Value additions in pp module

Hi, pls mention some of the examples for value additions that can be proposed in pp module? also mention if that value additions are the functionlities of the pp module, then can we call them as value additions? pls clarify.

closed as no response recieved

Similar Messages

How to define null or empty value in BAPI function modules?

Hi,
I have problem with BAPI functions, where some parameters are mandatory.
For example: when I try to use HR BAPI's(BAPI_PERSDATA_CHANGE, etc.) I have to insert parameters like SUBTYPE,OBJECTID,LOCKINDICATOR. The PA0002 table that is used from this BAPI doesn't have SUBTYPE, OBJECTID, LOCKINDICATOR, for any of the records that I would like to select.
So what I tried, was to put a ' ', to indicate that is empty. It returned an error message saying "Make an entry in all required fields". Next tried to put in some values for these fields -- and it returned an error message saying "No data selected from 0002 for this period".
I also tried to run BAPI_FAMILY_CHANGE that uses data from table PA0021. Here I found some records with SUBTYPE, OBJECTID fields that were not empty, but LOCKINDICATOR was still missing. So I tried to put LOCINDICATOR value directly in to database (with MS SQL Enterprise Manager). After that I was able to use BAPI_FAMILY_CHANGE.
I think that manually inserting data in database is not normal procedure.
Is there something that I have missed out?
I mean -- how can I get this to work without inserting data directly in database?
How can I define null or empty value in BAPI function modules?
Thank you in advance.
Best regards,
Mihail

Defining an empty value for a parm in a table is easy.
First get the function's definition from the SAP system
Second only populate the fields for which you have a value to set
Third execute the function.
The JCO takes care of the rest.
Enjoy

Getting values from a function module called in a WDA method

Friends,
I am trying to execute a function module from WDA.
I have created a service call for the function module. The function module takes values from the user, looks up the corresponding values of another field and returns the values in an internal table.
I am using the "Method Call in Used Controller" of WD Code wizard to call the function module.
When the event handler method containing the call to the function module is executed, nothing happens.
I am not sure how to pass values to the function module and to get the return values from the function module.
I am new to using function modules from WDA. Please help me out.
Thanks and Regards.

Rashmi,
Is the function module intended to collect input data from the UI and process it? - Yes
If yes, then the input (importing parameter) to the Function Module is a table of values (which should be ideally from the context mapped to the Table UI Element). - The importing parameter is a single value NOT a table and is mapped to the view context.
Now this table UI Element is bound to the view controller context , which in turn is mapped to the component controller context. And you are indeed being able to read the value of this internal table in the component controller method where the function module is being called by means of get_static_attributes_table (Is this right? - Yes, I am able to read the table of values that is passed from the component controller view to form view context by using get_static_attributes_table.
Or are you being able to read it in the event handler method of the view controller and not being able to read it in the component controller method) -
The function module takes a single value as import parameter and returns a table of values as return value.
It works fine when no importing parameter is being used and returns the table of values that is getting passed from component controller context to form view context when i am able to read it using get_static_attributes_table.
Now the question is: how to pass the import parameter value to the function module. I assumed since the importing parameter is a context node (like the return values are), i should set the value ( captured when the user enters the value in the form) to the importing parameter context attribute using set_attribute method. Since it is mapped to the component controller context, i assumed it will get passed and the method will take it as input parameter.
Let me know if my assumptions are correct regarding passing the import parameters and what is missing here.
Thanks and Regards.

How to get sysnr value in a Function Module

Hi all,
I need to get the sysnr(system number) value of the R/3 system. I execute a RFC function module and need to get the value of sysnr of the system it executes in as a return parameter. Can somebody tell me how to get this value in the function module and return it.
Thanks and Regards,
Pratik

Hello Pratik
The system number has to be defined in the RFC destination. Thus, select on your local system (where you call the RFC function module) the corresponding RFC destination from table <b>RFCDES</b>. In field RFCDES-RFCOPTIONS you will find a string like this:
H=<ip address>,S=21,R=N, ...
S=system number
Regards
Uwe

Select options values pass to function module

Hi all,
I want to pass the values entered in the select options to the function module. How should my function module interface be declared for passing the select options
I tried declaring like
t_range type data in the tables tab. But this throws error.
Please let me know how to pass select option values back to function modules.
Thanks,

