Verity and WYSIWYG content return display

I have created a CMS using ColdFusion MX 7. I am having
issues with the returned display of the indexed database query. All
of the page styling and image code is contained in the in the
database so when the verity search is returned it returns all of
the html/css and image reference code that is contained in the
database field. Is there a way to strip all of the html/css and
image references out of the return results? Or is there a way to
strip them out before the database is ever indexed.

Either before you index or before you display, do the
following:
<cfset cleanText -
REreplace(dirtyText,'<[^>]*?>','','ALL') />
This will strip out any HTML taqgs.

Similar Messages

  • TOC Topic content not displayed in WYSIWYG Editor

    I use RoboHelp X5. When I click a topic in the TOC pane I
    expect to see its contents displayed in the WYSIWYG Editor. Instead
    the WYSIWYG pane is grey and the TrueCode pane is blank with a
    cursor flashing on the upper left corner!
    I searched for some similar issue on this forum and could not
    find it. However, I did gather that I could use another editor by
    right clicking a topic when in the Project tab and selecting one of
    5-6 editors. I tried RoboHelp TrueCode and was amazed and relieved
    to see the code and content for the topic displayed in the TrueCode
    pane...so I went a step further and tried the WYSIWYG editor and
    wonder of wonders, the topic content was displayed.
    Can someone please tell me what is going on? Should I
    reinstall RoboHelp X5? Why does the topic content not display when
    I click the topic from the TOC tab?

    Welcome to the forum.
    There have been posts about this but maybe your forum search
    history is not set to go back far enough.
    Rather than right click and selecting RH True Code, at the
    bottom of the editing pane there is a true code tab which will
    quickly enable you to see your code is still safe. That said, if
    you then click WYSIWYG, you don't get the view restored, usually.
    Maybe your way has an advantage.
    It's one of those things that happens now and again. I don't
    think reinstalling will help. I have had it happen several times in
    a day and then you go months with it working just fine.
    I don't believe anyone has ever lost any data. At worst you
    just have to close RH and reopen it.
    For what it is worth, I haven't seen this happen in RH7.

  • AS: InDesign CS4: contents only returns displayed text

    Hello,
    I realize that the function "contents" returns only the text displayed within the text frame.
    If the text exceeds the frame (because the frame is too small), the text that exceeds is not included in the text returned by contents of text frame MyFrame .
    How to get all the text of a text frame, including that which is not displayed?
    Thanks.
    Thomas

    hi
    TextFrame.Contents return only what is in TextFrame - if you want to get all text - you need to refer to .ParentStory, in VBS you need to write something like this:
    myTextContents = myTextFrame.ParentStory.Contents
    robin
    www.adobescripts.co.uk

  • Mail app displays No Subject, No Sender and No content in All Inboxes

    On my iPad 2 in the mail app, when looking at mail in All Inboxes my iCloud emails display with No Sender, No Subject, and No Content. If I tap on it there is "nothing to display". If I go to the iCloud inbox everything displays fine. I have multiple inboxes which include an exchange, gmail and xfinity accounts. The emails from these accounts all display fine in the All Inbox view. The Exchange is my primary work account and the iCloud is my primary home accoun tso viewing both is convenient.
    So far I have tried powering the iPad off and on. Shut the iCloud mail off and back on. Neither has worked. All messages display fine on my iPhone.
    Any suggestions?
    Thanks...Lenny

    Quit the mail app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ....
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Selection text and text elements contents not displayed

    I have a language related problem
    I have 2 servers .
    In first server I logged in english language and the selection text and text elements are displayed in English.
    The requirement is I dont want to translate these texts it should be displayed in English only even if I log into SAP with other language.
    So if I log in german I see the texts in English in the first server.
    But this is not the case with second.
    If I log in with English I see the english texts but if I do in german I am not able to see this english text with proper contents .
    Can anybody let me know if there are any settings to be done ? As its working fine in first server but not in second .
    Edited by: Jalpa Shukla on Oct 22, 2008 11:19 AM

    Hello Jalpa Shukla,
    If you want to display the text in english language only better dont use Text-element
    instead of using text element you hard the text in the program then you will display the text in same in English.
    Try in this way, If not past the code i will give the solution

  • Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.,

    Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.

