Vendor Master Activity

I want to clean up our Vendor Master File. I need to get a list of all Vendors with no activity over the last 3 years. It's seems this would be a standard report but I do not see one that meets this needs. How do I get a list of Vendors that can be flagged for deletion?

Hi
There are no standered report for that..you have to pulled from table wise
Go to se16 enter table same .......
LFA1 General ,
LFB1,Company code level
LFC1,
For open items: BSIK,Clearied items BSAK
I hope it will helps
Regards
vamsi

Similar Messages

Vendor Master Activity / In-Activity report

Dear SAP fellow grus'
Is there any vendor master report that shows when a vendor was last used?
Thanks,
Chet

Hello !
There is no standard report for that, but you could maybe create a report to run RBKP or any other table you believe is relevant for your meaning of "used". And when the vendor number is found, you extract the Entry Date.
Best Regards!
Plauto

Activation of new fields in Vendor Master

Hi Experts,
Fields "Acct clk tlf", "Clerk's fax" and "Clrk's internet" are made available (activated) for editing in Vendor Master - maintained at company code level in Correspondane tab.
Would like to know whether availability of this fields will affaect the existing solution. What are the testing scenarios that need to be tested for this change?
Kindly assist.
Brgds

Hi,
I was wondering, can we use the fax and email on this tab "clerk at vendor" on vendor master to send a payment advice? Or rather, we are having an issue whereby, the address to send the PO to the vendor and vendor address to send the remittance advice is different. Hence, when the PO team is sending a PO to the vendor via email, they ensure that the address is what they need, when the AP team is sending the remittance advice, they have to change the address again to what they need because if they don't, the advice will be sent to the PO vendor address which is different.
DO you have any insight on how we can solve this problem?
Your help is highly appreciated.
Thanks

Multiple active emails on the Vendor master

We would like to use multiple emails for a vendors .
One to send PO's and Second to send payment advice to the Vendors .
Could you please suggest options to maintain two active emails addresses ?
Thank you in advance

Hi,
If you have maintained the payment term in the Purchase Order, it will overwrite the payment term which is maintained in the Vendor Master. If no payment term is maintained in the PO, then the payment term which is maintained in the Vendor Master will be considered.
Regards,
Amit

How do I see whether a vendor master is active or not?

Hi,
There is a vendor master created in production, and I want to know which Tcode or field do I see whether the status is ACTIVE or not?
Regards

Hi,
GO to MKVZ
and generate Report...
there you can see the Change Lay out Button (14 th button from Left)
Click that one it will show you the below fields..
Central purchasing block
Block function
Central deletion flag
Slect them you will get that report..
Thx
Raju

Vendor Master IDOC (CREMAS) and change pointer activation..

Hi Guys..
I am using CREMAS idoc to transfer Vendor Master data to 3rd party system..
I configure the change pointer in SALE..
BDCP
BD61
BD50
BD52
But when I make changes in vendor master.. its not creating the idoc immediately.. I have to run RBDMIDOC manually.. to create the idoc..
How to make it create immediately.. ?
Also if I make a change in Email.. its not creating idoc at all.. !
Thanks for Ur time..

posting it in data transfer forum..

Field LFM1-BLIND (Doc index active) in the vendor master record

Hello -
I am going through OSS note # 1819416 which describes about automatic price updates. I am not getting any field LFM1-BLIND for setting this check box in XK02 ( step # 3), even I checked for field status and relevant field is not there.
How to activate vendor for that check box? is there any dependent setting for this?
Let me know if anyone knows about it. Thanks in advance.

Hi,
The field is available in ECC (even without Retail), in vendor master - purchasing view as shown below:
You may check in OMSG transaction, whether the field is made optional for the account group as shown below:
Regards,
AKPT

Activation of Contact Person Screen in vendor master

Hello All,
I need to activate Contact person screen in vendor master so that i can fill the details like name email etc.
I need to activate this for allvendor master transactions in ECC 6.
Thanks in advance for help!
Regards
Himanshu

Hello,
Thanks for your reply.
I was going through the same path
Logistic general>business partner>vendor>define transaction dependent- screen layout
and i saw the option for supression , required , optional etc for Contact details screen.
Please let me know the difference in path you have mentioned and i explored.
Thanks
Himanshu Nijhawan

