Value Mapping - size limit

Hi all,
We got a doubt regarding value mapping,
Is there any size limit for value mapping tables that we are creating in Configuration?
Thanks and regards,
sasi

Hi,
since the valueMapping will be executed on Java Stack, the size limit will rely on your JVM memory setting (Heap size, basically).
But the memory request will be from your payload. As a rule of thumb, the memory requirement will be 5-10 times of your payload size.
Cheers,
Aaron

Similar Messages

Procedure varchar2 parameter size limit? ORA-6502 Numeric or value error

Hi ALL,
I am trying to create out parameters in a Procedure. This procedure will be called by 4 other Procedures.
PROCEDURE create_serv_conf_attn_cc_email
( v_pdf_or_text varchar2,
v_trip_number number ,
v_display_attn_for_allmodes out varchar2,
v_display_cc_for_allmodes out varchar2,
v_multi_email_addresses out varchar2,
v_multi_copy_email_addresses out varchar2
When I call that procedure in another Procedure I am getting following error, which is caused by one of the out parameter being more than 255 characters.
I found that out via dbms_output.put_line(ing) one of the out parameter as I increased its size.
ORA-06502: PL/SQL: numeric or value error
I thought there was no size limit on any parameters passed to a Procedure.
Any one know of this limit of 255 characters on varchar2 Procedure parameters? Is there a work around keeping the same logic?
If not I will have to take those parameters out and resort to some global varchar2s which I do not like.
Thanks,
Suresh Bhat

I assume one of the variables you have declared is not large enough for it's assignment.
Here's an example.
ME_XE?create or replace procedure test_size(plarge in out varchar2 )
2 is
3 begin
4     plarge := rpad('a', 32000, 'a');
5 end;
6 /
SP2-0804: Procedure created with compilation warnings
Elapsed: 00:00:00.03
ME_XE?
ME_XE?declare
2     my_var   varchar2(32767);
3 begin
4     test_size(my_var);
5     dbms_output.put_line(length(my_var));
6 end;
7 /
32000
PL/SQL procedure successfully completed.
--NOTE here how the declared variable is 500 characters, but the procedure will try to assign it over 32,000 characters...no dice
Elapsed: 00:00:00.00
ME_XE?
ME_XE?declare
2     my_var   varchar2(500);
3 begin
4     test_size(my_var);
5     dbms_output.put_line(length(my_var));
6 end;
7 /
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "TUBBY.TEST_SIZE", line 4
ORA-06512: at line 4
Elapsed: 00:00:00.04Edited by: Tubby on Oct 22, 2008 12:47 PM

Reg: Value Mapping - Recommended Max Entries/Size

Hi,
Just curious to know if there is any recommendation on the max number of entries stored and retrieved in a Value Maps.
Is it suitable for storing entries in order of 5000 or 10000. Also is it effecient for retrieval from such a big Map.
Since it is stored in Java Cache, is there any limitation on the size (Number of Entries).
Anticipating your valuable inputs.
Thanks,
Sudharshan N A

Hi
There will be performance problem if more entries are used in Value mapping.
Value mapping replication will be better choice for huge records.
Regards
Abhijit

Can list value of size can be limit in designer?

Can list value of size can be limit in designer?
How to configurate it?
Thanks

Hi Emily,
If you are talking about List of values in designer then yes maxno of lovs can be 256.
Please ignore this if it not appropriate
Cheers,
Suresh A.

Is there limits on maps size?

Hello,
I'm wondering if there's a maximum size of operators used to build maps, or if there's any limits on their number or their names?
I've got this error on deployment :
ORA-06550 and PLS-00172: string literal too long,
but when I reduced the names of the tables (I used in the map), every thing worked fine..
another thing..
can this error :
"ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
be issued for other reasons than :
Cause: An arithmetic, numeric, string, conversion, or constraint error occurred. For example, this error occurs if an attempt is made to assign the value NULL to a variable declared NOT NULL, or if an attempt is made to assign an integer larger than 99 to a variable declared NUMBER(2).
Action: Change the data, how it is manipulated, or how it is declared so that values do not violate constraints.
the map worked fine, but when i used extra joiners and set operations , i kept having this error..
any help is highly appreciated..
Thanks,

