Value not populating in report of MB5T ALV report

I had written a logic in implicit of this standard report and iam trying to populate the value in the ALV fieldcatalog.
Iam unable see the value on output screen though the value gets calculated correctly in debug mode.
Any suggestions

Hi venkata
use COMMIT WORK.....maybe it's too fast and it is unable to store the value...
and try to set a break.point before the call of ALV..and check if the table is correctly calculated.
regards
Marco
Edited by: Menegazzo Marco on May 24, 2010 4:09 PM

Similar Messages

Values not populated in S_ALR_87012806 for a specific cost element

Hi all,
Postings made to specific cost element are not populated in report S_ALR_ 87012806. Can anyone throw some light on this?
Thanks
Shravan

Hi Krishna
I dont think "Cost Accounting > LIne Item" would work for Master Data
You can use exit COOPA_01 (SMOD) > Include ZXAUFU08 (Part of EXIT_SAPLKOAU_002)... I have used this for similar purposes in the past
Regards
Ajay M
Edited by: Ajay Maheshwari on Nov 12, 2010 12:45 PM

Value not displaying in report whereas it returns in plsql developer

HI

Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer

Virtual Characteristic value not populating in the query output

Hi Experts,
I am new to BAPI and I am using this to populate the values of virtual characteristics.
I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
The below is the compute method of my implementation class.
FIELD-SYMBOLS :
<fs_0cs_order> TYPE ANY,
<fs_zww_teco> TYPE ANY,
<fs_status> TYPE ANY.
if p_cha_0cs_order > 0.
ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
endif.
if p_cha_zww_teco > 0.
ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
endif.
Select single /BIC/ZSYSTATUS
 from /BI0/PCS_ORDER into <fs_status>
 where CS_ORDER = <fs_cs_order>.
if <fs_status> CP 'TECO'.
<fs_zww_teco> = 'Y'.
else.
 <fs_zww_teco> = 'N'.
endif.
But I am not sure why the values are not populated. But when i debug , i could see the values for
P_cha_0cs_order = 35
p_cha_zww_teco = 54
But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
Can you please guide where i am missing ...
Thanks
Vamsi
Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

Hi Sushant,
RSRT --> Enter Query Name
Click on Technical Information --> If " Virtual Char./Key Figures " = Y
In my case , even then i clciked generate report,
even after that P_CHA_0CS_ORDER = 35
and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
Can you please guide me .
Thanks
Vamsi

COPA Plan values not appearing in report

Hi
I posted COPA Plan values using KEPM and line items are appearing in KE25 but no values are not being appeared in COPA line item report we created using report painter. We used KE94 and KE91.
Actual values appearing correctly in report.
Any help??

Check if you have Plan/Act indicator maintained correctly with the plan value. If it shows up in other reports, I don't see any reason why it will not show up here. I would also check other parameters entered in the report and see if any other characteristic is preventing plan values from populating.
Shail

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Value not populating in the print out (sales order) for the 1st time

Hi friends,
While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
Please give me some clue on where to check and how to go about fixing this problem.
Regards,
Shanu.

Dear Shanu,
This issue may be related bug in the output program so take help of ABAPer to fix the issue.
I hope this will help you,
Regards,
Murali.

Plan next yrs values not appearing in Report Painter

Hi,
In our one of Z report (developed thrugh SAP std Report Painter functionality), Plan next yrs column does not shows any value in output of report.
Basically this column should show next years plan values for WBS Element cost elementwise.
When I double click on any of the cell of this column, I am getting output with 0 records but selection criteria is appearing as Period 7 and Fiscal year as 2999 on output screen on the top. So I am thinking that output is not appearing because of wrong selection criteria field values/characteristics values.
Just wanted to know from you all guys, what things should I check in Report Painter to resolve this issue? Also what are the causes of this issue?
Could you please tell me the remedial procedure and transaction code to resolve this kind of issue?
Edited by: SWAPNIL PRAMOD KHARUL on Jan 30, 2011 12:17 PM
Edited by: SWAPNIL PRAMOD KHARUL on Jan 31, 2011 9:29 AM

Hi,
Thanks for reply.
Characteristics are:
Value Type: ZCJUL01
Value Type:10
Version:6-VERP
Period: 7
Valuation:0
Object ind.:1 to 5
Object ind.:P
Fiscal Year: Z-GJHNJ Next Year to 2999
I think it looks like wrong Period selection characteristics value.
Please suggest/guide what has to be done?
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:19 AM
Edited by: SWAPNIL PRAMOD KHARUL on Feb 3, 2011 9:21 AM

Copa report values not coming in report

hi Gurus
In copa Values are not coming in report.
where is the problem
can anybody suggest
bye
Ramesh Reddy

Hi Ramesh,
First u check with whether the COPA is integrated with other modules or not? that means with fi/mm and co and SD...