Hi,
Check this code.
data: node_flights type ref to if_wd_context_node.
data: rt_carrid type ref to data.
data: rt_connid type ref to data.
data: isflight type table of sflight.
data: wsflight type sflight.
field-symbols: <fs_carrid> type table,
<fs_connid> type table.
Retrieve the data from the select option
rt_carrid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CARR_ID' ).
if rs_carrid is not initial. Here you can check that if rs_carrid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_carrid->* to <fs_carrid>.
endif.
Retrieve the data from the select option
rt_connid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CONN_ID' ).
if rt_connid is not initial. Here you can check that if rt_connid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_connid->* to <fs_connid>.
endif.
if <fs_connid> is not initial and <fs_carrid> is not initial.
Retrieve that data from the database. Normally it is suggested to
encapsulate the data retrieval in a separate class.
For simplicity, the SELECT statement has been implemented here.
clear isflight. refresh isflight.
select * into corresponding fields of table isflight from sflight
where carrid in <fs_carrid>
and connid in <fs_connid>.
endif.
Bind the data to the context
node_flights = wd_context->get_child_node( name = `FLIGHTS` ).
node_flights->bind_elements( isflight ).
Hopes this will helps you.
Regard
Manoj Kumar
Edited by: Manoj Kumar on Mar 16, 2009 10:41 AM

Example program for returninng and importing with value addition

HI ,
I want few example programs on how to use the abap oops with returning addition and importing with value addition as Im getting syntax error for the Program when Im declaring them with these additions
Thnaks .

