Variable to show ALL days of the month

I have a data provider that looks like this:
OID Name Occurence
1 Lemons 20/10/2009
2 Apples 21/10/2009
3 Pearss 24/10/2009
4 Lemons 20/10/2009
5 Apples 21/10/2009
I want produce a cross tab that INCLUDES the count for each day of the month even if an occurence has not happened on that date:
Date 01/10 through to 30/10
Lemons
Apples
Pears
er how do I do this?

Joe,
Insert an extra dataprovider for all the days in the month with a dummy value. You can then add that dummy value in your
crosstab and hide it.
Cheers,
Harry
PS,
Please post your mesage only once instead of 2 or 3 times.

Similar Messages

How to show all days of the year 1900

how to show all days of the year 1900

As you show days for any other year.
Do you want to catch us on the fact year 1900 wasn't a leap year?
Regards
Etbin
select to_date('1.1.' || :the_year,'DD.MM.YYYY') + level - 1
from dual
connect by level <= to_date('31.12.' || :the_year,'DD.MM.YYYY') - to_date('1.1.' || :the_year,'DD.MM.YYYY') + 1*** not tested ***
Message was edited by: Etbin
user596003

Show all days in a month select

hello
i have a ckeckin - checkout table as
id number pk,
emp_id number fk,
checkin date , -- user date enters
checkout date -- user logsout
totalhours number ,
totalminutes number,
state varchar2(3) default 'in'
it keeps totalhours and mins of an employer .i need
a select based on that table of one month
but i want to see the days in the month
(if a user did not enter one day iwant to see o hours , 0 minutes )
select totalhours , totalminutes , checkindate
from checkin_table
where to_char(checkindate,'mon')='FEB'
and emp_id='2'
order by checkindate
and i need something like
7,59, 1-feb
0,0,2-feb
0,0,3feb
8,04,4-feb
best regards
Aris dc
and

What I like in that case is the pipelined function. You can see an example usage Re: Can a view be created within the BEGIN and END block of a procedure
Nicolas.

Schedule Executed weekly except for a specific day of the month

Hi all,
I need to create a schedule that run weekly every sunday at 9 PM, except for 2nd day of the month it will run at 7 AM.
I have created 2 schedules:
1. One to run weekly every sunday at 9 PM, but i don't know from where i can specify the days of the month the schedule will be inactive on it.
* I have tried By Month Day option, and choose all days of the month except second day of the month to run on it.
FREQ=WEEKLY; BYMONTHDAY=1,3,4,5,..,31; BYDAY= SUN; BYHOUR=21;
But, on the schedule preview window as i have designed the schedule from oracle warehouse builder, shows sunday, 02, July for example.
as an execution date for this schedule.
which is not appropriate.
2. Another job is created to run monthly on the 2nd day of the month,
FREQ=MONTHLY; BYMONTHDAY=2; BYDAY= SUN; BYHOUR=7;
So, please advice how to create schedules daily or weekly and neglect some days of month from it.

Hi,
You can use the exclude clause introduced in 10gR2 for this by creating a schedule when your job should not run and excluding it. An example is given below.
Hope this helps,
Ravi.
create or replace procedure print_schedule_dates
   schedule in varchar2,
   start_date in timestamp with time zone default dbms_scheduler.stime(),
   number_of_dates in pls_integer default 10
is
date_after timestamp with time zone := start_date - interval '1' second;
next_date timestamp with time zone;
begin
for i in 1 .. number_of_dates
loop
    dbms_scheduler.evaluate_calendar_string
     (schedule, start_date, date_after, next_date);
    dbms_output.put_line(to_char(next_date,
                    'DY DD-MON-YYYY (DDD-IW) HH24:MI:SS TZH:TZM TZR'));
    date_after := next_date;
end loop;
end;
begin
dbms_scheduler.create_schedule('monthday2',
    repeat_interval=>'freq=monthly;bymonthday=2');
end;
exec print_schedule_dates('FREQ=WEEKLY;BYDAY=SUN;BYHOUR=21;exclude=monthday2',sysdate+1,30);
exec print_schedule_dates('FREQ=WEEKLY;BYDAY=SUN;BYHOUR=21',sysdate+1,30);