Added new fields in vendor master in xk01 but data is not getting saved

Hi experts,
To add new fields in vendor master i have followed the following steps :
1.) Appended a structure ZRTGS in LFA1 table with required fields and activated
2.) Added new button in xk01( vendor master ) using spro -> logistics-general -> business partner -> vendors ->
control ->adoption of customer's owaster data fields -> prepare modification free-enhancement of vendor master record
Created a screen group ZR and defined label tab pages with function code ZRTGS and saved entries
3.) Created a implementation for BADIs VENDOR_ADD_DATA and VENDOR_ADD_DATA_CS.
4.) Created a program with my own subscreen for the required fields
The button is getting displayed in XK01, XK02 and XK03 respectively. Whenever the button is clicked the subscreen with
the fields is also displayed. But whenever i try to save the data in either XK01 or XK02 it is not getting saved in to the
database table LFA1.
Request your help in this regard.
Thanks in Advance.

Hi,
You may need to check this include .
EXIT_SAPMM06E_008 -->Import Data from Customer Subscreen for Purchasing Document
Thanks,
vamshi

Vendor Master Extraction from Legacy

Hi guys,
We have 2 different legacy systems here (4.5b and 4.6c) and I am trying to extract the vendor master from both of them and integrate them into the new mysap2004.
What is the best way to extract the vendor master along with the address , punchasing doc, bank details, partner functions,etc ? Any sample program for vendor master extraction is most welcome. Here is my extract layout.
ADDRESS
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
SZA1_D0100     Title (TITLE_MEDI)     CHAR/30          Not used
ADDR1_DATA     Name (NAME1)     CHAR/40          Bring values over as is.
ADDR1_DATA     Name (NAME 2)     CHAR/40          Bring values over as is.
ADDR1_DATA     Name (NAME 3)     CHAR/40          Bring values over as is.
ADDR1_DATA     Name (NAME 4)     CHAR/40          Bring values over as is.
ADDR1_DATA     Search Term 1 (SORT1)     CHAR/20          Convert to HPC methodology.
O-First 8 char. of vendor name
R- First 8 char. of vendor name
B- First 8 char. of vendor name
ADDR1_DATA     Search Term 2 (SORT2)     CHAR/20          Bring values over as is.
ADDR1_DATA     Street/House Number
(Street)     CHAR/60          Bring values over as is.
ADDR1_DATA     House Number
(HOUSE_NUM1)     CHAR/10          Bring values over as is.
ADDR1_DATA     Building (number or code)
(BUILDING)     CHAR/20          Bring values over as is.
ADDR1_DATA     Room or apartment number
(ROOMNUMBER)     CHAR/10          Bring values over as is.
ADDR1_DATA     Floor in building
(FLOOR)     CHAR/10          Bring values over as is.
ADDR1_DATA     c/o name
(NAME_CO)     CHAR/40          Bring values over as is.
ADDR1_DATA     Street 2
(STR_SUPPL1)     CHAR/40          Bring values over as is.
ADDR1_DATA     Street 3
(STR_SUPPL2)     CHAR/40          Bring values over as is.
ADDR1_DATA     Street 4
(STR_SUPPL3)     CHAR/40          Bring values over as is.
ADDR1_DATA     Street 5
(LOCATION)     CHAR/40          Bring values over as is.
ADDR1_DATA     City
(CITY1)     CHAR/40          Bring values over as is.
ADDR1_DATA     District
(CITY2)     CHAR/40          Bring values over as is.
ADDR1_DATA     City (different from postal city)
HOME_CITY     CHAR/40          Bring values over as is.
ADDR1_DATA     City postal code
(POST_CODE1)     CHAR/10          Zip Code. Bring values over as is.
ADDR1_DATA     Country
(COUNTRY)     CHAR/3          Bring values over as is.
ADDR1_DATA     Region (State, Province, County)
(REGION)     CHAR/3          E.g., NJ New Jersey, CO Colorado, etc.   Bring values over as is.
ADDR1_DATA     Time Zone
(TIME_ZONE)     CHAR/6          Bring values over as is.
ADDR1_DATA     Transportation Zone
(TRANSPZONE)     CHAR/10          Bring values over as is.
