Variable substitution in error message

I'm trying to create a document that contains generic error messages in a module used by different projects. I intended to share the messages by including them as a variable substitution within the error message e.g.:
Error("%message_dob_in_future%") but all I get out in the error message is the stuff between the quote marks (i.e. %message_dob_in_future%).
I presume that variable substitution doesn't work in error or warning messages? If not, any chance of including it in the future?

Hi Matthew
You should be able to use a screen label to achieve the same functionality. Just add the label to the screen on which you want it to appear, substitute in the attribute value, and format it to look like an error.
Does that help?
Fiona

Similar Messages

Object variable or With block variable not set error message

When processing the Rate application I get a "Object variable or With block variable not set error message" What is causing this error and how do I fix it?

Hi Brian,
I'm afraid that in some ways this reply won't be very helpful though it may help you save some time.
The error message you describe is a very generic one thrown by Microsoft .NET (the programming platform that SAP is written with, see the link at the bottom of this message) and not being 'handled' by SAP.
This means from a SAP perspective that any one of many unrelated things may be causing the error and that it gives you virtually no help in tracking the problem down in SAP.
We've plagued by this message quite a bit, my advice is to look for clues at to what may be happening elsewhere, e.g. try:
1. The windows event viewer, if you are in a multi-server environment then check the event log on all machines.
2. The SQL Server event log (this can be found in Management Studio - Management - SQL Server Logs assuming you're using SQL Server 2005)
3. IIS logs, usually these are text files in the following location -
HTTP.SYS Error Log - %windir%\System32\LogFiles\HTTPERR
IIS Website Log - %windir%\System32\LogFiles\W3SVC#
It is dull work trawling through all these places looking for error events with a timestamp similar to the time your error was encountered, but by doing this we've been able to troubleshoot some issues that otherwise would have taken us ages to rectify via trial and error.
Sorry that there is no definitive answer, but if itu2019s of any help there's many more of us out there who this error message causes trouble for.
Regards,
Iain
Microsoft "Object variable or With block variable not set" error message link:
http://support.microsoft.com/kb/316478

Receiver File Adapter:Variable substitution :FATAL ERROR

HI all
as per the previous thread :
<b>Receiver File Name Variable Substitution :payload: Fatal Error
in our idoc to file sceanrio, we are using simple <b>graphical mapping.</b>
for dynamic file name , variable field is at <b>Target message type</b>,So on using <b>Variable substitution</b>, again the error is same :
SAXException while parsing XML payload: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) .
<b>Our XI Component version : 2004
WAS 6.4 SP 15</b>
Thanks
AR

Ashutosh,
There is nothing to do with your mapping programs. Its the mistake in ur reciever file adapter configuration for variable substitution.I asked u whether u changed message mapping in order to implement the UDF!!
Did u tried checking the audit log. Ok just to see where u are going wrong, instead of using Payload :... in Variable substitution use Message:..... and give some interface name so that to check whether the file is created with Interface name.
Juz give a try!!!
Best regards
raj.

IDOC to File, variable substitution on outbound message XML tag attributes

My scenario is IDOC to FILE using XSL mappings.The target format is 2 XML tags (header, line) with the data stored in the attributes of each tag.
EG. <header attr1=one attr2=two attr3=three><line attr1=one attr2=two /></header>
The name of the file is dictated by an outbound attribute value in the header tag.
Can I get access to it the attribute in the target message in the CC_FILE using variable substution. ?
Currently I am not using content conversion as the XSL produces the file format needed, so I would pefer not to change the outbound message format/structure as this is going to an external party. I would prefer not to change the outbound format as this would need content conversion to strip the unwanted/information/processing node that is used for this purpose (file naming).
The name is a calculation of fields in the IDOC and is not explicit dictated (business logic is applied in the mapping to get the file name), so I would prefer to use the attribute of the resulting XML to keep the "business logic" in the XSL..
Things that cannot be changed.... 1. Must use XSL.for mapping. 2. Format cannot be changed of the outbound message. 3. Would prefer not to involved content conversion to keep formatting/node structure in the XSL mapping.
I have seen some reference to this being possible on the forums but nothing solid from what Ive read.
Something like var1 = payload:/Header/@attr1 in variable sub to get at the attribute
Any comments ?
Thanks in advance.
One final piece of info. its on a PI 7.1 system.

