VBRK-NRZAS (Character Field of Length 12)

Hi Experts,
I want to to use VBRK-NRZAS to include the second legal number for El Salvador invoices. I've done a test and I can populate that field with the exit "USEREXIT_NUMBER_RANGE ".
My concern is that I really don't know the standard usage for that field so 'I'm not sure if I would have any problem to use this field.
Thanks for your help!
Ale

Hi,
You could use that, seems this is not used anywhere..I checked the where used list of this field.
However, you can always extend VBRK add a z-field and use it for your pupose--little lengthy but safer approach.
Regards,
Raghu.

Similar Messages

ANY FUNCTION MODULE TO ADD LEADING ZEROS FOR A CHARACTER FIELD

THE CHARACTER FIELD IS OF LENGTH 40 AND IT HAS 5 NON NUMERIC CHARACTERS

Hi ,
Try this
DATA : c4(40).
data : P_FIELD(40) TYPE N.
UNPACK P_FIELD to c40.
<b>Reward Points if useful</b>
Regards
Saket Sharma

BAPI to update VBRK-NRZAS

HI all,
Is thera any BAPI to update the table Field VBRK-NRZAS for Debit memo. Plz help.

you may have to write a bdc on VF02 and proceed .

Filter on character fields

Hi all,
Is there any way to have filter on character fields to get the data even if the input is not given without padding zeroes before the data. for eg in ALV grid display if the data is having 7 characters but total field length is 10 chars then in filter we have give 3 zeroes leading to the data to get the filtered condition. is there any way to avoid this so that the users can give directly the data without leading zeroes.

Hi sathya,
in your itab declare the same field referring to Db table.
this will take care of the padding of zeros as alpha routine is applied on that filed.
so the user can proceed with the same by not giving the input padded with zeroes.
below code will give u an idea.
data : val1 like vbak-vbeln value '0005002030'.
data : val(10) type c value '0005002030'.
write:/ val.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input        = val
IMPORTING
   OUTPUT        = val.
write:/ val.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = val1
IMPORTING
   OUTPUT        = val1.
write:/ val1.
i agree with anurag ..
regards,
VIjay

DESCRIBE FIELD t001 LENGTH anz_fe in which mode ??

Hi all,
I am in Unicode Project. For the statement mentioned below, i have to use IN Character mode or IN BYTE mode ??
DESCRIBE FIELD t001 LENGTH anz_fe
Thanks in Advance.
Sriram

data: l_type type c,
l_number type i.
describe field t001 type L_TYPE components L_NUMBER.
Message was edited by:
Muthurajan Ramkumar

How do I validate one field's length based on another field's selection?

I am creating a form for our offices where I need to check one field for length of a serial number based on the answer to a previous field's selection. Depending on the product selection, the serial number has two different lengths. Both fields are marked as required, but I want to make sure that we receive the full serial number for our product. Previous forms were done on paper and instructions were for the last 4 digits only which now we want the full serial number. One product has a 12 digit number and the other is 6.
I'm guessing that I need a validation script in the serial number field, but I am not a JavaScript coder and haven't found the right thing when searching. Any help would be great!
Thanks!

Never trust your users to follow what you expect them to do... That often leads to mistakes and problems later on.
I would reset the s/n field when a selection is made in the drop-down. To do so set the drop-down field to commit the selected value immediately and add code as its custom validation script:
this.getField("Serial Number").value = "";
To validate the s/n field you can use something like this as that field's custom validation script (of course, you'll need to adjust the field names and values to match the actual ones in your file):
event.rc = true;
if (event.value) {
     var selection = this.getField("Dropdown1").valueAsString;
     if (selection=="1" && event.value.length!=6) {
          app.alert("Error! The s/n must be 6 digits long.");
          event.rc = false;
     if (selection=="2" && event.value.length!=12) {
          app.alert("Error! The s/n must be 12 digits long.");
          event.rc = false;

Field name lengths

The field name lengths in the Citadel database are approaching 80 characters when Citadel adds the total path to each field. I am saving data from a process running on computer #1 to computer #2. I am using OPC and to select the analog input values require an extremely long length to the field names.
i.e.
"\\Dispatchbd1\Freq_Process\FreqOPC.'OPC DAQ Items'.'Analog Input'.'PHS Narrow Freq'" is just one of my field names. When you have 75 values in a database that you want to look at this long name gets discouraging. Any help would be appreciated.

Hi Wapa,
You are right the names are a bit long. Citadel stores the absolute names (includes computer and process name), to make sure the names are unique. For example if process1 and process2 have both Pot1 and you are storing the data to the same database, unless you log it with a process name and computer name you would get a conflict - (if there is just Pot1 you would not know from which process).
So, the computer and process parts are always there. The Item name has to be also included, but you have more choise there. The member ('OPC DAQ Items'.'Analog Input'.''PHS Narrow Freq') can be aliased to anything you want (and is valid). Go to the Edit database - select the item in the second window - select the datatype - type in alias (for example item1) - check the log to
historical database and hit save (you are going to get a warning - don't worry about it, just make sure the alias (item1) you typed is is not already an existing item - because of the folder structure exposed by DAQ OPC you'll be fine).
Now instaed of using "\\Dispatchbd1\Freq_Process\FreqOPC.'OPC DAQ Items'.'Analog Input'.'PHS Narrow Freq'" you can go with "\\Dispatchbd1\Freq_Process\FreqOPC.item1" - you can stop loggin the original member.
If you need to go even shorter, you can create an expression object for every member you want to log and then log the expression. Then you get to something like:
"\\Dispatchbd1\Freq_Process\Exp1"
I hope this helps.
Martin

How to move the value from a character field to numeric or packed decimal

Hi,
can anyone explain me on how to move the value from a character field to numeric or packed decimal.
Please help me on this. Thanks...
Regards,
Rose.