ADDR1_DATA     Regional Structure Group
(REGIOGROUP)     CHAR/8          Bring values over as is.
ADDR1_DATA     P. O. Box
(PO_BOX)     CHAR/10          Bring values over as is.
ADDR1_DATA     P.O. Box Postal Code
(POST_CODE2)     CHAR/10          Bring values over as is.
ADDR1_DATA     Language Key
(LANGU)     LANG/1          Bring values over as is.
SZA1_D0100     Telephone
(TEL_NUMBER)     CHAR/30          Bring values over as is.
SZA1_D0100     Telephone Number Extension
(TEL_EXTENS)     CHAR/10          Bring values over as is.
SZA1_D0100     Fax
(FAX_NUMBER)     CHAR/30          Bring values over as is.
SZA1_D0100     Fax Extension Number
(FAX_EXTENS)     CHAR/10          Bring values over as is.
SZA1_D0100     E-mail
(SMTP_ADDR)     CHAR/240          Bring values over as is.
ADDR1_DATA     Standard Communication Type
(DEFLT_COMM)     CHAR/3          Bring values over as is.
ADDR1_DATA     Data Line
(EXTENSION1)     CHAR/40          Not used.   Do not bring over field values.
Note: This field will be available to populate with other data during the conversion.
ADDR1_DATA     Telebox
(EXTENSION2     CHAR/40          Not used.   Do not bring over field values.
Note: This field will be available to populate with other data during the conversion.
ADDR1_DATA     Comments
(REMARK)     CHAR/50          Bring values over as is.
CONTROL
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
LFA1     Customer
(KUNNR)     CHAR/10          Bring values over as is.
LFA1     Authorization
(BEGRU)     CHAR/4          It is to be determined if this field will be used in the future.   If yes, bring values over as is from HPC and populate with vendor account group code for Foods.
LFA1     Trading Partner
(VBUND)     CHAR/6          Bring values over as is.
LFA1     Group Key
(KONZS)     CHAR/10          Not used
LFA1     Tax Code 1
(STCD1)     CHAR/16          Bring values over as is.
LFA1     Tax Code 2
(STCD2)     CHAR/11          Bring values over as is.
LFA1     Fiscal Address
(FISKN)     CHAR/10          Bring values over as is.
LFA1     Jurisdiction Code
(TXJCD)     CHAR/15          Bring values over as is.
LFA1     VAT Registration No.
(STCEG)     CHAR/20          Bring values over as is.
LFA1     Tax Office
(FISKU)     CHAR/10          Bring values over as is.
LFA1     Tax Number
(STENR)     CHAR/18          Bring values over as is.
LFA1     Industry
(BRSCH)     CHAR/4          Bring values over as is.
LFA1     Train Station
(BAHNS)     CHAR/25          Not used.
LFA1     Transportation Zone
(LZONE)     CHAR/10          Bring values over as is.
LFA1     Actual QM Sys.
(QSSYS)     CHAR/4          Bring values over as is.
LFA1     QM System To
(QSSYSDAT)     DATS/8          Bring values over as is.
LFA1     DAK
(J_1FDAK)     CHAR/8          Bring values over as is.
PAYMENT TRANSACTIONS
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
LFBK     Bank Country Key
(BANKS)     CHAR/3          Bring values over as is.
LFBK     Bank Key
(BANKL)     CHAR/15          Bring values over as is.
LFBK     Bank Account
(BANKN)     CHAR/18          Bring values over as is.
BNKA     Bank Name
(BANKA)     CHAR/60          Foods - Bring values over as is.
HPC Populate with Bank Account Number
LFA1     Alternative Payee
(LNRZA)     CHAR/10          Bring values over as is.
LFA1     Individual Spec.
(XZEMP)     CHAR/1          Bring values over as is.
LFA1     Spec. Per. Reference
(XLFZA)     CHAR/1          Bring values over as is.
ACCOUNTING INFORMATION ACCOUNTING
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
LFB1     Recon. Account
(AKONT)     CHAR/10          Bring values over as is.
LFB1     Sort Key
(ZUAWA)     CHAR/3          Bring values over as is.
LFB1     Head Office
(LNRZE)     CHAR/10          Bring values over as is.
LFB1     Authorization
(BEGRU)     CHAR/4          Bring values over as is.
LFB1     Cash Mgmnt Group
(FDGRV)     CHAR/10          Bring values over as is.