Hi
There are several aspects, which limit mapping size:
     *Builder internal java variable limits, memory limits etc.
     *Builder stored code in DB (builder stores pl/sql in clob fields)
     *DB limits on PL/SQL code size
I think, that basically, the limit is on builder side.
In Oracle 10g CLOB datatype limit is (4GB-1)*(database block size) and 8i, 9i the size is restricted to 4GB.
PL/SQL code limit is ~6,000,000 lines of code, but there is other limits, which is important for PL/SQL compiler (for example "objects referenced by a program unit" or "levels of subquery nesting"). If PL/SQL will exceed the size limit, then you will get a error like "program too large".
You can see size of objects (PL/SQL packages, views etc.):
SELECT * FROM user_object_size WHERE name = 'object_name';
ORA-06502 error is related only to data, there is, wrong manipulation or declaration of data, constraints is violated.
Usually I’m getting ORA-06502 error when I load data from national code (1 byte) character DB into Unicode (2 byte) character DB, because the string like 'AĀA' in national character DB have 3 bytes, but in Unicode DB 4 bytes.
Regards
Message was edited by:
Armands
Message was edited by:
Armands

How do I change the attachment size limit in Calendar Server 6.3, UWC, IWC?

How do I properly increase or decrease the attachment size limit with Calendar Server and all supported user interfaces to it such as WCAP, UWC (Communications Express) and IWC (Convergence)? From my experience with the Outlook Connector, there seems to be some limit imposed by cshttpd on the size of a file upload (I believe I actually got an HTTP error code back on the wcap request indicating something was too big, sorry I don't have it handy, I'll have to re-test). Additionally, it seems UWC imposes additional limits (Example: http://docs.sun.com/app/docs/doc/819-4440/6n6jfgcjh?l=en&a=view&q=fileSizeHardLimit) but I can't seem to get those to work at all. I found many different web.xml related to UWC and I'm not sure which one to change, I tried a couple but had no success because UWC would always report this error if I uploaded between 4-5 megs: com.iplanet.jato.util.WrapperRuntimeException
Root cause = [java.io.IOException: Request cancelled because file input field
"importFile" size is over the configurable limit of 4194304 bytes; see filter init
parameter fileSizeHardLimit]
And it would complain about requestSizeLimit I think if it was over 5 megs, claiming that limit was 5242880. IWC gives a generic error when the upload is too big and rejects it.
I fear that a 4 meg limit will be too imposing and of limited value, so I would either like to raise it, or consider lowering it to 0 bytes so attachments cannot be used at all. I have been looking high and low for information on how to do this and all I can find is the UWC examples. I plan to support the Outlook Connector, UWC, and IWC so the limits should ideally be the same across each. Some of the Exchange data we wish to import does have some attachments so it would be good to continue support for that. I did see some other posts about quota RFEs but at this point I am not concerned about the disk consumption. Can anyone help? Thanks. Please let me know if there is any more information I can provide. I am running SCS6u1 on Solaris 10 SPARC.

Fred@egr wrote:
Thanks!!! This is working with IWC and I am pretty sure it will work with Outlook. I didn't think to look at config options for mshttpd since I don't have it installed and ics.conf doesn't list the http.service.maxmessagesize and service.http.maxpostsize by default.http.service.maxmessagesize is only relevant to mshttpd, not cshttpd. service.http.maxpostsize applies to both.
UWC is still limiting me though; I'm sure I can reconfigure UWC if I just know which file to edit and if I need to redeploy anything. I'm using the same install paths as the SCS6 Single Host example and I'm not sure which the "uwc-deployed-path" is supposed to be. Again, thanks.If you have deployed UWC/CE to Application Server you would edit the following file and restart application-server:
/opt/SUNWappserver/domains/domain1/generated/xml/j2ee-modules/Communications_Express/web.xml
e.g.
<filter>
    <filter-name>MultipartFormServletFilter</filter-name>
    <filter-class>com.sun.uwc.calclient.MultipartFormServletFilter</filter-class>
    <init-param>
      <param-name>fileSizeHardLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>requestSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
    <init-param>
      <param-name>fileSizeLimit</param-name>
      <param-value>15485760</param-value>
    </init-param>
</filter>Regards,
Shane.

