Version issue of base SAP DCs versus Runtime libraries

I have created a DC project of type Web Dynpro. In JDI my track is defined with the 3 base dependent DCs (SAP-JEE, SAP-JTECHS, SAP-BUILDT). I am able to sync used DCs and have locally.
When I try to build a very simple project I get the following build error "com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo cannot be resolved (or is not a valid type) for the argument stateChangeInfo of the method wdDoApplicationStateChange".
What I discovered is that the class "wdDoApplicationStateChange" does not exist in the "_webdynpro_progmodel.jar" file that was sync'd as part of the SAP-JEE DC BUT when I look at the WD runtime libraries that is part of my Studio install that class does exist in the jar file.
If I create the same application as a standalone Web Dynpro project, it builds locally successfully and when I deploy it to the Portal it runs perfectly.
Therefore it seems I need to deal with 3 versions of the same libraries:
1. The local WD runtime that comes with the Studio install.
2. The libraries that come when sync'ing used DCs (i.e. SAP-JEE, SAP-JTECHS, SAP-BUILDT).
3. The actual runtime on the portal.
Questions:
- How can we verify we have imported the correct version of the used DCs (i.e. SAP-JEE, SAP-JTECHS, SAP-BUILDT) in the JDI so the related libraries match the actual runtime?
- Is there somewhere on SDN or other SAP site a version roadmap of these SAP supplied DCs?
I tried to find documentation/references related to versioning of these SAP supplied DCs and could not find anything helpful.
Even our BASIS administrator is having trouble identifying the correct versions.

Pascal,
you mention the following:
The SP level of the three base SCs MUST match the SP level of your target runtime systems. It is also adviseable to have your NWDS at this same SP level (especially when you are building Web Dynpro's).
So can you help here...
We have modified the source code of the following version of the NW2004 ESS component: SAP_ESS 100 sp16
We would like to plan to upgrade to the following version of the NW2004s ESS component: SAP_ESS 600 sp12
The "NWDI Cookbook for XSS Customers" seems to only document the procedure and migration path on how to upgrade from one sp to the next sp WITHIN THE SAME VERSION.
(For Example: SAP_ESS 100 sp16 to SAP_ESS 100 sp19)
We need to know the migration path and process for upgrading from NW2004 to NW2004s.
(For Example: SAP_ESS 100 sp16 to SAP_ESS 600 sp12)
My hunch is we will follow a similar process, however, questions around what version of NWDS do we need to use for handling both the NW04 and NW04s component in using the Meta-Data Comparison Tool. If we need to always make sure our NWDS matchs our target J2EE Server Version, how will this work when we are working with 2 different J2EE server versions during the upgrade? (NW04 and NW04s)

Similar Messages

Swig, Subversion, and runtime libraries - oh my!

The new version of swig no longer distributes their runtime libraries (like libswigpy). Subversion needs them, at the very least.
I understand that with a lot of fiddling I can get them built, but I don't want to support it if I don't have to.
The debian people are talking about fixes for subversion and swig 1.3.22. It's the only package I can see that depends directly one swig.
It looks like gdesklets has swig as a makedepend, but I think it won't be affected.
Does anyone who uses swig have any suggestions or cautions before I go ahead with this?

Subversion needs the version of swig we have currently. The new swig breaks compatibility and subversion won't be able to use it.
The question is really for everyone else who uses swig.

Under which group i have to post issues related to SAP - Basis

Hello All,
Can some one tell me
Under which group i have to post issues related to SAP - Basis
Thanks
Balaji

Hi,
As such there is forum which is dedicated to basis. But there are number of forum where you can post issues depending upon what type of issue you have e.g.
If you have issue related to database then you can post in SAP on Oracle, SAP on DB6, SAP on MaxDB etc.
If it is related to OS then SAP on Unix, SAP on window etc.
If it is related to ERP/EHP upgrade then SAP ERP 6.0 upgrade, Enhancement Package installation.
If its related to netweaver then on SAP Netweaver administrator, SAP netweaver platform.
Thanks
Sunny

SAP NetWeaver 7.0 ABAP Trial Version Issues - cannot start NSP from MMC.