LFB1     Release Group
(FRGRP)     CHAR/4          Bring values over as is.
LFB1     Minority Indicator
(MINDK)     CHAR/3          Bring values over as is.
LFB1     Certification Date
(CERDT)
     DATS/8          Bring values over as is.
LFB1     Interest Indicator
(VZSKZ)     CHAR/2          Bring values over as is.
LFB1     Last Key Date
(ZINDT)     DATS/8          Bring values over as is.
LFB1     Interest Cycle
(ZINRT)     NUMC/2          Bring values over as is.
LFB1     Last Interest Run
(DATLZ)     DATS/8          Bring values over as is.
LFB1     Withholding Tax Code
(QSSKZ)     CHAR /2          Bring values over as is.
LFB1     Withholding Tax Country
(QLAND)     CHAR /3          Bring values over as is.
LFB1     Recipient Type
(QSREC)     CHAR /2          Bring values over as is.
LFB1     Exemption Number
(QSZNR)     CHAR /10          Bring values over as is.
LFB1     Valid Until
(QSZDT)     DATS/8          Bring values over as is.
LFB1     Exemption Authority
(QSBGR)     CHAR /1          Bring values over as is.
LFB1     Previous Account No.
(ALTKN)     CHAR /10          Do not bring over existing values. Will populate during vendor conversion when legacy vendor number is replaced by a new vendor number.
LFB1     Personnel Number
(PERNR)     NUMC/8          Bring values over as is.
PAYMENT TRANSACTIONS ACCOUNTING
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
LFB1     Payment Terms
(ZTERM)     CHAR/4          Refer to data mapping spreadsheet later in this spec.
LFB1     Tolerance Group
(TOGRU)     CHAR/4          Bring values over as is.
LFB1     Credit Memo Terms
(GUZTE)     CHAR/4          Bring values over as is.
LFB1     Chk. Double Inv.
(REPRF)     CHAR/1          Bring values over as is.
LFB1     Chk. Cashing Time
(KULTG)     DEC/3          Bring values over as is.
LFB1     Payment Methods
(ZWELS)     CHAR/10          Refer to data mapping spreadsheet later in this spec.
LFB1     Alternate Payee
(LNRZB)     CHAR/10          Bring values over as is.
LFB1     Individual Payment
(XPORE)     CHAR/1          Bring values over as is.
LFB1     Bill of Exchange Limit
(WEBTR)     CURR/13
Decimal/2     9999999999999.99     Bring values over as is.
LFB1     Payment Advance By EDI
(XEDIP)     CHAR/1          Bring values over as is.
LFB1     Payment Block
(ZAHLS)     CHAR/1          Bring values over as is.
LFB1     House Bank
(HBKID)     CHAR/5          Not used.   Do not bring forward existing values.
LFB1     Grouping Key
(ZGRUP)     CHAR/2          Bring values over as is.
LFB1     Payment Method Supplement
(UZAWE)     CHAR/2          Bring values over as is.
LFB1     Alternate Payee Indicator
(XLFZB)     CHAR/1          Bring values over as is.
LFB1     Tolerance Group
(TOGRR)     CHAR/4          Bring values over as is.
CORRESPONDENCE ACCOUNTING
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
LFB5     Dunning Procedure
(MAHNA)     CHAR/4          Bring values over as is.
LFB5     Dunning Recipient
(LFRMA)     CHAR/10          Bring values over as is.
LFB5     Last Dunned
(MADAT)     DATS/8          Bring values over as is.
LFB5     Dunning Clerk
(BUSAB)     CHAR/2          Bring values over as is.
LFB5     Dunning Block
(MANSP)     CHAR/1          Bring values over as is.
LFB5     Legal Dunning Proceedings
(GMVDT)     DATS/8          Bring values over as is.
LFB5     Dunning Level
(MAHNS)     NUMC/1          Bring values over as is.
LFB1     Grouping Key
(MGRUP)     CHAR/2          Bring values over as is.
LFB1     Local Processing
(XDEZV)     CHAR/1          Bring values over as is.
LFB1     Acct. Clerk
(BUSAB)     CHAR/2          Bring values over as is.
LFB1     Account with Vendor
(EIKTO)     CHAR/12          Bring values over as is.
LFB1     Clerk at Vendor
(ZSABE)     CHAR/15          Bring values over as is.
LFB1     Acct. Clk. Tel. No.
(TLFNS)     CHAR/30          Bring values over as is.
LFB1     Clerks Fax
