Variable in Select statement JDBC sender

Hi All,
I am working on JDBC sender and this scenario is working fine. Now the legacy system has different enviroment for development, quality and production so I need to change the enviroment for each system.
Is there any way I can make it as variable and the movment it system checks it's development of XI system then it should pick up right enviroment for legacy system and that can be used in select statement.
My select statement looks like and highlighted one is the enviroment which needs to be a variable.
select digits(HMOUTLT) as HMOUTLT, hmprodu as HMPRODU, HMCHKOQ as HMCHKOQ, HMCHKiQ as HMCHKIQ, HMWKPER as HMKPER, HMLSDAT as HMLSDAT from bi5filmm.bsimhp where hmprflg = ' ' and rrn(bsimhp) < 3000 and hmextdt = '2007-12-24'.
I am not sure if value mapping can be used here or not.
regards
Ria

solved

Similar Messages

Bind Variable in SELECT statement and get the value in PL/SQL block

Hi All,
I would like pass bind variable in SELECT statement and get the value of the column in Dynamic SQL
Please seee below
I want to get the below value
Expected result:
select distinct empno ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
100, HR
select distinct ename ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
TEST, HR
select distinct loc ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
NYC, HR
Using the below block I am getting column names only not the value of the column. I need to pass that value(TEST,NYC..) into l_col_val variable
Please suggest
----- TABLE LIST
CREATE TABLE EMP(
EMPNO NUMBER,
ENAME VARCHAR2(255),
DEPT VARCHAR2(255),
LOC    VARCHAR2(255)
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (100,'TEST','HR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (200,'TEST1','IT','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (300,'TEST2','MR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (400,'TEST3','HR','DTR');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (500,'TEST4','HR','DAL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (600,'TEST5','IT','ATL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (700,'TEST6','IT','BOS');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (800,'TEST7','HR','NYC');
COMMIT;
CREATE TABLE COLUMNAMES(
COLUMNAME VARCHAR2(255)
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('EMPNO');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('ENAME');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('DEPT');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('LOC');
COMMIT;
CREATE TABLE DEPT(
DEPT VARCHAR2(255),
DNAME VARCHAR2(255)
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('HR','HUMAN RESOURCE');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('MR','MARKETING');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
COMMIT;
PL/SQL BLOCK
DECLARE
TYPE EMPCurTyp IS REF CURSOR;
v_EMP_cursor    EMPCurTyp;
l_col_val           EMP.ENAME%type;
l_ENAME_val       EMP.ENAME%type;
l_col_ddl varchar2(4000);
l_col_name varchar2(60);
l_tab_name varchar2(60);
l_empno number ;
b_l_col_name VARCHAR2(255);
b_l_empno NUMBER;
begin
for rec00 in (
select EMPNO aa from EMP
loop
l_empno := rec00.aa;
for rec in (select COLUMNAME as column_name from columnames
loop
l_col_name := rec.column_name;
begin
l_col_val :=null;
   l_col_ddl := 'select distinct :b_l_col_name ,pr.dept ' ||' from emp pr, dept ps where   ps.dept like ''%IT'' '||' and pr.empno =:b_l_empno';
   dbms_output.put_line('DDL ...'||l_col_ddl);
   OPEN v_EMP_cursor FOR l_col_ddl USING l_col_name, l_empno;
LOOP
    l_col_val :=null;
    FETCH v_EMP_cursor INTO l_col_val,l_ename_val;
    EXIT WHEN v_EMP_cursor%NOTFOUND;
      dbms_output.put_line('l_col_name='||l_col_name ||' empno ='||l_empno);
   END LOOP;
CLOSE v_EMP_cursor;
END;
END LOOP;
END LOOP;
END;

user1758353 wrote:
Thanks Billy, Would you be able to suggest any other faster method to load the data into table. Thanks,
As Mark responded - it all depends on the actual data to load, structure and source/origin. On my busiest database, I am loading on average 30,000 rows every second from data in external files.
However, the data structures are just that - structured. Logical.
Having a data structure with 100's of fields (columns in a SQL table), raise all kinds of questions about how sane that structure is, and what impact it will have on a physical data model implementation.
There is a gross misunderstanding by many when it comes to performance and scalability. The prime factor that determines performance is not how well you code, what tools/language you use, the h/w your c ode runs on, or anything like that. The prime factor that determines perform is the design of the data model - as it determines the complexity/ease to use the data model, and the amount of I/O (the slowest of all db operations) needed to effectively use the data model.

