Results in the query are not like the one in the cube

Hello there,
I have a problem. when I execute a query, and see the results, it doesn't match. The query calculates some things. I have a sort of formula, when I execute it on database level I get a other result and when I execute on query level I get other results. The problem is that the wrong results that I get, is for a couple of days. only couple of days are wrong. Where should I search because I don't know it anymore.

Hi
Check the data of your cube from LISTCUBE TCode. And then apply the formula (what you have applied at the query level) on the Cube data.
And then compare the data if it is matching.
And if you find that data in Cube is wrong then you will have to hig in to its source data.
Regards
Rohini

Similar Messages

TS4001 Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's goin

Bookmarks are not syncing to ONE of my Macs, but showing up on other Mac (work), iPhone 4 and iPad 1. Macs are on Mountain Lion. Tried all of Apple's suggestions - and the one Mac is still not updating/syncing Bookmarks or Reading List. What's going on? Do I have to wait to OS update? It seems lots of peolple were having issues before ML, but I as fine. Since ML, I am having all kinds of issues!

Yeah, I literally have tried everything except deleting my iCloud account (I'm close, but that would require so many changes that it is way too painful to consider at this point).
I am still waiting to hear back from Apple Support. Hopefully something can be done, or they can do a reset on their end.
Thanks for taking the time to respond though, much appreciated!

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular

I have Prem. Elements 12. I am trying to add audio media. I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not. In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer. This happens with mp3 and mp4 and just wav files. Some audio are accepted, most are not. I get that codec is not installed error message, too.

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

IOS 5: regular messages are not sent if one recepient is registered with iMessage

There is a bug in iOS 5: SMS messages are not sent if one receipients mobile number is registered with iMessages.
This is confirmed by the developer of the team sms app: if you send a message to a number of receipients and one of the recepients mobile numbers, the message is sent do, is registered with iMessage, then none of the recipients will receive the message.
Does anyone know a work around until Apple comes up with a bugfix?
Regards, Til

I am not sure about the details of your case, but I can confirm that a message does send to multiple recipients even if one of this has iMessage. I recently sent a message to two people, one with a BB and one with an iPhone 4 (iOS 5 and iMessage working). Because of the difference, it resorted to the least common denominator and sent the message as a standard text to both people. I was replied to by both parties. Based on your description I can confirm that your detail is not the case.
Have you checked through the settings in Messages? Do you have a texting plan associated with your account? I am sorry if these questions seem stupid, but they are worth asking to verify.
I hope this helps!

Forms are not opening if one of the 2-node 11gR2 DB instance is down

recently we have upgraded database from 2-node 10gR2 RAC to 2-node 11gR2 instance.
But, if one of the instance is down, the forms are not picking up the 2nd node and forms are not opening.
Can someone help me to fix this issue as its PROD.

Hi,
Please send the output of below command, run this in your application node.
"tnsping MMAPPS_BALANCE"
Your SID_BALANCE TNS-ENTRY should look like below on the application server. Below is just for example of 3 node rac. You should not edit tnsnames.ora file manually, if you configure your context file properly, autoconfig will generate properly.
LABDB_BALANCE=
        (DESCRIPTION=
            (ADDRESS_LIST=
                (LOAD_BALANCE=YES)
                (FAILOVER=YES)
                (ADDRESS=(PROTOCOL=tcp)(HOST=node2-vip.hingu.net)(PORT=1522))
                (ADDRESS=(PROTOCOL=tcp)(HOST=node1-vip.hingu.net)(PORT=1522))
                (ADDRESS=(PROTOCOL=tcp)(HOST=node3-vip.hingu.net)(PORT=1522))
            (CONNECT_DATA=
                (SERVICE_NAME=LABDB)

Query with not like

Hi,
I am strugling with a query to display only Production Order in which there is lack of item '05.%'...
Is there a way to achieve only such Production Orders list ?
Any help would be appreciated.
Thank you,
Tomasz

ok, maybe I'll give the example as I don't know the solution:
SELECT T0.[DocNum], T0.[ItemCode], T0.[Status], T0.[Type], T0.[PlannedQty], T1.[ItemCode]
FROM OWOR T0 INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry
WHERE T1.[ItemCode] not like '05.%'
as result I see Production Orders, when I enter some of these documents I see they have '05.%' item in line, the question is how to list only the documents without '05.%' item.
Thank you,
Tomasz

