Variable currency on query level (not KYF)

Hello,
I'm currently looking for an easy way to get a variable screen with one currency selection entry for all query amount key figures. Till now I used an own currency translation type with a target currency from a variable. But this I have to assign to every key figure in my query.
Isn't it possible to set such a variable currency on query level and not on key figure level?
Thanks for your help.
Frank

Hi
I dont think whether there is a way to maintain currency translation at the query level.But you can map them to a fixed target currecy in mapping in the update rules itself....which will be universally available for you in the same currency in all the queries.....if you want specific to queries....i dont think there is a easy way
Assign points if useful
Thanks
N Ganesh

Similar Messages

Local Currency At query Level

Hi All,
Is their a way to permanently set local currency at query level. Or do we have to set the currency conversion on all the fields.
Kind Regards
James

Yes,You will have to set at each KF at query level.But if you want for all the KF's at one shot,you may have to do the currency conversion for all the KF's at backend cube level in transformations.
Is this conversion based on the current day at query level?, if so, the cube level calculations would not be right since the cube data will get conversions based on that days load.

Variables defined in Query designer not affecting the web template

Hello,
I have some variables defined in a query, through Bex query designer.
The selection screen to enter the values for the variables pops up when excuted on the web or in excel .
But the variable selection screen does not pop up when i execute a web template where in i defined with the same query.
Please suggest me why it is happening so..

In WAD check in the General Properties whether you have unchecked the Force Variable Screen On Checkbox
Other thing to check is whether you have personalized the selection screen??? After Executing the Report go to selection screen by clicking on the Variable Screen option. To the left side of each variable you can see the personalization icon. right click on that and select delete personalization.
Hope this helps.

Change S/C Currency, at Header Level Not Item Level

Hello,
We have a requirement for a requisitioner to be able to purchase for two different companies with different currencies. However, when the requisitioner creates a shopping cart, the shopping cart header defaults to the default currency and cannot change it. The company and currency can be changed at the item level but not the header.
Has anyone encountered this requirement? If so, how did you handle it?
Regards, Dean.

Technically, there is a header, not a header like EKKO. There is a S/C header that contains the S/C guid, curreny key and other S/C information. The tables involved are CRMD_ORDERADM_H and BBP_PDHGP.
In the BBP_DOC_CHANGE_BADI that was mentioned above, was already considered as a place to make the currency change since structures IS_HEADER and ES_HEADER are available for processing.
I was hoping for a better solution that having to do alot of coding.
Regards, Dean.
Edited by: Dean Hinson on Apr 29, 2008 7:10 PM

How to Hide Unit Currency in Query Display

Hi to all,
I have created Query for Receivables .
wheher i am using 0FI_AR_4 as datasource and 0CREDIT_LC as Credit amount in local currency and using 0CREDIT_LC at query level as Key Figure.
Now when i display Query in RSRT or PORTAL , 0CREDIT_LC is display with Unit Currency.
example      ;
                             2100 INR              3500 INR         2300 INR
I need that only value should display not Unit Currency at query level.
example      ;
                             2100             3500         2300
Please can nay one help we with that.
I shall be thankful to you for this.
Regards
Pavneet Rana

Hi,
Please create a calculated key figure and use the function NODIM
so you have will have a new calculated key figure = NODIM ( cube key figures)
Note - this will be fixed for this query.. you will not be able to change it at the report level... units can only be seen if you remove the NODIM

Currency Conversion at Query Level

Guys,
Can some one tell me step by step procedure to do Currency conversion from USD to Mexican PESO at query level in BI 7.0. I have read lot of threads but not clear in maintaining the Exchange rates and also in creating the variables.
Thank you,
Kumar

Hi Kumar ,,
You're able to convert the currency amount on the routine ...
Using this function :
CONVERT_TO_LOCAL_CURRENCY
Sample:
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
     EXPORTING
        DATE             = " current date.
        FOREIGN_AMOUNT   = " local currency amount (peso)
        FOREIGN_CURRENCY = " local currency
        LOCAL_CURRENCY   = 'USD'
     IMPORTING
        LOCAL_AMOUNT     = RESULT " result.
     EXCEPTIONS
        NO_RATE_FOUND    = 1
        OVERFLOW         = 2
        NO_FACTORS_FOUND = 3
        NO_SPREAD_FOUND = 4
        OTHERS           = 5.
To maintain the exchange rate, you can go to tcode: OB08
Hopefully it can help you a lot..
Regards,
Niel
thanks for the points you choose to assign.

