Value of input text field not changed!

hi,
i have a select menu. when i change the value of the select menu, i have the event method and in the event method i change an value of a other input text field, but in the html page, the input text doesn't change his value.
i bind the input text field to the value field in class with the folowing command.
<h:inputText binding="#{backing_main_test:testInputField}" value="#{backing_main_test.testValue}"/>
please help me.
thanks, christoph

<h:inputText binding="#{backing_main_test: <--- was that colon intentional?

Similar Messages

Retain all form field values after input text field validation failure

Hi,
I have a form with 1 input text field, one Command button and one h:selectManyListbox. when User enteres some values in input field and clicks on command button named Add, the value is validated. If input is invalid, then an error message appears next to the field. If input is valid, then the value is added into h:selectManyListbox. Adding to list box is done using Ajax4Jsf.
Probelm:
Let's assume user entered 3 valid values one after another and all are added into the list box. When he enters a wrong value, and error message appears. however, the entered values in list box goes away. Is there a way to retain the values even after validation failure.
Code is given below;
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%>
<%@ taglib uri="http://richfaces.org/rich" prefix="rich"%>
<%@ taglib uri="http://richfaces.org/a4j" prefix="a4j"%>
<h:panelGroup>
     <h:outputLabel for="inputEmailId1" value="Email Id: " />
     <t:inputText value="#{bean.newEmailId}" id="inputEmailId1" maxlength="100" size="40" immediate="true">
          <t:validateEmail message="Enter a valid Email Id." />
     </t:inputText>
     <t:message for="inputEmailId1" styleClass="errorStyleClass" />
</h:panelGroup>
<t:panelGroup style="text-align: left;" >
     <a4j:commandButton value="Add" styleClass="buttonsSub" action="#{bean.addSharedEmails}"
          reRender="inputEmailId1, selectedSharedEmails" />
</t:panelGroup>
<t:panelGroup style="text-align: left;">
     <h:selectManyListbox id="selectedSharedEmails" size="8" style="width:100%;" immediate="true">
          <f:selectItems value="#{bean.sharedEmails}" />
     </h:selectManyListbox>
</t:panelGroup>
Thanks in advance,

Use the attribute "binding" instead of a "value". This will remember the value. You can also make sure that you dont have anything in your constructor or class level that initialises that value to "" or null. Because if JSF is remembering your value but your initialization that gets triggered before the page loading resets it to default values then you need to change that part of the code.

TEXT FIELD NOT CHANGED IN JVA DOCUMENT

Hi Experts,
Have an issue here. When we change a document line item text in a FI document in FB02, the same change is not reflected in the JV document in GJLI. Can you please explain why this happens or if there is a solution for this.
Thanks,
Hari Dharen

Hi,
1. First Check if Text is updated in Material document or not. if not then
Check in system if function module MBCF0002 is activated or not.
if it is activated then code must be written there for Text to flow.
follow SAP Notes 1518592 - Table MSEG-SGTXT is not filled
MBCF0002 exit EXIT_SAPMM07M_001 include ZXMBCU02
2. please check notes 837859 for MIRO Text because there are three differnet Text in MIRO
Hope Help U !
Regards,
Pardeep Malik

How to allow input text field to accept more than one "specific" answer.

Hi,
I am working for something and trying to create a type-box-based quiz for one of my classes, where an input text field can change it's border color if 2 or more words from an accepted word list is inputed.
For example, Say a list has possible answers: R,G, B, Y for the question "Name 2 colors".
I want to create an input text box where the border of the box will change color if any 2 letters (in the above list) are entered into it.
I've tried setting up a variable NumberSuccesses and setting it so that the number increases by 1 for each letter entered e.g.
if (Ex.text == "R");
NumSuc = NumSuc +1; // the var NumSuc has already been defined earlier in the code
If (Ex.text ''G")
NumSuc = NumSuc + 1
if (NumSuc == 2)
Ex.borderColor = 0x0000FF
but that didn't work.. and I tried doing it with another function which I use for multiple input boxes like if there were boxes A, B, C. I could set up a general function where if the correct answers were entered into A, B, an C respectively, only then will say, a checkmark show up using a
EnableCheckmark (); type function. Not sure how to do it if it's the same text input box though. Also just tried adding it into the same function re.
If (Ex.text == "R" + "G")
Ex.borderColor = 0x0000FF
.. Does anyone know what else I can do?

