How to add Target System to Remote Comparison in Version Management
Hello,
We have defined an RFC connection from System A to system B. We want to use system B for remote comparison or programs from system A. However, when we choose (from SE38):
Utilities -> Version Management -> REMOTE Comparison -> Target System
system B does not appear in the list.
How can we add system B to this list?
Thanks and Regards.
Reena
go to the object which u want to compare
go to->version management->select the TR request no->and select remote comparision there->and give the system where u need to compare this object
and next press compare
hope it will work
cheer
s.janagar
Similar Messages
-
hi frnds,
i need ur suggestions, we have created the transports and we didnt specified the target system becoz there was no connectivity at that time. now we have connectivity to the target, how can can we add the target to the transport requests which was created by us??????go to the object which u want to compare
go to->version management->select the TR request no->and select remote comparision there->and give the system where u need to compare this object
and next press compare
hope it will work
cheer
s.janagar -
How to add target to jmsSystemResource MBean using JMX
Does anybody know how to add target to jmsSystemResource MBean using JMX in WebLogic 9.0?(I am not using WSLT) I always get "NoSuchMethodException":
[jmsServer] Caused by: java.lang.NoSuchMethodException: addTarget(weblogic.management.configuration.
TargetMBean,) for com.bea:Name=admin01DefaultJMSServer,Type=JMSSystemResourcego to the object which u want to compare
go to->version management->select the TR request no->and select remote comparision there->and give the system where u need to compare this object
and next press compare
hope it will work
cheer
s.janagar -
How to add buisness system in Integration directory -objects
Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu. -
How to add a system into Solution Manager directory.
Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip BhattacharyyaHi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher -
How to add these system in the system ID list?
Hello:
Now I have a another problem in Setting Up Central Auto-Reaction Methods.I have created in solution manager, In the system ID list,I want to have development system ,production system,and other system,because I want to alert these system,but I don't know how to add these system in the system ID list?Dose it need RFC?
Please someone tell me.
lexian
Thanks a lot!Lexian,
You need to some of these things for the SAP systems to show up in Solution Manager
1. Install the Monitoring Agents (SAPCCM4X for ABAP instance and SAPCCMSR for J2EE instance etc)
2. Configure RFCs from Solution Manager to the Satellite (SAP) systems.
3. Create CSMREG user.
4. Create Monitoring jobs.
These are just some of the things that you will have to do. Refer this link on how to do this
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm.
This is for the broader view of the entire thing
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
I would suggest starting with the second link.
Let us know if you have any questions
Kunal -
How to add coordinate system SVY21(SRID: 3414) to Oracle Spatial 11g/12c
Can any one please help me for "How to add coordinate system SVY21(SRID: 3414, for Singapore) to Oracle Spatial 11g/12c'?
Why don't you start with the documentation: Coordinate Systems (Spatial Reference Systems)
Especially paragraph 6.9 (6.9 Creating a User-Defined Coordinate Reference System ) should be helpful for you.
HTH,
Stefan -
How to add an issue if you are a responsible manager of a child wbs ?
How to add an issue if you are a responsible manager of a child wbs ? I have some projects with lots of child WBS and these child WBS is managed by others project managers (or others responsible managers), different responsible manager from the project. I'd like the others responsible managers could add/edit/delete issues in their WBS's. How to do that ?
Hi Yves
try to type at the end of your query the following
select cardcode,cardname,balance from ocrd
for browse
and execute it again
Edited by: Fasolis Vasilios on Nov 30, 2011 12:10 PM -
I am trying to add the rac targets using emcli interface. Before adding rac_database as target type we need to add a cluster. I Used the following command to add a cluster but it fails with internal error. and the log files do not show any error.
Any idea how to fix this?
./emcli add_target -name="bacalbdb01n_cluster" -type="cluster" -host="bacalbdb01n1" -monitor_mode="1" -properties="OracleHome:/u01/crs/oracle/product/11/app;scanName:bacalbdb01n-scan;scanPort:1521" -instances="bacalbdb01n1:host;bacalbdb01n2:host"
Internal Error: The EM CLI system has encountered an internal error. Details have been added to the EM CLI log files.Looks like it might be bug 15982024 where the target is already part of a cluster. Can you check your unpromoted targets (Setup -> Add Target -> Auto Discovery Results -> tab Agent Based Targets) and see if a cluster on either of those hosts is already discovered but not yet promoted. If so, you can try to delete that discovered cluster, and retry the cmd.
Log File Locations
The following examples show possible log file locations:
Example 2-3 No Configuration Directory Specified with Setup Verb (default location)
user.home/.emcli/.emcli.log user.home/.emcli/.emcli.log.1
If you do not specify a configuration directory when you run the setup verb (-dir option is omitted), EM CLI assumes the .emcli configuration directory is located within your local home directory. The log files are placed at the root level of the .emcli directory. The .emcli directory must be local (not mounted remotely). -
How to parameter Target System in eCATT
Dear all,
I would like to know if it is possible to have the Target System in the eCATT editor to parameterize them like the interfaces? In fact from solution manager I have to run a business scenario in diffrent satellite systems with RFC connections.
TCD (<transaction code>, <command interface> , TARGET_A).
TCD (<transaction code>, <command interface> , TARGET_B).
TCD (<transaction code>, <command interface> , TARGET_C).
etc.
Kind regards,
AkliluHello Aklilu,
as all people aggree, parametrizing is no option.
But it is even not needed to support your case.
What one should do is:
Use always the same eCATT target system (e.g.TARGET_A)for operations in one certain remote system (say A). Use another eCATT target system (e.g.TARGET_B) for another remote system (say B).
