(VC707 board) How to use an Ethernet on XPS tool.?

Hello.
I'm participating in a project that compose a microblaze-based etherent system .
For this project, I'm using the Xilinx EDK.
Then, I met a problem, yesterday.
On the EDK XPS tool, the implementation process was failed, because of the axi_etherent IP.
I looked into the log file for finding reason.
And then, I found the UCF file was wrong. XPS tools didn't generate the right UCF file the axi_etherent IP.
Besides, the UCF file contents included in the VC707 manual is not matched with the axi_etherent IP's interface....
(Pin name is different each other...)
I try to find the 'VC707 ethernet example on XPS tool'. But I can't find anyone.
Couldn't I compose an etherent system for VC707 board on EDK XPS tool?
If it does, how can I compose an ethernet system for VC707 board.?
Thank'U for reading my question.
And I look forward to good answers.

Hi
Check below link
http://forums.xilinx.com/t5/Xilinx-Boards-and-Kits/VC707-with-Ethernet/td-p/234214/page/4

Similar Messages

How to use recursive in Information Design Tools?

Hi all,
I want to use recursive for count number of employee in each organization. I write code something like this.
with EmpCTE as
      select RootID = D.ORG_CD , D. ORG_CD, D .ParentOID
      from (SELECT     CURRENT_LEAF as ORG_CD ,
               D .DATE_KEY AS DateKey,
                    CASE WHEN LEAF_LEVEL = 1 THEN LEVEL0
                               WHEN LEAF_LEVEL = 2 THEN LEVEL1
                               WHEN LEAF_LEVEL = 3 THEN LEVEL2
                               WHEN LEAF_LEVEL = 4 THEN LEVEL3
                               WHEN LEAF_LEVEL = 5 THEN LEVEL4
                               WHEN LEAF_LEVEL = 6 THEN LEVEL5
                    END AS ParentOID
       FROM [BISIPH_HR]. [dbo].[ORG_HIER_STD] H , MST_DATE_DIM D
       where 1= 1
       and D. DATE_KEY between BEGDA and ENDDA
       and D. DATE_KEY between C_L1_BEGDA_KEY and C_L1_ENDDA_KEY
       and D. DATE_KEY between C_L2_BEGDA_KEY and C_L2_ENDDA_KEY
       and D. DATE_KEY between C_L3_BEGDA_KEY and C_L3_ENDDA_KEY
       and D. DATE_KEY between C_L4_BEGDA_KEY and C_L4_ENDDA_KEY
       and D. DATE_KEY between C_L5_BEGDA_KEY and C_L5_ENDDA_KEY
       and D. DATE_KEY between C_L6_BEGDA_KEY and C_L6_ENDDA_KEY
       and D. DATE_KEY between C_L7_BEGDA_KEY and C_L7_ENDDA_KEY
       )   D
      where 1= 1
      AND DateKey = 20140101
      union all
      select EmpCTE. RootID, D .ORG_CD, D.ParentOID
      from (
        SELECT   CURRENT_LEAF as ORG_CD,
               D .DATE_KEY AS DateKey,
                    CASE WHEN LEAF_LEVEL = 1 THEN LEVEL0
                               WHEN LEAF_LEVEL = 2 THEN LEVEL1
                               WHEN LEAF_LEVEL = 3 THEN LEVEL2
                               WHEN LEAF_LEVEL = 4 THEN LEVEL3
                               WHEN LEAF_LEVEL = 5 THEN LEVEL4
                               WHEN LEAF_LEVEL = 6 THEN LEVEL5
                    END AS ParentOID
       FROM [BISIPH_HR]. [dbo].[ORG_HIER_STD] H , MST_DATE_DIM D
       where 1= 1
