Version management in SD

Hi all,
There is a particular requirement in our project. The requirement is as follows:
The company issues Debit Memo Request (DMR) after completion of a job. Now if there is a dispute with the customer and it is mutually agreed, then a new DMR would be raised. Now our client wants to keep track of all the DMRs raised with version.
If we delete the DMR then it will not be shown in the document flow. I found that I can reject all the line items and close the earlier DMR – but the process becomes cumbersome.
Is there a work around for this process?

Hi Koustav
  I think transaction VA05 would help you.
  Here you can find all the debit memo requests related to a particular customer.From here you can transfer all the required dbr to excel sheet.
  Make a BDC program for these DBR'S where you can reject line items for one of youe debit memo request and record this using SHDB.
  Rest of your DBR'S would be taken from your excel sheet and the process would be easy.
  Youi can take a help from ABAP programmer.
   Reward if the idea helps you.
Regards
Karan

Similar Messages

  • Version management issue

    I am two issues with Version Management in PR and POs:
    - New version can only be added onces the PR or PO is release by final authority. Below is the scenario:
    I have created a PR and have it release by the two approving authorities. Now I want make changes in the PR. I have it cancelled from the both approving authorities and make the required changes. Now logically the system should allow the initiator to add the new version so that requisition so that the approving authrities must know that the second version of requisition is being released. But the system doez not let the initiator add the version prior to release. Do we have any solution to this?
    - second issue is that once the second version is added in the PR and we need to make some more changes and create a thrid version, system doznot let user to revoke the release.

    Dear ABC,
    For your issue 1, please check if version already set to completed and an message output already sent to vendor.
    This is the prerequisites for the new version to be created. A new version will only be created when the information
    had sent to vendor.
    Regards,
    ian, Wong Loke Foong

  • Issue in PO Version Management

    We have recently configured release strategy for PO in SAP.
    Now there is issue with Version management.
    Consider X and Y are users responsible for Purchasing activities.
    Scenario prior to Release Strategy Configuration:
    If X has created PO and if it is transferred to Y for some changes, Y used to manually genrate version(Using + button on Version Tab in PO) and used to make changes in PO. i.e. X and Y both were able to genrate version.
    Scenario after Release Strategy Configuration:
    If X has created PO and if it is transferred to Y for some changes, Y is not able to genrate version as + button on version tab is deactivated  but able to make changes in PO. i.e. X  is able to genrate version.
    Client wants it as per earlier scenario. i.e. Both X and Y shud be able o generate version manually.
    Is thare any authorization issue? or it got affetcted because of Release strategy cinfiguaration.....? How to resolve this?

    Hi
    New Versions of Purchasing Documents
    The system always creates a new version when the purchasing document has reached a final state. This means one of the following processing states:
    Active
    If you do not use the document release functionality
    Release completed
    If you use the document release functionality
    For a new version of a purchasing document to be created, all messages must have also been transmitted.
    No new versions are generated for purchase orders that are on hold or not fully released.
    Hope it helps
    Regards
    Prasanna R

  • Can JWS be used as a multiple Java version management tool?

    WinNT4 WKS with JRE 1.3.1 - 1.4.2 loaded on it using IExplorer or Netscape.
    We don't have a need for the JWS download features because our clients (and their applications) remain static for the most part. However, we do require multiple JRE version support because our customers have written class/objet "fixes" (mostly for text rendering) and these fixes break if you try and run the application on a different version of Java from which it was written. Basically, we can't have a default JRE on each machine and hope that it will work with all customer applications. So we will load all necessary Java components on our workstations (in this case JRE versions 1.3.1 - 1.4.2). I know that browsers can be forced to load with a specific Plug-in version (providing it exists on the machine) through Object & Embed tags in the HTML and that standalone apps can be directed to the correct Java directory path. My question is, can JWS automatically identify the Java requirements of our customers applications and act simply as a multi-version management tool to provide the right JRE/Plug-In for either standalone or browser applications? Keeping in mind that all the JREs will be loaded on the workstions and it won't need to download any components from some site.
    I've noticed that JWS identifies all JREs loaded on a machine in the Java tab so I'm wondering if it can "switch" the environment as needed for each application.
    Does anyone know if I can use JWS in the scenario I described above? Thanks!