    Absolutely!
    Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
        Apple won't permit PC software that infringes its proprietary apps.
        Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
        School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
        Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
        Classrooms are not able to keep up with the technology of using the iPad
        Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
        Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
    The bottom line is that we educators and technology developers are hurting our childern with petty conflicts.

  • Business Workplace Inbox : Mail Content Not Displayed

    Friends,
    We have a problem in displaying contents of the mail(SAP Inbox) in one of the PC's. When we reply w/refernce to that message the content is displayed properly. And also the same mail content is displayed properly in another PC's for the same user.
    We thought this is a GUI problem and re-installed SAP GUI(all components) but still the issue exists.
    Any other settings are required to be done to solve this problem? Can anyone please help us solving the issue?
    Note: we are using SO_DOCUMENT_SEND_API1 for creating the mail notification and the content is passed as 'RAW'.
    Thank you very much for your help and suggestions.
    Cheers,
    MS
    Message was edited by: Srinivasa Maram

    Srinivas,
    1) Is the problem only with the message being sent through custom code using SO_DOCUMENT_SEND_API1? What happens if you send a message using SAPOffice?
    2) Are the patch levels of the GUI same on both machines? Are you sure both PCs are configured exactly the same? Especially wrt to Windows & IE patches. I vaguely remember there were some issues a while ago with some IE patches. Normally in most client environments the desktops upgrades are controlled centrally and users do not have admin rights. Make sure the user has not done upgrades/installs on the PC in question. If that were the case the PC may needs to be reimaged.
    BTW - What version  are you on R/3 and SAPGUI?
    Regards,
    Ramki Maley

  • Exchange Online Management cmdlets return Display Name instead of Identity

    Hello,
    We've got an issue when managing our Exchange Online environment using remote PowerShell.
    We use Exchange management cmdlets to manage Exchange Online mailboxes. When we run, for example, the
    Get-MailboxPermission or Get-RecipientPermission
    cmdlets, it returns Display Names of the users with mailbox rights. Previously, when we initially tested remote PowerShell with Exchange Online, the cmdlets returned the
    Identity property, which is unique and worked well for us. However, currently the cmdlets return the
    Display Name, which is not unique and causes us issues. For example, in our environment there can exist two or more users with the same Display Name (see highlighted on the screenshot):
    In cases when only one of the users is granted a permission, we cannot distinguish programmatically, which of the 2 users this is. Also, we cannot run cmdlets, such as
    Get-SecurityPrincipal, to get more info about the principals who are granted the permission.
    Is it possible to get the old behavior of the cmdlets back so that they return the unique
    Identity instead of the non-unique Display Name? Or how do we workaround this?

    Hello,
    Can anyone update on this? The issue causes us HUGE problems :(

  • How do I get folders and their content to show up in the "Administrative Console"?

    We have added a few sub folders under the “webroot” folder. I did this so I could make a custom web page that generates the code need to display the video in a web page if it is one of the folders.
    My question is how do I get these folders and their content to show up in the “Administrative Console”?
    Also how do I get the videos to be logged?
    I have looked through the Server.xml and Application.xml files and the fms.ini but do not see any place, Am I not looking for the correct setting?
    Attached is a pic of the folders.
    Thanks
    Chip

    If Apache and MS do not talk to each other then where or should I be making these folders, some other location?
    Maybe under the vod folder under applications?
    Where in the “Flash Media Server” pdf would this be talked about?
    Would I edit the Application xml file?
    I am so new it hurts!
    Thank you,
    Chip