       and D. DATE_KEY between BEGDA and ENDDA
       and D. DATE_KEY between C_L1_BEGDA_KEY and C_L1_ENDDA_KEY
       and D. DATE_KEY between C_L2_BEGDA_KEY and C_L2_ENDDA_KEY
       and D. DATE_KEY between C_L3_BEGDA_KEY and C_L3_ENDDA_KEY
       and D. DATE_KEY between C_L4_BEGDA_KEY and C_L4_ENDDA_KEY
       and D. DATE_KEY between C_L5_BEGDA_KEY and C_L5_ENDDA_KEY
       and D. DATE_KEY between C_L6_BEGDA_KEY and C_L6_ENDDA_KEY
       and D. DATE_KEY between C_L7_BEGDA_KEY and C_L7_ENDDA_KEY
       ) D
      inner join EmpCTE on D .ParentOID = EmpCTE.ORG_CD
      AND D. DateKey = 20140101
select distinct
ORG_DIM.ORG_CD
, ORG_DIM. ORG_DESC_T
, EmpCTE. ParentOID
--, EMP_DIM.EMP_CODE
, cnt. Child
, cntemp. ChildEmp
from MST_EMP_DIM EMP_DIM
INNER JOIN TXT_EMP_ORG_FACT EMP_ORG_FACT ON EMP_ORG_FACT .EMP_KEY = EMP_DIM.EMP_KEY
INNER JOIN MST_ORG_DIM ORG_DIM ON ORG_DIM .ORG_CD = EMP_ORG_FACT.ORG_CD
INNER JOIN EmpCTE ON EmpCTE .ORG_CD = ORG_DIM.ORG_CD
INNER JOIN TXT_EMPLOYMENT_FACT EMPLOYMENT_FACT ON EMPLOYMENT_FACT.EMP_CODE_KEY = EMP_ORG_FACT.EMP_CODE_KEY
INNER JOIN (
       SELECT ORG_CD = RootID, Child = COUNT (*)
       FROM EmpCTE
       GROUP BY RootID
) cnt ON cnt.ORG_CD = EMP_ORG_FACT. ORG_CD ------------------ ¹Ñº¨Ó¹Ç¹ ORG ·ÕèÍÂÙèãµé ORG »Ñ¨¨ØºÑ¹
INNER JOIN (
       SELECT ORG_CD = RootID, ChildEmp = Count (*)
       FROM EmpCTE
       INNER JOIN TXT_EMP_ORG_FACT EMP_ORG_FACT ON EmpCTE .ORG_CD = EMP_ORG_FACT.ORG_CD
       INNER JOIN MST_EMP_DIM EMP_DIM ON EMP_ORG_FACT .EMP_KEY = EMP_DIM.EMP_KEY
       INNER JOIN TXT_EMPLOYMENT_FACT EMPLOYMENT_FACT ON EMPLOYMENT_FACT.EMP_CODE_KEY = EMP_ORG_FACT.EMP_CODE_KEY
       WHERE 1= 1
       AND 20140228 BETWEEN EMP_ORG_FACT.ORG_ASSIGN_START_DT_KEY AND ORG_ASSIGN_END_DT_KEY
       AND 20140228 BETWEEN EMP_DIM.EMP_START_DATE_KEY AND EMP_DIM.EMP_END_DATE_KEY
       AND 20140228 BETWEEN EMPLOYMENT_FACT.START_DATE_KEY AND EMPLOYMENT_FACT.END_DATE_KEY
       AND EMP_ORG_FACT. EMP_ASSIGN_PAYROLL_AREA_CD IN ('Z1', 'Z2')
       AND EMPLOYMENT_FACT. EMPLOYMENT_STATUS_KEY = 3
       GROUP BY RootID
) cntemp ON cntemp.ORG_CD = EMP_ORG_FACT. ORG_CD
WHERE 1= 1
AND 20140228 BETWEEN EMP_ORG_FACT.ORG_ASSIGN_START_DT_KEY AND ORG_ASSIGN_END_DT_KEY
AND 20140228 BETWEEN EMP_DIM.EMP_START_DATE_KEY AND EMP_DIM.EMP_END_DATE_KEY
AND 20140228 BETWEEN EMPLOYMENT_FACT.START_DATE_KEY AND EMPLOYMENT_FACT.END_DATE_KEY
AND EMP_ORG_FACT. EMP_ASSIGN_PAYROLL_AREA_CD IN ('Z1', 'Z2')
AND EMPLOYMENT_FACT. EMPLOYMENT_STATUS_KEY = 3
ORDER BY EmpCTE.ParentOID
and result
I want to create ChildEmp object for display in web-i report. How can i use recursive in Information Design Tools? or Do you have other solution for this?
Thank you for your advise.
Notto Zung

Hi,
NoDim is a function of the Bex query formula , so you can't delegate that to the cube.
What object is, and what are you trying to do.   For example, Sales, and trying to leave out Currency attribute.
You can do an awdful of customizing in a Business Layer or Data Foundation, that is where your solution where probably come from.
Regards,
H

How to use long texts in explanation tool tip?