I am trying to install the the SAP NetWeaver 7.0 ABAP Trial Version on Windows XP Professional. The installation ended without errors but now I can not start the NSP instance from MMC. The message server and dispatcher processes both start but message server stop after a few seconds. The dispatcher also stops after sometime. Appreciate any inputs on this. Thanks a lot.................

I was getting similar kind of issue while installing SAP ABAP trail version. After going through documents I found if there will be any SAP installation on that system earlier it will not install SAP ABAP. I format my system, install ABAP server, Install SAP GUI in order. Now it is working fine.
If you do not want to format your system then remove all entry from registry or use virtual PC. I prefer ro use Virtual PC.
Thanks,
Prakash

Issue with starting SAP

Hi
I have installed SAp r/3 4.7..using loopback adapter in windows xp sp2 and .everything wenet fine and i could start SAP and checked.
Now I installed my sound card and alos ethernet adapter for my internet connection and also installed antivirus and firewall. In the mean time I created a password for the administrator account which i left blank during installation of xp and later SAP. Now in services the two sap services are not started and when i tried to start these services it gave me erro like "cannot start due to log-on change " or sometyhing like this.
Anyhow I changed the log on type to local system from the default user name it took and was able to run the service now. But when I am opening the MMC and starting the basis here the disp is starting for short time and then again getting disabled.
After that when i try to log in from launch pad it is giving error.
Can some one please help me????/
Following are the ssreen shots of my issue:
1. Dispatcher is running:
http://www.divshare.com/download/232417-604
2. Disp stopped
http://www.divshare.com/download/232418-7ae
3. Error while logging from SAP launch pad
http://www.divshare.com/download/232419-edc
Message was edited by:
        Ajay Kumar Meher