Getting error after putting variable in select statement

Hi All,
Kindly help me with Pl/sql code
here i'm trying to put variable in select statement ....
I successfully put the Yr and Mnth ..but getting error for loop variable "i"
Here i'm getting error that too because of " i" only-->TRIM(UPPER(TO_CHAR(TO_DATE(i||'-'||Mnth||'-'||Yr,'dd-Mon-YYYY'),'DAY')))
Please find the full code below.
Declare
Yr number not null:=2010;
Mnth varchar2(20) not null:='Jun';
v_val number:=0;
begin
for i in 1..2 loop
case i
SELECT count(*) into v_val
FROM DUAL
WHERE TRIM(UPPER(TO_CHAR(TO_DATE(i||'-'||Mnth||'-'||Yr,'dd-Mon-YYYY'),'DAY')))
in (UPPER('Monday'),UPPER('Tuesday'),UPPER('WEDNESDAY'),UPPER('THURSDAY'),UPPER('friday'))
end case;
end loop;
end;

Declare
Yr number not null:=2010;
Mnth varchar2(20) not null:='Jun';
v_val number:=0;
begin
for i in 1..2 loop
SELECT count(*) into v_val
FROM DUAL
WHERE TRIM(UPPER(TO_CHAR(TO_DATE(i||'-'||Mnth||'-'||Yr,'dd-Mon-YYYY'),'DAY')))
in (UPPER('Monday'),UPPER('Tuesday'),UPPER('WEDNESDAY'),UPPER('THURSDAY'),UPPER('friday'));
end loop;
end;

How to use column name as variable in select statement

hi,
i want to make a sql query where in select statement using variable as a column name. but its not working plz guide me how can i do this.
select :m1 from table1;
regards

Hi,
Is this what you want..
SQL> select &m1 from dept;
Enter value for m1: deptno
old   1: select &m1 from dept
new   1: select deptno from dept
    DEPTNO
        10
        20
        30
        40
SQL> select &m1 from dept;
Enter value for m1: dname
old   1: select &m1 from dept
new   1: select dname from dept
DNAME
ACCOUNTING
RESEARCH
SALES
OPERATIONS
SQL> select &&m1 from dept;
Enter value for m1: loc
old   1: select &&m1 from dept
new   1: select loc from dept
LOC
NEW YORK
DALLAS
CHICAGO
BOSTON
SQL> select &&m1 from dept;
old   1: select &&m1 from dept
new   1: select loc from dept
LOC
NEW YORK
DALLAS
CHICAGO
BOSTONIf you use single '&' then each time you fire the query, It will ask for the new value..
But if you will use double '&&' the value of m1 will be persistent across the session..
Twinkle

Using variable in select statement (php)

I am having difficulty using a variable in a select
statement.
The following manual query (using a static date) works fine:
$query_Recordset1 = "SELECT * FROM academyClasses WHERE
classDate > '2006-06-01' ";
However, If I use the following:
$dateVar = date('Y-m-d');
mysql_select_db($database_mw, $mw);
$query_Recordset1 = "SELECT * FROM academyClasses WHERE
classDate > $dateVar ";
ALL records are returned, which means the $dateVar variable
is not being recognized. I have compared the $dateVar values
<?php echo $datetime; ?> against the actual value of my date
field <?php echo $row_Recordset1['classDate']; ?> in my
results table and it seems that the values are indeed accurate in
terms of a date 2006-06-04 for example.
My date field "classDate" is of a "date" type within the
mysql database. I'm using Dreamweaver MX 2004 with Mac OSX 10.3.9.
I'm sure this is just a syntax problem, at least I hope it
is.
Any help is greatly appreciated.