    JWS can manage the multiple JREs installed if you run the application through a .jnlp. This can not "switch" the default JRE. It runs the application specified in the .jnlp using the requested version specified in the .jnlp.
    JWS does not apply to applets. You should use the object tags as you mentioned below.
    ...can JWS automatically identify the Java requirements of our customers applications
    No. You must determine this and setup the .jnlp appropriately.

  • Version Management with Analysis workbooks? Doesn't save workbooks in BW Netweaver platform or BO Platform

    SAP BusinessObjects Analysis, Edition for Microsoft Office -     1.4 SP6
    SAP BusinessObjects BI Platform - 4.1 SP2
    BW 7.3
    SAP Logon pad - 7300.1.0.1074
    We are trying to implement What-if analysis in Analysis Office tool like Revenue increase by N percentages. Excel formula applied for this in the adjacent column to keyfigures that is coming from BEx Query.
    Here, I need to save the Workbooks in versions as V1, V2, V3, etc., for various percentages.
    When I try to save this in BO platform, only the version V1 (first copy) is getting saved. But, the modified workbook is not getting saved with different name as V2 or V3, etc.,
    When I try to save this Netweaver platform, even the first copy V1 is not getting saved. But it displays different versions in the save window before closing the Analysis Office application.
    Please provide information on VERSION MANAGEMENT with Analysis Office.
    Note: I see a difference in 'Open' and 'Save' window that is Roles are not visible in the 'Open Workbook' window but Roles are  visible in 'Save Workbook' window.
    Thanks,
    Jeni.

    SAP BusinessObjects Analysis, Edition for Microsoft Office -     1.4 SP6
    SAP BusinessObjects BI Platform - 4.1 SP2
    BW 7.3
    SAP Logon pad - 7300.1.0.1074
    We are trying to implement What-if analysis in Analysis Office tool like Revenue increase by N percentages. Excel formula applied for this in the adjacent column to keyfigures that is coming from BEx Query.
    Here, I need to save the Workbooks in versions as V1, V2, V3, etc., for various percentages.
    When I try to save this in BO platform, only the version V1 (first copy) is getting saved. But, the modified workbook is not getting saved with different name as V2 or V3, etc.,
    When I try to save this Netweaver platform, even the first copy V1 is not getting saved. But it displays different versions in the save window before closing the Analysis Office application.
    Please provide information on VERSION MANAGEMENT with Analysis Office.
    Note: I see a difference in 'Open' and 'Save' window that is Roles are not visible in the 'Open Workbook' window but Roles are  visible in 'Save Workbook' window.
    Thanks,
    Jeni.

  • Version Management

    Dear Sirs,
    We have activated version management for purchase orders. 
    Purchase Orders are made in the system and printout of the same are being taken from the print preview screen before the release of the PO.
    If some changes are made in the PO after the release of the PO, the sytem does not activate the version management.  Reason: no messages were issued after the release of PO. 
    Is it possible that when a print out is taken, the system automatically processes the output message, whether the PO is released or not.
    Viral Bhinde

    Hi Viral,
    I got ur problem.
    As you said when you make changes to PO system set new release strategy as well as new version. It is expected that whenever there are changes in PO it should be communicatted to Vendor thru PO print.
    In your case ur PO created new version as well as new release strategy. And you tried to take print before PO release. Please first release the PO and take print thru ME9F. That message will disappear.
    Plz let us know if there is further problem.
    Thanks
    Nilesh