Aggregate Hit by query are not shouwing up

Hello Friends. i am facing issue with aggregate not being hit. I created the aggregate by using first the field and filter that exist when i run the RSRT with Aggregate found selection . then i use the same list of fields and created the aggregate. now when i am running the RSRT and choose display aggregate found it still display the cube name in Column Cube/Aggregate.
also checked sto3n it shows the aggregate but say 0 execution
1. i did activated and filled the aggregated
2. i did check its all green
How do i make 100% sure that my aggregate is not being hit by report. if thats the case then how do i fix it so that query hit the aggregate. even though i am putting the same selection like month march 2008 as fiscal year period.
i did not see the fiscal year variant field in aggregate but i see that comes with fiscal year / period
please help resolve the issue
Thanks
Regards
Soniya

hi,
Any updates...

Form settings are not saved on one client

Hello,
What are possible reasons that form settings like size and position are not saved.
I have one client with SBO 8.8 PL15 installed. On this client this settings are not saved.
So the user has to resize the forms everytime he opens it.
I tried it myself with his SBO user directly on the server and a terminal-server. No problems there, all settings
are saved even if i switch between the systems.
If i am correct these settings are saved in the UserPrefs field in the OUSR table.
Any ideas?
Thank you for all your help.

Hi,
Have you searched the forum?
You may check this to start:
User Settings lost after session is released
This setting is related to client.
Thanks,
Gordon

Some Out-Variables are not filled when one is missing (Oracle-Client 10)