FILE and FTP Adapter file size limit

Hi,
Oracle SOA Suite ESB related:
I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
2) For structured files, could someone help me in debatching a file with the following structure.
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_2
300|Line_id_2|1234|Location_ID_2
400|Location_ID_2|1234|Dist_ID_2
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_N
300|Line_id_N|1234|Location_ID_N
400|Location_ID_N|1234|Dist_ID_N
999|SSS|1234|88|158
I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
999|SSS|1234|88|158
Thanks in advance,
RV
Edited by: user10236075 on May 25, 2009 4:12 PM
Edited by: user10236075 on May 25, 2009 4:14 PM

Ok Here are the steps
1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
<jca:binding />
        <operation name="MoveWithXlate">
      <jca:operation
          InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
          SourcePhysicalDirectory="foo1"
          SourceFileName="bar1"
          TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
          TargetFileName="purchase_fixed.txt"
          SourceSchema="address-csv.xsd"
          SourceSchemaRoot ="Root-Element"
          SourceType="native"
          TargetSchema="address-fixedLength.xsd"
          TargetSchemaRoot ="Root-Element"
          TargetType="native"
          Xsl="addr1Toaddr2.xsl"
          Type="MOVE">
      </jca:operation> 7. Edit the outbound header to look as follows
    <types>
        <schema attributeFormDefault="qualified" elementFormDefault="qualified"
                targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
                xmlns="http://www.w3.org/2001/XMLSchema"
                xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
            <element name="OutboundFileHeaderType">
                <complexType>
                    <sequence>
                        <element name="fileName" type="string"/>
                        <element name="sourceDirectory" type="string"/>
                        <element name="sourceFileName" type="string"/>
                        <element name="targetDirectory" type="string"/>
                        <element name="targetFileName" type="string"/>
                    </sequence>
                </complexType>
            </element>
        </schema>
    </types>   8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
    <assign name="Assign_Headers">
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:fileName"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
      </copy>
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:directory"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
      </copy>
    </assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
cheers
James

Message size limit

Hi all,
I have a question regarding the message size for the mapping:
What is the size limit for messages when using the XSLT mapping methods?
What are the maximum message sizes (if any) for the other methods like ABAP mapping, Graphical mapping, JAVA Mapping and XSLT Mapping (JAVA) ?
Looking foward to hear from you:)
Regards
Markus

Hi Markus,
Just go through the belwo thread which talks about the same.
Wat is the maximu size of data XI can handle
Also go through the mapping performance which helps u in understanding the performance as well.
Mapping Performance:
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
Thnx
Chirag
Reward points if it helps.

S1000 Data file size limit is reached in statement

I am new to Java and was given the task to trouble shoot a java application that was written a few years ago and no longer supported. The java application creates database files the user's directory: diwdb.properties, diwdb.data, diwdb.lproperties, diwdb.script. The purpose of the application is to open a zip file and insert the files into a table in the database.
The values that are populated in the diwdb.properties file are as follows:
#HSQL Database Engine
#Wed Jan 30 08:55:05 GMT 2013
hsqldb.script_format=0
runtime.gc_interval=0
sql.enforce_strict_size=false
hsqldb.cache_size_scale=8
readonly=false
hsqldb.nio_data_file=true
hsqldb.cache_scale=14
version=1.8.0
hsqldb.default_table_type=memory
hsqldb.cache_file_scale=1
hsqldb.log_size=200
modified=yes
hsqldb.cache_version=1.7.0
hsqldb.original_version=1.8.0
hsqldb.compatible_version=1.8.0
Once the databsae file gets to 2GB it brings up the error meessage 'S1000 Data file size limit is reached in statement (Insert into <tablename>......
From searching on the itnernet it appeared that the parameter hsqldb.cache_file_scale needed to be increased & 8 was a suggested value.
I have the distribution files (.jar & .jnlp) that are used to run the application. And I have a source directory that was found that contains java files. But I do not see any properties files to set any parameters. I was able to load both directories into NetBeans but really don't know if the files can be rebuilt for distribution as I'm not clear on what I'm doing and NetBeans shows errors in some of the directories.
I have also tried to add parameters to the startup url: http://uknt117.uk.infores.com/DIW/DIW.jnlp?hsqldb.large_data=true?hsqldb.cache_file_scale=8 but that does not affect the application.
I have been struggling with this for quite some time. Would greatly appreciate any assistance to help resolve this.
Thanks!

