Value not showing in the transaction MB5T

Dear all;
In the transaction MB5T the value is not coming for in transit material .how it will come ion the MB5T report?
kindly suggest.
Thanking You;
Regards;
Joydeep mukherjee

Hi Joydeep,
This might help: Stock in Transit quantity in MB52
Reetesh

Similar Messages

Discount value not showing in the P.O printout

Hi,
I have created a Service p.o with 5 line items,i have entered the condition type RA01 = 10 % for all the items,
But in the P.O printout the discount value is showing only for the first 2 line items , the value is not showing for the balance 3 line items.
Any help will be greatly appreciated.
Nijamudeen.S

Hi,
if the same condition type is used for previous two line items, then this is ABAP issue. May be smartform coding is restricting to print the value for more than 2 line items. Can you seat with ABAP and check.

All value not showing at the time of J1INCHLC - Create Remittance Challan

Hi,
I am facing following problem in TCS
I am trying to process TCS Remittance Challan with T.code J1INCHLC, but all document No. not showing at the time of challan process, I checked entry in TCS GL, Table BSEG & WITH_ITEM all document showing properly. Section code also showing in line item.
I checked some document process with same material & same customer. But only few entries showing at the time of TCS Remittance Challan process. I also compare both entries which is showing & un-showing but no difference found.
Kindly suggest solution to resolve the issue.
Sunil

Hi Sunil
If the entires are there in WITH_ITEM and with Section codes, then it should appear in J1INCHLC. Please check other things like the date ranges you are entering in J1INCHLC. Also try by putting the document number which is missing instead of posting date range and fine out whether is it appearing. If you are able to get it, then you would be in a position to find out why it is not appearing.
Regards
Prasanna

After assigning standered COA G/L List is not showing in the transaction

HI!
I have problem while transaction in FI.COA is not not showing list of G/L Accounts,in fs00 it is showing G/L Account when we give the G/L No.in transaction it is showing skb2 table missing.
Pls give me solution for it.
Thanks
Regards
Archana

Hi,
The GL account has been created at COA level only in your case and has not been extended to Compnay code. hence it gives you taht error entry missing in SKB2 table. If you create a GL at COA level, the table that gets updated is SKB1 and if you extend that GL to compnay code it will show in SKB2 table. So now create that GL through Tcode fS00 in your co code after which it will reflect in your transaction entry and also at table level SKB2.
hope this clarifies
regards,
radhika

Payment from the customer is not showing in the lockbox transaction.

Hi all,
When i execute transaction code FLB1, I could not able to find lockbox and customer did the payment but it was not reflected in sap.
Payment from the customer is not showing in the lockbox transaction.
Please suggest and gide me with solution what could be the reason i am not awear of lockbox process.
Regards,
JC
Edited by: jcnaidu on Sep 17, 2010 6:41 AM

The messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa

Messages are not showing in the SXMB_MONI

Hi...All,
we are doing FILE-RFC synchronous scenario with out BPM, in the communication channel monitoring it was showing success, but in File server file is not coming to target side from sender, messages also not showing in the SXMB_MONI.
how can i solve these issues, pls suggest me...
thanks in advance,
Jain.

Hi,
Please follow the steps below to see the synchronous messages in sxmb_moni
Step 1. Go to transaction SXMB_ADM
Step 2. Click on Integration engine configuration
Step 3.Go to Edit - Change specific configuration data
Step 4. Add the paramaters:
LOGGING and LOGGING_SYNC category RUNTIME current value = 1 (active)
PS: You can also set TRACE_LEVEL to 3 so that all processing steps and details will be logged.
Reward points if answer is useful.
Thanks
Amit

Data value not showing in added column

I have added a column to a fixed SQL query. When the application runs, the column appears in the display grid, but the value is missing.
I have added the column to both the query and display templates. I've added the column to the IlluminatorDoc, reselected the query template in the IllumSQLQuery block, and updated the configuration in the IlluminatorRow block to link the new field.
The new column appears in the Rowsets/Rowset/Column and I can see the value in Rowsets/Rowset/Row. When running the xacute query calling the BLS transaction, the new column and value is displayed in the text/html format.
Can anyone advise on why the column value is not showing in the grid?

