Variable entry issue when the query is executed on the WEB

Hi,
       When I execute a 2004S query on the WEB,In the variable entry screen , even if I specify for example 'A' for a variable , the 'A' is completly ignored and it returns all the values.So there is a problem with '*'.
        If I execute the same query in the Analyser, '*' is considered while returning the results.
        Anyone having similar issue.
        Thanks in advance.

Hi siva,
Its a program error. Please apply the advanced correction from SAP note <a href="https://service.sap.com/sap/support/notes/1062214">1062214</a>
Assign points if helpful,
Regards, Uday

Similar Messages

How to ignore a variable defined in a query when the query gets executed

Hi SAP guru, I am creating a query, which has a user input variable, say A, and a replacement path variable, say B, Bu2019s value is determined by A and the whole purpose of A is letting user entering an initial value and A must be ignored when the query gets executed. How can I achieve this in query designer?
Thanks

Hi, thanks for the reply. Actually this is not my problem. My problem is the query should be filtered by a variable, say B, but B is not allowed to be entered directly by user (i.e. B could be a replacement path variable or user exit type). So B has to be derived from another user input variable, say A. However if I defined A in the query, A is by default used as one of the filters, which is not desirable because A is a subset of B in my case and should be ignored.
Is there options (settings) that allow the query ignore a specified variable (A) ? If not is there other ways to get around this?
Thanks
MichScott

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder? Thanks! bedrijfsfilm Companyfilms

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?"

How to config the user and role in the runtime for executing in the GP?....

Hi Experts,
I am learning GP(Guided processor)according the document
http://help.sap.com/saphelp_nw70/helpdata/en/44/0d5b8f250d5cfae10000000a155369/frameset.htmneed.
I meet two question when I learn the GP.
The first:
This document don't tell me how to config the member framework of the company. After I design the GP, I have to config the user and role in the runtime for executing. I hope I can use the WDA(webdynpro for java or webdynpro for java) to implement to config the user for executing in the runtime. Thus, the customer don't config the user when runing the GP. But I don't know how to do this.
I need a document guide step by step to tell me how to do this.
The second:
If I use the workflow in the GP, I have to install and config the NWDI(Netweaver Development Infrastructure). Now I have installed the NWDI, but I don't know config it so that I can download it to my machine for develop the workfolw in the GP.
Do you give me some hints? Thanks a lot.
Thank a lot.
Best regards,
tao

Hi, Mithu,
Thanks a lot for your help in advance.
I have carefully read the document: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5.
Now, I think I have to set the processor of every actions in every process if I use the GP for processing the workflow.
I am better to hope that I can set the processor to the role for every actions in every process in the runtime through get the organizational structure in the WDA(webdynpro for java or webdynpro for java). Thus, the customer don't set the processor to the role for every action in every process when runing in the GP. I don't know how to do this.
Whether the function is not supported in the GP? If so, I have to config two organizational structure: in the R/3 and in the Portal. I don't think our customer don't receipt this solution.
Do you give me some hints? Thanks a lot. My email: [email protected]
Thanks again.
Thanks & Regards,
Tao

URGENT HELP:I want that the query should return in the same way

I have a query
select id from tableid where id in(350,241,251)
This returns me in
241,251,350
I want that the query should return in the same way as specified in "in" clause.
ie output should be in 350,241,251.
I would really appreciate if anyone can help.

You can achieve what you want like this:
select id from tableid where id in (350,241,251)
order by decode(id,350,1,241,2,251,3)in this example the decode explicitly defines the order you want to retrieve the records in.

Aggregation Issue when we use Hierarchy InfoObject in the Bex Query.

Hi All,
      I have created a bex Query having some Char's and one hierarchy Infoobject in Rowa and RKF's. I haven't used any Exception aggreagation Objects in RKF. but, when I execute a query in the Over all result it's showing the Exceptional aggregation based on the Hierarchy Object.
Briefly Illustrated my problem here.
OrgUnitHierarchy     EmpID       RKF
Root                          1                1
RootA1                     1                1
RootA2                     1                1
Root                          2                1
RootB1                     2                1
RootB2                     2                1
Root                          3                1
RootC1                     3                1
RootC2                     3                1
Over all result                              3
In the above example the Sum of the RKF is 9. but its showing only 3. When I Connect this with crystal report is the sum of RKF is showing 9. Please help me which is the correct one and why it's not aggregating child nodes?
Is there any Config needs to be done to aggregate all the nodes of the Hierarchy? Thanks for your support in advance
Regards,
Shiva

Hi,
is this related to BEx Analyzer or BEx Web Reporting ? if so then I would suggest to post the entry into BEx Suite forum as this forum is for the SAP Integration Kit from BusinessObjects.
Ingo

Paramerterized Interactive Reports - is there a quick solution to stop the query from executing when entering the page prior to user clicking go.

Example
Currently, when the user enters the page the interactive report runs (without the user hitting "go")and - indicates no data found because one of the "parameterized" fields is required and the sql is not setup for nulls.
I'm Looking for a way to not perform a query at all -------until the user hits go for the first time on the page - then each time they re-enter the page in the same session it would be ok to auto submit the query.
I believe I can setup a hidden item and check on my interactive report E1 not null. Then create a "computation" on "after submission" that would set this value to a value - say 1.
I can seem to be able to get this to work however.
In my interactive report - I'm wondering what "condition type" should I be using. Any thoughts would be greatly appreciated.