On Wed, 7 Jun 2006 04:49:57 +0000 (UTC), "mgwaters"
<[email protected]> wrote:
>Thanks Gary. That did seem to get the select statement
working, but I had to
>enter a manual date as before $dateVar = '2006-06-01'; on
the previous line of
>code to actually get it to filter my records. So... it
looks like my setting of
>the date variable:
> $dateVar = date('Y-m-d');
> does not seem to be recognized within the SELECT
statement.
Try this:
$query_Recordset1 = "SELECT * FROM academyClasses WHERE
classDate>'$dateVar'";
print $query_Recordset1;
See what is in the SQL statement.
Gary

Passing a variable to select statement

Hi there,
I have a selection screen on which you can choose which table do you want to display.
I store the name of the selected table in a variable tab_name.
I want to use something like that:
data: tab_name(40).
select * from tab_name
    into gt_master.
endselect.
But it did not allowed because tab_name is not a database table.
Is it possible to pass the table name in a select statement using a variable?

Hello
Yes it is posible you can use a dynamic select...
Try this:
DATA tabname(10).
DATA: BEGIN OF wa,
        id   TYPE scustom-id,
        name TYPE scustom-name,
      END OF wa.
tabname = 'SCUSTOM'.
SELECT id name INTO CORRESPONDING FIELDS OF wa FROM (tabname).
WRITE: / wa-id, wa-name.
ENDSELECT.
or
CONSTANTS: flight_tab_name(30) VALUE 'SPFLI'.
DATA: from_clause TYPE STRING.
DATA: BEGIN OF wa,
        name(20) TYPE C,
        connid   TYPE spfli-connid,
      END OF wa.
CONCATENATE flight_tab_name ' AS t1'
            ' JOIN scarr AS t2 ON t1carrid = t2carrid'
   INTO from_clause.
SELECT t1connid t2carrname AS name
    FROM (from_clause)
    INTO CORRESPONDING FIELDS OF wa.
WRITE: / wa-name, wa-connid.
ENDSELECT
Hope this helps
Gabriel

Storing variable from select statement

I need to store a variable from a select statement into a session. Before I was taken what was passed from another page and throwing it into a session.--
String Password= request.getParameter("Password");
String sql = "Select WEB_USER_ID FROM Web_User WHERE PASSWORD = '" + Password +"'";
session.setAttribute("USER",Password);
Now though I need to put in Web_User_Id and cannot find the proper syntax. Can someone help
session.setAttribute("User",???????);

WEB_USER_ID is unidentified because it is a column name, not a variable name. You should first assign its value to a variable and then put the variable name into the setAttribute statement instead.
Your query may return more than one result based on the way it is written. It sounds like you are trying to find all users with a password that is equal to the value of Password. If this is correct, then are you trying to create an attribute for each user?
If your intention is to locate a user, then the user id and password should have been provided. A variable should be defined for both the password and user id. You should then add the user id to the where clause. After a successful search, the attributes can be created using the same syntax.

Exclude variables in select statement

Hi,
I need to select some values from a column in a table. How do make my select statement such that:
This is INCLUDED from the result:
   "Cropland_Stir_high"
While this is EXCLUDED:
    "Cropland_Stir_high_with_Structures"
My statement:
select *fromHUCS
whereHUCCODE='01010001'AND
name='Cropland_Stir_high";
Appreciate any help.
Marilyn Gambone

Good day deskcheck1,
Since you use the word "include" I am guessing that you want any row that the string include (part of the string is equal to) 'Cropland_Stir_high',
but not those that include 'Cropland_Stir_high_with_Structures'.
In this case you should know the sign % and you can use this query:
select * from HUCS
where HUCCODE='01010001' AND name like '%Cropland_Stir_high%' and not name like '%Cropland_Stir_high_with_Structures%'
You can (and should) learn more about Filter Conditions in this link:
https://msdn.microsoft.com/en-US/library/k58xx95s(v=vs.80).aspx
Ronen Ariely
[Personal Site]    [Blog]    [Facebook]

Variable in select statement - Is it possible!