(TLFXS)     CHAR/31          Bring values over as is.
LFB1     Clerks Internet
(INTAD)     CHAR/130          Bring values over as is.
LFB1     Account Memo
(KVERM)     CHAR/30          Bring values over as is.
PURCHASING DATA
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
LFM1     Order Currency
(WAERS)     CUKY/5          Bring values over as is.
LFM1     Terms of Payment
(ZTERM)     CHAR/4          Refer to data mapping spreadsheet later in this spec.
LFM1     Incoterms (Part 1)
(INCO1)     CHAR/3          Refer to data mapping spreadsheet later in this spec.
LFM1     Incoterms (Part 2)
(INCO2)
     CHAR/28          Bring values over as is.
LFM1     Minimum Order Value
(MINBW)     CURR/13
Decimal/2     9999999999999.99     Bring values over as is.
LFM1     Schema group, vendor
(KALSK)     CHAR/2          Bring values over as is.
LFM1     Pricing Date Cat.
(MEPRF)     CHAR/1          Bring values over as is.
LFM1     Order Optim. Rest
(BOPNR)     CHAR/4          Bring values over as is.
LFM1     Salesperson
(VERKF)     CHAR/30          Bring values over as is.
LFM1     Telephone
(TELF1)     CHAR/16          Bring values over as is.
LFM1     Acc. With Vendor
(EIKTO)     CHAR/12          Bring values over as is.
LFM1     GR. Based Inv. Verif.
(WEBRE)     CHAR/1          Bring values over as is.
LFM1     Auto.Eval. GR Setmt. Del.
(XERSY)     CHAR/1          Bring values over as is.
LFM1     Auto.Eval. GR Setmt. Ret.
(XERSR)     CHAR/1          Bring values over as is.
LFM1     Acknowledgement Reqd.
(KZABS)     CHAR/1          Bring values over as is.
LFM1     Automatic Purchase Order
(KZAUT)     CHAR/1          Bring values over as is.
LFM1     Subsequent Settlement
(BOLRE)     CHAR/1          Bring values over as is.
LFM1     Subseq. Sett. Index
(BOIND)     CHAR/1          Bring values over as is.
LFM1     B. Vol.Comp./Ag. Nec.
(UMSAE)     CHAR/1          Bring values over as is.
LFM1     Doc. Index Active
(BLIND)     CHAR/1          Bring values over as is.
LFM1     Returns Vendor
(KZRET)     CHAR/1          Bring values over as is.
LFM1     Srv.-Based Inv. Ver.
(LEBRE)     CHAR/1          Bring values over as is.
LFM1     ABC Indicator
(LFABC)     CHAR/1          Bring values over as is.
LFM1     Mode Of Transport-Border
(EXPVZ)     CHAR/1          Bring values over as is.
LFM1     Office of Entry
(ZOLLA)     CHAR/6          Bring values over as is.
LFM1     Sort Criterion
(SKRIT)     CHAR/1          Bring values over as is.
LFM1     PROACT Control Prof.
(PAPRF)     CHAR/4          Bring values over as is.
LFM1     Revaluation Allowed
(XNBWY)     CHAR/1          Bring values over as is.
LFM1     Grant Discount In Kind
(NRGEW)     CHAR/1          Bring values over as is.
LFM1     Relevant for Price Determination
(PRFRE)     CHAR/1          Bring values over as is.
LFM1     Relevant for Agency Business
(AGREL)     CHAR/1          Bring values over as is.
LFM1     Shipping Conditions
(VSBED)     CHAR/2          Bring values over as is.
LFM1     Purchasing Group
(EKGRP)     CHAR/3          Bring values over as is.
LFM1     Planned Delivery Time
(PLIFZ)     DEC/3          Bring values over as is.
LFM1     Confirmation Control
(BSTAE)     CHAR/4          Bring values over as is.
LFM1     Unit of Measure Group
(MEGRU)     CHAR/4          Bring values over as is.
LFM1     Rounding Profile
(RDPRF)     CHAR/4          Bring values over as is.
LFM1     Price Marking Agreed
(LIPRE)     CHAR/2          Bring values over as is.
LFM1     Rack jobbing service agreed
(LISER)     CHAR/1          Bring values over as is.
LFM1     Order entry by vendor
(LIBES)     CHAR/1          Bring values over as is.
LFM1     Serv. Level
(VENSL)     DEC/4
Decimal/1          Bring values over as is.
PARTNER FUNCTIONS
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
WYT3     Partner Function
(PARVW)     CHAR/2          Bring values over as is.
WRF02K     Number (Partner)