  • How to call an Oracle Procedure and get a return value in Php

    Hi Everyone,
    Has anyone tried calling an Oracle procedure from Php using the ora functions and getting the return value ? I need to use the ora funtions (no oci)because of compatibility and oracle 7.x as the database.
    The reason why I post this here is because the ora_exec funtion is returning FALSE but the error code displayes is good. Is this a bug in the ora_exec funtion ?
    My code after the connection call is as follows:
    $cur = ora_open($this->conn);
    ora_commitoff($this->conn);
    $requestid = '144937';
    echo $requestid;
    $rc = ora_parse($cur, "begin p_ins_gsdata2
    (:requestid, :returnval); end;");
    if ($rc == true) {
    echo " Parse was successful ";
    $rc2 = ora_bind ($cur, "requestid", ":requestid", 32, 1);
    if ($rc2 == true) echo " Requestid Bind Successful ";
    $rc3 = ora_bind ($cur, "returnval", ":returnval", 32, 2);
    if ($rc3 == true) echo " Returnval Bind Successful ";
    $returnval = "0";
    $rc4 = ora_exec($cur);
    echo " Result = ".$returnval." ";
    if ($rc4 == false) {
    echo " Exec Returned FALSE ";
    echo " Error = ".ora_error($cur);
    echo " ";
    echo "ErrorCode = ".ora_errorcode($cur);
    echo "Error Executing";
    ora_close ($cur);
    The Oracle procedure has a select count from a table and it returns the number of records in that table. It's defined as:
    CREATE OR REPLACE procedure p_ins_gsdata2 (
    p_requestid IN varchar2 default null,
    p_retcode OUT varchar2)
    as
    BEGIN
    SELECT COUNT (*) INTO p_retcode
    FROM S_GSMRY_DATA_SURVEY
    WHERE request_id = p_requestid ;
    COMMIT;
    RETURN;
    END;
    Nothing much there. I want to do an insert into a table,
    from the procedure later, but I figured that I start with a select count since it's simpler.
    When I ran the Php code, I get the following:
    144937
    Parse was successful
    Requestid Bind Successful
    Returnval Bind Successful
    Result = 0
    Exec Returned FALSE
    Error = ORA-00000: normal, successful completion -- while
    processing OCI function OBNDRA
    ErrorCode = 0
    Error Executing
    I listed the messages on separate lines for clarity. I don't understand why it parses and binds o.k. but the exec returns false.
    Thanks again in advance for your help. Have a great day.
    Regards,
    Rudi

    retcode=`echo $?`is a bit convoluted. Just use:
    retcode=$?I see no EOF line terminating your input. Your flavour of Unix might not like that - it might ignore the command, though I'd be surprised (AIX doesn't).
    replace the EXEC line with :
    select 'hello' from dual;
    and see if you get some output - then you know if sqlplus commands are being called from your script. You didn't mentioned whether you see the banner for sqlplus. Copy/paste the output that you get, it will give us much more of an idea.

  • Mac OS 10.5 /  I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!  I do have the OS dvd that i purchased years ago...  But my computer will not start from it on its own. My

    Mac OS 10.5 /
    I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
    I do have the OS 10.5 dvd that i purchased years ago...
    But my computer will not start from it on its own.
    My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info?  I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
    That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
    Once again there is not a copy of this file or its contents in the recycle bin...
    Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
    I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
    Lol It was a bad choice to delete this file ...
    Thanks guys

    Okay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
    Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
    Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
    Anyway here we go...
    Okay so first things first....  Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
    I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
    2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
    -------If you dont want to read through the whole story the fix is summed up in the bottom section-------
    Okay so now the SOLUTION!!!!
    By trial and error , and pure boredom I opened up my computer to clean the inside...
    AND
    "Disconnected the primary HD"
    and just because ....... REBOOTED my computer. Just to see what it would do.
    Upon restart and though it looked like it would repeat its usual cycle...
    About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
    Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
    After a bit of trial and error...
    I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
    this setting is under
    Utilities / startup disk
    After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
    So upon this discovery
    I went to the Disk Utility located under Utilities
    Highlighted my primary HD located in the left hand column
    Once highlighted ...
    In the heading section on the right I selected the option
    Erase
    in which I erased My current OS on my primary HD ...
    I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
    I FORGOT to add something... 
    Another reason why I deleted my primary HD!!!!!
    I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
    But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
    So back to the next step...
    I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
    But ofcourse it had no name because it we previously erased it.
    So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
    Which said it would take about 57 minutes ... But I believe was alot less...
    My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
    It was like I was setting up for the first time ;) asking for my registration info...
    The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!! 
    Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
    I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
    I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
    -------One more time the fix------
    *Insert your OS dvd into your dvd rom drive.
    *Unplug your primary HD or corrupted startup disk
    *Reboot your machine...
    Upon restart your primary HD will not be recognized...
    * you will then be prompted to select your language.
    Once selected
    *Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
    * Click restart...
    !!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
    If you do not replug your HD before the chime it will not be recognized.
    In that case restart again.
    Upon restart once again
    *Choose your language...
    *Click Utilities / disk utility
    In the left column select and
    *Highlight your HD ...
    Then towards the top portion / center of the page
    *Click the heading Erase
    Then on the page toward the bottom
    *Click security options
    This will then provide erase options.
    I USED THE FIRST OPTION
    "Dont erase data"...
    *click OK
    * click erase...
    Once erased which should take a few seconds
    *Cancel the disk utility...
    * Click Utilities / startup
    And your newly erased HD should now appear in the list.
    * Select your drive from the list by highlighting
    It should no longer have a name.
    *Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
    Thats it!!!!
    Once everything reinstalls re-add your personal info or registration info and you are up and running.
    Goodluck ;)