Hello All,
I have a internal table with one column containing table names
Field
RSAABAP
RSATABLE
RSAFGA
I need to read this internal table and write the content of each table on the screen.. like select * from...
My question here is
Is it possible for me to use a statement like
select * from tabname where this tabname is variable which could accomodate the table names like RSAABAP & so on..
Thanks in advance!
Karthik

Yes it is possible:
select *
from ( v_tabname )
into table itab.
where..
Refer the following example:
<i><b>Example
Dynamic specification of the inner joins. The column specification after SELECT is also dynamic.
PARAMETERS: p_cityfr TYPE spfli-cityfrom,
            p_cityto TYPE spfli-cityto.
DATA: BEGIN OF wa,
         fldate TYPE sflight-fldate,
         carrname TYPE scarr-carrname,
         connid   TYPE spfli-connid,
       END OF wa.
DATA itab LIKE SORTED TABLE OF wa
               WITH UNIQUE KEY fldate carrname connid.
DATA: column_syntax TYPE string,
      dbtab_syntax TYPE string.
column_syntax = `ccarrname pconnid f~fldate`.
dbtab_syntax = `( ( scarr AS c `
& ` INNER JOIN spfli AS p ON pcarrid = ccarrid`
& ` AND p~cityfrom = p_cityfr`
& ` AND p~cityto   = p_cityto )`
& ` INNER JOIN sflight AS f ON fcarrid = pcarrid `
& ` AND fconnid = pconnid )`.
SELECT (column_syntax)
       FROM (dbtab_syntax)
       INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT itab INTO wa.
WRITE: / wa-fldate, wa-carrname, wa-connid.
ENDLOOP.</b></i>
Regards,
ravi

JDBC Sender Adapter - Records sent one at a time

Hello everyone,
Here's a summary of my scenario JDBC > XI > RFC.
My select statement (JDBC) looks like this:
SELECT * FROM BATCH WHERE STATUS='Y'
The problem is, whenever it returns multiple rows, the RFC can only accept one record at a time (1...1), so I need to pick up the records from the DB and send them one at a time.
Currently, this is how the output XML looks like:
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</row>
<row>
<number>200000000473</number>
<status>Y</status>
</row>
<row>
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Instead, I need each row to be picked up and sent one at a time.
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000473</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Does anyone know the changes I need to make in my current SELECT statement or the JDBC Sender Adapter to make this possible.
Thanks in advance!
Glenn

Thank you all for your replies. I'll check out your link in a bit, Phani. Thanks!
A SpliByValue won't work since the BAPI Header is (1...1).
Luckily, during testing, I found out that the BAPI (BAPI_PRODORDCONF_CREATE_TT) handles multiple lines in one of the subelements of the header so that was where I mapped the Rows.
I might need to trigger multiple BAPIs in the future, so I'll take a good look at your suggestions, but for now, I'm marking this question answered.
Warm regards,
Glenn

How to call user fuction in select statement.

hi,
i am facing some problem.How to call user functions in select statement.please send me answer with example.
Thanks
Gopal

Locations to Call User-Defined Functions
• Select list of a SELECT command
• Condition of the WHERE and HAVING clauses
• CONNECT BY, START WITH, ORDER BY, and GROUP
BY clauses
• VALUES clause of the INSERT command
• SET clause of the UPDATE command
Restrictions on Calling Functions from SQL Expressions
To be callable from SQL expressions, a user-defined
function must:
• Be a stored function
• Accept only IN parameters
• Accept only valid SQL data types, not PL/SQL
specific types, as parameters
• Return data types that are valid SQL data types,
not PL/SQL specific types
• Functions called from SQL expressions cannot
contain DML statements.
• Functions called from UPDATE/DELETE statements
on a table T cannot contain DML on the same table
T.
• Functions called from an UPDATE or a DELETE
statement on a table T cannot query the same table.
• Functions called from SQL statements cannot
contain statements that end the transactions.
• Calls to subprograms that break the previous
restriction are not allowed in the function.
jeneesh

Execution time difference between SELECT & UPDATE statement in JDBC Sender.