(GPARN)     CHAR/10          Map to new partner number in vendor correlation table.
ALTERNATE DATA
(Purchasing Data)
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
LFM2     Order Currency
(WAERS)     CUKY/5          Bring values over as is.
LFM2     Terms of Payment
(ZTERM)     CHAR/4          Refer to data mapping spreadsheet later in this spec.
LFM2     Incoterms (Part 1)
(INCO1)     CHAR/3          Refer to data mapping spreadsheet later in this spec.
LFM2     Incoterms (Part 2)
(INCO2)
     CHAR/28          Bring values over as is.
LFM2     Minimum Order Value
(MINBW)     CURR/13
Decimal/2          Bring values over as is.
LFM2     Schema group, vendor
(KALSK)     CHAR/2          Bring values over as is.
LFM2     Pricing Date Cat.
(MEPRF)     CHAR/1          Bring values over as is.
LFM2     Order Optim. Rest
(BOPNR)     CHAR/4          Bring values over as is.
LFM2     Salesperson
(VERKF)     CHAR/30          Bring values over as is.
LFM2     Telephone
(TELF1)     CHAR/16          Bring values over as is.
LFM2     Acc. With Vendor
(EIKTO)     CHAR/12          Bring values over as is.
LFM2     GR. Based Inv. Verif.
(WEBRE)     CHAR/1          Bring values over as is.
LFM2     Auto.Eval. GR Setmt. Del.
(XERSY)     CHAR/1          Bring values over as is.
LFM2     Auto.Eval. GR Setmt. Ret.
(XERSR)     CHAR/1          Bring values over as is.
LFM2     Acknowledgement Reqd.
(KZABS)     CHAR/1          Bring values over as is.
LFM2     Automatic Purchase Order
(KZAUT)     CHAR/1          Bring values over as is.
LFM2     Subsequent Settlement
(BOLRE)     CHAR/1          Bring values over as is.
LFM2     Subseq. Sett. Index
(BOIND)     CHAR/1          Bring values over as is.
LFM2     B. Vol.Comp./Ag. Nec.
(UMSAE)     CHAR/1          Bring values over as is.
LFM2     Doc. Index Active
(BLIND)     CHAR/1          Bring values over as is.
LFM2     Returns Vendor
(KZRET)     CHAR/1          Bring values over as is.
LFM2     Srv.-Based Inv. Ver.
(LEBRE)     CHAR/1          Bring values over as is.
LFM2     ABC Indicator
(LFABC)     CHAR/1          Bring values over as is.
LFM2     Mode Of Transport-Border
(EXPVZ)     CHAR/1          Bring values over as is.
LFM2     Office of Entry
(ZOLLA)     CHAR/6          Bring values over as is.
LFM2     Sort Criterion
(SKRIT)     CHAR/1          Bring values over as is.
LFM2     PROACT Control Prof.
(PAPRF)     CHAR/4          Bring values over as is.
LFM2     Revaluation Allowed
(XNBWY)     CHAR/1          Bring values over as is.
LFM2     Grant Discount In Kind
(NRGEW)     CHAR/1          Bring values over as is.
LFM2     Relevant for Price Determination
(PRFRE)     CHAR/1          Bring values over as is.
LFM2     Relevant for Agency Business
(AGREL)     CHAR/1          Bring values over as is.
LFM2     Shipping Conditions
(VSBED)     CHAR/2          Bring values over as is.
LFM2     Purchasing Group
(EKGRP)     CHAR/3          Bring values over as is.
LFM2     Planned Delivery Time
(PLIFZ)     DEC/3          Bring values over as is.
LFM2     Confirmation Control
(BSTAE)     CHAR/4          Bring values over as is.
LFM2     Unit of Measure Group
(MEGRU)     CHAR/4          Bring values over as is.
LFM2     Rounding Profile
(RDPRF)     CHAR/4          Bring values over as is.
LFM2     Price Marking Agreed
(LIPRE)     CHAR/2          Bring values over as is.
LFM2     Rack jobbing service agreed
(LISER)     CHAR/1          Bring values over as is.
LFM2     Order entry by vendor
(LIBES)     CHAR/1          Bring values over as is.
LFM2     Serv. Level
(VENSL)     DEC/4
Decimal/1          Bring values over as is.
ALTERNATE DATA
(Partner Functions)
Source File /Table Name     Field Name     Field Type / Length     Format     Rule / Logic
WYT3     Partner Function
(PARVW)     CHAR/2          Bring values over as is.
WRF02K     Number (Partner)
(GPARN)     CHAR/10          Map to new partner number in vendor correlation table.