  • Problem in Purchase order version management

    Dear Guru,
    My Friend i have some problem in version management in Purchase order, when my user changed PO new version created, then user fill the data like reason, text, requested by but he forget about the tick mark on completed field so that PO not require new release.
    can u suggest how i can mandetory this completed field
    Regards
    Kashyap Kumar

    Hello,
    In version management..the tick is mandatory.... and remaining fields are not manadatory.......
    Mahesh

  • Version management for Purchase order

    Dear Friends,
    I am implimenting version management for Purchase orders.
    Under version management(IMG) ,set up change dispalys node--
    following fields are available.
    Ex:
    Doc type-- ZCO,NB
    For item view fields:
    Field nameEMATN(material),TableMEPO1211--material field in Item over view
    Field nameMENGE(Quantity),TableMEPO1211
    For Header level fields:
    Field nameZTERM(payment terms field),,TableMEPO1226
    Category--A or B for selection of change documents
    No out put--if i tick it concern field will not included in change doc
    Version--what is the purpose
    Please suggest me
    1) we need enter the all the field names in the item over view and item details and Header level fields as given above ,is it correct.
    2) And with regard to Table, do i enter for Header level fields-EKKO or  MEPO1226 which is available in F1 under techinical information,
    for item level fields,shall i enter table name-EKPO or MEPO1211as dispalyed in the F1 under techinical information.
    3) I need to enter all the fields existing in the purchase order
    4) All these fields and data is to be entered for every document type NB and ZCO.
    5) After changes are made in Purchase order,first time on saving the PO,version is creating automatically,
    second time,if we do changes, version is not creating on saving the purchase order,what configuration needs to be done.
    Please suggest.
    Regards,
    Magana

    Also tell me the use of *Display of change documents in PO*.
    It will display changes made both in item & header.It will help you to audit all changes made in p.o after it is raised.
    In version management not all changes can be ameneded as seperate versions
    only critical changes like price revision,quantity revision.

  • Purchase order version management

    Dear All.
                 I have configured the purchase order version management.
    but at the time of change ppurchase order i have changed the text field for that also new version is triggered. i want to control this if only qty and price and payment terms change only version management should trigger. is it possible through standard please tell me the config steps.
    Regards
    Kumar.

    Data output category
        Indicates the data output category to which the relevant field belongs.
    Use
        You can assign a character to related fields. You can then use this
        character to select the fields in the application.
        Note
        SAP recommends you use only the folloiwng characters: a-z, A-Z, 0-9.
    Example
        You wish to obtain a quick and straightforward overview of changes
        involving the material, order quantity, and price. This information is
        particularly important to you. You therefore assign the character A to
        these fields.
    Indicator: no output
        Indicates whether the field is included in the display of changes.
    Use
        If this indicator is selected, the corresponding field is not included
        in the display of change documents.
    Example
        You have selected the indicator for the Requester field. The content of
        this field is then changed in the purchase requisition.
        Result
        The changed field is not included among the changes that are displayed.
    Indicator: No output in case of versions and buyer approval
        Specifies whether or not the field is to be included in the display of
        changes for a version.
    Use
        If this indicator is selected, the relevant field will not be included
        in the display of changes that you can invoke via @II@ on the Versions
        tab page.

  • Version managment in purchase order's

    Hi,
    I am working on version management. I have configured it in the system but i have problem which is as below:-
    Suppose i create a PO the system gives it version 0.Now i do various other changes and say create 2 more versions say ver 1 and ver 2.Now if i want to take the print of the original PO i.e ver 0 it still gives the print as in ver 2 which has all the changes instead of the original PO.Can u please explain why this is happening and the solutions.
    regards,
    Akshay

    HI GUYS,
    here's the scene in detail.
    I make a PO with 1 item and qty 10,now when i save this version 0 is created.
    Now i make changes in the PO say change the qty from 10 to 20, now version 1 is created. Now if i have to to the print of version 0, the print contains the changes which were made in version 1 i.e qty 20 instead of actual 10.
    Does this mean that once a version is created the print of older version can't be taken without the changes that were made in the new version??