Display days of the month as columns along with other information

Hi All
I have a requirement where in I have to display the employee wise leave details for a particular month data passed as parameter to be displayed will be some thing like below
per_all_people_f.employee_name, per_absence_attendances.date_start, per_absence_attendances.date_end, per_absence_attendance_types.name, '01-JAN-2012','02-JAN-2012','03-JAN-2012','04-JAN-2012',..........,'31-JAN-2012'
Test_employee, 02-JAN-2012, 04-JAN-2012, sick leave, N,Y,Y,Y,N,N,N,,,,,,,,,,NSo if the parameter passed is JAN-2012 and the employee has taken leave from 02-JAN-2012 to 04-JAN-2012 the values will be Y otherwise it will be N, Similarly if the passed month is FEB-2012 so the columns will be as below
per_all_people_f.employee_name, per_absence_attendances.date_start, per_absence_attendances.date_end, per_absence_attendance_types.name,'01-FEB-2012','02-FEB-2012',.......,'28-FEB-2012'The last date columns should be dynamic
Any suggestions will be highly appreciated.
Regards

Hi,
This looks like an example of a Pivot . See the forum FAQ {message:id=9360005} for several ways to do that, suitable for different versions.
I hope this answers your question.
If not, post your best attempt, along with a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data. Sinmplify the problem. For example, even though you're interested in all days of the month, post a problem that only involves, say, days after the 26th of the month. We'll help you find a solution that works for all days.
In the case of a DML operation (such as INSERT) the sample data should show what the tables are like before the DML, and the results will be the contents of the changed table(s) after the DML.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0). This is always important, but even more so with pivots.
See the forum FAQ {message:id=9360002}

Function to retrieve all days of the previous month.

Hi,
Yes, it's a monthly report i've been given the task to achieve.
So, all I need is all days of previous month (even if there is no data for this day)
I've been instructed to use the following code, but it does not return any value:
DECLARE
   CURSOR CUR_LAST_DAY IS
      SELECT TO_CHAR (LAST_DAY (ADD_MONTHS (SYSDATE, -1) ), 'DD')
        FROM DUAL;
   VVA_LAST_DAY   VARCHAR2 (2);
   VNU_JOUR       NUMBER       := 0;
BEGIN
   OPEN CUR_LAST_DAY;
   FETCH CUR_LAST_DAY
    INTO VVA_LAST_DAY;
   CLOSE CUR_LAST_DAY;
   WHILE VNU_JOUR <= TO_NUMBER (VVA_LAST_DAY) - 1
   LOOP
      VNU_JOUR := VNU_JOUR + 1;
   END LOOP;
END;
--CLOSE CUR_LAST_DAY
--DEALLOCATE CUR_LAST_DAY-----
On the other end, i've developped this code:
SELECT TO_CHAR(SYSDATE,'dd')
FROM DUAL
WHERE TO_CHAR(SYSDATE,'dd') >= to_char(to_date(to_char(ADD_MONTHS(SYSDATE, -1),'yyyy-mm')||'-01'),'yyyy-mm-dd')
AND TO_CHAR(SYSDATE,'dd') < to_char(LAST_DAY(to_date(to_date(to_char(ADD_MONTHS(SYSDATE, -1),'yyyy-mm')||'-01'),'yyyy-mm-dd')));Which is returning a null value. :(
Regards

Hello,
You want to retrieve complete days of last month from one query...so here it is..
SELECT
TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY') COMP_DATE,
TO_CHAR(TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY'),'DD') ONLY_DD,
TO_CHAR(TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY'),'MM') ONLY_MM,
TO_CHAR(TO_DATE(LEVEL||'-'||TO_CHAR(ADD_MONTHS(SYSDATE,-1),'MON-YY'),'DD-MON-YY'),'YY') ONLY_YY
FROM DUAL
CONNECT BY LEVEL <= TO_NUMBER(TO_CHAR(LAST_DAY(ADD_MONTHS(SYSDATE,-1)),'DD'))I am not at database machine so therefore not tested.
But one thing keep in mind that this forum only for reports there is separate forum for sql and pl/sql.
Function to retrieve all days of the previous month.
-Ammad
Edited by: Ammad Ahmed on Apr 22, 2010 10:53 PM
Spelling Mistake

ICal multi-day (not all day) event in Month view not displayed over days

What is it when I have an event that starts on a Wednesday and 4:00pm and goes to Friday at 6:00pm (not clicked as an All Day Event), (in Month view) the only day showing the event is the first day?! Shouldn't it show it over the course of the 3 days!? Outlook does that (I can't believe I just referenced Outlook in an Apple Discussion... in a positive light no less). Is it a setting?

Yes, Apple any help for this would be great. The only way I've come to work around is to use multiple events. So for a flight out of town would be one event, and the return another. I would create a third event then for the actual time out of town. There must be some way to easily fix this.

Is there any funcions available to pick up first day of the month?