All these commands together can be part of one script or a couple of scripts and modules automating one business case, like in your sample. The target systems are defined in a systemdata container, e.g. SYS_DEV.
If that business case should be executed in another landscape, copy the system data container (e.g. to SYS_PROD), exchange the RFC destinations inside the copy and execute the script with that new system data container.
You even can create multiple testconfigurations refering to the script and assign the different system data container to each. Such you can avoid to type the different system data names again and again on eCATTs start screen.
In that sense eCATT Target Systems are already variables/parameters.
A last hint:
If you have multiple occurrence of a series of transactions in the same remote system, it is not needed to write the target system at each eCATT command. Simply aggregate the commands belonging together in one script and call that script from another one using REF with the target system.
Define TESTSCRIPT SOMETHING.
SAPGUI ( cmdi_ta_1 ).
SAPGUI ( cmdi_ta_2 ).
SAPGUI ( cmdi_ta_3 ).
In another script:
REF( SOMETHING, CMDI, TARGET_A ).
Works also with TCD, FUN, WEBDYNPRO, ....
Best regards
Jens -
How to add business systems into DIRECTORY?
Hi,
I have problem to add business system into Business Systems list in my scenarion in the Integration Directory. These systems are already in the SLD, but when I try to assign a business system, I have only choice to assign XI...
How to solve this problem?
Thanx 4 answers!
Peterhi Peter,
maybe your business systems are already inside ID?
BTW
did you assign you business system to a correct
integration server? (when definig the business system)
also remember to refresh SLD data cache from ID
- environment
- clear SLD data cache
Regards,
michal
Message was edited by: Michal Krawczyk -
How to add new system call in solaris ?
Hi,
I want to add new system call in solaris. please inform me steps for adding new system call in solaris.
Thanks in advance,
Mahantesh.Here's a Solaris 7 example I know there are others ...
http://access1.sun.com/cgi-bin/rinfo2html?267899.faq
I haven't seen a good example of how to support both the 32 and 63-bit environment. -
How to refresh target system name
Hi, buddies.
The target host name which saved as hostname and IP pair in the OS hosts file is used in the RFC connection or HTTP connection from SAP ECC to XI.
Rightnow I will change the target XI system into a new one and I replace the same hostname with a new IP which represents the new target XI system.
However the ECC still connect to the old XI system through hostname. I am wondering whether there are some configurations in the ECC that can refresh the setttings.Hi,
If new xi system also same IP address . Using IP address if you maintain the connection at ECC system end and User ID's, pwd's are same..i don't think you require to refresh the target system.
Just check the RFC Destination R/3, XI end it's able to connect both.
Regards,
Venu. -
How to add operation system user in atable
oracle 10g and Oracle Enterprise Linux 5.4
i wouil like to add operation system user name in a oracle table so that i can monitor data in the particular tableYour question is unclear.
Check also v$session dynamic performance view may be you can get information from this view which you can pull into your custom table.
And your query is about finding who is connected then,
To know about the list of users that is now connected and the time when they connect to database issue the following query.
SQL> SELECT s.username, s.program, s.logon_time
FROM v$session s, v$process p, sys.v_$sess_io si
WHERE s.paddr = p.addr(+)
AND si.sid(+) = s.sid
AND s.type = 'USER';
USERNAME PROGRAM LOGON_TIM
SAMI sqlplus@testerp (TNS V1-V3) 26-NOV-10
oracle@testerp (J000) 26-NOV-10
To know only the current session user name you can issue the following query,
SQL> SELECT USERNAME from v$session where audsid = sys_context('userenv','sessionid');
USERNAME
SAMI
To know about on which schema you are connecting issue following query.
SQL> SELECT sys_context('USERENV', 'CURRENT_SCHEMA') FROM dual;
SYS_CONTEXT('USERENV','CURRENT_SCHEMA')
SAMI
To know about the connected user user for the current session issue,
SQL> SELECT sys_context('USERENV', 'SESSION_USER') FROM dual;
SYS_CONTEXT('USERENV','SESSION_USER')
SAMI
If you use SQL*plus then simply issue,
SQL> SHOW USER;
USER is "SAMI" -
How to add EP system in maintanance optimizer.
Hi All,
I want to add portal system in maintanance optimizer for downloading the patches.
EP version is 7.0 SP10.
sol man is st 400 SP10.
Regards,
SrinivasHi Srinivas,
Please add your EP system in solution manager SLD in smsy tcode. add your server in logical components and as well as other locations in smsy. Make sure that your user and S# exists in tcode aisuser.
Thanks,
freel free to revert back
Maybe you are looking for
-
Premiere CC and/or Media Encoder audio bad renders
Occasionally, but not always, when I export a timeline to Media Encoder queue, the video renders out with no audio. I have not found a repeatable way to replicate this, but when it happens, it really blows up my workflow. Typically I: Import a ProRes
-
Migrate SAP AR open item to SAP AR Open Item
What is the best method to migrate AR Open Items from one SAP system to another? cheers, RG
-
PS Elements 2.0 ???
I recently purchased PS elements 2.0 at a garage sale. Is it worth installing? I realize it is an old version. lindasew 47
-
I deleted my Mail app sometime back. I reinstalled it again, today, on my Macbook Snow Leopard Mac OS but when I try launching Mail, it says ' You have Mail version 4.0(1075/1085). It can't be used on Mac OS X version 10.6.8(Build 10K549)",
-
F4 Calander Help in Date Field
Hi, I have added one date field in PCUI, through Date Functions (IMG). Date is shown in Webclient but it is not having F4 Help (Calander). How to set up. Please help me. Thanks. Chetan Shah