The solution of Nishu with Evaluation Logic:
//These Are the Possible Answers
var solutions:Array = new Array("A","B","C","D");
function testInput(_inputText:String):Boolean
    //the delimiter could also be a comma, here it is a space
    var inputStringArray:Array = _inputText.split(" ");
    var counter:Number = 0;
    for (var i:int=0; i<inputStringArray.length; i++)
        for (var j:int=0; j<solutions.length; j++)
            if (inputStringArray[i]== solutions[j])
                counter++;
    if (counter >=2)
        trace("true");
        return true;
    else
        trace("false");
        return false;
//Textfield with name input_txt on stage
input_txt.addEventListener(TextEvent.TEXT_INPUT, answerTxtInp);
// The function that will be called by the event listener
function answerTxtInp(txtEvent:TextEvent):void
     // depending on the possible answers of characters, change the border color
     if(testInput(input_txt.text)){
         input_txt.borderColor = 0xFF0000;
     else{
         input_txt.borderColor = 0x000000;

How can i validate current row input text field like required.

Hi All,
jdev 11.1.2.1.0
in my use case i have drag drop one viewobject as a adf table. and in table i have also add one extra input text field which is not based on
vo.
now i want to validate current row input text field not null when i commit row.
but when i using required property true. it worked for all row in table. problem is that i want only current row input text field validate not all
thanks,
Manish

When the user tries commit the data by clicking on the button -- For that button, have the logic in the actionlistener method to check if the additional input field is NULL or NOT.
If it is NULL, show an error message using FacesContext.addMessage() API.
Thanks,
Navaneeth

ADF Mobile: How to change the font size of an Input Text field in .amx view

Is there a way to change the font size of the input data (not the label) in a text field? Changing the font size in the Style Font/Text settings doesn't seem to do anything for the label or the value in the input text field. Is this a bug or is there a way to get this to work?

Hi Anna,
depending on the UI element there are a range of ways. (and I'm sure people will post plenty of answers to tell you how).
However, if generically the fonts in you portal/wd applications are too small, you should consider changing your theme so as to have larger texts. Otherwise you will either need to customise all your applications, or you will get quite a lot of inconsistency of presentation between your various WDA applications.
Do a search on "themes for Web Dynpro ABAP" and you'll find loads of resources.
Hope this helps,
Cheers,
Chris

Changing the cursor position in an input text field and Removing leading numeric zeros

Flash8 - AS2
It's good to be back after all these years and thanks for the faithfull folks like kglad, Ned Murphy, Rothrock and all the others who give so much of themselves to make this forum a success!
My Problem:
I have an input text field that is named in the properties box as 'numberOfKids'.
When the program is executed, and a delete or backspace is pressed the input textfield goes blank
and any calculations that use 'numberOfKids' shows NaN.
I have trapped the NaN and undefined so that a numeric 0 shows up instead of a blank.
There are two problems:
First problem:
The cursor is to the left of the zero, so the first number inputted by the user is 10x larger than what they want. 0 becomes 10.
Question: How do I get the cursor to move to the right of the 0?
Second Problem:
When I manually move the cursor to the right of the 0 and input a number, say 4, it shows up as 04.
Question 2: How do I delete the leading numeric zero in the input textfield?
Thanks for the help.
Here's the code I am using:
calculateChildWeight = function () {
if (isNaN(numberOfKids)) {
numberOfKids = 0;
if ((numberOfKids) == undefined) {
numberOfKids = 0;
if (numberOfKids>=0 && numberOfKids<=137) {
numberOfKids = numberOfKids;
} else {
numberOfKids = 0;
if (isNaN(adjustedChildWeight)) {
adjustedChildWeight = 0;
if ((adjustedChildWeight)=undefined) {
adjustedChildWeight = 0;
adjustedChildWeight = Number(numberOfKids*(-100));
//numberOfKids.setSelection(numberOfKids.length, numberOfKids.length);
//if (numberOfKids.length=2 && numberOfKids<10) {
// remove the first character or leading zero
// numberOfKids = numberOfKids;

