Variables to pass the input CSV file names

Hi,
I have created an interface source from 2 different CSV files.
Do I need to generate 2 different scenarios or one scenario with variable to pass 2 file names one after the other
2 CSVs are of same type
Thanks for the help

Step1. Create an Interface and load first file and test if that is working fine.
Step 2. Change the resource Name in File to Variable
Step 3. Set variable pass the file 1 and call interface 1 and set variable again with File 2 and call Interface and run the package.
This way you can use the same interface to load file with same structure.
In case you need to carry this same logic with multiple file then
Declare variable and call interface and package and create scenario. Now trigger the scenario and pass the file name.

Similar Messages

How can i pass the Input value to the sql file in the korn shell ??

Hi,
How can i pass the Input value to the sql file in the korn shell ??
I have to pass the 4 different values to the sql file and each time i pass the value it has to generate the txt file for that value like wise it has to generate the 4 files at each run.
can any one help me out.
Raja

Can you please more elaberate., perhaps you should more elaberate.
sqlplus is a program. you start it from the korn shell. when it's finished, processing control returns to the korn shell. the korn shell and sqlplus do not communicate back and forth.
so "spool the output from .sql file to some txt file from k shell, while passing the input parameters to the sql file from korn shell" makes no sense.

Variable substitution: (delete leading zeros from file name)

Hi All,
I am configuring an IDOC to FILE (fcc scenario) with a requirement of using the IDOC number in the output file name.
Using variable substitution, I manged to get the IDOC number from incoming Idoc-control record but it comes in its entitre length with a few leading zeroes like '00000001234'.
So my output file name looks like 'Output_000000001234.txt' . I want it to be like 'Output_1234.txt'.
Is it possible to achieve it ?
Thanks
Shirin

Hi Shirin,
First supress the leading zeros of IDOC number by using the following code:
Create a user defined funciton zerosuppress and take the cache as value and take one argument input. Then put the code below:
//write your code here
String output = input.replaceFirst("^0+","");
return output;
Then use variable substitution for generating ur IDOC number in the out put file name.
Regards,
Vinod.

Error in the input config file

Continue message previous.
I need deploy my application "notitia". Return message:
Failed to deploy web application "notitiancm". Error in the input config file. Attribute Options is a single value attribute.

Don't use EMwebsite. It's SLOW and buggy. I disabled mine.
You can see a lot more error messages using dcmctl:
bin/emctl stop
dcm/bin/dcmctl shell
deployapplication -a myapp -f myapp.ear -co home
geterror
You can also check dcm's and opmn's log files for errors.
Your error message sounds familiar. If you have manually edited http.conf and added multiple entries of ProxyPass or SetEnvIf or who knows what else, you come across an iAS feature. This ias903 core for win2k file
$ORACLE_HOME/dcm/config/plugins/apache/modDirectiveMS.xsd
is no good.
You have to change things like these to maxOccurs="unbounded":
<element name="SetEnvIf" type="string" minOccurs="0"
maxOccurs="unbounded"/>
Then do a
dcmctl updateconfig.
You can find the problem description in Meta-link ohs forum. Apparently the problem will be fixed in 904 but I don't know why we all have to go thru this rite of passage in the mean time... A waste of time.
Ken

How to process large input CSV file with File adapter

Hi,
could someone recommend me the right BPEL way to process the large input CSV file (4MB or more with at least 5000 rows) with File Adapter?
My idea is to receive data from file (poll the UX directory for new input file), transform it and then export to one output CSV file (input for other system).
I developed my process that consists of:
- File adapter partnerlink for read data
- Receive activity with checked box to create instance
- Transform activity
- Invoke activity for writing to output CSV.
I tried this with small input file and everything was OK, but now when I try to use the complete input file, the process doesn't start and automatically goes to OFF state in BPEL console.
Could I use the MaxTransactionSize parameter as in DB adapter, should I batch the input file or other way could help me?
Any hint from you? I've to solve this problem till this thursday.
Thanks,
Milan K.

This is a known issue. Martin Kleinman has posted several issues on the forum here, with a similar scenario using ESB. This can only be solved by completely tuning the BPEL application itself, and throwing in big hardware.
Also switching to the latest 10.1.3.3 version of the SOA Suite (assuming you didn't already) will show some improvements.
HTH,
Bas

Error in the input config file.....delploying an app on oc4j

Hi,
When I try to deploy an application on an oc4j instance of Oracle 9ias it gives me the following error.
"An error occured while undeploying the application. Error in the input config file. Attribute Group is a single value attribute."
I am deploying the application through the EM website.
Any pointers to the solution?
Thanks in advance
Kapil

Don't use EMwebsite. It's SLOW and buggy. I disabled mine.
You can see a lot more error messages using dcmctl:
bin/emctl stop
dcm/bin/dcmctl shell
deployapplication -a myapp -f myapp.ear -co home
geterror
You can also check dcm's and opmn's log files for errors.
Your error message sounds familiar. If you have manually edited http.conf and added multiple entries of ProxyPass or SetEnvIf or who knows what else, you come across an iAS feature. This ias903 core for win2k file
$ORACLE_HOME/dcm/config/plugins/apache/modDirectiveMS.xsd
is no good.
You have to change things like these to maxOccurs="unbounded":
<element name="SetEnvIf" type="string" minOccurs="0"
maxOccurs="unbounded"/>
Then do a
dcmctl updateconfig.
You can find the problem description in Meta-link ohs forum. Apparently the problem will be fixed in 904 but I don't know why we all have to go thru this rite of passage in the mean time... A waste of time.
Ken

Check CSV file name while uploading file?