Thank you Sam for your answer!
I had the column mapped in the display template, however, I had mapped to the query within the transaction instead of selecting the xacute query. My column names were very similar, but in taking a closer look I realized I had the wrong query. Once I selected the correct query, mapped the column and cleared the Java cache, the value then displayed.
When I right-click on the iGrid, the Data option is disabled and cannot be selected so that I can see the detail. I'm not sure how to correct this.
Thanks again!

Some Software Component Versions do not show up in transaction sproxy

I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
I then went to the business system for the relevant CRM client and there also checked those SWCVs.
But still they do not show up in transaction sproxy in the CRM system.
What am I missing?

Hi Monika,
There's several suggestions that you could look at to help resolve your problem in this thread:
[Can't find ESA ECC-SE 603 SWCV;
Regards, Trevor

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

Metadata values not showing in Site Studio layout using Idoc Script

Hi All,
We have a SS layout (secondary) with replaceable regions for showing content that is listed in a primary page dynamic list.
Part of the layout shows contribution elements of Contributor Data File content items, but part of layout also shows metadata values. We use  to show the content item Title with no problems.
However, for some content items, some metadata values are not showing on the layout - specifically a custom metadata field called xFinishDate (which is of type 'Date' in Config Man). The code  simply does not work (nothing is displayed) for some content items, despite definitely having a set FinishDate value. Some other content items show this value fine.
The  value works for ALL items, but the  does not, and there appears to be no difference between the items that it does, and does not work for. They are all CDF, same DocType, same CheckIn profile, etc.
The non-working items are all released and indexed. Their Content Information in Content Server shows complete metadata. I have resubmitted the non-working items for reconversion in Repo Man but no luck.
Is there something I am missing? Any help is greatly appreciated.
Luke.

Actually the default DOC_INFO resultset that is on the page seems to be for the content item being loaded into the secondary layout's replaceable regions. This is why DOC_INFO.dDocTitle gives the results expected.
However, I think I have discovered why the xFinishDate value was not showing. Using sapan's code (and modifying it a bit) I was able to print out all the metadata field names and values for default DOC_INFO resultset.
Using this URL as an example: http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011217
At the top of page region (replaceable) where the Contributor Data File is loaded into, the DOC_INFO resultset is relevant to the content item that is being loaded into the layout (content ID: BD3_011217 - as per the URL format), which is what we want.
However, throughout the Contributor Data File content, if a link is made using the Site Studio link wizard via FCK Editor (in the above case, it is the position description link, which is a link to a PDF) and the link is 'Link to a file' and the 'Choose Target section' is selected as 'Use default website section metadata', the resulting link looks like "http://www.bond.edu.au/about-bond/jobs-at-bond/BD3_011216". Any references to the DOC_INFO resultset on the page after the instance of this link now use the metadata of the content item referred to in the link, not the original content item. I have dumped out the DOC_INFO fields/values in different parts of the layout to prove this. The linked content item has no xFinishDate value so this is why nothing displays (displaying xFinishDate needs to happen after the link to the position description).
I guess I need to either:
- change the way the link is made to the content item to "Link to the Content Item's URL", but I would prefer not to expose the resulting path e.g. "[!--$HttpRelativeWebRoot--]groups/group-name/@account-name/documents/content-type/content-id.pdf"
- explicitly make a resultset using  with the content ID I know I want and use it instead of the default DOC_INFO one. Is there any other way to make a resultset comprising of a single item's metadata?
9.45 SS_GET_SEARCH_RESULTS
■ Description: This is a wrapper around the regular CS GET_SEARCH_RESULTS
service. It allows some Site Studio features to be specified simply as flags and have
the real query syntax be constructed on the server. It can modify the standard
'SearchResults' resultset to contain an additional column called 'ssUrl' which will
contain the Site Studio-friendly url for all of the search results.
■ Parameters:
– siteId: the unique identifier of the site (required).
– ssLimitScope: True/False, restricting scope to within the site only (optional).
– ssUserSearchText: user-supplied search text (optional).
– ssWebsiteObjectType: object type (optional).
– computeFriendlyUrls: True/False, modify results to include ssUrl (optional).
■ Returns: resultset named ’Search Results’.
■ Security: The user must have at write access to at least one security group on the
content server
Thanks to everyone for their help. Almost there!
Edited by: lukeb2112 on 18/01/2010 17:30