Hello,
This statement declares a general instance method meth. Use additions ABSTRACT and FINAL to make the method abstract or final.
The additions IMPORTING, EXPORTING and CHANGING define the parameter interface of the method. After every addition, the corresponding formal parameters are defined by a specification of the list parameters.
The other additions determine which exceptions the method can propagate or trigger and determine whether the method is abstract or final.
Note
Within a method, you can use the logical expression IS SUPPLIED to check whether an actual parameter was assigned to an optional formal parameter at the call.
Addition 1
... IMPORTING parameters PREFERRED PARAMETER p
Effect
IMPORTING defines input parameters. When calling the method, you need not specify an appropriate actual parameter for every non-optional input parameter. During the call, the content of the actual parameter is passed to the input parameter. The content of the input parameter - for which the reference transfer is defined - cannot be changed in the method.
Use PREFERRED PARAMETER to identify an input parameter p1 p2 ... of list parameters after IMPORTING as a preferred parameter. This specification makes sense only if all input parameters are optional. When calling the method with the syntax
CALL METHOD meth( a ).
the actual parameter a is assigned to the preferred parameter if you have appropriate use of a functional method at an operand position.
Addition 2
... EXPORTING parameters
Effect
EXPORTING defines output parameters. When calling the method, you can specify an appropriate actual parameter for every output parameter. The content of the output parameter - which is defined for value transfer - is passed to the actual parameter at the call after the method has been completed successfully.
Note
An output parameter that is defined for the reference transfer is not initialized when the method is called. Therefore, no read access to it should take place before the first write access.
Addition 3
... CHANGING parameters
Effect
CHANGING defines input/output parameters. When calling the method, you must specify an appropriate actual parameter for every non-optional input/output parameter. The content of the actual parameter is passed to the input/output parameter at the call, and after the method has been completed, the content of the input/output parameter is passed to the actual parameter.
Example
The method read_spfli_into_table of this example has an input and an output parameter, which are typed fully by reference to the ABAP Dictionary.
CLASS flights DEFINITION.
PUBLIC SECTION.
    METHODS read_spfli_into_table
       IMPORTING VALUE(id) TYPE spfli-carrid
       EXPORTING flight_tab TYPE spfli_tab.
ENDCLASS.
Addition 4
... RAISING exc1 exc2 ...
Effect
Use addition RAISING to declare the class-based exceptions exc1 exc2 ... that can be propagated from the method to the caller.
For exc1 exc2 ..., you can specify all exception classes that are visible at this position and are subclasses of CX_STATIC_CHECK or CX_DYNAMIC_CHECK. You must specify the exception classes in ascending order corresponding to their inheritance hierarchy.
Exceptions of the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be declared explicitly, otherwise a propagation results in a violation of the interface. An interface violation results in a treatable exception CX_SY_NO_HANDLER. Exceptions of category CX_NO_CHECK are always implicitly declared.
Notes
The declaration of exceptions of category CX_STATIC_CHECK is checked statically at the syntax check. For exceptions of category CX_DYNAMIC_CHECK, the check is executed at runtime.
In a method in which class-based exceptions are declared with the addition RAISING, you cannot use the statement CATCH SYSTEM-EXCEPTIONS. Instead, handle the relevant treatable exceptions in a TRY control structure.
Example
In class math, you can propagate all exceptions represented by class CX_SY_ARITHMETIC_ERROR and its subclasses from within method divide_1_by. If, for example, the input parameter operand is filled at the call with the value 0, then the exception CX_SY_ZERODIVIDE is triggered, propagated, and can, as shown in the example, be handled by the caller in a TRY control structure.
CLASS math DEFINITION.
PUBLIC SECTION.
    METHODS divide_1_by
       IMPORTING operand TYPE I
       EXPORTING result TYPE f
       RAISING   cx_sy_arithmetic_error.
ENDCLASS.
CLASS math IMPLEMENTATION.
METHOD divide_1_by.
    result = 1 / operand.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
DATA oref TYPE REF TO math.
DATA exc TYPE REF TO cx_sy_arithmetic_error.
DATA res TYPE f.
DATA text TYPE string.
CREATE OBJECT oref.
TRY.
    oref->divide_1_by( EXPORTING operand = 4
                       IMPORTING result = res ).
    text = res.
CATCH cx_sy_arithmetic_error INTO exc.
    text = exc->get_text( ).
ENDTRY.
MESSAGE text TYPE 'I'.
Addition 5
... EXCEPTIONS exc1 exc2 ...
Effect
Use addition EXCEPTIONS to define a list of non-class-based exceptions exc1 exc2..., which can be triggered with the statements RAISE or MESSAGE RAISING in the method. You specify identifiers exc1 exc2 ... for the exceptions to be defined at will and directly. Exceptions defined in this way are bound to the method - similar to formal parameters - and cannot be propagated.
If such an exception is triggered in a method and no return value has been assigned to it in the addition EXCEPTIONS of the CALL METHOD statement in the method call, then a runtime error occurs.
Note
The additions RAISING and EXCEPTIONS cannot be used simultaneously. For new developments starting at release 6.10, we recommend to use class-based exceptions, which are independent of the respective method.
Example
In the class math, for method divide_1_by an exception arith_error is defined, which is triggered in the method with the RAISE statement if an arithmetic error occurs. If, for example, the input parameter operand is filled with value 0 at the call, the exception arith_error is triggered in the method-internal handling of exception CX_SY_ZERODIVIDE and handled after the call of the method by evaluating sy-subrc.
CLASS math DEFINITION.
PUBLIC SECTION.
    METHODS divide_1_by
       IMPORTING operand TYPE I
       EXPORTING result TYPE f
       EXCEPTIONS arith_error.
ENDCLASS.
CLASS math IMPLEMENTATION.
METHOD divide_1_by.
    TRY.
        result = 1 / operand.
      CATCH cx_sy_arithmetic_error.
        RAISE arith_error.
    ENDTRY.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
DATA res TYPE f.
DATA oref TYPE REF TO math.
CREATE OBJECT oref.
oref->divide_1_by( EXPORTING operand = 4
                   IMPORTING result = res
                   EXCEPTIONS arith_error = 4 ).
IF sy-subrc = 0.
WRITE res.
ELSE.
WRITE 'Arithmetic error!'.
ENDIF.
Regards.

Dynpro field: value help via function module

Hi all!
I've got a subscreen with an input field. We would like to use function module RH_OBJID_REQUEST_46A to create a popup where the user is able to select values.
In a normal report I would do this with AT SELECTION-SCREEN ON VALUE-REQUEST FOR. I wonder how it to do it in a dynpro? Is it neccessary to implement a search help and call the function module in a search exit?
Thank you a lot!
Florian

hi
in the Dypro screen , goto flow logic.
Process Before output
Process After input
Process on value request.
field vbeln module mycode_vbeln. "in this module mycode_vbeln, u will write ur code
Kind Regards
Sajid

Error 5398 Duplicate value addition in attribute ...