trc file: "dev_disp", trc level: 1, release: "620"
Mon Jan 03 10:40:41 2005
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    251
intno      20020600
pid        4068
***LOG Q00=> DpSapEnvInit, DPStart (30 4068) [dpxxdisp.c   966]
     shared lib "dw_xml.dll" version 252 successfully loaded
     shared lib "dw_xtc.dll" version 252 successfully loaded
     shared lib "dw_stl.dll" version 252 successfully loaded
Mon Jan 03 10:40:46 2005
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3140]
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 536 MB
<ES> 535 blocks reserved for free list.
ES initialized.
Mon Jan 03 10:40:48 2005
***LOG Q0K=> DpMsAttach, mscon ( basis) [dpxxdisp.c   8832]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Mon Jan 03 10:41:28 2005
ERROR => W0 (pid 3820) died [dpxxdisp.c   11210]
ERROR => W1 (pid 3812) died [dpxxdisp.c   11210]
ERROR => W2 (pid 3804) died [dpxxdisp.c   11210]
ERROR => W3 (pid 1388) died [dpxxdisp.c   11210]
ERROR => W4 (pid 660) died [dpxxdisp.c   11210]
ERROR => W5 (pid 2664) died [dpxxdisp.c   11210]
ERROR => W6 (pid 3784) died [dpxxdisp.c   11210]
ERROR => W7 (pid 3776) died [dpxxdisp.c   11210]
ERROR => W8 (pid 752) died [dpxxdisp.c   11210]
ERROR => W9 (pid 3764) died [dpxxdisp.c   11210]
ERROR => W10 (pid 3760) died [dpxxdisp.c   11210]
ERROR => W11 (pid 3752) died [dpxxdisp.c   11210]
ERROR => W12 (pid 3748) died [dpxxdisp.c   11210]
ERROR => W13 (pid 1556) died [dpxxdisp.c   11210]
ERROR => W14 (pid 1384) died [dpxxdisp.c   11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c   503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c   13129]
Mon Jan 03 10:41:30 2005
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9058]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 4068) [dpxxdisp.c   7637]
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Mon Jan 03 10:40:49 2005
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SEN\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SEN\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SEN\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid   560 (PC with Windows NT)
M relno      6200
M patchlevel 0
M patchno    251
M intno      20020600
M pid        3820
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3820) [dpxxdisp.c   1016]
I
I Mon Jan 03 10:40:50 2005
I MtxInit: -2 0 0
X
X Mon Jan 03 10:40:53 2005
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X
X Mon Jan 03 10:40:54 2005
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Mon Jan 03 10:40:56 2005
M calling db_connect ...
C Got ORACLE_HOME=D:\oracle\ora81 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSEN's password
C Connecting as /@SEN on connection 0 ...
C Attaching to DB Server SEN (con_hdl=0,svchp=06538D08,svrhp=06538B14)
C
C Mon Jan 03 10:40:59 2005
C Starting user session (con_hdl=0,svchp=06538D08,srvhp=06538B14,usrhp=0657A71C)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c      3718]
C *** ERROR => CONNECT failed with sql error '1034'
[dboci.c      9536]
C Try to connect with default password
C Connecting as SAPSEN/<pwd>@SEN on connection 0 ...
C Starting user session (con_hdl=0,svchp=06538D08,srvhp=06538B14,usrhp=0657A71C)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
[dboci.c      3718]
C *** ERROR => CONNECT failed with sql error '1034'
[dboci.c      9536]
B ***LOG BV3=> severe db error 1034      ; work process is stopped [dbsh#2 @ 957] [dbsh    0957 ]
B ***LOG BY2=> sql error 1034   performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1098]
M
M Mon Jan 03 10:41:00 2005
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   8277]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = -1
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    rfc_req = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server basis_SEN_30 on host basis (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Mon Jan 03 10:41:00 2005
M * RELEASE     620
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        8408
M * COUNTER     1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3820) [dpnttool.c   345]
trc file: "dev_rd", trc level: 1, release: "620"
Mon Jan 03 10:40:48 2005
***LOG S00=> GwInitReader, gateway started ( 3828) [gwxxrd.c     1556]
relno      6200
patchlevel 0
patchno    125
intno      20020600
pid        3828
Bind service sapgw30 to datagramm port 3330
Bind service sapgw30 (normal) to port 3330
GwPrintMyHostAddr: my host addresses are :
1 : [192.168.1.1] basis (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
MtxInit: -2 0 0
Mon Jan 03 10:41:29 2005
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c     12391]
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 1828] Mon Jan 03 10:40:38 2005
[Thr 1828] MsSSetTrcLog: trc logging not active
[Thr 1828] relno      6200
[Thr 1828] patchlevel 0
[Thr 1828] patchno    125
[Thr 1828] intno      20020600
[Thr 1828] pid        3180
[Thr 1828] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3180) [msxxserv.c   1515]
[Thr 1828] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 1828] *** I listen to port sapmsSEN (3630) ***
[Thr 1828] *** HTTP LISTEN ***
[Thr 1828] *** I listen to HTTP port 8130 ***
[Thr 1828] CUSTOMER KEY: >P1591255980<
[Thr 1828] Mon Jan 03 10:41:30 2005
[Thr 1828] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from basis_SEN_30 [msxxserv.c   3957]
[Thr 4072] Mon Jan 03 10:41:44 2005
[Thr 4072] MsSExit: received SIGINT (2)
[Thr 4072] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3180) [msxxserv.c   4786]

Sap Sybase ASE runtime edition

Hi All,
I would like to know what is "sap sybase ase runtime edition" and what are the advantages and disadvantages of this database edition. Is this a complete Sybase database?

Hello Nick,
Thank you for posting your inquiry based upon the support incident you had opened.
>>
I'm asking if with an upgrade of software(ASE) can the license for SYSAM be refreshed or do it have to be checked in and re-created. There was a check box on the old Sybase system to refresh a license for an upgrade of software I would like to know if that still exists.
<<
The license generation tool (interface) on SAP's Support Portal (ServiceMarketPlace) is very similar to the previous Sybase Product Download Center.
If a license file needs to be updated (refreshed), you can do this using the 'Upgrade' button.
Otherwise, check-in, then generate new one can resolve the issue.
Keys | SAP Support Portal
>> Request Key from Install
>> enter/select desired Installation Number
>> select Sybase Entitlement Overview (View, Check-in, Update previously generated SySAM 2.0 licenses)
>> find your license and then select the 'Upgrade' button.
>> download license.
side note: a related subject 'date-based versioning' in SySAM guide
Working with Date-Based Versioning
-Michael

