Version 9 - Changing out logos in Batch

I have a logo in the footer on almost every page of a pdf.
Can Version 9 do a batch to cut the old logo and paste the new one in for all the pdfs in a folder. (The pdf docs have different pagination= there is not a logo on the same page in every pdf doc.)
Is it smart enough. I don't want javascript.
Thanks,
Would you need verison 9 pro or 9 Pro extended? or Version 9 standard?

I don't think you can change the logo by a batch sequence.
Pitstop might be able to do what you want. Either someone who uses the
product can let you know for sure or you can download a trial from the
enfocus website.
Mike

Similar Messages

Issue changing the Logo on web UI

Hello all,
I have an issue where I can't get a new logo to show on our WEB UI skin.
What i've done so far..
1, I've created a BSP in se80,
2, spro > sap ref IMG > CRM > UI framework > UI framework definition > skins > Access Skin Workbench
    Select Nova and copied the Skin to a new Skin with the BSP I created in se80.
3. On my new Skin - changed the logo.png and logo.gif in all locations, ( I believe the main one is in 'styling/Lshape/Logo.png' )
    The one one that looks like the image I wanted to change was in /_images/logo.gif.
4. Assigned this Skin to my technical Profile
     spro > sap ref IMG > CRM > UI framework > define Techical Profile > <myprofile>
5. Ensured my technical profile is specified against my busines Role.
Saved my work, loaded up the web UI, hit my business Role,
6. Clicked preferences and checked my Skin was already selected, it was...
But the image that I replaced is still the original??
I've been through all the images on my new skin to see if there are any others that are the same as the main SAP logo, which there isn't - I can't understand where its getting it from, (other then the predefined skins)
Any help or advice on this would be much appreciated!
Regards
Dave
about me,
I'm fairly new to SAP with only 6 months light experience,
I have sat the CR100 and CR580 courses so have a little bit of knowledge

Hello all,
I have managed to fix it / find out what I did wrong.
in spro > sap ref IMG > CRM > UI framework > UI framework definition > skins > Define Skins.
I had created my reference to point to the NOVA files? so even thou I was editing my skin, it was only ever showing the NOVA files. - I just created a new entry pointing to my Skin and it now works..
Regards
David

Want to change company logo and address.

Hi all,
Here i have one Standard print report "SAPF130K" for customer or vendor balance conformation . But when i run this report this time i get logo of company "IDES HOLDING AG" and getting address of this company. but customer number and his address get properly but now i want to get my company logo place of this "ides holding ag" . For this i find many thing in SE71 tcode but i am still not able to change this logo and address so can u please kindly help me out how can i change this both.
Thanks in Advance.
Keyur

@ Anurag_N: This is not ALV, but SAP SCRIPT report.
Hello,
This standard report is using form F130_CONFIRM_01 for the printing purpose.
Please check in this form, how you can handle ur logo.
R u doing any config for printing this report for the form etc?
This text is coming from the window ADDRESS and the below inlude:
INCLUDE &T001G-TXTAB& OBJECT TEXT ID ADRS LANGUAGE &T001-SPRAS&, where &T001G-TXTAB& for me is coming as
ADRS_SENDER.
So, just add ur logo in the standard text ADRS_SENDER in SO10, you will c it in the sap script layout.
But, i am not sure how this variable &T001G-TXTAB& gets populated and if it will get changed for soem other value.
Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:30 PM
Edited by: Kanwardeep Singh Gill on Apr 9, 2010 12:35 PM

I have a white MacBook. I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

I have a white MacBook and I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How to change existing logo in SAP which has already been edited

Dear All,
I've been given the task of changing the logo on the SAP logon screen. i know the steps to do it...going to SMW0, changing MIME editor etc.
My problem is: that there's an edited logo already existing which is on display. i've found out the name and it is visible in the SMW0. i've gone to settings-->Assign MIME Editor
and have done setting: MIME TYPE: image/bmp; Editor: C:\Windows\System32\mspaint.exe
after saving this setting, when i click on that particulat obj. name and click on disp or change, it displays following message:
c:\windows\system32\~wwwtmp.bmp was not found
nothing else happens!
where am i going wrong...what should i do...please help.
Regards,
Tejasav

Hi Tejasav,
For assistance with this issue please see the following link which should help you out;
https://service.sap.com/sap/support/notes/1292374
Best of luck,
Derrick Hurley
ABAP Development Workbench
SAP

SAP Cloud For Customer : How to change the Logo or Image into the Standard Form Template