I want to show the first month of the year given any date time stamp as input..
eg:
select sysdate from dual
assume sysdate is 10 Mar 2005
the output should be 10 Jan 2005.
We can take the last day of the month by using last_day
how to take the first day of the month given a input datetime?

I want to show the first month of the year given any date time stamp as input..There is a little confusion with the thread's title.
We all answered you about your title question : how to obtain the first day of month, not the first month of year. For which you can test something like this :
SQL> select col1,add_months(col1,(-1*to_char(col1,'MM'))+1)
2 from (select to_date('10032007','DDMMYYYY') col1 from dual union all
3* select to_date('05012007','DDMMYYYY') col1 from dual )
SQL> /
COL1 ADD_MONT
10/03/07 10/01/07
05/01/07 05/01/07
SQL> Nicolas.

Display a metric differently only on last day of the month.

Have a Daily transaction fact where unit cost of product is stored at a day/part num /business unit level.
When we drag and drop date column and unit cost in the report like below we will have
Date      cost
Sep29     $10
sep30     $12
Oct1       $12
Oct2       $14
..........ans so on
The source sustem program runs on last day of the month around 8pm for setting up cost to reflect on 1st of every month
But the nighly OBI load ( Runs at 2am every day) when incrementally updating Sep30 data picks up $12 from the erp and populates in OBI.
But actually speaking, on Sep30 the cost was $10.
There is no way of running the ERP program to run afer OBI load. Hence we need an expression in the RPD (not answers) saying
when last day of the month (any month) the standard cost must be a previous day value.All other days the same value should be returned.
Is this possible without impacting report performance ?
So, when we drag and drop date and cost value the above report should change as
Date        Cost
sep29     $10
sep30     $10
Oct1       $12
Oct2       $14
Oct30     $12.5
Oct31     $12.5
Nov1      $13.5

You can achieve the above requirement for current month alone with below steps:
The solution requires to have a union report
First part of the report will have Date and Cost fields with a report level date filter, Date NOT IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))
Second part of the report will have Date and Cost fields with a report level date filter Date IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))In the second part of the report,
Change the column formula for Date to display only Current_Date
Change the column formula for Cost field with FILTER(Cost USING Date = Current_Date-1)
Pls mark if correct/helpful.

BIP eBusiness Suite Dates - How to include the last day of the month?

How can I get my report to include the last day of the month 'without' forcing my users to enter the non-intuitive first of the next month as a parm?
I have a report that will generally be run for a month but can be run for any pair of dates representing the first and last date to be included in the report.
When we pass the dates from Oracle Apps to the report it is truncating the date to midnight. This results in the last date entered 'NOT' being included in the report as the second date is marked as "midnight". When I attempt to simply add "=1" to the end date it fails due to formatting issues in apps (only). I have gotten this to work on our Enterprise edition server that we use for testing (only) but it fails in our apps environment.
In APPs we input the date in the format "01-AUG-2007", and this is how it shows in the parm line before the report is submitted as well as in the "View Details" after the report is executed: http://home.swbell.net/grog1//work/req_details_5607586.jpg
However it is odd in that we in the "View Log" entry it shows the date formatted as "2007/08/01 00:00:00": http://home.swbell.net/grog1/work/view_log_5607586.jpg
Even odder is that under diagnostics, "View XML" the date is formatted third way as: "2007/08/01 00:00:00.0" (note it now includes tenths of a second): http://home.swbell.net/grog1/work/view_xml_5607586.jpg
This of course makes it difficult to perform conversions and calculations on the date in the SQL.
Is APPs doing some sort of 'timestamp' conversion?
How can I get my report to include the last day of the month 'without' forcing my users to enter the non-intuitive first of the next month as a parm?
Any feedback is appreciated,
Scott

No. The problem/error occurs long before the data is formatted into xml for presentation to the format template.
The error occurs in the SQL in the 'data' template when I attempt to add a day to the date. It either does not like the implicit conversion with the "+1" and then the use of the "between" with another date or if I attempt to manually convert it has problems with the format mask.
Scott

Ical not showing all day events in lion osx

ical does not show all day events

Hi,
I noticed that the issue only happens to specific user with specific computer. Please do the following checking to narrow down the issue:
1. please update the Outlook client with the latest patches and service packs.
2. disable using Exchange cached mode and check whether the issue happens in Online mode in this computer.
3. Start
Outlook in safe mode to have a try.
4. Perform a clean boot
in your Windows for the new machine.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

ICal 3.0: Last day of the month repeating event

I am migrating back to iCal after a few years using Entourage. I am trying to set up calendar events and reminders for the last day of every month, but I can't figure out how to do it. In Entourage this was easy. Any advice? Thank you.