I think its best explained by my other thread Link:PI 7.1 Access to Dynamic Configuration through Java Class .
Thanks for the link I have already implemented based on that link but the one crucial difference is that it is implemented using a static method with no reference to the actual object (payload) for Dynamic configuration. It seems that without the 7.0 API which isnt available in 7.1 by default XSL with java extentions is limited to static methods. If you could read the other thread it certainly is possible I'm mistaken.

File to file with out message mapping and using variable substitution

Hi,
Can any one send me a scenario where we can have file to file scenario with out message mapping and where i can use variable substitution.
As of now i am using integrate configurations where i cant use variable substitution as the message does not reflect in integration engine. I need to populate time stamp between <filename><timestamp>.txt.pgp
I am as of now using configuration scenario.
The time stamp always writes before the last file extension.
Let me know your thoughts?
Thanks,
Chandra.

Hi Chandra,
u can use the Variable substitution even without IR contents also(Mapping....).
in the receiver communication channel just specify the path u want to access for a value...
eg: filename payload:mt_name,1,records,1,name,1
and in th file name give it as %filename%.txt... or vt ever ur requirement
Babu

Problem in variable substitution

Hi experts,
I need help for a strange problem:
I have a proxy to file scenario in which I create an xml file; I need to use a field of the mapping to create filename.
In Receiver CChannel I have used variable substitution, but in message monitoring I got this error:
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: Folio: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: Folio.
FileName Scheme is: DM65_%Folio%.xml
In variable substitution I have used this reference:
Folio = payload:MT_MexicanElectronicInvoice_MyFirm,1,CABFAC,1,Folio,1
This is the payload of the message that ends in error:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_MexicanElectronicInvoice_MyFirm xmlns:ns0="urn:MyFirm-EDICOM:MexElectronicInvoice">
- <CABFAC>
<IdLabel>CABFAC</IdLabel>
<Version>3.0</Version>
<Folio>2100000003</Folio>
<FecHac>16-11-2011 17:11:17</FecHac>
<FPago>Advance payment</FPago>
<Subtotal>9.976,00</Subtotal>
<TotalFac>11.568,16</TotalFac>
What is the problem? wrong reference?
thanks
Fabio

Hi,
Everything looks fine.
Make sure that there is no extra space after your "%Folio%" under the Variable Substitution.
Make sure that "Adapter Specific message Attributes" is unchecked in the CC.
You can do a change in message mapping to create a header field<occurence: 1> map to a constant and call it in var substitution.
As Mickael suggested above make sure using only lowercase on your variant name %folio% instead of %Folio%.
For 1:N muti-mapping with variable substition go through the below links:
Re: 1: N File Scenario..
Using Variable Substitution
i hope it will help you.
regards,
ganesh.

How we can mention varible substitution for diffrent message payloads

Hi,
How we can mention varible substitution for diffrent message payloads,
My sceanrio like following,
According the Outbound idoc message,based on the condition the messages to be split into 9 diffrent files.The sender message may or may not satisfied the condition to one or two messages or all messages.
I done the mapping 1:N multimapping in messagemapping & Interface mapping too.
In reciever file adapter i put the variable substiution like as fallows.
Variable Refrence
Name-- -
Filename -- payload:message_type_1,1,Segment1,1,Segment2,1,Field_1,1
<b>How we can mention variable substitution for remaining messages in the same communication channel.my message type names are diffrent for all 9 messagetypes.</b> Any ideas pl forward..,
When i am testing this scenario,able to processing a one file but the file is not placed in the specified target & gives the follwing error:
'Conversion configuration error: Unknown structure 'ns1:message_type_2' found in document', probably configuration error in file adapter (XML parser error)'.The file is
In this case Idoc data satisfied the one message condition only.
If any ideas & suggestions ..?