Thanks! But where would I run the sql statement. When anyone launches the application it creates the database files in their user directory. How would I connect to the database after that to execute the statement?
I see the create table statements in the files I have pulled into NetBeans in both the source folder and the distribution folder. Could I add the statement there before the table is created in the jar file in the distribution folder and then re-compile it for distribution? OR would I need to add it to the file in source directory and recompile those to create a new distribution?
Thanks!

Is there a size limit on internal HD? iBook G4 1Ghz

Recently bought a used 12" iBook G4. Of course no installation discs came with it.
When received it had a 30 Gb hard drive, 528 mb RAM, and 10.3.9.
I wanted to max out RAM, increase HD size, and move to 10.4.x.
(Additional background - I have various other Macs and can use Fire Wire Target Mode from any of them to the "new" iBook.)
RAM upgrade successful. I borrowed install discs from a friend with a similar though not identical machine; his is a 1.33 Ghz. When I removed the old HD and replaced with a new 160 Gb drive, the Install discs did not see the HD. So I took the iBook apart again, put the new drive in an OWC external enclosure connected to my Powerbook G4. Saw that the drive needed formatting, duh, I did so. Put it back in the iBook. Started up from the install disc, it still did not see the HD. Started the iBook in Fire Wire Target mode; could not see the newly installed HD from the other machine either; all I could see on the iBook end of the Firewire was the CD/DVD. I have looked through various threads here related both to iBook HD replacement and to system upgrade concerns - nothing I find matches my issue.
I have since reinstalled the original 30 Gb HD, have used the borrowed installation discs to do a clean install of 10.3.x (so the similar but not identical was close enough) and a retail 10.4 Install to upgrade the system. So, 2 out of 3; I have my expanded memory, a clean upgraded system. But I hate to give up on a bigger internal HD!!!
1. Is there a size limit on the internal HD on the iBook? Is 160 Gb too large, and should I try again with a less aggressive increase? I do have a 60 Gb I could pull out of a PB G4 I will probably sell...
2. If size is not the problem, it seems that maybe it would help if I somehow pre-install the system onto the 160Gb before I physically put it into the iBook. But I do not understand the whole process of making bootable backups etc. Is there a way I can copy my current installation, or do a reinstallation of 10.3.x or 10.4.x on the 160 Gb while is is external, connected via Firewire, and then swap the 160 Gb into the iBook and have it just boot up? I see hard drives for sale in eBay "with OS X 10.x.x already installed..."? I tried, both from my Powerbook and from the iBook to do an Install onto the 160 Gb while it was attached via Firewire. The PB didn't want to have anything to do with those iBook Install discs. The iBook wouldn't allow me the option of doing an Installation onto the External drive. And I assume that a simple Select-All-and-Copy isn't going to do it for me. So how do I install onto the drive while it is external, and will it work once I move it into the iBook?
3. Probably not important, but out of curiosity... if I could use my Powerbook G4 Installation discs to burn a new system onto my 160 Gb drive (when it was connected as an external to the PB), and then put that drive into the iBook, would that work? Or would iBook vs. Powerbook differences throw off the installation?
Thanks!
Stan