Hi Shareen,
Have you looked Master Data Distribution (ALE) for Vendor since your legacy system are SAP?
Please check t/code BD14 (Send Vendor Master Data) and BD15 (Get Vendor Master Data).
Hope this will give you an idea.
Regards,
Ferry Lianto

Program for customer and vendor master

Hi All,
I am working with ale-idocs. could you plese tell me the program name for transferring the customer and vendor master data.
thanks in adavance,
Sugeet.

Hi Sugeet,
You can transfer the Customer/Vendor master data by activating change pointers or by using RBDSEDEB/RBDSECRE programs manually by giving the customer or vendor number. But for both the methods you need to configure the partner profile settings.
Regards,
Rajesh

Report for vendor master changes

Good day,
Please can you assist with this issue,
Report S_ALR_87012089,program RFKABL00
Version ECC 6.0
This report does not reflect the old and the new values for changed bank details.
It does not show anything under the old value and shows **deleted** and **created** for new values.
Thanks in advance

You will have to do configuration in T Codes OBAT and OBAU to achieve what you want in the report.
Check the IMG activity documentation for the following.
SPRO -> IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Define Field Groups for Vendor Master Records.
SPRO -> IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Group Fields for Vendor Master Records.
Also read the RFKABL00 program documentation.

Vendor master Comparision

Hi All,
I have extracted the list of vendor codes from F.48 with selection parameter "Not created in Financial Accounting".
Now when i am running those list of vendor in LFB1 table, i am geting the company code.
As per my understanding "Not created in Financial Accounting" shold mean that the vendor masters arenot created at company code level.
Then why those vendor masters are showing with company codes in LFB1 table? Is my understanding right? How much can i rely on f.48 report?
Thanks & Regards,
Indranil

I completely agree with you. And thats where my point lies.
(1) I have executed F.48 with the condition "Not created in Financial Accounting". So the data extracted should be of those vendor codes which are activated in certain Porg but not activated in any of the company codes.
(2) Now when i am checking those vendor masters in LFB1 then logically there should no data exsist. But strangly when i am executing those vendor master records (Extracted in Step 1 from F.48) in LFB1,it is showing that those vendor codes are activated in certain company codes.
Please respond.
Thanks & Regards,
Indranil
Edited by: INDRANIL BHATTACHARYYA on Oct 16, 2011 10:56 AM

Vendor Master Extraction

Hello,
I have successfully activated 0vendor_attr and 0vendor_text. The extract structure name, BIW_LFA1_S, and description indicate that this is vendor master data from table LFA1.
My requirement is to also extract data from tables LFB1 and LFM1.
Using transaction code RSA5, I am not able to identify a business content datasource whose extract structure corresponds to these two OLTP system tables.
Using SE11 I have verified that the structure BIW_LFB1_S and BIW_LFM1_S exist in the OLTP system.
How can I activate these two datasources?
Thanks in advance for your assistance.
Mark
Message was edited by: Mark Castaldi
Found the business content data sources under SAP-R/3 - LO - LO-IO: 0ven_compc and 0ven_purorg.

Hi Mark,
You can try creating your own datasources in RSO2 using these structures for extraction.
Hope this helps...

Masking Certain Field in Vendor Master Data

We have a Enhancement which involves conversion of Vendor Numbers.,It so happened that a category of Vendor Codes were the Social Security Numbers.
Now that due to Privacy Laws etc they are converting that number logic which is throwing challanges.
The first Step is to convert Vendors from XSSN to Y123 and the second is also retain the social number in a encrypted field as it is used for 1099 reporting.
I am aware that there is a standard functionality for Credit Cards Numbers Masking but not sure if there is any thing for special fields on Vendor Master.
If you are aware of any options to handle the switchover or masking certain fields pls share them with me.
Thanks,
Praveen

Praveen,
Did you try 'Define Screen Layout per Activity (Vendors)' and suppress/hide the fields?

Vendor Master Activity

Similar Messages

Maybe you are looking for