I'm seeing the following error messages in my error log and am not sure what to do about it since the reference guide does not list it. Solaris 8, DS 5.2.
ERROR<5398> - Entry - conn=-1 op=-1 msgId=-1 - Duplicate value addition in attribute "objectClass" of entry "ou=Configs, o=Contivity, o=vpn"
ERROR<5398> - Entry - conn=-1 op=-1 msgId=-1 - Duplicate value addition in attribute "objectClass" of entry "cn=14649, ou=Configs, o=Contivity, o=vpn"
Here are some historical events that may help shed light on things:
The errors are occuring on Searay. I have another LDAP server called Mantaray. Here is some historical data that ay help shed light on the matter:
I wanted the DNS domain the LDAP was using changed on Searay so I configured searay:o=vpn for Master replication and created o=vpn on Mantaray and configured it as a consumer.
After the suffix was replicated I broke the replication and unconfigured Searay and then configured it. I then did the reverse and made Mantaray:o=vpn the master and Searay:o=vpn the consumer. I then broke the replication again and tried to get Multi-Master replication to work between the two servers. It took a few tries before things seemed to start working right.

This thread (http://swforum.sun.com/jive/thread.jspa?forumID=13&threadID=21473) seems similar but I cannot find where the nsslapd-rererral that kunal mehta mentions is located.
I did look at the des.ldif for each server and both looked okay.

SOA 11g value addition to business

Can any provide any document/presentation, which presents all the value additions to client bsuiness if it migrates from SOA 10g to 11g?
Regards
pidi

Lots of reasons to mention, like -
1. Complete suite running over weblogic server
2. Both Oracle Service Bus and SOA can share the same domain
3. Integrated SCA-based designer which enables easy and faster development
etc etc etc.....
You may like to contact your local Oracle sales representative to know more. Few links which you may like to visit -
http://www.oracle.com/us/technologies/soa/soa-suite-066466.html
http://www.oracle.com/us/technologies/soa/index.html
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/toc.htm
Regards,
Anuj

Query in passing value to a function module

Hi All ,
I have a small query in the below code about the way i have passed value into a function module :
CALL FUNCTION 'AUTHORITY_CHECK'
EXPORTING
USER                      = SY-UNAME
    OBJECT                    = 'E_INVOICE'
    FIELD1                    = 'BEGRU'
VALUE1                    = ' '
   FIELD2                    = 'BUKRS'
   VALUE2                    = '$BUKRS'
   FIELD3                    = 'ISU_ACTIVT'
   VALUE3                    = '1,2,5,6'
   FIELD4                    = 'VKTYP_KK'
VALUE4                    = ' '
EXCEPTIONS
   USER_DONT_EXIST           = 1
   USER_IS_AUTHORIZED        = 2
   USER_NOT_AUTHORIZED       = 3
   USER_IS_LOCKED            = 4
   OTHERS                    = 5
IF SY-SUBRC <> 0.
MESSAGE 'User doesnt have sufficient authorizations' TYPE 'E'.
EXIT.
The query is on the field VALUE3                    = '1,2,5,6' , is the format correct. If this is not right could someone please suggest the correct approach.
thanks

Hi Balaji,
as that is parameter you can use at a time only one value..
if you check in that FM we have other parameters VALUE1 to VALUE10..
why don't you use those...
Thanks!

Suggest Free Tools & Technologies that I can use as value additions to company

I found this as an alternative for Microsoft Office Communicator..
http://www.officesip.com/messenger.html

Hi,
I have got lot of answers to "What are the best advices for an Starting IT Manager".
Could you all please help me to identify all the Free Tools & Technologies that I can suggest & impliment to my new company as value additions.
Eg:Help Desk SoftwaresVoIP ToolsIT PoliciesDocument Sharing tools Etc....& all other valuble things come free.
Thank you,
This topic first appeared in the Spiceworks Community

Significance of pass value checkbox in function module

Hi all,
Here is a confusion.....While creating a custom function module,i have checked the update module or RFC call radio button going to its attributes.But in the importing parameter if i pass a structure,it is giving a syntax error.It is only allowing table parameter.But if i check the pass value checkbox,it is not givng any syntax error if i pass any structure in the importing parameter.Can anybody please explain me the significance of pass value checkbox?
Thanks in advance.......