Payroll cheques posted to GL in PCP0 but not showing on the cheque register (FCHN)

Our Finance is trying to find out what happened with a few Payroll cheques from early 2013. We can see that they were posted to GL 100300 in PCP0, but the cheques are not showing on the cheque register (FCHN).
Does anybody have any ideas to help mefind out where they went or what happened? Would appreciate any advice.

Hi Tatiana,
Possibly that print check program was never run for the employees using transaction PC00_M10_FFOC.
Please note that you will need a check lot and banking configuration set-up done for this transaction to run successfully.
Table REGUH stores information about your pre-dme for each of employee for run number and run identification.
You will need to check table PAYR and see if the employees have entry in it and if they have then if they have check number or not.
Table PAYR is read by check register to find employees' check numbers.
Hope this helps.
If you see check numbers in table PAYR for employee, please verify if you have entered correct selection on selection screen for check register importantly the check box for Payroll Checks is checked.
Also, if possible please send across screenshot of your selection screen.
Thanks,
Ameet

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

Assessable value not maintained for the material X

Dear all,
i have maintained material chapter ID,Plant and materialchapter id combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
Points will be rewarded for useful suggestions.
Thanks in Advance.
velu+91-9789991357

Hi,
Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
Try ME2N.
Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports.

Value not available in the context node

Hi,
I have created one custom component through BSP_WD_CMPWB with only one view called u2018partneru2019 with sample button.
In this view partner ,then created one model context node with reference to u2018 BuilHeaderSearchu2019 search component with only one attribute u201CPartner IDu201D.
When I test the component , WebUI screen shows partner id input box, and sample button. After entering partner id value in the input box, then I am pressing sample button. But entered value not available in the context node. Please help me, how can i get this value?
Kathir.

Hi,
Check the set_method of that attribute and compare with standard.
Regards,
Shobhit

Prices for the characteristic is not showing in the webshop

hi all,
we are facing a strange issue.
When we are trying to select configuration for the configurable product the prices are not showing in
the webshop against each configaration option but when we press the accept button after selecting the configuration the prices are adding automatically to the total.
our actual requirement is we have to show the prices against each configurable part of the configurable product in the webshop.
Whether we have to implement any special IPC user exit for this ?
there is already one standard implementation com.sap.spc.document.impl.userexit.csticValueSurcharge.StandardImplementation
under the CVS type userexit with the std delivery.
Note:we haven't done any custome development in this page of the webshop.
Please help it is urgently needed
Thanks and Regards
shanto allor
Edited by: shanto aloor on Mar 13, 2009 3:49 PM
Edited by: shanto aloor on Mar 16, 2009 1:47 PM

Hi Shanto,
The business requirement you have can be managed by the field catalog.
I think you will have to maintain the value of all possible combinations while you are selecting the characterstics.
You will have to add a field to the field catalog at item level and subsequently included this field in a condition table, access sequence and condition type.
When attributes of field catalog are being passed to IPC, you need to populate this new field by writing a code in BADI CRM_COND_COM_BADI.
Then in the WEB UI the field can be accessed using java code , i think this shud help you.
Wish u gud luck for this assignment.

Value not showing in the transaction MB5T

Similar Messages

Maybe you are looking for