In this case I just have 2 parameters. The goal is to allow the user to "pre filter" BEFORE rendering the interactive due to the possible size of the report. This pre fliter could be by say- order type or region or branch etc.
Right now, I believe its all one region - see below.
My first attempt, I put a branch on the after submit on the go button and then put a condition on the interactive report. This worked but caused a looping issue when trying to select a column on the interactive report itself. My guess is , because that drop down was also using that same go button.
Anyway, please advise how to best "pre filter" prior to rendering an interactive report. Should I have two seperate regions or can I use one region. Any assistance would be greatly appreciated.
Order Parameters 2
Before Header
Branches
Computations
Processes
After Header
Computations
Processes
Regions
Before Regions
Computations
Processes
Regions
Body (3)
Search
Items
P6_TEXT
P6_ITEM_NUMBER
Region Buttons P6_GO
Order Type &P6_TEXT
Report Columns
Order Type
Operating Unit
Order Number
Line Number
Item Number
Invoice Week
Items
P6_NAME
P6_ITEM_NUMBER_ALT
Position 01 Breadcrumbs
After Regions
Computations
Processes

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

[Execute SQL Task] Error: Executing the query failed with error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION."

I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRaj

To avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha

VO substitution Issue when any person is associated to the userId.

We have done a customization to a seeded table by adding new columns. But it throws an exception "Invalid Column Index" in the scenarios mentioned below:
1. When any person is associated with the user.
2. When the view type is filtered with any 'Project Manager' to get the list of projects.
Rest in all cases its working fine. If any of you had faced similar issue, please share your inputs. Its very urgent.
thanks,
Danish

We have done a customization to a seeded table by adding new columns. But it throws an exception "Invalid Column Index" in the scenarios .
"table" is it database table or OAF classic/adv table region?
--Parag Narkhede

How to make this query executable in SSRS: The query cannot be prepared: The query must have at least one axis.

WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
} ON COLUMNS,
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
)} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]

Hi Ramparasad,
In your query, you add a measures and dimension on Row axis which is not supported in query designer in SSRS. Please use the query below.
WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
}ON COLUMNS,
{ [FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]
Regards,
Charlie Liao
TechNet Community Support

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

How to find the query name by seeing the program name?

Hi,
i have one auto generated program in production AQCSPU==========ZPSPOWHO======
Now user executing this program by taking help of se38 and sa38 t-code.But now suddenly sa38 and sa38 access blocked for the user so thay are now unable to execute the above program(which was a report).
They are asking to craete a t-code for this program.How to do it? because in dev. system this program doesnot exist.
Please help regarding this issue.

Hello,
Sanjoy Ghose suggestion is a good one. It should work.
However i would advice that you download the query and infoset from your production system and then upload in your development system. Then assign the Tcode and move it across production. The advantage being that tomorrow if authorization for creation/changes in queries is taken our in production then you have a development copy to work on.
Use program 'RSAQR3TR' to download the query and the infoset.
Thanks,
Neeraj

Bica: change the query cause error in the pas model

Dear friends,
We have very simple scenario: one query 'SSM_SQL_KPI_MAY'' for feeding the pas model- 2 demensions and 2 measures. With this query I load the schema and data to the pas model.Everithing was fine. After that we added new dimension to the query.Ichanged the existing query and load the data with bica.But when I try to open the model I get the next error every time
DAT316:
No internal Dimenson unique name to position cache exists for 'EZOR_KEY' on Linkid 'BI' Cube 'SSMKPI/SSM_SQL_KPI_MAY'
We try to resolve the issue by deleting data and schema but every time I get the same error.
How is it possible to resolve this issue?
What is a best practice in the case of changing queries working with bica?
Thanks.
Best regards,Orit.

Dear Orit,
Keep in mind that dimensions provided by a BICA query connection must have a HIERARCHY associated to the base characteristic in BW. PAS uses this hierarchy to define the "Result" (rollup) levels of the dimension. Check your BW query and verifiy that all the included dimensions have associated hierarchies in use. I'm guessing this is the issue with your new dimension.
You can also check the dimensions in PAS by selecting your model, then "Dimensions" and right-clicking on the affected dimension name and then the "View" option (or "List" or something related to displaying the dimension definition). You should see a PAS script that describes the dimension, including the dimension member IDs, descriptions and rollup levels. This should be consistent with your query results and hierarchies).
Also, from the same menú you may also choose to "Delete" a dimension.
Good luck!
Regards

Results in the query are not like the one in the cube

Hello there,
I have a problem. when I execute a query, and see the results, it doesn't match. The query calculates some things. I have a sort of formula, when I execute it on database level I get a other result and when I execute on query level I get other results. The problem is that the wrong results that I get, is for a couple of days. only couple of days are wrong. Where should I search because I don't know it anymore.

Hi
Check the data of your cube from LISTCUBE TCode. And then apply the formula (what you have applied at the query level) on the Cube data.
And then compare the data if it is matching.
And if you find that data in Cube is wrong then you will have to hig in to its source data.
Regards
Rohini

Variable entry issue when the query is executed on the WEB

Similar Messages

Maybe you are looking for