Hi,
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for <b>'pass by value'</b> is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Regards,
Srilatha.

Pass a particular value in the function module.

Hi Gurus!
I have a function module READ_HAUPTBUCH_TEXT , here in the importing table KONTENPLAN like ska1-ktopl.
But I need to pass a value as ZNOA for KONTENPLAN while calling the function which is maintained in the db, but it is always picking up the value 'AZ'.
can you please let me know as to how i do it .thx in advance.

hi sandeep it is better to pass like this...
data: v_ktopl type ska1-ktopl.
        clear v_ktopl.
         v_ktopl = itab-ktopl.
      CALL FUNCTION 'READ_HAUPTBUCH_TEXT'
        EXPORTING
          kontenplan           = v_ktopl
          sachkonto            =
          sprache              =
        NO_BUFFER            =
      IMPORTING
        TEXT_WA              =
      EXCEPTIONS
        TEXT_NOT_FOUND       = 1
        OTHERS               = 2
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
regards,
venkat.

Pass Values between two Function Modules RFC in Portal

I need to pass values between 2 FM RFC.
I have an implicit enhancement in HRMSS_RFC_EP_READ_GENERALDATA RFC function module.
PERNR LIKE PSKEY-PERNR
ENHANCEMENT 1 Z_ESS_EXPORT_PERNR.    "active version
EXPORT pernr to memory id 'PMK'.
set parameter id 'PMK' field pernr.
ENDENHANCEMENT.
On the other hand an RFC function module that has the code:
        pmk    LIKE PSKEY-PERNR,
        pmk_2 LIKE PSKEY-PERNR.
get parameter id 'PMK' field pmk.
IMPORT pmk_2 FROM MEMORY ID 'PMK'.
When the execution is done in development environment, the modules function at the level of R3, the "get parameter id" works only if the debbuger is classic, otherwise not work. The Import to memory id never works.
In the environment of quality, r3 do not work any of the 2 sentences. If run from portal (which is as it should be) does not work.
Thanks if anyone can help me get the problem. Both function modules are executed at the portal.
Regards
Edited by: Daynet1840 on Feb 15, 2012 2:02 AM

When the execution is directly in r3, in development environment or quality, does the set / get parameter id. Export / Import memory id not work.
But if the FM are called from the portal, does not the set / get parameter id.
I tried changing the sentence as I indicated harishkumar.dy still not working.
Madhu: They're in different function groups, one is standard and the other not.
Regards
Edited by: Daynet1840 on Feb 15, 2012 3:08 PM
Edited by: Daynet1840 on Feb 15, 2012 3:11 PM

Value addition on asset

Hi,
Please let me know how SAP would calculate depreciation in the following business scenario.
Jan 1st 2004: An Asset is aquired for $1000.
Life time: 3 years
Depreciation on Dec 2004: $300
Depreciation on Dec 2005: $300
Value left on asset: $400
On Jan 1st 2006 or some time during the 3rd year, the asset got re-furbished and now the value of the asset after refurbishment is $600 and with an additional life time of 2 years.
By accounting principles, I would expect the asset to depreciate
Depreciation on Dec 2006: $300
Depreciation on Dec 2007: $300
Retirement.
What would SAP do in this context?
Thanks,
Sivaram

Once the depreciation start date is set, the subsequent acquisitions will take this depreciation start date as reference, and not the date of the subsequent acquistion, as you are assuming.
Please read SAP note 46456, which explains this issue more in detail.
The 'Calculate according to asset value date' indicator in the calculation key for the depreciation cannot be maintained as of maintenance level 3.0E. As SAP note 53166 describes this indicator frequently caused misunderstandings. And that is why this function has been "removed".
But, you can still configure this behaviour with a modification, in table T090NP, field XBZDAT at your own risk. Please beware that with such a modification, there is no support in case of future incidences. In note 814004 you will find a short report which enables you to change the parameter.
I hope this will help you.
Kind Regards,
Pankaj

Value additions in pp module

Similar Messages

Maybe you are looking for