation Checked,
    Val. Updation Checked,
    Movement Indicator : Against PO,
    Consumption Indicator: Sales Order Stock.....combination....the transaction Event Key....GBB only has been Assigned....these  settings you cannot change...
    This linkage you can view in OLMW-----> Account Determination -
    > Acc. Determination W/O Wizard -
    >Account Grouping....also
    Reward if useful
    Regards
    S.Baskaran
    Edited by: baskaran srinivasan on Dec 20, 2007 12:18 PM

  • ECC ehp4 A&D Subcontracting in combination with valuated sales order stock

    Hello Experts,
    a customer's Equipment (serialized material) is received in a valuated sales order stock (special stock E) and must be delivered to a third party service provider in subcontracting, with relevant spare parts (special stock O). The proces is originated in the Customer Service module where a "Returns and Repair" scenario supports the material return (inbound delivery) from Sales order type RAS Repairs / Service, on the plant, in a valuated sales order stock. Based on a repair procedure a Service order is created from the Repair order to track repair activities which are mainly executed at the workshop (planning plant). Our customer needs to deliver the component to an external service provider. Service order and Repair order have both a PS WBS account assignment.
    Tracking of vendor's stocks levels with related deliveries and outputs is a must for the customer. Main Equipment to be repaired is stored in the sales order stock A. Components are stored in a different plant, in (valuated) project stock.
    We activated the relevant business functions for Maintenance and Service processing in the Aerospace & Defense industry (MRO) including LOG_EAM_ROTSUB, A&D Maintenance, Repair and Overhaul AD_MRO_CI_1, Material Exchange with ATP Check AD_MRO_CI_2, Rotables/Sharing of Spare Parts, Subcontracting Improvements AD_MRO_CI_3 with exclusion of LOG_EAM_ROTSUB_2 for which EHP5 would be required.
    The result is an error (AD_SUBCON094) that occurs when you try to create the subcontracting purchase requisition stating "You are using Subcontracting for MRO processes. During maintenance of the purchase requisition item or purchase order item, you set the account assignment to a PM/CS order. If you are additionally using a valuated project or sales order you would have two real accounting objects, therefore this combination of account assignment and special stock is not allowed.
    Choose a different account assignment or a non-valuated special stock."
    I'm also investigating on note 863154 - A&D subcontracting components from special stock. This note states that components must be on the same special stock which seems preventing again the above mentioned scenario. Please advise if you already implemented a similar process and if you have any way to support the same.
    Thanks,
    Stefano

    Stefano,
    Do you have a solution for this?
    Best regards
    Jose Marin

Maybe you are looking for