Hi Experts,
In my scenario, I have used the JDBC Sender Adapter with the SELECT and UPDATE statement.
Now the problem is in between the execution of Select and update statement, few more entries are coming in the same DB Table.
So result of this is updation take place for those entries which are not even picked up by the select statement.
Can we avoid this execution time difference between the SELECT & UPDATE statemet on JDBC Sender side???
Thanks & Regards
Jagesh

Hi
Use serializable option in additional parameters, now all new entries would also be updated.

JDBC Sender - Wrong SELECT statement (Oracle driver)

Hi,
3 days ago I was having a problem with my JDBC Sender adapter [JDBC Sender adapter is reading but then there isn't the message in SXMB_MON; .
Finally I discovered what's wrong but I can't understant why is not working. When I deleted the "WHERE" condition in my SELECT statement all worked OK (except that I need the WHERE statement...).
Why that statement is not working in my JDBC Sender:
SELECT * FROM MATERIALES WHERE LEIDO<>'X'
and that statement works:
SELECT * FROM MATERIALES
The field "LEIDO" is my flag that I must set to X when I read with the UPDATE statement, so I need the where condition...

Thanks Christopher but still not working
I tried two new statements:
1 - Escaping: SELECT * FROM MATERIALES WHERE LEIDO <> 'X'
2 - Changing the operator symbol: SELECT * FROM MATERIALES WHERE LEIDO != 'X'
The nº1 gives me an error of invalid character
The nº2 has the same effect than the other symbol, the adapter reads from the DB but no XML message is generated and no payload to check what's happening... just a message ID without information and without a message generated in SXMB_MONI

JDBC Sender MSSQL Stored Procedure - Multiple Select Statements

Hello all,
I will proceed to tell you my problem, for which solution I request your kind advice:
Im working in a project for a retailer, which consists in sending the information from erp and sql server to pos thru XI interfaces.
One of the interfaces is about sending items from sql server to a file so the pos can load it into the system. For doing so I have devloped an stored procedure which function is to return several select statements as many stores the retailer might have, so they can have a different file per store along with its corresponding items in it.
The thing is that XI just gets the first select statement and creates the corresponding file, but it seems to ignore the remaining responses as I'm neither getting any file nor an error afterwards.
So, my question is: is XI capable of handling multiple select responses from an Stored Procedure in graphical mapping??? Or am I just wasting my time trying?
Thanks in advice for your help.
Regards.

Hello Ramkumar,
After 5 days trying, I finally made it work out applying your advice. Below the short explanation of what I did:
My Source structure is: Main Node->Row->Records (Material Number, StoreNum, Price, Status)
My Target structure is: Main Node->File Node->Record Node->Records ( Material Number, Price, Status)
The key was to make all the occurrences happen against StoreNum node. So, based on what you adviced these two where the key mappings:
1) The Mapping that will create a new file for each different store that comes in the query (In my case, query was already sort by store using an sql "order by" function, if not you can also use xi node function "sort" as Ramkumar suggested)
StoreNum->RemoveContext->SplitbyValue (Value Changed)->Collapse Contexts->File Node
2) The Mapping that will create each record in its corresponding store file:
StoreNum->RemoveContext->SplitbyValue (Value Changed)->Record Node
And Voilá !!! It worked.
Thanks very much Ramkumar.
Regards.

Parameters in select statement in JDBC Sender Adapter

Hi,
Is it possible to construct a SQL select statement with some parameters (for example: #currentdate )?
(for sender JBDC adapter)
Thank you

hi,
you can very well construct a select statement.
The Source data type should be of this format:
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset>
try this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
regards,
Priyanka

Variable in Select statement JDBC sender

Similar Messages

Maybe you are looking for