Hi Experts,
I have requirement to change the standard template format.
I have copy standard template and edit using Adobe Life Cycle Designer to change the logo / image.
After changed and upload modified template and change the output setting for print i can able to see the changes but logo / image can not display.
Can anyone have idea how to solve this issue ?
Can we change the template within cloud system?
If Yes than How ?
Regards,
Mithun

The following are the instructions (November 2014 version of SAP Cloud for Customer)
Edit a Form Master Template
Overview
As an administrator, you can edit existing form master templates. These are used to define the header, footer, and logos used in form templates. Form master templates also contain an e-mail disclaimer that is appended to automatically generated e-mails sent to business partners when a document is output from the system.
Procedure
1. Go to Application and User Management or Administrator Business Flexibility Master Template Maintenance .
2. In the Master Template Maintenance view, select Form Master Templates from the Show menu.
3. Select the master template you want to edit and click Edit.
4. On the Form Master Template tab, do the following:
Under Header, click Upload and browse to find the file you want as logo. Adjust the size and alignment of the logo, as required.The file formats .gif, .bmp, .jpg, .png, and .tif are supported. The logo should not be larger than 40 mm width x 20 mm height. If you upload a graphic that is larger than 40 mm x 20 mm, it is resized automatically.Select the Header Divider checkbox if you want a graphical divider to appear on your form.Under Sender Address, enter your company’s address. The sender address is shown above the recipient's address in a letter.Under Footer, choose the number of footer columns you want to display. Enter the footer text exactly as you would like it to appear on the form. You can maintain up to 4 footer blocks with a maximum of 10 lines per footer.Note that the width of each footer block is equally divided over the available space. If a line of text in the footer is too long for the current font size, the system will automatically enter a line break. If this automatic line break does not meet your needs, you may need to enter the text after the line break as a separate line.To maintain multiple languages, you must first add the language from the Add menu and then maintain the texts in that language by selecting the language from the dropdown list.
5. Click the refresh button to preview your changes. From the dropdown list under Preview, you can select a country. The preview is then displayed using the country-specific template, for example, some countries do not use sender addresses or have different paper sizes.
6. On the E-Mail Disclaimer tab, you can enter a disclaimer or other company-specific legal information.
This text is appended to the main text body of e-mails that are created when a document is output by the system. It is not possible to create separate language versions of this text; therefore if your company uses multiple communication languages, you should enter all language versions of the disclaimer here.
7. Click Save and Close.
Result
If required, you can now assign the form master template to a company/org unit and/or output channel. For more information, see the Master Template Maintenance Quick Guide.
Note that master templates can be activated and deactivated for each form template in the Form Template Maintenance view. For more information, see the Form Template Maintenance Quick Guide.

What is, "Portrait Displays" displayed: "version changed bad license file".

Monitor: w2207h. Nvidia GeForce 8300GS 128MB graphics card. a6437c #KJ400AA-ABA. Vista Home Prem 64 bit. [email protected] 4GB memory. New July 4, 2008. Sam's Club.
Uninstalled "My Display" (display driver), per advice this forum in '08 or '09.
Guessing this driver enables landscape/portrait display swith when monitor rotated. Don't know what else.
Thanks in advance
Dean2011
[email protected]

Hi,
Go to NVIDIA and download and install the latest NVIDIA video driver.
Go into the Control Panel ---> NVIDIA Control Panel and locate the rotate display function.
If the above solves your issue except for the message issue then I would delete out the Pivot software.
The "version changed bad license file" message sounds like this issue.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

CHANGE TO LOGO IN IP PHONE 7912, 7940 AND 7960

How can I change to logo on ip phone the next model 7912, 7940 and 7960?
thanks

those models do not provide the background options, at most you can set the idle URL
79X1 and up have that capability, 7970 also
BTW whenever you ask provide version! it's not the same windows than linux!
HTH
java
if this helps, please rate

Running v36.0.1 and Firefox is VERY SLOW, how do I speed it up or is there a New Version coming out to correct the problem?

Upgraded to v36, then v36.0.1, I still have the same problem. Running SLOW. I tryed the Refresh option and didn't work. All it did was mess up all my Settings which I had to correct. Does anyone know if there's a Newer Version coming out to correct this problem? First it was only on my Laptop, now I have the same problem on both my Laptop and my Desk Top. Please Help! Thank You for your time and assistance.

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Change Bios Logo

Is there anyway to change the logo you see at boot up?

you can switch it of in the bios, so you see the post screen
but yes it is ugly, and I dont think you can change it
unless any clever guys out there have made a mod for it?