Query level formula is not working for all the amounts

Hi Friends,
In my production system I found new thing that in my query level I done some calculation (as per my requirement I done amount devide by 100 to get correct values)
It is working for all the amounts except 1or 2 amounts, im uploading same source file for all the amountsu2026 why it is happening like this u2026and is there any availability to change those 1 or 2 values at data base tables level or at any pleace (I hope in SAP it is may not possible)u2026can any body tell me why it is happening like this. u2026 because of this issue only my report is pending to sign off u2026.please can any body find the solution ASAP.
Regards,
VENKAT

Are they non decimal currencies?
If yes, create RKF1 on amount field excluding the currencies for which you are not getting currect values then in CKF or formula as RKF1 / 100. Similarrly create another RKF2 on amount only including the currencies which are excluded in RKF1, create a CKF or formula as RKF2/10000. Then created another formula wich adding CKF1 and CKF2.

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

The SharePoint list query is not valid: Data at the root level is invalid. Line 1, position 1. (rsSPDataProviderError)

Hi there,
All my reports are throwing below error in a sharepoint site configured with Access services. Does anyone have a clue what's causing it?
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'Default'. (rsErrorExecutingCommand)
The SharePoint list query is not valid: Data at the root level is invalid. Line 1, position 1. (rsSPDataProviderError)
Thanks
Manvir

Hi Manvir,
For troubleshooting your issue, please go to C:\Inetpub\wwwroot\wss\VirtualDirectories\ find your Web Application (represented by a port number), then delete an unknown folder created by sharepoint, namely vti_cnf from all the folders and sub-folders in
your web application.
Reference:
http://forums.asp.net/t/985790.aspx?Data+at+the+root+level+is+invalid+Line+1+position+1
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Info object not found at query level

Dear Experts,
I have a issue in concern of Query dsigner. I have designed a query on the basis of ODS & i is working fine on dev system. Then i transport the same query on the QAS system, when i executed the same on QAS syste, it gives an error Characteristic BAS: Place Name was not found in InfoProvider when I analyse the same i found that the query is not able to find one field. then I check the same field in ODS, but the field is available in ODS. I am not able to find out the solution or other way that why this type of error is coming.
I also re transport all the things but still getting the same error.
thanks in advance
Neha

Hi Neha,
Try re-importing(with overwrite mode) the query once in QA and if the error still persists, collect the query once again and transport it to QA.
I'm saying this because you have made enough checks at all levels, hence try this option.
if structure of the DSO's in both the systems are identical and if you transport the query once again...the error should be fixed.
if the structures are not indentical or any of the objects are inactive then you may face the problem. consider all these things before collecting the query.
Regards,
Sudheer.

When using TODATE function MDX query is not correctly generated

Essbase 9.3.1.2 and OBIEE 10.1.3.4.1.
When using TODATE function MDX query is not correctly generated.
This leads to unexpected values not only on cumulative columns in report (generated with TODATE), but also other columns (calculated with AGO function or directly read from cube) have incorrect values.
The problem occurs when you filter on a column that is not in the select list. If you filter on just one level of dimension, results are fine. You can filter on multiple dimensions as long as you filter on just one level of each dimension.
If you filter on two or more levels of one dimension, than results are not correct. In some cases results for TODATE column are all zeros, in some cases it is a random value returned by Essbase (same random value for all rows of that column), and in some cases BI Server returns an error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Network error [10054]: Cannot Send Data (HY000).
Here is generated MDX code:
With
set [Grupe proizvoda2] as '{[Grupe proizvoda].[N4]}'
set [Grupe proizvoda4] as 'Generate([Grupe proizvoda2], Descendants([Grupe proizvoda].currentmember, [Grupe proizvoda].Generations(4), leaves))'
set [Segmentacija2] as '{[Segmentacija].[RETAIL]}'
set [Segmentacija4] as 'Filter(Generate({[Segmentacija2]}, Descendants([Segmentacija].currentmember, [Segmentacija].Generations(4),SELF), ALL), ([Segmentacija].CurrentMember IS [Segmentacija].[AFFLUENT]))'
set [Vrijeme3] as '{[Vrijeme].[MJESEC_4_2009]}'
member [Segmentacija].[SegmentacijaCustomGroup]as 'Sum([Segmentacija4])', SOLVE_ORDER = AGGREGATION_SOLVEORDER
member [Accounts].[MS1] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],2,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS2] as '(ParallelPeriod([Vrijeme].[Gen3,Vrijeme],1,[Vrijeme].currentmember), [Accounts].[Trosak kapitala])'
member [Accounts].[MS3] as 'AGGREGATE({PeriodsToDate([Vrijeme].[Gen2,Vrijeme],[Vrijeme].currentmember)}, [Accounts].[Trosak kapitala])'
select
{ [Accounts].[Trosak kapitala],
[Accounts].[MS1],
[Accounts].[MS2],
[Accounts].[MS3]
} on columns,
NON EMPTY {crossjoin ({[Grupe proizvoda4]},{[Vrijeme3]})} properties ANCESTOR_NAMES, GEN_NUMBER on rows
from [NISE.NISE]
where ([Segmentacija].[SegmentacijaCustomGroup])
If you remove part with TODATE function, the results are fine. If you leave TODATE function, OBIEE returns an error mentioned above. If you manually modify variable SOLVE_ORDER and set value to, for example, 100 instead of AGGREGATION_SOLVEORDER, results are OK.
In all cases when this variable was modified in generated MDX, and query manually executed on Essabse, results were OK. This variable seems to be the possible problem.

