Vba runtime error
Hi,
Our workbook has three sheets and each sheet is having one query. i written vba code to remove '#' values. But when i am refresh all the queries at once i am getting the runtime error
run-time error '1004'
select method of Range class failed
How to solve this:
<b>this is my code:</b>
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
If queryID = "SAPBEXq0001" Or queryID = "SAPBEXq0002" Or queryID = "SAPBEXq0003" Then
resultArea.Select
'Remove '#'
Selection.Cells.Replace What:="#", Replacement:="", LookAt:=xlWhole, SearchOrder:=xlByRows, MatchCase:=False, MatchByte:=True
'Remove 'Not assigned'
'Selection.Cells.Replace What:="Not assigned", Replacement:="", LookAt:=xlWhole, _ SearchOrder:=xlByRows, MatchCase:=False, MatchByte:=True
End If
Please tell us which line creates the error.
If it is the
resultArea.Select?
If so try following:
I assume SAPBEXq0001 to be on sheet 1, SAPBEXq0002 on sheet 2, SAPBEXq0003 on sheet 3 for this coding:
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
Dim SheetNo As Double
Select Case queryID
Case "SAPBEXq0001"
SheetNo = 1
Case "SAPBEXq0002"
SheetNo = 2
Case "SAPBEXq0003"
SheetNo = 3
Case Else
Exit Sub
End Select
'Remove '#'
Sheets(SheetNo).resultArea.Replace What:="#", Replacement:="", _
LookAt:=xlWhole, SearchOrder:=xlByRows, MatchCase:=False, _
MatchByte:=True
'Remove 'Not assigned'
Sheets(SheetNo).resultArea.Replace What:="Not assigned", Replacement:="", _
LookAt:=xlWhole, SearchOrder:=xlByRows, MatchCase:=False, _
MatchByte:=True
End Sub
hope that helps (and runs, not tested.
br
Andreas
Message was edited by:
Andreas Hinrichs
Similar Messages
-
VBA Runtime Error 1004 "Application-defined or Object-defined error"
I have code VBA code written in MS Access 2010 (.mbd file) to write data into an Excel file (.xls file). Below is the code to write data into that excel file. When you run this code, it always throws Error#1004 "Application-defined or Object-defined
error". When you debug the code (F8) or run it (F5), it runs absolutely fine with out any issues. I am still not able to figure it out on what exactly the issue is. This code works fine when executed in MS Access 2007.
Below is thr code that's getting executed and when it fails, the focus is set on the 3rd last line of the code marked in double astriek mark.
Sub PopulateReport(appExcel As Object, testcam)
Dim Site As String, intRec As Integer, i As Integer, cnt As Integer, intRecSet As Integer, cntr As Integer
Dim F1 As String, F2 As String, F3 As String, F4 As String, F5 As String, F6 As String, F7 As String
Dim F8 As String, F9 As String, F10 As String, F11 As String, F12 As String, F13 As String, CAMDate As Date
Close
i = 0
cnt = 0
cntr = 0
Set cnn = CurrentProject.Connection
rec.Open "SELECT * FROM Site", cnn, adOpenStatic, adLockPessimistic
rec.MoveLast
rec.MoveFirst
intRec = rec.RecordCount
Do Until cnt = intRec
rec.MoveLast
rec.MoveFirst
rec.Move cnt
Site = rec(4)
Select Case Site
Case "Fort Worth"
cntr = 0
recset.Open "SELECT * FROM Employee", cnn, adOpenStatic, adLockPessimistic
recset.MoveLast
recset.MoveFirst
intRecSet = recset.RecordCount
appExcel.Application.Goto Reference:="START_FW_CL"
Do Until cntr = intRecSet - 1
appExcel.Selection.EntireRow.Copy
appExcel.Selection.EntireRow.Insert
cntr = cntr + 1
Loop
appExcel.Application.CutCopyMode = False
appExcel.Application.Goto Reference:="START_FW2_CL"
go = appExcel.Application.Range("START_FW2_CL")
cntr = 1
With appExcel.Worksheets("Accts. > Clearing").[START_FW2_CL]
Do Until recset.EOF
**.Offset(cntr, 0) = recset(0)**
.Offset(cntr, 1) = recset(1)
.Offset(cntr, 2) = recset(2)
End SubWhat's wrong about it? It can only copy what you chose to have in the recordset. If you only want some fields or fields in a different order, replace
SELECT * FROM with
SELECT Field1, Field2, etc
CopyFromRecordset is bay far the best method and runs much faster.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz -
Word 2013 VBA Runtime Error 4198
I havea macro thataddsrows in a table(over 500rows)aftera bit ofinsertionsreturnsthe errorruntime
error4198.
my codeis as follows:
For i = 1 To Wx
Selection.PasteAppendTable
Next i....