System not populating any report in V_UC

Hi all,
i am runing report Incomplete Outbound Deliveries V_UC system not populating report can any one guide me where i am wrong
while executing V_UC report.
Thanks
Ram

Hi,
Goto the t.code "V_UC".
Ensure that correct SD document category is selected in the selection screen.
Select I for "Order" or "J" for delivery etc...
Goto the T.Code "0VLK".Select your delivery type.Details.
Check what is the document category assigned to it.
Maintain the same in "V_UC".
Execute.
Regards,
Krishna.

Badi-Virtual keyfigure value not populating in query

HI all,
I am trying to populate a constant value into the virtual keyfigure when the query is executed but the value is not getting populated.
I followed the steps how to do this by looking into the step by step process for keyfigure article which i found in SDN.
When i execute my BADi in se19 i am able to get the value but not in the query.
Is there a special way to create keyfigures or is it the same way as we create a normal keyfigure.
Can someone tell me how to get the values in query.
Thanks in advance.
Regards,
Harish

Hi,
why dont you debug the badi while executing the report from RSRT t-code. This will give you some idea.
To debug, put a break point in 'define' as well as 'compute' function of your Badi-implementation, then go to RSRT t-code, enter your query name and then click generate. It will stop at the break-point. Here you can see what is the problem
Regards
akshay

Value not showing in the transaction MB5T

Dear all;
In the transaction MB5T the value is not coming for in transit material .how it will come ion the MB5T report?
kindly suggest.
Thanking You;
Regards;
Joydeep mukherjee

Hi Joydeep,
This might help: Stock in Transit quantity in MB52
Reetesh

PO Price Value not coming in report

Dear Gurus,
I have problem that when i run report mb51 for a plant and movt. type 101.In purchase order no of line items there.from all line items some of line items not showing po. price value they are showing 0 amt. but this amount exist in GRN doc or Posting Doc. What is the problem that standard report not showing amt for particular line item .Pl help to solve this problem.
Thanks
Abhinav

Hi
Check once PO item value has been decreased (once GR and IV has been completed on PO you can alter the PO value which will have no effect) and also check deletion indicator/ blocking has been set for PO item.
Thanks

Value not populated for new field - in RSA7 for PI interface in BW

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

Value not displaying in report template

I am attempting to use a template for the first time and am having difficulty when using the following template to format the output of an ApEx 3 report.
All values in the template come from the main table but TRADE comes from a joined table. The output from the report correctly displays the TRADE when run on its own but the value of #TRADE# fails to display when I use the template. Is there something I am missing or should this work?
<tr><td colspan="6"> </td></tr>
<tr><td>Date #CALLDATE#</td><td>&nbsp&nbsp&nbsp&nbsp Client #CLIENT_NAME#</td>
<td>&nbsp&nbsp&nbsp&nbsp JOB #JOB_DESCRIPTION#</td> <td> &nbsp&nbsp&nbsp&nbsp Trade #TRADE#</td>
<td> &nbsp&nbsp&nbsp&nbsp Address #ADDRESS# #TOWN#</td> </tr>
<tr><td colspan="6">___________________________________________________________________________________________________________________________________________________________________________________

Sandy,
It's the first time I have used apex.oracle.com as well so I hope I've done this right.
You did a superb job, thanks a lot. It allowed us to debug the problem, a rather difficult one to isolate as it turned out.
The problem occurs when your report columns' "query column ID" attributes don't match the "column display sequence" attributes. This is apt to happen in queries that use joins and is not a problem in itself. But if you have this situation and also use a named column row template in which you reference column aliases in #ALIAS# format, the wrong value can get substituted. That's what happened in your case.
The workaround until we can fix this is to replace the problem alias reference, e.g., #TRADE# with #13# in the template. I got the value 13 by exporting the page and finding this:wwv_flow_api.create_report_columns (
p_id=> 7496949738101935544 + wwv_flow_api.g_id_offset,
p_region_id=> 7496823660512873188 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_query_column_id=> 13,
p_form_element_id=> null,
p_column_alias=> 'TRADE',
...You'll need to keep track of this template change in case you rearrange the order of the report columns. We expect to fix this bug in the 3.1 release (no announced date yet).
Thanks again.
Scott

Value not populating in report of MB5T ALV report

Similar Messages

Maybe you are looking for