Thanks Rothrock for being so patient.
I'm lost!
I go back to a brand new flash file to try and implement the textfields as a stand alone test document. I have lost the concept I think.
I created on the stage of a blank .fla file 4 text fields, 2 input and 2 dynamic. I gave them an instance name in the properties box. I use this instance name.text to find the value of the field. I use the parseInt to put that value into a numeric variable for calculation. The results are put to the appropriate textfield.
All seems to work except one of my input text fields. I use the value of this field to calculate:
revisedValue = parseInt(numberOfKids.text);
revisedValue = revisedValue*(-100);
The problem now is that if the numberic '2' is inputted into numberOfKids, numberOfKids.text shows up as 200 and a trace shows up as '2NaN'.
Flash is logical and consistant, I must conform to it but I'm in the dark.
(( Concerning the forum: If I click on helpful, which your posts have been in directing me, does that blank out the possibility of selecting the correct answer in the future???))

How to insert a date picker input text field in a JSF Jsp page

Hi,
I have to develop an application using generic facets, unfortunately I am not supposed to use ADF Faces components given by Oracle.
Now my requirement is, on JSP page an input text field which holds a DATE value is required, it should also have a Date Picker Calendar adjacent to it.
Could you pls shed some light on this issue and help me out.
Thanks
~Siva(ji)

<HTML>
<script language="JavaScript" type="text/javascript">

</script>
<BODY
<button id="c1" onclick="cstmPup(c1,pUpCstm)">Custom PopUp</button>
<'div' id="pUpCstm" style="display:none;">
<'div' id="myid" align="left" style=" width:100%; height:100%; background:#cccccb; border:1px solid black; border-top:1px solid white; border-left:1px solid white; padding:10px; font:normal 10pt tahoma; padding-left:18px "> <b>Rich Message Boxes</b>
<hr size="1" style="border:1px solid black;">
     <div style="width:220px; font-family:tahoma; font-size:80%; line-height:1.5em"><br>
          <table border ="1" id="myTable">
               <TR>
                    <TD> SUN </TD>
                    <TD> MON </TD>
                    <TD> TUE </TD>
                    <TD> WED </TD>
                    <TD> THU </TD>
                    <TD> FRI </TD>
                    <TD> SAT </TD>
               </TR>
          </table>
     <br><br>
     </div>
     <br>
     <div>
<button tabindex="-1" onclick="hPopUpc()" style="border:1px solid black; border-left:1px solid white; border-top:1px solid white; background:#cccccc ">Close Message</button>
</div>
<?BODY
</HTML>
Message was edited by:
mchepuri
Message was edited by:
mchepuri
Message was edited by:
mchepuri