Hi ,
Can anyone tell me how to add long text in Explanation tool tip?
I am able to use short OTR texts in explanation tool tip but not able to use long OTR texts.
Thanks and regards,
Vivek Shetty.

For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10

How to use GB loops in Pro Tools

I'm creating music and collaborating with someone who has Pro Tools but doesn't have Garage Band. My song was recorded into his Pro Tools software. I found a drum loop in my Garageband that I want to use with the song. How can I put it into his Pro Tools without losing any of the integrity of the audio?

I appreciate your help. As you can guess, I am new to the Apple discussion groups.
I tried unhiding files with Terminal, but that did not appear to help in this situation
I did find an answer that suits me for the mean time.
First - (to see loops)
to see the Apple loops on my computer with Finder-
-1 open Finder
-2 Click on 'Go' icon at top of page
-3 This brings drop down box
-4 Click 'Go to Folder' and enter the following
       /Library/Audio/Apple Loops/Apple/Apple Loops for Garageband
Second - to get them into Final Cuty Pro X
Create new folder in     /Library/Audio/Apple Loops/Apple
called                         Apple Loops for Soundtrack Pro
Now copy all files from    'Apple Loops for Garageband'
                           to       'Apple Loops for Soundtrack Pro'
By creating the folder 'Apple Loops for Soundtrack Pro', it livens its existing link within Final Cut Pro X,
so when you are in Final cut and go to the 'Music and Sound' icon you can now see the folder has changed from gray to blue, and you can see any files you copied into it.
Cheers to all the help from others in trying to understand Finder.

How to find GUI SQL*Plus command tool in Oracle 8i (version 8.1.7)

I had installed Oracel 8i Enterprise Edition (version 8.1.7) on my server machine (Windows NT 4.0), I'd like to use Oracle Navigator (GUI SQL*PLUS command tool), but I can not find it from the menu. I know Oracle Navigator is available in Oracle 7. Can anyone tell me where and how to use GUI SQL*PLUS command tool in Oracle 8i Enterprise Edition (version 8.1.7) ?
thanks a lot.
David Zhu

Hi
Oracle Navigator is part of Personal Oracle7 and Oracle Lite. I don't know is it available in 8i Personal Edition but I am sure that it is not part of Standard and Enterprise Edition.
Regards
null

How do I access my time capsule using a Ethernet cable connected to my pc?

I am trying to access my saved files on my time capsule. I don't have internet so I'm trying to use an Ethernet cable. I'm using a PC laptop not a Mac. I have no idea how to access them.

Load the airport utility for windows.. as that helps by loading the bonjour for windows service.
Then open windows explorer and type the IP of the TC directly which you will find in the airport utility.
\\10.0.1.1 (that is default.. replace with whatever the actual is).

How do I use my ethernet connection for printing on my LAN and use my Wifi on a different router and ISP to connect to the internet?

I'm in a small office, and I have to use my ethernet connection to connect to the networked copier to be able to print, but connection to which I hooked my Time Capsule is literally 20x faster when connecting to the internet.
How can I tell the computer to use the ethernet connection to print, while everything else should go through wifi?
I have been manually going back and forth changing the order in Network Preferences between ethernet and Wifi, but I'm know there must be an easier way. Thanks for your help!

A packet going to Apple is not local. It is going to 17.149.160.49 -- So it is sent to the topmost working connection to be Routed and sent to the Internet.
A packet going to a local computer or other device that is on the same subnet (has an IP address very close to the topmost IP Address of your computer) gets sent out that port as well, but is sent directly to that computer on the local subnet, since no Routing [changing of Addresses} is needed.
A packet going to a local computer or Printer or Network Attached Storage device that is not on the topmost subnet, but is on a secondary subnet such as the second network connection would be sent directly to that computer, since no Routing is needed.
I do not understand why two Routers have the same IP Address if they are not cross-connected. That makes everything very difficult when it should be simple.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

I have just used migration assistant to import photos (using an ethernet cable) from my PC. It has worked but they have gone into a new user on my MacPro. How can I merge them into the one user account.