Thanks
MarzioHi,
I have a document with
the following table:
I mustadd at least1000 linesvia VBA,I try todo it withthe
following code:
'Sub AutoOpen()
Sub Macro1()
' AutoOpen Macro
' Macro created 03/05/2013 by gary and roger
Dim UsPath$
Dim Wx As Integer
UsPath$ = Environ("userprofile")
Selection.Find.ClearFormatting
Selection.Find.Replacement.ClearFormatting
With Selection.Find
.Text = "[#Tipo]"
.Replacement.Text = fVal$
.Forward = True
.Wrap = wdFindContinue
.Format = False
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
End With
Selection.Find.Execute
Selection.MoveRight Unit:=wdCharacter, Count:=5, Extend:=wdExtend
Selection.Copy
Wx = 1000
Selection.MoveDown Unit:=wdLine, Count:=1
Selection.PasteAppendTable
For i = 1 To Wx
Selection.PasteAppendTable
Next i
End Sub
the error is random
Thanks Marzio -
I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"… it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???
Any help here...
http://support.microsoft.com/kb/288117
http://www.macworld.com/article/1154785/welcomebackvisualbasic.html -
Runtime Error '109' - Business Object 6.5 - VBA macro
I am getting the same Runtime error '109' when trying to run my old reports(6.5) which have VBA Macros with the new XI 3.1 DeskI. Here's what I did:
1) Installed BO XI 3.1 client Tools on a machine which has BO 6.5 client tools
2) Opened the .rep in the XI 3.1 DeskI. CLick OK when it warns you that it is a earlier version and If you want to convert to new version.
Then when i try to run the report i get this error. The same .rep runs just fine with 6.5 Full Client.
Any Ideas guys? Am I missing any references or something ?
Thanks
Edited by: Larry Sherman on Aug 14, 2009 8:28 PMLarry, I have seen some instances of VBA code not running in the new Deski version, possibly some calls are different. You will want to open an SAP incident for eng. to take a look at the VBA code.
-
*Runtime error: 91* (DM package)
Hi friends,
i'm trying to run data manager package through a command button, macro i used is MNU_EDATA_RUNPACKAGE.
But when i click on that system prompting with message
Runtime error: 91
"Object variale or with block variable not set".
Or other error message like
*Cannot run this macro "reportname!MNU_EDATA_RUNPACKAGE". The macro may not be available in this workbook or all macros may be disabled.
I enable all macros and cheked tick mark trust access to vba project object model(in macro security).
Is there any macro in bpc nw75, to run only particular package using command button?
thanks.Now not getting this error. don't know answer .
-
Runtime error "1101" invalid resource value.
Hi there I am getting this error message "runtime error "1101" invalid resource value" while I am trying to run my vba to populate my "Work" field. It was working fine for other files.But as soon as I started a new file
with same columns and fields and more projects , I started getting this message.Could anyone please tell me what is going on.I tried by fixing my resource values but still doesn't work.I will really appreciate your help.Thanks in advance.robeenclarke,
What do you mean you tried fixing your resource values? Give us an example of your resource name and work value.
Also, it would be helpful to see the line of code that gave the message.
John -
Business Inkjet 1200d Runtime Error
My Business Inkjet 1200d, C8154A, started streaking color. Black was printing OK.I uninstalled, ran scrubber, and re-installed. Evidently I did not get a good install. Using diagnostic I redownloaded and tried to install latest drivers. When Itried to un-install again I get "Runtime Error!" (No error #). "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
This is my second request. I need some help in uninstalling this printer. Please do not abandon me again. Ted Harris
Intel e6600 Core 2 Duo @ 2.40GHz
Asus P5Q Pro
Noctua NH-U12P Cooler
OCZ Reaper 2X2GB DDR2 800 (PC64)
EVGA GeForce 8800GTS 640 MB
WD 250GB GB SATA II
Corsair CMPSU 550W
Windows XP homeLarry, I have seen some instances of VBA code not running in the new Deski version, possibly some calls are different. You will want to open an SAP incident for eng. to take a look at the VBA code.