Paging a data table with input text fields

I've created a datatable with input text fields so that contents can be edited. I have 'save' and 'cancel' buttons on the page so that changes can be saved or abandoned. That seems to work fine.
However, I have a problem with paging. If I modify an input text field, page to the next page in the datatable and then page back, the modified input text field reverts to the original entry in the database. Does anyone know how I can preserve this change (without issuing a commit) until the user clicks on the save button?
Here is a snippet of jsp with datatable.
<h:dataTable binding="#{DocTypeDetail.doctypeMetadataTable}" headerClass="list-header" id="doctypeMetadataTable"
rowClasses="list-row-even,list-row-odd" rows="5" style="left: 240px; top: 312px; position: absolute"
value="#{DocTypeDetail.doctypeMetadataTableModel}" var="currentRow">
<h:column binding="#{DocTypeDetail.column2}" id="column2">
<h:inputText binding="#{DocTypeDetail.textField1}" id="textField1" value="#{currentRow['name']}"/>
<f:facet name="header">
<h:outputText binding="#{DocTypeDetail.outputText5}" id="outputText5" value="Name"/>
</f:facet>
</h:column>
<h:column binding="#{DocTypeDetail.column3}" id="column3">
<h:inputText binding="#{DocTypeDetail.textField2}" id="textField2" value="#{currentRow['value']}"/>
<f:facet name="header">
<h:outputText binding="#{DocTypeDetail.outputText8}" id="outputText8" value="Value"/>
</f:facet>
</h:column>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header"/>
<f:facet name="header">
<h:panelGroup binding="#{DocTypeDetail.groupPanel1}" id="groupPanel1" style="display: block; text-align: center" styleClass="list-paging-header">
<h:commandButton action="#{DocTypeDetail.doctypeMetadataTable_firstPageAction}"
binding="#{DocTypeDetail.doctypeMetadataTableHeaderFirstButton}" id="doctypeMetadataTableHeaderFirstButton"
image="resources/paging_first.gif" immediate="true"/>
<h:commandButton action="#{DocTypeDetail.doctypeMetadataTable_previousPageAction}"
binding="#{DocTypeDetail.doctypeMetadataTableHeaderPreviousButton}" id="doctypeMetadataTableHeaderPreviousButton"
image="resources/paging_previous.gif" immediate="true"/>
<h:commandButton action="#{DocTypeDetail.doctypeMetadataTable_nextPageAction}"
binding="#{DocTypeDetail.doctypeMetadataTableHeaderNextButton}" id="doctypeMetadataTableHeaderNextButton"
image="resources/paging_next.gif" immediate="true"/>
<h:commandButton action="#{DocTypeDetail.doctypeMetadataTable_lastPageAction}"
binding="#{DocTypeDetail.doctypeMetadataTableHeaderLastButton}" id="doctypeMetadataTableHeaderLastButton"
image="resources/paging_last.gif" immediate="true"/>
</h:panelGroup>
</f:facet>
</h:dataTable>

I know by now you must have figured it out. If not you might want to try keeping the backing bean in session instead of request scope.
Hope that helps,
HeMan

Text Fields Not Showing in Design or Live View

Hello Everyone,
I have run into a problem trying to create a simple contact form through Dreamweaver CS6. I have two text fields for Name & Email, and 1 text area for Comments. The issue I am running into is that the text fields are not showing in Design or Live view. I have set-up all variables required for the server for the form to work... but that should not have any effect on the text field showing... I tried uploading my contact page with the same result of no text fields showing...
What is really laughable is that the "text area" I placed in my form for Comments shows up in Design & Live view just fine. I am thinking that I am missing something, but just do not know what exactly. The form is styled through CSS.
Here is the form code:
     <div id="CRDForm">
       <form action="http://www.sweetformimi.com/formmail/formmail.php" method="post" enctype="application/x-www-form-urlencoded" name="contact" target="_self" id="contact">
    <input type="hidden" name="env_report" value="REMOTE_HOST,REMOTE_ADDR,HTTP_USER_AGENT,AUTH_TYPE,REMOTE_USER">
    <input type="hidden" name="recipients" value="[email protected]" />
    <input type="hidden" name="subject" value="Contact Form" />
         <label><p>Your Full Name
           <input name="Name" type="text" id="Name" size="40" /></p>
         </label>
         <label><p>Email
         <input name="email" type="text" accesskey="2" tabindex="2" title="Email" value="Email"></p>
         </label>
         <label>Comments<br />
         <textarea name="comments" cols="40" rows="10" accesskey="3" tabindex="3" title="Comments"></textarea>
         </label>
         <input name="submit" type="submit" accesskey="4" tabindex="4" title="submit" value="submit">
       </form>
    </div>
Are there other variables I should be thinking about in the rest of my site? I am using a fluid grid layout. I have CSS for desktop, tablet, and phone devices. I also have a primary CSS file that imports all three. The sites structure was done by using <header>, <article>, <footer>, and of course <div> tags.
Has anyone ever experienced the "text fields" not showing up before? Is it a simple fix as reinstalling Dreamweaver CS6? Finally, another thing I should mention is that I did have a previous version of Dreamweaver on my comp, which was CS3. I did not uninstall that before installing the newer version. I assumed (and I could be wrong here) that it would automatically replace the older version.
I apoligize for it being long winded, but I am looking for some help on this issue...
Thank You

Hey thank you osgood for the reply!
When I look at code for long hours it sort of blurs together, and I miss things... I think that happens to the most of us
Ya I found what was blocking my text fields in my desktop.css
I primarily work through code view, and currently working on quite a few projects kind of makes your eyes miss the small errors.
Thanks again!