  • How do I stop the notification pop-up that 'Only secure content is displayed' that comes up nearly every time when I move to a new web page?

    This notification pop-up appears almost every time I navigate to a new page which is really annoying when I am trying to study my university subjects online.

    Firefox used to have a warning somewhat like that, but now a mix of secure and insecure content is indicated by a "globe" icon instead of a padlock icon next to the URL. The insecure content is not actually blocked.
    ''Edit: Apparently now you can block the insecure content by making a change in about:config. See cor-el's reply below.''
    It is possible you have an extension that blocks insecure content and displays that message? You could check the following tab, and use the Options button to see whether you can change the behavior:
    orange Firefox button (or Tools menu) > Add-ons > Extensions category

  • How do you get your email content to display?  Mine shows in preview but not when I open the email, How do you get your email content to display?  Mine shows in preview but not when I open the email

    How do you get your email content to display?  Yesterday, I suddenly could only see the content in preview.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • Update to 10.6.3 and having problems returning from sleep mode

    Hi,
    Updated yesterday to 10.6.3 and having issues returning the laptop from sleep mode.
    I close the lid and the laptop goes to sleep but when opening the laptop I just get a blank screen. I can hear the hard drive start up but nothing is displayed on the screen and the sleep light is constantly on. Have tried various combinations of key presses to get it back but nothing works. I end up powering the laptop off in the end.
    Anyone else have this problem? Or know how to resolve it.
    I have run daily, weekly, monthly maintenance scripts, cleared system and user cache and repaired disk permission but I'm still getting the issue. I have a Time Machine backup but it dates back a month so I'm reluctant to restore.
    Cheers,
    Luke

    I'm having a similar problem that I may have cracked. My screen is on but the backlight is off (so the image is practically 100% on resume from hibernate. Have you reset the pram and cleared the smc?

  • Chinese and Korean characters not displaying in navigation pane

    I have an issue with Chinese and Korean characters not displaying on the tabs in the navigation pane:
    I have 2 RoboHelp projects (using RoboHelp 8 with the updates installed) to generate WebHelp, one in Simplified Chinese, the other Korean. The HTML files, .HHC and .HHK were sent out for translations. I have set the appropriate language in the project settings, everything almost works, except for the text on the Contents, Index, and Search tabs. (I'm not using a skin.) I have read in various threads that the lng file should be edited using the RoboHelp interface, and this seems to be the crux of the problem. The characters do not display correctly through the RoboHelp UI.
    The computer on which I generate the WebHelp is Windows Server 2003, and I do not have the language packs installed. (And am having problems getting hold of the language packs to install to see if this fixes the problem.)
    Aside from installing the language packs, is there anything else I can try to help resolve the problem? (The characters in the content are displaying as expected.)
    Any assistance is greatly appreciated

    Perhaps something in the Translation Info section of this page might help? (The specifics are for Japanese, but I believe the issue would apply to all double-byte languages).
    http://helpware.net/FAR/far_faq.htm#JapComp

Maybe you are looking for