-
I have a workbook with VBA and I am getting a 'Run-time Error 1004' and when I hit the debug the process stops at below lines of codes:
' Insert blank rows, one to hold each period and one for the total line
With resultArea.Cells(RowNum, KeyFigCol - 1) {it says Application defined or Object defined error}
If .Value <> "" Then
I saw other threads for this error and I checked the OSS-429183. Also my macro>>security is set to low.
Any suggestions? Plus I am getting this error only in dev environment, stage & production work fine. I have verified the VBA code and they all have same code.Hi All, I still have this problem. I have the same VBA code in all the systems, but it gets error in development system only. its working fine in other systems. That's what breaks my head:(
Any suggestions. I have attached my VBA code.
'* Variable Declarations
Dim Column As Integer
Dim StrPos As Long
Dim TempStr As String
Dim RowNum As Integer
Dim StrRowNum As Integer
Dim EndRowNum As Integer
Dim EndColNum As Integer
Dim KeyFigCol As Integer
Dim DelStrCol As Integer
Dim LabelPos As Integer
Dim ActiveCellSave As String
Dim MonthFlag As String
Dim MonthFlagPrev As String
Dim MonthColStr As Integer
Dim MonthColEnd As Integer
Dim MonthCol1st As Integer
Dim MatMonRow As Integer
Dim ColPrjAvl As Integer
Dim ColTopGrn As Integer
Dim ColTopYel As Integer
Dim ColTopRed As Integer
Dim ColRmdRpl As Integer '001A
Dim ColMaxQty As Integer
Dim ColRplQty As Integer
Dim First As Boolean
Dim NumPeriods As Integer '001A
Dim UsgPerDay As Integer '001A
Dim StartTime
Dim EndTime
' Check the query id to determine which sheet to activate
If queryID = "SAPBEXq0016" Then 'Monthly Query
'Application.ScreenUpdating = False
'Set sheet "Inventory Montly Analysis" to active
Sheets(3).Activate
NumPeriods = 13 '001A
'* 001A: Set "Inventory Weekly Analysis" to active
ElseIf queryID = "SAPBEXq0018" Then ' Weekly query
Sheets(4).Activate
NumPeriods = 24
'* 001A: Set "Inventory Replenishment" to active
ElseIf queryID = "SAPBEXq0017" Then ' Replenishment Detail query
Sheets(6).Activate
NumPeriods = 0
Else
Exit Sub
End If
'* 001A: End of new code
'* Initialization Routines
First = True
' For performance testing, save off the start time of the macro
StartTime = Time
' Save off the current cell location so that we can restore that location
' when formatting is compelte
ActiveCellSave = ActiveCell.Address()
If ActiveCell.Value <> "No applicable data found." Then
' Determine the First Row in the spreadsheet where query results are displayed
' The first row will be stored in variable RowNum
TempStr = resultArea.Address(RowAbsolute:=False, ColumnAbsolute:=False)
StrRowNum = 0
Do While StrRowNum = 0
StrRowNum = Val(TempStr)
If StrRowNum = 0 Then
TempStr = Mid(TempStr, 2, 20)
End If
If TempStr = "" Then
Exit Do
End If
Loop
' Determine the Last Row in the spreadsheet where query results are displayed
' The last row will be stored in variable EndRowNum
TempStr = resultArea.Address(RowAbsolute:=False, ColumnAbsolute:=False)
StrPos = InStr(TempStr, ":")
TempStr = Right(TempStr, Len(TempStr) - StrPos)
EndRowNum = 0
Do While EndRowNum = 0
EndRowNum = Val(TempStr)
If EndRowNum = 0 Then
TempStr = Mid(TempStr, 2, 20)
End If
If TempStr = "" Then
Exit Do
End If
Loop
' Determine the Last Column in the spreadsheet where query results are displayed
' The last column number will be stored in EndColNum
TempStr = resultArea.Address(RowAbsolute:=False, ColumnAbsolute:=False, ReferenceStyle:=xlR1C1)
StrPos = InStr(TempStr, ":")
If StrPos > 0 Then
TempStr = Right(TempStr, Len(TempStr) - StrPos)
StrPos = InStr(TempStr, "C")
If StrPos = 0 Then
EndColNum = 255
Else
TempStr = Right(TempStr, Len(TempStr) - StrPos - 1)
EndColNum = Val(TempStr)
End If
End If
' Clear all of the old contents below the query result area
TempStr = Format(EndRowNum + 1) + ":" + Format(65536)
ActiveSheet.Rows(TempStr).Select
Selection.Clear
' Determine the location of various key figure columns needed in subsequent processing
KeyFigCol = 0
For Column = 1 To EndColNum
' Find the start column for the key figures - Indicated by the first column
' with a dash "-" character in it.