Shiftless:
Is there a size limit on the internal HD on the iBook?
The only limitation of HDD size is due to availability. The largest capacity ATA/IDE HDD available is 250 GB. Theoretically there is no limit to the capacity your computer will support, if larger capacity HDDs were available.
If size is not the problem, it seems that maybe it would help if I somehow pre-install the system onto the 160Gb before I physically put it into the iBook.
This is not necessary, although you could do it this way. I note in your later responses that you have already attempted this process and have some difficulties. Here is the procedure I would recommend, after the HDD is installed.
• Clone the old internal HDD to an external firewire HDD. I gather you have done this.
• Format and erase the newly installed HDD (directions follow).
• Install new OS from disk or clone back from external HDD. (Post back for directions if you choose to install from this and then restore from backup).
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
cornelius

Messaging server size limit

Hallo
As I see, I have common problem among the Sun Messaging Server administrators. I have whole system distributed on several virtual solaris machines and some days ago emerged message size problem. I noticed it in relation with incoming mail. When I create new user, he or she can't get larger mail then 300K. Sender get will known message:
This message is larger than the current system limit or the recipient's mailbox is full. Create a shorter message body or remove attachments and try sending it again.
<server.domain.com #5.3.4 smtp;552 5.3.4 a message size of 302 kilobytes exceeds the size limit of 300 kilobytes computed for this transaction>
Interesting thin is, that this problem arised with no correlation with other actions. I noticed this problem with new users before, but i could successful manage it with different service packs. Now this method with new users, this method doesn't work! Old users normally recieve messages bigger then 300k, as before.
I tried to set default setting blocklimit 2000 in imta.cnf, but I didn't succeed.
I know, that size limit can be set on different places, but is there a simple way, to set sending and recieving message size unlimited?
Messaging server version is:
Sun Java(tm) System Messaging Server 7u2-7.02 64bit (built Apr 16 2009)*
libimta.so 7u2-7.02 64bit (built 03:03:02, Apr 16 2009)*
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)*
SunOS mailstore 5.10 Generic_138888-01 sun4v sparc SUNW,SPARC-Enterprise-T5120*
Regards
Matej

For the sake of correctness, the attribute name in LDAP is mailMsgMaxBlocks.
I also stumbled upon this - the values like 300 blocks or 7000 blocks are set in (sample) service packages but are not advertised in Delegated Admin web-interface. When packages are assigned, these values are copied into each user's LDAP entry as well, and can not be seen or changed in web-interface.
And then mail users get "weird" errors like:
550 5.2.3 user limit of 7000 kilobytes on message size exceeded: [email protected]
or
550 5.2.3 user limit of 300 kilobytes on message size exceeded: [email protected]
resulting in
<[email protected]>... User unknown
or
552 5.3.4 a message size of 7003 kilobytes exceeds the size limit of 7000 kilobytes computed for this transaction
or
552 5.3.4 a message size of 302 kilobytes exceeds the size limit of 300 kilobytes computed for this transaction
resulting in
Service unavailable
I guess there are other similar error messages, but these two are most common.
I hope other people googling up the problem would get to this post too ;)
One solution is to replace the predefined service packages with several of your own, i.e. ldapadd entries like these (fix the dc=domain,dc=com part to suit your deployment, and both cn parts if you rename them), and restart the DA webcontainer:
dn: cn=Mail-Calendar - Unlimited,o=mailcalendaruser,o=cosTemplates,dc=domain,dc=com
cn: Mail-Calendar - Unlimited
daservicetype: calendar user
daservicetype: mail user
mailallowedserviceaccess: imaps:ALL$pops:ALL$+smtps:ALL$+https:ALL$+pop:ALL$+imap:ALL$+smtp:ALL$+http:ALL
mailmsgmaxblocks: 20480
mailmsgquota: -1
mailquota: -1
objectclass: top
objectclass: LDAPsubentry
objectclass: costemplate
objectclass: extensibleobject
dn: cn=Mail-Calendar - 100M,o=mailcalendaruser,o=cosTemplates,dc=domain,dc=com
cn: Mail-Calendar - 100M
daservicetype: calendar user
daservicetype: mail user
mailallowedserviceaccess: imaps:ALL$pops:ALL$+smtps:ALL$+https:ALL$+pop:ALL$+imap:ALL$+smtp:ALL$+http:ALL
mailmsgmaxblocks: 20480
mailmsgquota: 10000
mailquota: 104857600
objectclass: top
objectclass: LDAPsubentry
objectclass: costemplate
objectclass: extensibleobject
dn: cn=Mail-Calendar - 500M,o=mailcalendaruser,o=cosTemplates,dc=domain,dc=com
cn: Mail-Calendar - 500M
daservicetype: calendar user
daservicetype: mail user
mailallowedserviceaccess: imaps:ALL$pops:ALL$+smtps:ALL$+https:ALL$+pop:ALL$+imap:ALL$+smtp:ALL$+http:ALL
mailmsgmaxblocks: 20480
mailmsgquota: 10000
mailquota: 524288000
objectclass: top
objectclass: LDAPsubentry
objectclass: costemplate
objectclass: extensibleobject
See also limits in config files -
* msg.conf (in bytes):
service.http.maxmessagesize = 20480000
service.http.maxpostsize = 20480000
and
* imta.cnf (in 1k blocks): <channel block definition> ... maxblocks 20000 blocklimit 20000 sourceblocklimit 20000
i.e.:
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 2 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck slave_debug sourcespamfilter2optin virus destinationspamfilter2optin virus maxblocks 20000 blocklimit 20000 sourceblocklimit 20000 daemon outwardrelay.domain.com
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4 maxblocks 20000 blocklimit 20000 sourceblocklimit 20000
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4 slave_debug maxblocks 20000 blocklimit 20000 sourceblocklimit 20000
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4 maxblocks 20000 blocklimit 20000 sourceblocklimit 20000
If your deployment uses other SMTP components, like milters to check for viruses and spam, in/out relays separate from Sun Messaging, other mailbox servers, etc. make sure to use a common size limit.
For sendmail relays sendmail.mc (m4) config source file it could mean lines like these:
define(`SMTP_MAILER_MAX', `20480000')dnl
define(`confMAX_MESSAGE_SIZE', `20480000')dnl
HTH,
//Jim Klimov
PS: Great thanks to Shane Hjorth who originally helped me to figure all of this out! ;)