How to add comma and dollar sign that places automatically in input text field

I have this ROI calculator which has several text input field
on frame one with calculate and reset buttons. When a user enters
numerical values in the text field, and jumping to the next field,
I want the input text filed be updated with dollar sign and with
comma.
Next when they hit "ENTER" key or click "Calculate ROI"
button, all the input text fields on frame 2 as a result of
calculations be updated with dollar sign and comma. I also need
that once the comma sign is assigned then it would not add any more
even if user presses the button. Can someone help me in
this?

If you want to Set the Comma when you Switch to next Text
Field
Use onKillFocus / onSetFocus Functions.
to restrict multiple comma, Before Adding comma use
myText.text =
myText.text.split(",").join("").split("$").join("");
So this will give you the value without Comma and Dollar
symbol, Now add the Comma and dollar.
or you need to use a Flag for onChange Event.

Can we hide the real value of input text box and show other value in ADF?

Hi All,
I have a table in which i have one the column as "Quantity" and text box as "quantity" :-
<af:column sortProperty="quantity" filterable="true"
sortable="true" headerText="Quantity" id="c3"
width="60"
rendered="#{row.bindings.booleanFlag.inputValue != 'E'}"
filterFeatures="caseInsensitive">
<div align="center">
*<af:inputText value="#{row.bindings.quantity.inputValue}"*
label="#{bindings.queryProductResponseType.hints.quantity.label}"
required="#{bindings.queryProductResponseType.hints.quantity.mandatory}"
columns="#{bindings.queryProductResponseType.hints.quantity.displayWidth}"
maximumLength="#{bindings.queryProductResponseType.hints.quantity.precision}"
shortDesc="#{bindings.queryProductResponseType.hints.quantity.tooltip}"
id="it5" partialTriggers="it19"
readOnly="#{row.activeYN == 'N'}">
<f:validator binding="#{row.bindings.quantity.validator}"/>
<af:validateRegExp pattern="^[1-9]+[0-9]*$"
messageDetailNoMatch="Quantity must be in whole number format."/>
</af:inputText>
</div>
</af:column>
Now when the user will enter say 400 in input text box "quantity" , the value should be divided in the same row to other column text box say "conversion" which holds the value as 40 , so if the division doesn't give any remainder(means remainder =0 ) means real value(400/40) = 10 then it should set the value of input text box "quantity" as 10 but the user should be able to see 400 which he/she entered before, as we want to send the 10 as request but we have to show 400 to the user and if remainder goes greater than 1 than it should show an error.
I have to implement this in value change listener of the text box as i need to calculate the real value each time for a row.
How should i implement this ?
Thanks .
Thanks.

Thanks timo,
But can you give me full details how should i implement this as i am newbie to ADF. I have found the data control in Data controls tab in left hand side and right click on it -> edit definition -> but it does not give me the option to add attribute , it just give me the option to edit the existing attribute. Can you explain me how to add the transient attribute and how to implement it ? Any sample code snippet ?
Thanks.
Edited by: user13644804 on May 15, 2011 10:09 AM
Edited by: user13644804 on May 15, 2011 10:09 AM

Input text field displays U.S. keyboard layout

Hi,
I've got a Flash Player 9 / AS3 animation which has a input
text field where a user enters their email address.
Now my PC is setup to use the UK keyboard layout so when I
click the buttons Shift+@ then I get the @ symbol displayed.
But for some reason the moment I try typing in the @ symbol
(using Shift+@ keys) then up pops the " symbol which is a U.S.
keyboard layout if I'm not mistaken?
And so checking this, if I use the Shift+number 2(") key then
I get the @ symbol (which again is a U.S. keyboard layout if I'm
not mistaken?).
Obviously I can't expect my UK users to know this and so need
to work out how to change the keyboard layout for the text input
fields so when I click the shortcut buttons Shift+@ I should see
the @ symbol appear.
Hope that all makes sense.
Any help is greatly appreciated as this is a live project
that the client is racing to get fixed.
Many thanks and kind regards,
Mark