How many pictures (or how many bytes) are we talking? Now that the pictures are imported one way to cross users is to use a removable drive (although large volumes of files preclude this).
The other is to login as the user where the pictures are, then copy them into the public drop box of the user where you want the picture.
The arrow is showing (in ths example) copy files from the Pictures folder for my user to the guest user accounts public dropbox. When you do this you may have to authenticate and you won't be able to see the results of the copy until you log in as the other user.
All users are in the folder "/Users/"

I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
Thanks.

Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
If possible, please try Indesign CS 4.

How do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though

how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though

A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.

How to setup and configure NI OPC Server to OMRON PLC (CJ2H model) using FINS Ethernet communication protocol?

Hi,
Could someone help me in the setup and configuration of NI OPC server to OMRON PLC (CJ2H model) using FINS Ethernet communication protocol? I already read some materials available in the web but it uses a different PLC and communication protocol. The OPC server is installed in my laptop and I'm using Windows 8 as my OS. I used a cross over RJ45 LAN cable and connected to the ETN21 module of the PLC. I was able to confirmed the communication of my laptop and PLC by pinging the ip address of the ETN21. I also tried to configure the OPC server based on the documents I just read online. I created a channel, device and tag to the OPC server. By the way, I just need to read the data from the tag I created. Can someone also tell me how to monitor the data on the tag? I hope that you could help me. Thank you in advance.

Good day,
Try following the instructions on the driver’s help, take a look at the attach picture. It should be a good starting point. After the PLC is configured you can use this tutorial (Connect LabVIEW to Any PLC Using OPC » http://www.ni.com/white-paper/7450/en/) for a guide on how to monitor the tags.
I hope this helps
Alejandro | Academic Program Engineer | National Instruments
Attachments:
OPC Server Help.JPG ‏237 KB

HT3529 how i use key board

How i use key board specially typing of upper case letter

Press the shift key (looks like an up arrow). Then press the letter you wish to type in upper case.

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

Plug in ethernet .. in the computer.. turn off wireless.

I can not find how to use the basic Mac air keyboard. where do i find it or do a tutorial board

I am new to the Mac worls and hardly used a PC . I used a Blackberry. How can i find how to use the macair key board. I can not get the plus sign or the brackets on my leyboard to work. The option key is called the atl key.. There is no easy guide for how to use all the Buttons on the Key board. where do i find them

Hello Sanjit_Das:
sorry for my english again !.
My purpose is almost the same as this:
https://forums.adobe.com/message/6137964#6137964#6137964
But I do not know which path must specify when the video is uploaded to assets:
Sorry to ask something so absurd.
I tried putting all
<source src = "assets / Myvideo.mp4" />
not working
<source src = "C: \ Users \ Angel \ Downloads \ NEW \ pruebamusevideo \ assets/Myvideo.mp4">
not work.
etc
Presenting want to work from any computer, DVD, memory stick ...
I'm going crazy.
I know it's something about the route.
From muse Vimeo links to work, but when I export them to HTML not working. I guess it's a problem related to the same.
Thank you very much again.

How do I display ethernet connection is being used rather than WI-FI connection in the menu bar/elsewhere?

I have a new 13" retina MacBook Pro - I have wi-fi connection but also a thunderbolt/ethernet adapter that allows me to connect to my network
Sometimes, the ethernet connection does not connect and I do not notice for a while (possibly a dodgy TP-LINK plug adapter thingy)
My question is - how can I display that I am connected/using the ethernet connection rather than the wi-fi? The wi-fi symbol stays in the menu bar but it would be nice to see that I am using the ethernet connection instead
Many thanks
Mike

I don't think you can do that. You can only display the WiFi connection on the menu bar.

(VC707 board) How to use an Ethernet on XPS tool.?

Similar Messages

Maybe you are looking for