Folio file size limit

In the past their were file size limits for folios and folio resources. I believe folios and their resources could not go over 100MB.
Is their a file size limit to a folio and its resources? What is the limit?
What happens if the limit is exceeded?
Dave

Article size is currently capped at 2GB. We've seen individual articles of up to 750MB in size but as mentioned previously you do start bumping into timeout issues uploading content of that size. We're currently looking at implementing a maximum article size based on the practical limitations of upload and download times and timeout values being hit.
This check will be applied at article creation time and you will not be allowed to create articles larger than our maximum size. Please note that we are working on architecture changes that will allow the creation of larger content but that will take some time to implement.
Currently to get the best performance you should have all your content on your local machine (Not on a network drive), shut down any extra applications, get the fastest machine you can, with the most memory. The size of article is direclty proportional to the speed at which you can bundle an article and get it uploaded to the server.

Maximum time/size limit for Beehive Conference recording

Hi, What is the maximum time/size limit for Beehive Conference recording?
Thanks
Chinni

Looks like I found the probable location of this size limit. Looking at the web.config file in the
ExchServer\ClientAccess\Sync folder there is an entry for "MaxDocumentDataSize". THe value is currently set at 10240000:
<add key="MaxDocumentDataSize" vaulue ="10240000">
So this is 9.75 MB or there about, which sounds about right. I will try increasing this limit at some point to verify.
Can anyone confirm this?

SGA Max Size limit?

Hi,
I have Fujitsu mid range Server with 16gb RAM and 64 bit Windows Server 2003,10g R2 db installed, current i have SGA size 4gb..
What is SGA max size limit????
One of my report runs in 24 seconds...*will this issue b solved increasing the SGA size upto 10,12 gb?*