I would like this to be an easy feature included in iCal as I get paid on the 16 and second to last day of the month. I want iCal to show the event in the calendar, not for me to set the event and have an alarm for 24 hours before. I tried the trick found at http://www.macworld.com/article/47872/2005/11/trickical.html but that does not work with iCal 3.0.
Any help would be appreciated or maybe Apple adding this in the repeating section of the ical event seeing it is apart of the icalendar specification.
tim

How can i load data from access database to datagridview with custom columns all days of a month ?

Hi guys
I am newbie in vb net and I want your help to solve a problem.
I have this datagridview with two columns and all days of a month in custom columns.
[IMG]http://i59.tinypic.com/2qwpj15.png[/IMG]
I also have one combobox to change Year and a combobox to change Month.
Here is the code to load data
Private Sub fill_plan()
dgMonth.Rows.Clear()
Try
Dim i As Integer = 0
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
myDR = cmd.ExecuteReader
If myDR.HasRows Then
While myDR.Read
dgMonth.Rows.Add()
dgMonth.Rows(i).Cells(0).Value = myDR.GetInt32(myDR.GetOrdinal("MonID"))
dgMonth.Rows(i).Cells(1).Value = myDR.GetString(myDR.GetOrdinal("Unitname"))
dgMonth.Rows(i).Cells(2).Value = myDR.GetInt32(myDR.GetOrdinal("Personel"))
i = i + 1
End While
End If
myDR.Close() : con.Close()
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
With
this code the
personel column
loads the first
day of the month.
I want to load
the column the date that is
in the database.

Hello,
This can be done with less code
Private Sub fill_plan()
dgMonth.DataSource = Nothing
Dim dt As New DataTable
Try
Dim query As String = "SELECT MonID,Unitname,Personel,Udate FROM tblMonth ORDER BY Unitname"
con.Open()
cmd = New OleDbCommand(query, con)
dt.Load(cmd.ExecuteReader)
dgMonth.DataSource = dt
Catch ex As Exception
MsgBox(ex.Message, MsgBoxStyle.Critical, "Error")
End Try
End Sub
The above loads all rows, if you want to limit the rows placed in the DataGridView this is best done in the SQL via WHERE conditions and/or with SELECT TOP x.
Formatting of the data is best done via the property window for the DataGridView on whatever column you want too. Using the above you now need to set the data property for each column and set dgMonth.AutoGenerateColumns = False, in the end we end up with
less code
edit is there a reason for returning the primary key? If so then using my method we can hide that field but I see no reason for having it in this case
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

SQL select Statement -first day and last day of the month - 1 year from now

Hi,
I need to write a SQL to get the dates in between first day and last day of the month one year from now.
SELECT last_day(add_months(sysdate,12)) as lastday from dual
What could be the Query to get the first day of the month one year from now..
ie ..Sysdate - 3-DEC-2009
Result - 1-DEC-2010
thank you

Hi,
You can use TRUNC with 2 arguments to get the first DATE in a month, year, quarter, week, hour, minute, ISO year, ...
SELECT TRUNC ( ADD_MONTHS ( SYSDATE
                           , 12
              , 'MONTH'
              )     AS first_of_month
FROM    dual
;The DATE returned will be in the same month, year, quearter, ... as the first argument.
\We convered the last day of the month in [your previous question|http://forums.oracle.com/forums/message.jspa?messageID=3942939#3942939].
At that time, I warded about using LAST_DAY as a cutoff point; TRUNC is a much better way.
For example, to find all appointment_dates in the current month next year:
SELECT *
FROM    appointments
WHERE   appointment_date >= TRUNC (ADD_MONTHS (SYSDATE, 12), 'MONTH')
AND     appointment_date < TRUNC (ADD_MONTHS (SYSDATE, 13), 'MONTH')Note that
the first part of the WHERE clause calls for dates on or equal to the beginning of the 12th month in the future, but
the second part of the WHERE clause calls for dates before, not equal to , the beginning of the 13th month in the future.

How to remove "all day" as the default setting in iCal?

How to remove "all day" as the default setting in iCal? The iCloud calendar works by double-clicking but the local behaves differently.

Hello Valerie,
the default - "all day" or "time based" - depends on the view in iCal. In month view the default is "all day",
in week view or day view it is a time interval, if you use "File -> New Event". If you add the event by double clicking into the calendar, it will depend on the section you are clicking - in the all day section you will add an all-day event, in the time-grid you will enter an event with start-end time.
Regards
Léonie

Variable to show ALL days of the month

Similar Messages

Maybe you are looking for