Hello everybody,
we have a problem in our applications, written in C++ using OCI.
All works fine with Oracle Client 8 and 9, the problem occurs when using Client 10.
A simple example:
select 1, 2, 3, 4, 5 from dual;
I have 4 out-variables, the 3rd one is missing:
OCIDefineByPos(..., 1, &out1, ...);
OCIDefineByPos(..., 2, &out2, ...);
OCIDefineByPos(..., 4, &out4, ...);
OCIDefineByPos(..., 5, &out5, ...);
When executing with Oracle Client 8 and 9, the result is:
out1 = 1
out2 = 2
out4 = 4
out5 = 5
Executing the same with Oracle Client 10, the result is:
out1 = 1
out2 = 2
out4 = 0
out5 = 0
When there is a selected column without a variable for it, all following out-variables are not filled. Can someone repeat and / or explain this? I read the Oracle Docs for the OCI 10, but nowhere is a hint about differences or changes in this behaviour. I know that when selecting a column I should spend an out-variable for it, but nobody is perfect.
Here are some details:
Oracle Client 10.2.0.1.0
Client OS Windows XP SP1
Oracle Database 10g Release 10.2.0.1.0
Application developed with Visual Studio C++ 7.1
Thanks for any help.
Torsten
Here's the code, I changed the simple OCI-example from the Oracle homepage:
void ocitest()
static text username = (text ) "xxx";
static text password = (text ) "yyy";
static OCIEnv *envhp;
static OCIError *errhp;
static sword status;
sword out1, out2, out3, out4, out5;
sb2 ind1, ind2, ind3, ind4, ind5; /* indicator */
static text maxemp = (text ) "SELECT 1, 2, 3, 4, 5 FROM dual ";
OCISession authp = (OCISession ) 0;
OCIServer *srvhp;
OCISvcCtx *svchp;
OCIStmt stmthp, stmthp1;
OCIDefine defnp1 = (OCIDefine ) 0;
OCIDefine defnp2 = (OCIDefine ) 0;
OCIDefine defnp3 = (OCIDefine ) 0;
OCIDefine defnp4 = (OCIDefine ) 0;
OCIDefine defnp5 = (OCIDefine ) 0;
(void) OCIInitialize((ub4) OCI_DEFAULT, (dvoid *)0,
(dvoid * (*)(dvoid *, size_t)) 0,
(dvoid * (*)(dvoid *, dvoid *, size_t))0,
(void (*)(dvoid *, dvoid *)) 0 );
(void) OCIEnvInit( (OCIEnv **) &envhp, OCI_DEFAULT, (size_t) 0,
(dvoid **) 0 );
(void) OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &errhp, OCI_HTYPE_ERROR,
(size_t) 0, (dvoid **) 0);
/* server contexts */
(void) OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &srvhp, OCI_HTYPE_SERVER,
(size_t) 0, (dvoid **) 0);
(void) OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &svchp, OCI_HTYPE_SVCCTX,
(size_t) 0, (dvoid **) 0);
(void) OCIServerAttach( srvhp, errhp, (text *)"", strlen(""), 0);
/* set attribute server context in the service context */
(void) OCIAttrSet( (dvoid *) svchp, OCI_HTYPE_SVCCTX, (dvoid *)srvhp,
(ub4) 0, OCI_ATTR_SERVER, (OCIError *) errhp);
(void) OCIHandleAlloc((dvoid *) envhp, (dvoid **)&authp,
(ub4) OCI_HTYPE_SESSION, (size_t) 0, (dvoid **) 0);
(void) OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_SESSION,
(dvoid *) username, (ub4) strlen((char *)username),
(ub4) OCI_ATTR_USERNAME, errhp);
(void) OCIAttrSet((dvoid *) authp, (ub4) OCI_HTYPE_SESSION,
(dvoid *) password, (ub4) strlen((char *)password),
(ub4) OCI_ATTR_PASSWORD, errhp);
checkerr(errhp, OCISessionBegin ( svchp, errhp, authp, OCI_CRED_RDBMS,
(ub4) OCI_DEFAULT));
(void) OCIAttrSet((dvoid *) svchp, (ub4) OCI_HTYPE_SVCCTX,
(dvoid *) authp, (ub4) 0,
(ub4) OCI_ATTR_SESSION, errhp);
checkerr(errhp, OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &stmthp,
OCI_HTYPE_STMT, (size_t) 0, (dvoid **) 0));
checkerr(errhp, OCIHandleAlloc( (dvoid *) envhp, (dvoid **) &stmthp1,
OCI_HTYPE_STMT, (size_t) 0, (dvoid **) 0));
checkerr(errhp, OCIStmtPrepare(stmthp, errhp, maxemp,
(ub4) strlen((char *) maxemp),
(ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT));
checkerr(errhp, OCIDefineByPos(stmthp, &defnp1, errhp, 1, (dvoid *) &out1,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind1, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
checkerr(errhp, OCIDefineByPos(stmthp, &defnp2, errhp, 2, (dvoid *) &out2,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind2, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
/* checkerr(errhp, OCIDefineByPos(stmthp, &defnp3, errhp, 3, (dvoid *) &out3,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind3, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));*/
checkerr(errhp, OCIDefineByPos(stmthp, &defnp4, errhp, 4, (dvoid *) &out4,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind4, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
checkerr(errhp, OCIDefineByPos(stmthp, &defnp5, errhp, 5, (dvoid *) &out5,
(sword) sizeof(sword), SQLT_INT, (dvoid *) &ind5, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT));
/* execute and fetch */
if (status = OCIStmtExecute(svchp, stmthp, errhp, (ub4) 1, (ub4) 0,
(CONST OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT))
if (status == OCI_NO_DATA)
else
checkerr(errhp, status);
void checkerr(OCIError *errhp, sword status)
text errbuf[512];
sb4 errcode = 0;
switch (status)
case OCI_SUCCESS:
break;
case OCI_SUCCESS_WITH_INFO:
(void) printf("Error - OCI_SUCCESS_WITH_INFO\n");
break;
case OCI_NEED_DATA:
(void) printf("Error - OCI_NEED_DATA\n");
break;
case OCI_NO_DATA:
(void) printf("Error - OCI_NODATA\n");
break;
case OCI_ERROR:
(void) OCIErrorGet((dvoid *)errhp, (ub4) 1, (text *) NULL, &errcode,
errbuf, (ub4) sizeof(errbuf), OCI_HTYPE_ERROR);
(void) printf("Error - %.*s\n", 512, errbuf);
break;
case OCI_INVALID_HANDLE:
(void) printf("Error - OCI_INVALID_HANDLE\n");
break;
case OCI_STILL_EXECUTING:
(void) printf("Error - OCI_STILL_EXECUTE\n");
break;
case OCI_CONTINUE:
(void) printf("Error - OCI_CONTINUE\n");
break;
default:
break;
}

Use int/long instead sword .

Query is not running after one table exceeds certain records, any limit?