Hi,
Version is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
Sorry, in my last post i forgot to mention that i already created a function based index but still it is not using because, there is a UNIQUE constraint on that column.
Thanks

Date to Month Conversion at Query Level.

Hi,
I have Net due date in the Info provider.
At query level i have to create a restricted keyfigure based on Net Due Month.
Is there any way i can calculate Net due month at runtime and then create the restricted keyfigure using the net due month instead of using net due date directly(linke 01-10-2010 to 31 -10-2010 for october 2010).
Thanks and Regards,
MuraliManohar.

Hi,
Is there any way i can calculate Net due month at runtime and then create the restricted keyfigure using the net due month instead of using net due date directly(linke 01-10-2010 to 31 -10-2010 for october 2010).
you can calculate , but as he said you can add in cube , may be for cal month you are taking som eother date field.
in this case write one customer exist code .
create one varaibel on netdue date with customer not ready input (if user wants to enter input then ct=reate user entry varaible with reday input by using customer exit).
in routine wriet the code as when that varaible .
l_s_range - high , low and give then take the month form that date
like netdue date +0(6)-- gives month and year
netdue date +0(2)-- gives month
then rtestrict that variable with your keyfigure.
Thanks & Regards,
sathish

OBIEE 11g : query log not found

Hi,
I am not able to see the query log in 11g answers manage session throwing error query log not found.
I am using obiee 11g. 11g admin client is installed in local machine and I upload the rpd through enterprise manager. But I can not able to open the rpd in online mode that's why cannot change the query log level=2 (as in obiee 10g) for seeing the query log in Answers. Usually after making changes in 11g rpd, I upload that in server via enterprise manager console.
Can anyone please tell me what should be correct option to see the query log and how I can open the rpd in online mode and how I can set the query log level in obiee 11g????
Please help.
Thanks
Titas

Hi,
Its known bug and it can be done by below methods,
Method1:
If you enabled loglevel for each users wise it may be override with below place also can you confirm both places.
enabled Tools-->Options-->Repository-->
System log level by default will be 0 just try to increase to 2 or 3 and save it.
Method1:
by each report wise enabling loglevel
try putting the below syntax in prefix section of advanced tab.
SET VARIABLE LOGLEVEL=2,DISABLE_CACHE_HIT=1;
It should generate the log with database sql as well.
Method 3:
Create Session variable(LOGLEVEL) with initblock
in your init block --> datasource place put it like below query
select 3 from IW_POSITION
Note:just point any existing physical table from u r RPD.
Then try to save it and test it.
Refer screen
http://bidevata.wordpress.com/2012/03/03/no-log-found-error-in-obiee-11g/
Thanks
Deva
Edited by: Devarasu on Oct 11, 2012 11:44 PM

How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?

Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori

Variable of copied Query changes the original Query - variable

Team:
I have a Query "A". Then, I made a copy "B". Both Queries are the same definition, including the variables. In the Query A, there is a variable "ZWWW" that checks the date entered by the user. In the user exit I_step = 3, we check for the validity of the date entered. Unfortunately, we need to test the Query in QAS, which we do not need to test the validity of the data. Thus, we changed the variable to be "YYYYY" on the Query B.
Unfortunately, this new variable "YYYY" somehow is reflected automatically in the original Query A. This issue is only present if the Query B is a copy of Query A. Basically, the Query A and B have different technical names and UIDs. However, they are in the background related.
The question is: how can I change the variable on Query B without affecting Query A.

Hi Raul,
Variables are at
Query Filter Level
RKF Level..which is Global
What i understand is that this Variable of Query is in the RKF - which is GLOBAL.So if we change the RKF Variable on that Multiprovider... for not just Query A... ...it will change across all the Queries not just Query A or B.
We will have to identify the RKF1 and create a copy of the RKF1 as New RKF2 and replace the old Variable with the New One YYYY.
Hope this Clarifies.
rgds
SVU

Variable currency on query level (not KYF)

Similar Messages

Maybe you are looking for