Hi Anjan
You could always put the "FileName" and "Directory" names into the Dynamic Configuration using a UDF in the map - possibly using a value mapping table to determine the correct values. Then simply reference "%Directory%" and "%FileName%" in the file adapter. This way you do not have to reference payload variables and you set the names in the map. You will need to tick the box for "use adapter specific message attributes" in the file adapter. you UDF code will look something like
String dir = "/path";
String fil = "filename.txt";
DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
conf.put(key,dir);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(key,fil);
- Stephen

Error Message:Not enough balance in bond/UT1

Dear Expert,
I am creating ARE1 document excise under Running bond through tr cd J1IA101 in development client but at the time of posting ARE1 document system is giving error message" Not enough balance in bond/UT1: 0000010019 / 2010" Message no. 4F227 (error)
and "Reservation amount is greater than the balance in the bond!"(warning)
I checked the balance in bond it is really less but my client some times creating ARE1 document with negative bond balance because of delay in proof of export document for previous ARE1 documents and now we are implemening the ARE1 generation through sap.
i want to know is it possible to change this error message to warning message or is their any other way to allow the system to generate ARE1 document with nagative bond balance.
thanks in advance
warm regards
ravi

HI
this is to inform you that
LSEUAF04                          1207         MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                                     RAISING NOT_FOUND.
                                  1258       MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                                   RAISING NOT_FOUND.
                                  1273         MESSAGE I200 WITH FINDOBJECT MESSAGESTRING SCOPEOBJECT
                                                       SCOPE_OBJ RAISING NOT_FOUND.
the error which you are showing in the thread is dynamicall called from other program through the variables.
convert this error message to warning message
hope this clears your issue.
balajia

"Failed to load Main-Class manifest attribute" error message !

Hello
I am trying to download a library to use with my applets.
(objectdraw.jar)
After I download it, I try to open it ( double click on it) and it says
"Failed to load Main-Class manifest attribute from
C:\2_jbproject\objectdraw.jar
I need to open it in order to use it with my applets .
What do I need to do ?
Thank you in advance

cannot find symbol constructor
Sun(objectdraw.DrawingCanvas)Isn't Sun your class? If so (unless BlueJs error messages are confusing) it sounds like your Sun class does not have a constructor with the signature you are using.
I'm not familiar with BlueJ, but hopefully it ignores the classpath environment variable (though your error message lead me to belive otherwise). Regardless, this is a bad way to use classpath as it can lead to confusing problems down the road.
The objectdraw library is there but maybe I have to open or extract itfor it to be seen. But how ?
No you don't have to extract it, thats the whole point behind a jar. What you do have to do is ensure it is on the classpath for both compilation and execution. For compilation, read the help/documentation for BlueJ. For applet deployment, refer to the java tutorial section on applets and pay close attention to the applet tag description, especially the comma delimited archive attribute.
Good luck

Error in Variable Substitution

Dear All,
Result Payload:
<ns1:MT_Level1 xmlns:ns1="http://test.com">
<Header>
<Separator>,</Separator>
</Header>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<Detail>
<FileNumber>30</FileNumber>
<LinkToNextLevel />
<Expansion1>0</Expansion1>
<Expansion2>0</Expansion2>
<Expansion3>0</Expansion3>
<Expansion4>0</Expansion4>
</Detail>
<FileNode>
<FileName>test.txt</FileName>
</FileNode>
</ns1:MT_Level1>
I want to use "File Name" in the "File Node" node for my variable substitution.
In the configuration:
File Name Scheme = %filename%
Variable = filename
reference = payload: Messages, 1, Message, 1, MT_Level1, 1, FileNode, 1, FileName, 1
Note: I'm using multimapping (1 to N).
File Name path is /ns0:Messages/ns0:Message2/ns1:MT_Level1/FileNode/FileName ( from right click in the file name --> copy path).
I got following error:
"Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: filename"
Please advise!
Best Regards,
Victor.

Dear All,
My problem is solved!
The issue is because I don't put the interface mappings sequence as the same sequence as the message mappings sequence. Hence the structure name that i put in the variable substitution all are not match with the structure name in the payload even though all have the file name element.
So what i did is i have to reorder the sequence of my message mappings to be the same sequence as the interface mappings sequence.
Thanks for all that trying to help!
Appreciated it guys.
BTW, for the variable reference it's correct that i no need to put message and message2 as the reference.
payload:MT_Level1,1,FileNode,1,FileName,1 will do.
Best Regards,
Victor.