Issue with changing database location at runtime

I am having a similar issue to:
Re: Issue with changing database location at runtime
where I am using Crystal Reports 2008 SP 3 fix pack 3.3 and a OLE DB connection to a SQL 2008 R2 server. Running on a computer on the network where the report can see the original development server is fast, other computers where that server is not available are hanging 20 seconds before coming up.
I am using the same code from the Crystal Sample app to change the connection on each table. I found that the slowness comes the first time the ReportDocument object is accessed to get the collection of database tables, before the connection info is set.
Fix pack 3.4 was mentioned in that post. Does fix pack 3.4 fix that issue? I don't see fix pack 3.4 on the downloads page (https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm)

I just found on the reports that were having the issue there was a SQL Expression. Per this thread:
Re: Report load is slow after changing database servers
There was an issue with that and the fix is not out til the end of Feb so I found a way not to use the SQL Expression and the speed is much better.
However, your information provided led me to this post:
Cannot Change Table Location, but Only for One Report
And I am also experiencing an issue where the table location is not changing on one subreport and I will look into that as a possible solution.
Thanks so much for your help.

I would like to know the version or name of SAP that is implemented in real

I would like to know the version or name of SAP that is implemented in real time?

This is a very generic question and really depends on what you are implementing (modules).
The history of the "R/3" is
3.0D Basis 300
3.0E Basis 300
3.0F Basis 300
3.1H Basis 310
3.1I Basis 310
4.0B Basis 400
4.5B Basis 450
4.6C Basis 460
4.71 Basis 6.20
4.72 Basis 6.20
5.00 Basis 6.40 (ECC 5.0 - Enterprise Core components)
6.00 Basis 7.00 (ECC 6.0) - actually in RampUp
All of those have increased business functionality and interfaces to other systems (CRM, BW etc.)

Is there any book for troubleshooting issues for basis consultants for beginners.

is there any book for troubleshooting issues for basis consultants for beginners.

Have you tried taking a look at the books at SAP press?
Administration - Books by SAP PRESS
https://www.sap-press.com/it-management/sap-for-beginners/topic/

Qmaster not using all computers in cluster, is it a version issue?

hi i'm new to cluster compressing. I just set up a cluster and a compressor batch. the batch is running fine, however it's only using two of the three computers in the cluster. I rechecked the qmaster settings on the offedning computer and they are correct. It shows up on the qadminstrator of the controlling computer as well, but always remains idle. the computer that it's not using is an older version of compressor (and presumably qmaster). is it a version issue I'm experiencing? I'd love to get this 3rd computer working on the cluster as is has the fastest processor of the bunch.

Hi Gordon,
Thanks for your response. Actually I have already asked my work buddies not to use manager for a while so I can address the problem.
BTW, I also want to know if there is a way to monitor that kind of session in SAP. I will post it in another thread.
Thanks,
Lan

Adobe Version Issue

Hi,
I am trying to use the following blog so that I can send a mail.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417400)ID1415835150DB20085339665800400921End?blog=/pub/wlg/6676
I believe there is some restriction on ADOBE VERSION. I am not able to ascertain it.
PLease let me know is there any problem with Adobe Reader version. I am currently using Reader 8.1.5.
Regards,
Aditya Deshpande

Hi Otto,
I have implemented the same code.
When i use ADobe Acorobat 9 pro, it works there.
When I use adobe reader 8.0 or reader 8.13 or 8.1.5.
It does not work.
I have SAP FORMS as my plug ins i.e ACF.
Hence it should be reader version issue.
Since acrobat is costlier version I wanted to be sure whether or not it can used any version below.
Regards,
Aditya Deshpande
Edited by: Aditya Deshpande on Dec 9, 2009 9:59 AM

Version issues/compatability

Hello, we have 2 guys using version 11.5 CR Developer, we have been using for years and not had any issues. We have 2 other guys now on the latest version of SAP CR Developer version 14.0.4.738.
Problem
When we run the reports using the newer version it returns lower figures that the older version which are correct, I have tried changing this and that including saved data and 2 separate reports for each version with the exact same setup but still the newer version are much lower than the other versions. It simply does not make sense unless the newer version is reading differently to the other version. One other thing is when I read using any viewer I get the correct data returned, so this is the SAP 14.0.4 version issue.
Can anyone advise on this one?
Thanks
S