Changing repeating logo

Hi,
I seem to be too stupid to find out how it is possible to change a logo on a layout in that way, that it is reflected on each document page immediately.
In detail: I am coming from Office handling, where it had been possible to put things into the master, to have a common look and feel. I discovered how this can be done in pages too. So far so good. But, when I have to change a "Master" in pages, means e.g. changing the company logo, how has it to be done, that it immediately affects all pages in the document.
Until now I have to change every single page. I than tried to solve via the footer, but in combination with text in the footer too, this is extremely complicated to solve - at least for me.
Any solution here or is this simply not possible
Cheers
A

Hi Peter,
many thanks for this link. This is basically as I did it, but it is anyway helpful regarding creating a template. My (nerving) problem is, that when you have done it and when you have done your document - how can you change the layout and have it reflected in the whole document at once.
In the link example you mentioned you e.g. add a logo. Fine - everytime you insert a new page in your document, you have the logo at once (as part of the layout). But what if you have finished everything and want the logo some different on the page. Than you have to change to my knowledge, every single page as this "master" functionality is not there.
Do you know what I mean?
Cheers - Armin

How to change the logo size on all the pages?

I have some 125 pages and i need to change the logo size of every page .Is there any method to change with one click that reflects on all the other pages ? Rather than i do it manually open every page and change the logo size? The logo is in the div. I want to use it as html rather than using as css div background image. Any help will be highly appreciated am using DWCS6 on win xp pro.

If the code is the same on every page, you could use the Find & Replace function within DW...
1. Make a backup of your site files, just in case
2. Make the necessary changes to one page to get what you want (make sure you know what the original code for it was/is)
3. Hit Ctrl + F to open the Find/Replace Dialogue
4. For "Find In" choose Entire Current Local Site
5. In "Search" choose Source Code
6. For "Find" put the line(s) of code that contain your background image on all pages (the original code mentioned in #2 above)
7. For "Replace" put in the newly changed line(s) of code from step 2.
8. Hit Replace All
DW will go through all of the pages, replacing whatever code you put in Find with whatever code you put in Replace.

How to handle version changes? Strategies?

We're struggling with version change issues. Most recently we tried to move from 8.5 to 8.6 and lost about a week of project time while we tried to make it run well. The problem was that the Development Environment would crash several times a day while doing block diagram edits, losing unsaved changes. We never found any clues as to why. It would be one thing to debug a VI that crashes, but when it is the LV editor itself that is crashing, how do we work on that?
Anyway, we have a policy here of freezing software updates for projects that are close to completion, because buggy updates so often delay project completions, and this triggered a return to 8.5, which is where we remain now on that project.
But now we can't install and use the VI Analyzer we just bought on any of the PCs tied to that project, as it demands 8.6. I do have one PC that is completely disconnected from this project, and it runs 8.6, so running the Analyzer there may be useful, but still messy.
How do you handle version changes? How often do you try to follow the updates? How often do you need to go back a version? Do you maintain different versions? Is it even possible to run multiple versions on an individual Win XP PC?
Thanks!

I have installed several versions of LabVIEW on my system.
Most of the toolkits are only installed in the latest versions. There are ways to install toolkits on multiple versions.
And I think that toolkits as of LabVIEW version 8.6 can be installed on several LabVIEW verions.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

I cleaned up several albums in iTunes only to have Match wipe all of my changes out. How can I alter things in iTunes and have the changes stay?

I signed up for Match but when I added new albums, they failed to appear. Ultimately I got a message to Sign Out and then Sign In to the Apple Store tab under iTunes. I then added the computer back to Match. It went through the process and uploaded the new albums (or matched them) but it also reversed hours of work I had done it editing my library and cleaning up track lists and song titles.
HOW CAN I edit/maintain my library without Match wiping every change out?????
And when will the Cover Art issue be solved???

Match was off. I made all of the changes and then went through the "Turn on iTunes Match" option. I now have deleted some tracks, edited the Metadata in CDDA, and then added it back. This worked fine, but it is not a good solution.
I just tried making some edits and use the "Update iTunes Match" and that seemed to work. It looks like the real answer is that Match must be up and operational, then you can make changes and run the Update to incorporate the changes. However, if Match has a problem then Signing Out and back in to your store account and going through the process of Turning On Match (were you get the questions, "Add this Computer to Match" will overwrite any changes.
Since this relies on the stability of iTunes, I won't be making a lot of changes between updates.

My ipod touch 4g does not show in Windows 7 or itunes. I've removed and reinstalled itunes, stopped and started apple mobile services and changed out cables. Ipod is charging when connected. I've also done a complete rollback to factory defaults.

My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes. I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.

Did you remove and reinstall all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to see if it helps determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if you have an iPod or computer problem'
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Version 9 - Changing out logos in Batch

Similar Messages

Maybe you are looking for