Hi ,
if you use keyword MOVE u may loose the decimal and thoussan separator and if u don't want to loose them just call the FM ..HRCM_STRING_AMOUNT_CONVERT.
i doubt wherther it is HRCM or HCRM just try using *
this will suit ur requirement.
Regards,
KK

Storing a field of length 500 char in a database table

I want to create a ztable in which I need to store the data of length more than 256 , so please let me know , how can we create the field of length 500 chars..
I have tried using STRING and LCHR , but it's not working.
Thank You,
Ankur Goyal

Hi,
Try creating the field like this
1. Create a new data element with required description.
2. While creating data element select 'Built-in type' radio button under Data Type tab. Specify Data type as STRING and press enter. You need not specify Length (or you can provide 500 here, I suggest not to specify field length as it leads to short dump if you enter text more than 500 chars in it).
Note: Once you press enter you can see an information message 'No length restriction'.
3. Save and activate the data element.
4. Use the data element for your text field in your custom table.
Important:
The text field with size >255 chars should not be a key field, neither you should select 'Initial values' option while defining field.
I have tried this and it worked.
Hope this helps.
Thanks,
Venkat

How to get a currency format for a character field

for some specifix reason, we have a requirement to show character field (which results in value 633948) in the format $633,948
how do i do this?
if i do SELECT to_char(:c_1,'$999,999')) from dual;
it gives me ora: 01722: invalid number error
c_1 is a user parameter of data type character

Try using TO_NUMBER first, as in something like:
SQL> VARIABLE c_1 VARCHAR2(6)
SQL> EXECUTE :c_1 := '633948';
PL/SQL procedure successfully completed.
SQL> SELECT TO_CHAR(TO_NUMBER(:c_1), '$999,999') FROM DUAL;
TO_CHAR(T
$633,948Hope this helps.

How to accomodate more than 255 characters in character field

HI All
i need to accomodate more than 255 characters in character field. How can i do that ?
thanks in advance!!!

Hi,
You can try the following things:
1. Use a datatype STRING and check it will work.
2. In se11 transaction goto datatype and search for char* in data elements.
You will find predefined data types ,you can make use of it.
For eg. char2000,char3000,char4000 etc.
Hope this will help.
Regards,
Nitin.

Sql injection character fields

Is it true that with MSSQL in the background, character fields can't be used for sql injection?
A)   One source says that in MSSQL single quotes are escaped into double quotes.
B)   Another source says that " SQL injection (within ColdFusion apps) is really only an issue with non textual fields. If a text value is tampered with you'll end up with tampered text, but that text will all be part of the core string (within quotes) passed as a value, and will therefore not be executed as separate statements. Numbers, on the other hand, are not enclosed within quotes, and so extraneous text can be tampered "
Questions about A):   How does escaping 's with "s help, by making string literals in MSSQL not valid?
                                How could A) above be true when names like O'Mally are being stored with a single quote ?
Questions about B)    Does it mean code like DELETE * FROM atable would just be stored as a string and not execute ?
                                If so, is that accurate ?

To actually answer your question's.
A) A single quote in SQL is a comment. To store a single quote as DATA one has to escape it by doubling it. So to store O'Mally it would be passed as o''Mally.
The simple SQL injection attack is to end a number value with a random value, that is followed with a ; to end the SQL statment and then another statement can be run, this is then followed by a single quote to comment out any other SQL in the original statement. ColdFusion automatically escapes single quotes in text fields in most situations, so this is harder to do with text fields, but not impossible.

HT201991 What is the character limit for length for video or song reviews?

What is the character limit for length for video or song review?

One other thing I found... It was still doing the spinning clock and locking up, but it took a while after boot for the problem to crop up.
I pulled the media card and found that there was a media sync folder under Blackberry\System that had some files in there that were pretty big. The artwork file was over 150MB and some other files were largish.
I deleted the entire media sync folder and now it seems to be behaving itself. No more spinning clock and it seems to be slowly returning to normal. (Besides all the messages it deleted during the whole process)
If anyone else runs into this I would say you should clean the folder off the media card along with disabling the sync. Seems the BB still reads that folder and processes it if present.

How can I link table KONV with table VBRP and VBRK using KSCHL field?

Hi experts,
How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
Thanks,

Hi,
If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
select-options: x_KSCHL for T685l-KSCHL.
select kwert
           kbetr
           knumv
           kposn
           kschl
      from konv
      into CORRESPONDING FIELDS OF TABLE it_konv
      FOR ALL ENTRIES IN it_all
      where knumv = it_all-knumv
      and   kposn = it_all-b_posnr
      and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
endif.
Hope this helps.
Regards,
Chandravadan

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

VBRK-NRZAS (Character Field of Length 12)

Similar Messages

Maybe you are looking for