Variable substitution error

Hello All,
Below is my source structure:
<Messages>
   <Message1>
       <MT_BILL>    (0...*)
          <RECORD> (1....*)
             <FILENAME> (1...1)
If using variable substitution for the filed FILE NAME which is in the source structure.
This is the declaration I used in channel:
payload:MT_BILL,0,RECORD,1,FILENAME,1
But i am getting this error in channel monitoring
DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var
Can anyone help me here
Regards,
Moorthy

Hi Dasika,
In variable substitution we use the receiver message type path.
Please map the required source field to any of the field at the reeiver side and use variable substitution.
For 1:N muti-mapping with variable substition go through the below links:
Re: 1: N File Scenario..
Using Variable Substitution
Regards,
Pranav

Error-Receiver File Adapter using Variable substitution when file is empty

XI Experts,
We are on PI 7.0, SP14.
We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when certain condition does not exists in source message so in the message payload filename element will not exists in such condition and file will be empty and we should not create file.
Parameter in the communication channel for Handling empty message is "Ignore".
Does anyone knows how to handle this scneario. We don't want to default any file name in the message mapping if source file name element does not exists.
We are following getting error in the Adapter engine.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file
Thanks
MP

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

'Variable Substitution' error - Expected numeric element index

Hello everyone!
I'm using the 'variable substitution' property in XI to replace the filename of the output file to a value in the message payload.
Here are the parameters I provided:
File Name Scheme: %filename%.xml
Variable Name: filename
Reference: payload:ORDERS05,1,recordset,1,IDOC,1,E1EDK02,BELNR,1
I'm getting this error in the adapter engine:
Caught exception while initializing variable substitution engine: Cannot parse pseudo-path for variable substitution: 'filename': Expected numeric element index, got 'BELNR': For input string: "BELNR"
Can anyone tell me what this means, and how I can fix this problem?
Thanks in advance!
Glenn

Yup, raj! it's IDOC to file.... I did what you asked but I'm now getting this error:
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header
any idea what it means?
Kind regards,
Glenn

Variable substitution error in Prod- Urgent

Hi Friends
I transported my objects from dev to production and one of my scenario started giving this error .
Please guide
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: store: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: store.

this error is beacuse the variable substution which is specified in the rceiver file adapter is failling....
ROOT cause:
goto the receiver file adapter of the interface you have moved into PRD...you will c the filename somethinglike this
%var%.txt...below you will c a variabel substuition screen
var payload:..........
check the foeld which is refering from the target strcuutre...the data is not coming into this field of variable substuition...so it is thorwoing this error.....
this is considering the variable substution path is right? i belive it is right since you haev omved this to PRD from Devlopment...if this was working in development...check the data is coming in that field.
wehen you did a tranposrt into PRD you went to the change list did u edit the rceiver adapter mandatory fields according to the PRD envinorment? dd u also make sure the variabel substution is not touched when you did this?

Error with variable substitution..

Hi
I am getting following error message for variable substitution
*Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_stamp: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: date_stamp
<?xml version="1.0" encoding="UTF-8" ?>
- <I813_EModMCS_IB_MT>
- <Records>
<ModMod>111</ModMod>
<DesModdcr>222</DesModdcr>
- <Date_Stamp>
<Date_Stamp>20080338</Date_Stamp>
</Date_Stamp>
</Records>
</I813_EModMCS_IB_MT>
date_stamp             payload:I813_EModMCS_IB_MT,1,Records,2,Date_Stamp,3,Date_Stamp,1
Would appriciate if you can correct the variable substitution...
Regards

To reference the element that is in bold in the example, the following expression is used: payload:root,1,e1,1,e2,2
The parser searches for the first occurrence of the root element at the first level. It then searches for the first occurrence of e1 at the second level and for the second occurrence of e2 at the third level. The content of the last element (u201CExample Valueu201D) is set as the value for a specified variable.
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<dummy>
     <e1>
        <e2>Data_1</e2>
        <f/>
        <g attr="abc">text</g>
        <e2>Data_2</e2>
     </e1>
</dummy>
<e1>
     <e2>illegal/value</e2>
     <f/>
     <g attr="abc">text</g>
     <e2 attr="fghij">Example Value</e2>
</e1>
</root>
Edited by: Progirl Progirl on Jul 17, 2008 8:04 AM

Variable substitution in error message

Similar Messages

Maybe you are looking for