Hi Steve,
This could an issue with the DB Client you are using, lots of changes to both CR and the DB clients between then and now.
What database are you using and how are you connecting and which DB Clients are you using?
The syntax of the SQL, case sensitivity, Null value handling are 2 I think of off the top...
Don

Key functional differences between SAP ECC Version 6.0 and SAP Version 4.6

Hi Forum,
As we are currently updgqrading to SAP ECC Version 6.0 from SAP Version 4.6, could someone please identify what are the new functionalities are being offred in SAP ECC 6.0.
Please let me know or guide me in a right direction - my email address is [email protected] or simply reply to the forum.
Thank you
Yogesh

Dear Yogesh,
Please go through Upgrade info @ service.sap.com.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack.
4.6C supports NONUNICODE.
Hope this would add some more info.
Regards,
Naveen.

How to create a JAX-WS dispatch client on top of the SAP JAX-WS runtime?

Hello,
We have created an ear file that calls a web service using the Metro toolkit. This code is throwing an exception when attempting to create a client to connect to the calculation service. The exception is coming out of the core JAX-WS classes that are part of NetWeaver. (see exception below)
Caused by: java.lang.NullPointerException
     at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatchContextExistingPort(SAPServiceDelegate.java:440)
     at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatchContext(SAPServiceDelegate.java:475)
     at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatch(SAPServiceDelegate.java:492)
     at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.createDispatch(SAPServiceDelegate.java:484)
     at javax.xml.ws.Service.createDispatch(Service.java:166)
We have done some research and it appears that as of NetWeaver 7.1 SP3 SAP stopped using the SUN JAX-WS runtime and implemented their own SAP JAX-WS runtime.
Included below is the code we use to create a client below. It works fine on all the platforms we support with the exception of NetWeaver 7.1 SP3 and higher (already checked SP5 as well)
      //Create URL for service WSDL
      URL serviceURL = new URL(null, tpsWSEndpointWSDL);
      //create service qname
      QName serviceQName = new QName(targetNamespace, "CalculateTaxWSService");
      //create port qname
      QName portQName = new QName(targetNamespace, "CalculateTax");
      //create service
      Service service = Service.create(serviceURL, serviceQName);
      //create dispatch on port
      serviceDispatch = service.createDispatch(portQName, Source.class, Service.Mode.PAYLOAD);
      //invoke dispatch with Source based request
      Source result = serviceDispatch.invoke(new StreamSource(documentToInputStream(request)));
Does anyone know what we need to change in order to create a JAX-WS dispatch client on top of the SAP JAX-WS runtime?
Thanksu2026
-Chris

Not that I have a definitive answer, but why should it matter? The web service should be developed independent of TLS. If you are trying to use SSL with then the web service is oblivious to it. If you are trying to use WS security thats a whole other ballgame.

App won't install with the prerequisite SAP Crystal Reports Runtime Engine

On installing with the following prerequisite checked:
SAP Crystal Reports Runtime Engine for .NET Framework 4.0
.. received this error:
Crystal Reports for .NET Framework 4.0\CRRuntime_32bit_13_0.msi
has changed since it was initially published.
Should I NOT use the prerequisite, and instead, use a merge module?

I ran a program with the exact same name, 2 weeks ago, on my VS 2010 Dev machine:
CRforVS_13_0.exe. (284 Meg)
Today, I followed your link, and downloaded the file with the same name, but different size: (1.5 Meg). I mean, a really major difference in size!
Because creating and testing installation packages is very time consuming, I want to verify what you have stated so that I completely understand before I change what currently works, which is for the client machine to separately install the CR runtime, to what you're proposing in including a prerequisite to my install package.
-> I should run this latest exe. It will add a prerequisite to the prerequisite list in Visual Studio 2010. The installation of this prerequisite will work, as the earlier one did not. And it will work for both 32- and 64-bit client machines.
Therefore, I can eliminate the need for the client machine to install the CR run time separately.
Please confirm, and then I will make the necessary changes, and do the install tests on client machines.
(Also, FYI the merge module did not work for me on a 32-bit client machine. So I removed it.)
Thanks, Peg

Version issue of base SAP DCs versus Runtime libraries

Similar Messages

Maybe you are looking for