If InStr(resultArea.Cells(1, Column).Value, " - ") <> 0 Then
If KeyFigCol = 0 Then KeyFigCol = Column
End If
' Find the Projected Available Column
If (ColPrjAvl = 0) And (InStr(resultArea.Cells(1, Column).Value, "Proj") <> 0) Then
ColPrjAvl = Column
End If
' Find the Top of Green Column
If (ColTopGrn = 0) And (InStr(resultArea.Cells(1, Column).Value, "Top of Green") <> 0) Then
ColTopGrn = Column
End If
' Find the Top of Yellow Column
If (ColTopYel = 0) And (InStr(resultArea.Cells(1, Column).Value, "Top of Yellow") <> 0) Then
ColTopYel = Column
End If
' Find the Top of Red Column
If (ColTopRed = 0) And (InStr(resultArea.Cells(1, Column).Value, "Top of Red") <> 0) Then
ColTopRed = Column
End If
' Find the Recommended Replenishment Quantity
If (ColRmdRpl = 0) And (InStr(resultArea.Cells(1, Column).Value, "Recommended Replenishment Qty") <> 0) Then
ColRmdRpl = Column
End If
' Find the Usage Per Day
If (UsgPerDay = 0) And (InStr(resultArea.Cells(1, Column).Value, "Usage Per") <> 0) Then
UsgPerDay = Column
End If
' Find the Maximum Order Column
If (ColMaxQty = 0) And (InStr(resultArea.Cells(1, Column).Value, "Maximum Order Quantity") <> 0) Then
ColMaxQty = Column
End If
' Find the Recommended Replenishment Column
If (ColRplQty = 0) And (InStr(resultArea.Cells(1, Column).Value, "Recommended Replenishment") <> 0) Then
ColRplQty = Column
End If
Next Column
'* Begin of main formatting loop
'* Logic for Recommended Repl Highlighting
If NumPeriods = 0 Then
' Highlight the Recommended Replenishment Quantity
For RowNum = 2 To EndRowNum
If resultArea.Cells(RowNum, ColRplQty).Value > resultArea.Cells(RowNum, ColMaxQty).Value Then
resultArea.Cells(RowNum, ColRplQty).Interior.ColorIndex = 7 'Highlight Red
End If
Next RowNum
'* Logic for Monthly and Weekly Queries
Else
' Work from the bottom up, inserting new lines and folding the keyfigures
' downward into one row for each month
For RowNum = EndRowNum To 2 Step -1
' Insert blank rows, one to hold each period and one for the total line
With resultArea.Cells(RowNum, KeyFigCol - 1) This is where it stops & gives Runtime Error 1004
If .Value <> "" Then
' For the bottom-most characteristic row, we must cut and paste differently to ensure
' the cells formats are properly pasted in the new rows
If First Then
TempStr = Format(RowNum) + ":" + Format(RowNum + NumPeriods)
resultArea.Rows(TempStr).Select
Selection.Insert Shift:=xlDown
resultArea.Rows(RowNum + NumPeriods + 1).Select
Selection.Cut
resultArea.Rows(RowNum).Select
ActiveSheet.Paste
First = False
' If this is the first characteristic record, and it resides in row 2, then we know that the
' query only has one row of data - special formatting is required in this situation
If RowNum = 2 Then
resultArea.Cells(2, 1).Select
Selection.Copy
Range(ActiveSheet.Cells(StrRowNum + 2, 1), ActiveSheet.Cells(EndRowNum + NumPeriods, KeyFigCol - 1)).Select
Selection.PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
End If
' Not the first row, use normal processing
Else
TempStr = Format(RowNum + 1) + ":" + Format(RowNum + NumPeriods)
resultArea.Rows(TempStr).Select
Selection.Insert Shift:=xlDown
End If
' As we insert rows for each characteristic row, we need to adjust the end row
' number accordingly
EndRowNum = EndRowNum + NumPeriods
' Initialize variables used for each set of month processing
MatMonRow = RowNum + 1
MonthFlagPrev = ""
MonthFlag = ""
MonthColStr = 0
' Scan key figure column headings from left to right, looking for changes in month
For i = KeyFigCol To EndColNum + 1
' Get the month text for each column
MonthFlag = ""
TempStr = resultArea.Cells(1, i).Value
MonthFlag = Mid(TempStr, InStr(TempStr, "-") + 1, 15)
' If we move into a new month, then copy and paste the previous month downward
If ((MonthFlag <> MonthFlagPrev) And (MonthFlagPrev <> "")) Or (i = EndColNum + 1) Then
If DelStrCol = 0 Then DelStrCol = i + 1 ' Capture last key figure of first month
If i = EndColNum + 1 Then i = i + 1 'For results row, need to extend by one