Yes,
You can also go for a 10046 event tracing...
ACCEPT sid PROMPT 'Enter SID: '
ACCEPT serial PROMPT 'Enter SERIAL#: '
ACCEPT action PROMPT 'Enter TRUE or FALSE: '
EXEC sys.DBMS_SYSTEM.SET_SQL_TRACE_IN_SESSION(&sid,&serial,&action);
prompt Trace &action for &sid,&serial
exec DBMS_SYSTEM.SET_EV(10,20,10046,12,”);
Then you can check your dump file and see whcih events are higher......
For Eg. content could be like:
=====================
PARSING IN CURSOR #6 len=107 dep=1 uid=44 oct=6 lid=44 tim=1621758552415 hv=3988607735 ad='902c07a8'
UPDATE rn_lu_lastname_loca set entr_loca_id_plz14 = translate(entr_loca_id_plz14,'_','-') where rowid = :b1
END OF STMT
PARSE #6:c=0,e=981,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=0,tim=1621758552403
BINDS #6:
bind 0: dty=1 mxl=32(18) mal=00 scl=00 pre=00 oacflg=13 oacfl2=1 size=32 offset=0
bfp=10331d748 bln=32 avl=18 flg=09
value="AAAHINAATAAAwTTABV"
WAIT #6: nam='db file sequential read' ela= 12170 p1=6 p2=197843 p3=1
WAIT #6: nam='db file sequential read' ela= 8051 p1=14 p2=261084 p3=1
WAIT #6: nam='db file sequential read' ela= 7165 p1=19 p2=147722 p3=1
WAIT #6: nam='db file sequential read' ela= 9604 p1=19 p2=133999 p3=1
WAIT #6: nam='db file sequential read' ela= 6381 p1=19 p2=133801 p3=1
EXEC #6:c=10000,e=45750,p=5,cr=1,cu=10,mis=0,r=1,dep=1,og=4,tim=1621758598343
FETCH #5:c=0,e=357,p=0,cr=5,cu=0,mis=0,r=0,dep=1,og=4,tim=1621758598896
EXEC #1:c=30000,e=116691,p=36,cr=35,cu=10,mis=0,r=1,dep=0,og=4,tim=1621758599043
WAIT #1: nam='SQL*Net message to client' ela= 5 p1=1413697536 p2=1 p3=0
WAIT #1: nam='SQL*Net message from client' ela= 2283 p1=1413697536 p2=1 p3=0
Lines that start with WAIT
len Length of SQL statement.
dep Recursive depth of the cursor.
uid Schema user id of parsing user.
oct Oracle command type.
lid Privilege user id.
ela Elapsed time. 8i: in 1/1000th of a second, 9i: 1/1'000'000th of a second
tim Timestamp. Pre-Oracle9i, the times recorded by Oracle only have a resolution of 1/100th of a second (10mS). As of Oracle9i some times are available to microsecond accuracy (1/1,000,000th of a second). The timestamp can be used to determine times between points in the trace file. The value is the value in v$timer when the line was written. If there are TIMESTAMPS in the file you can use the difference between 'tim' values to determine an absolute time.
hv Hash id.
ad SQLTEXT address (see v$sqlarea and v$sqltext).
Lines that start with PARSE, EXEC or FETCH
#n n = number of cursor
c cpu time
e elapsed time
p physical reads
cr consistant reads
cu current mode reads
mis miss in cache (?)
r rows processed
dep recursive depth
og optimizer goal
tim time Content

SQL Server 2008 XML Datatype variable size limit

Can you please let me know the size limit for XML Data type variable in SQL Server 2008?
I have read some where that the XML data type holds up to 2GB size. But, its not the case.
We have defined a variable with XML data type and assigning the value by using SELECT statement FOR XML AUTO with in CTE and assigning the outout of CTE to this XML type variable.
When we limit the rows to 64 which has a length of 43370(used cast(@XMLvariable AS varchar(max)), the variable returns the XML. However, if i increase the rows from 64 to 65 which is length of 44048, then the variable returns with Blank value.
Is there any LENGTH limit of the XML data type?
Thanks in advance!!

Hello,
See MSDN xml (Transact-SQL), the size limit is 2 GB and it is working. If your XML data will be truncated, then because you are doing something wrong; but without knowing table design
(DDL) and your query it's difficult to give you further assistance; so please provide more details.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Value Mapping - size limit

Similar Messages

Maybe you are looking for