  • How to add Target System to Remote Comparison in Version Management

    Hello,
    We have defined an RFC connection from System A to system B. We want to use system B for remote comparison or programs from system A. However, when we choose (from SE38):
    Utilities -> Version Management -> REMOTE Comparison -> Target System
    system B does not appear in the list.
    How can we add system B to this list?
    Thanks and Regards.
    Reena

    go to the object which u want to compare
    go to->version management->select the TR request no->and select remote comparision there->and give the system where u need to compare this object
    and next press compare
    hope it will work
    cheer
    s.janagar

  • Version management in RFQ not working

    i have configured the version management for RFQ. When i create a RFQ, version 0 is not completed. even though i can maintain quotation and as well as create a Purchase order. system does not throw any message that purchasing document version is in process as we have in PO. Kindly guide me.
    Johi Kapoor

    No i dont want version 0 to be automatically ticked as completed. client want to manuals tick the version. client requirement is verion 0 is not ok, why the system is allowing to maintain that quotation or allowing to create a po with reference to that rfq.
    need any settings for this.
    Edited by: Johi Kapoor on May 19, 2011 6:21 AM

  • Request not visible in the version management of a Report Program

    Hi,
    We Imported an external request into the SAP System.
    The request was imported successfully and a program already existing is updated with that request,
    The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that  particular program
    We tried reimporting the request but the request is not visible.
    Regards

    Check the transport logs and see if there are any erros/warnings.

  • PO version management - view history version

    Hi expert,
    I'm using PO version management together with change PO output.
    1. Is there a way to pre-view or re-print a certain history version of the PO output? currently only the last version can be previewed and I got error message when I try to reprint hisotory version (no printed relevant changes).
    2. When I change the PO, a new version is not created until I save the PO. I have to come to the change mode again to mark it "complete". Is there a way to have the new version available before save, so I can make my changes and mark it completed right way.
    3. Is there a standard SAP report shows incompleted PO versions? I need to run it to remind me of the PO's that I still need to work on or to mark completed.
    Thanks a lot for your kind help!
    Regards,
    Jully

    Hi Jully,
    You can try the following link :
    http://www.sap-img.com/mm001.htm
    It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
    Take the help of your ABAP consultant to run for you.
    See if it helps.
    Best regards
    Amit Bakshi

  • Version Management for PO Fields

    Hi,
    Curently System is capturing the Version
    Management for PO with Fields, Incoterms, Total Net Order Value, Value Changes, Currency, Deletion indicator in purchasing document & Purchase order quantity.
    But the Requirement is to capture(display) only the Incoterms, Deletion indicator in purchasing document & Purchase order quantity.
    How to filter the other PO Fields in Version Management-  Total Net Order Value, Value Changes & Currency.

    Thank for ur smart reply...
    Here the Requirement is in Purchase Order to capture(display) only the Incoterms, Deletion indicator in purchasing document & Purchase order quantity.
    And to filter the other PO Fields in Version Management- Total Net Order Value, Value Changes & Currency.
    But you had given the suggestion for PR. psl guide me how to do this process for PO process.

  • Version Management for SPRO

    Hi,
    How do i check for the version of SPRo. A change has been made in the nodes. I want to check for the history of changes made to spro settings.
    How do i go about it ?

    Hi,
    No this is not my question .
    I goto transaction SIMGH. Select my IMG structure and enter which displays all the nodes attached, Now a user has made changes and a few nodes are missing . Any changes in IMG will be done only to a transport requst.
    I want to check what changes hve been made to the nodes.
    e.g when we want to check changes for a ABAP prog. we goto the version management and check changes made and which transport request is it in.
    can such a check be done for IMG changes . This is my question. Hope i am clearer this time .

Maybe you are looking for