' Copy and paste values for previous month
Range(resultArea.Cells(RowNum, MonthColStr), resultArea.Cells(RowNum, i - 1)).Select
Selection.Copy
resultArea.Cells(MatMonRow, MonthCol1st).Select
ActiveSheet.Paste
' Paste the Month text into the row heading
resultArea.Cells(MatMonRow, MonthCol1st - 1).Value = MonthFlagPrev
If MonthFlagPrev = " Average Result" Then
Range(resultArea.Cells(MatMonRow, MonthCol1st - 1), resultArea.Cells(MatMonRow, EndColNum)).Select
Selection.Interior.ColorIndex = 36
End If
With resultArea.Cells(MatMonRow, ColPrjAvl)
If .Value >= resultArea.Cells(RowNum, ColTopGrn).Value Then
.Interior.ColorIndex = 43 'Green Green
ElseIf .Value >= resultArea.Cells(RowNum, ColTopYel).Value Then
.Interior.ColorIndex = 14 'Green
ElseIf .Value >= resultArea.Cells(RowNum, ColTopRed).Value Then
.Interior.ColorIndex = 44 'Yellow
Else
.Interior.ColorIndex = 7 'Red
End If
End With
MonthColStr = i
MatMonRow = MatMonRow + 1
End If
' Set variables on first pass through
If MonthColStr = 0 Then
MonthColStr = i
MonthCol1st = i
MonthFlagPrev = MonthFlag
End If
' Capture the previous month text
If MonthFlagPrev <> "" Then
MonthFlagPrev = MonthFlag
End If
Next i
' Clear out the key figure data at the lowest characteristic level
Range(resultArea.Cells(RowNum, KeyFigCol), resultArea.Cells(RowNum, EndColNum)).Select
Selection.ClearContents
End If
End With
Next RowNum
' Strip out the month text from column headings
For i = KeyFigCol To DelStrCol
LabelPos = InStr(resultArea.Cells(1, i).Value, "-")
If LabelPos > 1 Then resultArea.Cells(1, i).Value = _
Left(resultArea.Cells(1, i).Value, LabelPos - 1)
Next i
' Remove Extraneous columns (months 2-12)
Range(resultArea.Cells(1, DelStrCol - 1), resultArea.Cells(EndRowNum, EndColNum + 1)).Select
Selection.Clear
' Format Column Headings with appropriate column widths and heights
resultArea.Rows(1).Select
With Selection
.HorizontalAlignment = xlLeft
.VerticalAlignment = xlCenter
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 1
.ShrinkToFit = False
.MergeCells = False
.RowHeight = 31.5
End With
' 001A: Add empty cells for Recommended replenishment
If ColRmdRpl <> 0 Then
For i = 2 To EndRowNum
If resultArea.Cells(i - 1, 1) = "" Then
Range(resultArea.Cells(i, ColRmdRpl), resultArea.Cells(i, ColRmdRpl + 4)).Insert Shift:=xlToRight
End If
Next i
Columns(ColRmdRpl + 5).Copy
Range(Columns(ColRmdRpl), Columns(ColRmdRpl + 4)).PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
If UsgPerDay <> 0 Then
For i = 2 To EndRowNum
If resultArea.Cells(i - 1, 1) = "" Then
resultArea.Cells(i, UsgPerDay).Insert Shift:=xlToRight
End If
Next i
Columns(ColRmdRpl + 5).Copy
Range(Columns(ColRmdRpl), Columns(ColRmdRpl + 4)).PasteSpecial Paste:=xlFormats, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
End If
For i = 3 To EndRowNum
If resultArea.Cells(i - 1, 1) <> "" Then
Range(resultArea.Cells(i, ColRmdRpl + 1), resultArea.Cells(i + NumPeriods - 1, ColRmdRpl + 4)).Select
Selection.FillDown
Range(resultArea.Cells(i, UsgPerDay), resultArea.Cells(i + NumPeriods - 1, UsgPerDay)).Select
Selection.FillDown
End If
Next i
' Remove Extraneous columns (months 2-12)
Range(resultArea.Cells(1, DelStrCol - 1), resultArea.Cells(EndRowNum, EndColNum + 1)).Select
Selection.Clear
End If
' 001A: End of new code
End If
End If
Columns("A:BA").ColumnWidth = 10
resultArea.Columns.AutoFit
' Set Zoom level at 75%
ActiveWindow.Zoom = 75
' Restore the active cell
Range(ActiveCellSave).Select
' EndTime = Time
' MsgBox StartTime
' MsgBox EndTime
' StartTime = EndTime - StartTime
' MsgBox StartTime
' End If
' End If
'Application.ScreenUpdating = True
End Sub -
Runtime error in starting Lightroom
I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff CulpAha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR
hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situat
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the cur
screen.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENT
SourceCde
message e001(zm) WITH text-335 ltab-kunnr text-334.