Hi All,
I am uploading data from CSV file.. That part is working fine.
Now i want to check CSV file name. Ex : CSV file name = W1234H4321AB.
I want to check 6th letter, if 6th letter is eq 'H', i want to upload data otherwise should display some message.
I tried by reading this attribute, but i declared this type as XSTRING, i checked value after using get_Attribute in lv_datasouce. It contains some XSTRING value. How to get CSV file name??
Cheers,
Venkys.

>
Thomas Jung wrote:
> >I want to check 6th letter, if 6th letter is eq 'H', i want to upload data otherwise should display some message.
>
> Everything that you have been told about using the filename property of the FileUpload is correct. However you should note that the filename will not be available until after the file has already been upload to the server. So you can't stop the fileUpload based upon a check of the filename - its too late and the upload has already occured.
yeah that is true. but is there anyway to check it otherwise.
or we need to wait for something in coming versions 7.3 or 7.4.

SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi,
I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
<Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
"The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
error logging. So we created another project in Visual Studio called:
<Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
And this is when the error has come back and bitten me! The scenario is now as follows:
1. project1 packages and deploys successfully with long feature names and deep paths.
2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
1. By doing the following I can get project2 to package
In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
Clean the solution
Shut down Visual Studio 2010
Open Visual Studio 2010
Rebuild the solution
Package the project2
et voila the package is generated!
This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
no longer be hanging onto something.
Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
solutions on a Build Server using automated builds.
2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
5. DebugView shows nothing useful during the build and packaging of the project.
6. The error seems to occur in
CreateSharePointProjectService target called at line 365 of
Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
project2 completely and recreate it and introduce it into my Visual Studio solution.
Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
project etc... and is actually workable in a meaningful Visual Studio solution.

Hi
Yes, I thought I had fixed this my moving my solution from the usual documents to
c:\v2010\projectsOverflow\DetailedProjectTimeline
This builds ok, but when I come to package I get the lovely error:
Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
Now, the error seems to be related to
Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
<metaData>
<type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">VisualProjectTimelineWebPart</property>
<property name="Description" type="string">My Visual WebPart</property>
</properties>
</data>
</webPart>
</webParts>
.... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
Daniel

Install iTunes 10.4.1 install error - The Folder Path "File Name" contains an invalid character

Upgraded computer from XP Prof 32-Bit to Windows 7 Ultimate 64-Bit (Upgrade package, performed Custom Install).
Attempt to install iTunes 10.4.1 for 64-Bit. Receiving the following error/problem:
The Folder Path "File Name on my external drive" contains an invalid character
I click ok and then get this:
The Installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system could not be modified, Please run the installer again, or click Finish to exit.
Any fixes for this?

Sorry, one of us is not managing to be clear enough.
Does the message read The Folder Path "File Name on my external drive" contains an invalid character or perhaps The Folder Path "<some path name here>" contains an invalid character?
If so, then the problem might be just what it says it is with the path name in question... Either way if you list the path given in the error message in a reply to this thread it might provide a clue for anyone tying to help with the problem.
You could try downloading the installer to C:\iTunesSetup.exe in case that helps.
tt2

Ver.9.5 The volume for file name cannot be found

HI,
My work Mac Book pro was recently upgraded to Mavericks from 10.6.8, with iPhoto 11 (ver. 9.5) also an included upgrade. One album of photos is no longer accesible - clicking on each thumbnail provokes the following window "The volume for <file name> cannot be found. The "Try again" option doesn't work, and the alternative, which is to use the finder to locate the file is useless, as the files are buried in a library spare bundle. When I copy the file name, and search on the volume with the library via finder, it pulls up tiny thumbnail size files.
I have a primary iphoto library on a dedicated USB external drive, which I back up not everytime I update the library (200 gbs spare bundle over USB2!), but regularly. I fear these recently imported files, have not been backed up before up erasing cards, and upgrading system OS, have gone.
Is there any way of getting into the library via finder, or elsewhere in iphoto to refind the original master files which are in there somewhere? These files opened perfectly in iphoto before the recent upgrade.

Thanks for the fast response. I've followed your directions and can't find the file in there, in Masters, Originals, or Modified folders. I found files in Thumbnails folder though. Some of the files from the same event are fine, so its not consistent. I'm also noticing that another file in the event has a totally blurred preview (Its a 24mbs Jpg from a Nikon D800) - not sure if this is at all connected.
The positive news is that my NeoFinder database of drives indicates I should have the 'missing' files on another computer in the office, but I'm still scratching my head on this.

" the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?

It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
Other Errors and Warnings
1 error(s), 1 warning(s)
Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
Thanks,
Altaf B.

Hi AltafB,
For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

To test how can we use the opt 'logical file name' to name the file based

Hi Sir/Madam,
to test how can we use the opt 'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.

Hi Vishali,
In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
Rest of the process is same as that of extraction from local file.
Regards,
Durgesh.

Programaticly changing the (suggested only) file name in the save prompt when signing a document?

When you sign a document in Adobe X (or XI), the system says it needs to save the file first. Is there some way to change the (suggested only) file name to a different value for that save?
Right now, people open a blank form - lets call it formX.pdf. They fill it in and sign it. The suggested file name for the save is FormX.pdf. I can generate a unique file name which i'd like to put in place of the suggested default...

AFAIK, you can't do it with code. Your best option might be to use a form field to show a message to the user when they sign the document with that information.

How to change the output executable file name(a.prj:(output)--- b.exe)

LabWindows / CVI： how to change the output executable file name
For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
I will try to save as a.prj b.prj, a.cws save as b.cws
eg:a.prj ---->(output)--->b.exe
Solved!
Go to Solution.

You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
See the complete description of available options here.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Variables to pass the input CSV file names

Similar Messages

Maybe you are looking for