Hi,
I have found some other weird things happening regarding this
issue which are very odd?
To recap....
If I type into the search bar at the top of this page Shift+@
then I get the correct character displayed which is @ (so my
keyboard is definitely UK layout).
If I create a new Flash movie with nothing but a text field
set to INPUT and type Shift+@ then again I get the correct
character!
But if I type Shift+@ into my Flash movie I get the wrong
character " appear!?
I then checked both text fields and found there were
absolutely no differences (except for colour/font size), so I
copied the new text field into my Flash movie and the moment I
played my Flash movie the new text field (which was working) then
started doing the same and displaying the wrong character???
Any ideas?
Thanks.
Kind regards,
Mark

Invalid text value. A text field contains invalid data. Check the value and try again

Hello,
I am having a problem with the error mentioned in the title. I see alot of others have experienced the same problem, but I have quite a twist to it.
I see the problem when I try to edit a list item, and then try to save the changes.
Here what I see in the ULS log:
System.Runtime.InteropServices.COMException: Invalid text value. A text field contains invalid data. Check the value and try again
at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId,
Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter
pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)
at Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean
bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback,
ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback)
I have 3 front end servers(fx wfe1, wfe2, wfe3). And here is the twist.
If I access the library directly through wfe1 and wfe2, I get the error. If I access the library via wfe3 if works just fine.
So because of this, I think it is safe to assume that is has nothing to do with the character limit of 255. Nor does it have anything to do with the field type, since it is already set to mulitible lines of text.
So. Any ideas?
Regards,
Michael
mic

Check if there is any change in web.config of these servers
http://support.microsoft.com/kb/2880758
To work around this issue, limit the length of the personal message in the invitation to 256 characters or less.
This is a known issue. Microsoft is working to resolve this issue.
http://social.msdn.microsoft.com/Forums/en-US/7bb16e51-e7cc-439e-a8b3-755683ccac1a/max-length-on-custom-field-types
To solve the problem you may have to change the field's parent type to "note". To do that you have to open your fldtypes... file under Templates/xml and change the line to:
"<Field Name="ParentType">Note</Field>" from "<Field Name="ParentType">Text</Field>"
You might also have to add a sql type if your text needs to be longer than 255 characters
<Field Name=”SQLType”>ntext</Field>
and inherit from SPFieldMultiLineText instead of SPFieldText
If this helped you resolve your issue, please mark it Answered

How Can i send the data entered in Input text fields to e-mail?

Iam Jennifer, Iam having a doubt in Flash, I hope that you
are going to solve my problem, Iam taking 3 Static text fields as
Name, Age and Country and besides each and every static text fields
i have taken 3 input text fields with different instance names,
when i enter my Name, Age and Country details in the input text
fields and after entering those details if user clicks the submit
button the data should be send to some mail address, is it possible
Im not so good at action script, but i hope that any one can
help me...
Iam attaching the action script code also, please find the
attachment below, the actions are given to button.
Attach Code
Btn.onPress = function ()
mail_lv = new LoadVars();
mail_lv.dummy1 = "";
mail_lv.subject = "Details";
mail_lv.message = "hi";
mail_lv.username = "name_txt".text;
mail_lv.age = "age_txt".text;
mail_lv.country = "country_txt".text;
mail_lv.onLoad = function ()
trace("Sent successfully...");
trace("mail_lv.subject = " + mail_lv.subject);
trace("mail_lv.message = " + mail_lv.message);
mail_lv.send("mailto:[email protected]", "_blank");

The names of your variables, "name_txt", for instance, should
NOT have quotes around them. Use:
mail_lv.username = name_txt.text;
mail_lv.age = age_txt.text;
mail_lv.country = country_txt.text;

Value of input text field not changed!

Similar Messages

Maybe you are looking for