else.
if ktab-jkunnr <> ltab-kunnr.
ktab-jkunnr = ltab-kunnr.
jobsitecode = ltab-kunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode
IMPORTING
output = jobsitecode.
SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
IF sy-subrc = 0.
ktab-jname1 = kna1-name1.
ktab-jstras = kna1-stras.
ENDIF.
chg_flg = 'X'.
endif.
endif.
else.
message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
* if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
* message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
* endif.
custcode1 = ktab-ckunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = custcode1
IMPORTING
output = custcode1.
jobsitecode1 = ktab-jkunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode1
IMPORTING
output = jobsitecode1.
SELECT SINGLE * FROM knvp
WHERE kunnr = custcode1
AND vkorg = vbak-vkorg
AND vtweg = vbak-vtweg
AND spart = vbak-spart
AND parvw = 'WE'
Error analysis
The program attempted to issue a " " message during "Exit Command"
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENTHi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"
Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the current
screen.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
How to correct the error
The program must be modified to correct the error.
The modification must be made in "Exit Command" processing.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
Source Code Extract
Line SourceCde
1 *---------------------------------------------------------------------*
2 * FORM YVBEP_LESEN *
3 *---------------------------------------------------------------------*
4 * Lesen der Tabelle YVBEP (nicht sortiert) *
5 *---------------------------------------------------------------------*
6 FORM YVBEP_LESEN USING US_POSNR
7 US_ETENR
8 CHANGING CH_TABIX.
9
10 YVBEP = SPACE.
11 YVBEP-MANDT = VBAK-MANDT.
12 YVBEP-VBELN = VBAK-VBELN.
13 YVBEP-POSNR = US_POSNR.
14 YVBEP-ETENR = US_ETENR.
15 READ TABLE YVBEP.
16 IF SY-SUBRC > 0.
17 MESSAGE E506 WITH US_POSNR US_ETENR.
18 ENDIF.
>>>>> CH_TABIX = SY-TABIX.
20
21 ENDFORM.
Could you please help on this issue.
Thanks
SrinuHi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus
Maybe you are looking for
-
ESS Leave request screen giving a critical Error in production server
Friends, We are in a critical face of ESS implemetation. We are doing an ESS MSS implementation for country grouping 99. When we moved our changes to production server after succesful testing in quality, getting the following Critical error for Leave
-
D810 images not displaying properly in preview app
So when I open an image like something I took from Photo Booth from Finder in Preview app, it loads fine. However, when I open a high res image JPG from my Nikon D810, the image loads initially, then quickly blanks out to all white. If I use the magn
-
TOC is not showing in document
The TOC is not showing up in the Document Inspector. I have no way of actually creating one. Help.
-
Lost Wifi and Battery icons at top of screen
Hi, Post mirroring a tv show on my Mac Air i have lost the icons at the top right of my screen. The spaces still function and both the percentage (not battery icon) and time both still appear. All the other icons appear as blank spaces. please help!!
-
Firing Stored Procedure Into Database At Runtime
HI All, I need a help !. I have created a stored procedure that creates a dynamic SP at runtime depending upon certain values stored in my database. Now I want that as soon as the dynamic SP is written in a flat file on the database server it should