I have a production database and a reporting database. Production is on version 9.2.0.5 where as Reporting is on 9.2.0.3. I had a query which uses Gl table which grows every month. The query use to take almost same time both in Production as well as Reporting. After the table grew in last couple of months. I observed the query just hangs up in production where as it continues to run in Reporting. Is it the orcale version which makes any difference for the query not to run in prodcution when Gl table had 27 million rows as against 25 million rows a couple of months of ago? Any help is appreciated.

user5846372 wrote:
If I use the gl table which was populated until two months ago having less than say 25.2 million rows, the query runs in 2 minutes. If I use the current gl table having current data (total of say 27 million rows) then the query does not even run. From the current gl table if I delete about 2 million records making it 25 illkion rows then the query runs. So I was wondering whether it is the oracle version which makes this difference.Explain your logic that says that after the queries run successfully on different versions, the version difference is now somehow causing the problem - and not the fact that what did change since the last successful run was the the data volumes....
As for "+the query does not even run+" - it does. Simply that you do not have a clue what it is doing and thus no means to diagnose the problem. And then jump to the conclusion that the version difference is somehow to blame.
WHAT is that query doing when it seems to "hang"? (it very likely does not hang at all, and is simply very busy with I/O or being blocked from accessing a resource it needs)
Have you looked at the events and wait states of the query? Have you looked, as Daniel already suggested, at the execution plan?
You cannot and should not attempt to diagnose a problem, without understanding the problem. If you have no idea what the problem is, how can you simply jump to the conclusion that "+oh, it must be the version difference+"!?
You can only solve a problem by understanding it. It is that simple. So first understand what the query is doing and why it seems to hang BEFORE you attempt to diagnose and solve it.

My iPad fell off the bed. Now when I turn it on there is a red backlight and then the images come on, but they are not like before. The picture colors are distorted. Can this problem be rectified?

Having problems with my iPad after it fell of the bed. When I turn it on there is a red backlight, then the screen comes on. Even then the page does not look right. Images are distorted and there are patches of red in the images. What does this mean? Can the problem be rectified?

I would take it to the Apple store but some people have been having luck holding their iPad upside down and smacking it on it's back. Be careful, good luck.

Results from query are not shown (FRM-40350)

When I do a query on a form I get the message FRM-40350 Query caused no records to be retrieved. But when I use count query there are records fetched..
I would like to know what can be causing this.
I am using Designer 2.1.2 with Headstart 2.1.2.

Dear Prakash,
you have saved our day!!
That was exactly to step needed to bring the key figures into the query.
Why is this not documented anywhere?
Thank you very much,
Mathias

My email forms are not working with one website, but are for my others, all hosted by the same host....

I cannot get my email forms to work for one of my live sites... They work when I published to business catalyst, now they do not. I have contacted the host and they cannot seem to see the issue, as the other sites they host for me, the forms work just fine... Please help, I am about to punch a hole through my computer...
-Travis

Whatever happened, it sounds like you need to reset your phone. As contacts and messages seem to have gone they would be lost anyway unless they were on the SD card and/or backed up using Nokia Suite.
I'd suggest you reset the phone by dialling *#7370# followed by the security code which is 12345 by default (is asked). The phone will reset and you should be able to use it again afterwards.
Let us know what happens..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Filter by "Result from another query" option not available in Webi

Hi all
I am trying to filter one query by zipcode based on the results of a previously run query in the same report. However this option is not available on the drop down when I drag zipcode into the filter pane. I am restricted to the options: Constant, Value(s) from a list, Prompt or Object.
I have "use subqueries enabled" within my universe and the data is held in an RMDBS (i.e. it is not an OLAP universe) so I expected this functionallity to be available.
I am using XI 3.2 and Java version 1.6.0.15, i.e. up to date.
Any help would be greatly appreciated.
Thanks
Sharon

Sharon,
Here is one method to achieve your objective, however, it involves the use of Merge Dimensions. Here goes:
In the Edit Query mode, build two queries, where the first query has all the objects, to include Zip code, and the second query has the zip code, filtered for the one at hand. (you probably have done this portion already)
In the Edit Report mode, think of your data set as Query1 (all the data objects you want) and Query2 (zip code and filtered on that zip code) and thus you'll have Query1.zip and Query2.zip. If you build a grid containing all the data you want from Query1, then simply add Query2.zip to that grid, voila, the grid will be "filtered" due to the "merge" that occurs under the wire. The 'problem' here is that you have two columns that are repetitive and there is no inherent way to "hide" a column in WebI other than masking the column with white on white (font/borders) or some folks sometimes apply Alterters to achieve the same.
Best of luck in moving forward with your task.
Thanks,
John

Results in the query are not like the one in the cube

Similar Messages

Maybe you are looking for