Version setting for MIGO

Hi,
While doing Goodss Issue against a Reservation My screen is showing in the General Tab;near print icon - 1 Individual Slip
Can anybody show me the setting so that it will come as 3 collective Slip by default when ever I try for Goodss Issue against a Reservation using MIGO?
Please note for my colleague it is coming as 3 collective Slip where as for me it is 1 Individual Slip
Thanks & Regards
Raajendra

Hi Rajendra!
MIGO "remembers" the last values for which the transaction was used the last time.
If you change the default setting from "Individual Slip" to "Collective Slip" and re-execute the transaction, MIGO will default the data with the last time you used it: This time you should get "Collective Slip" by default.
Please, try this. I hope it helps!
Esther.

Similar Messages

Version sets are gone....!!

Hi there!
My computer just crashed last week - apparently got a nasty virus infection that went through the firewall. Consequently I had to reformat the hard drive and reinstall the whole system (Windows 7). Of course I had a back-up of all my pictures so this is not a problem. The pain is that I have to reinstall all the softwares...! Today I reinstalled Photoshop Element 8 from the installation CD I have and directly after I imported all pictures again in the organizer. Everything went fine though of course it took some time as I have many pictures. The problem now is that all my Version Sets that I had have disappeared!! Pictures belonging to the same Version Set are there but they are not included in a Version Set anymore. I use to have Version Sets for different formats of the same pictures, for instance jpg, PSD and NEF, as it is very helpful. This is very annoying as I had plenty of these Version Sets and they were helping me big time in my work flow.
Do you know if there is a way to get them back? I would me the most thankful if you could help me on that one!
All the very best

Leunammeod wrote:.I guess that I’ll have to recreate manually my version sets. Is there a smooth and “less” painful way to do it in Element 8?
.You can't recreate version sets, they are only created when you save an edited file ; but you can create stacks, either manually, or by using the help of the 'automatically suggest photo stacks' feature based on visual similarity.
The integrated backup/restore you’re mentioning is the one included in the file menu of the organizer (Ctrl+B) isn’t it?
Yes.
Actually all my hard drives are pretty full but I do recall (I may be wrong) that Adobe was offering (free of charge or not?) the possibility of having an online backup. Is this backup compatible with the integrated backup/restore process or does it work differently? For instance does it allow me to backup catalogs too?
Adobe did offer the photoshop.com service (not for european users...) for such online backup, but this is being replaced by Revel. I don't use those, so I'll let more competent users comment about this possibility. Online backup for big catalogs of images seems to me problematic due do transfer speed.
I looked for the catalog as you told me (help menu/System info) and it seems to be a folder containing several files. If I want to make a backup of my catalog manually (via Windows explorer) do I have to save the whole folder or just the PS8DB file included there? How do I restore catalogs if I choose this option?
Yes, it's quick and easy to copy the catalog folder manually, or you can include that folder in your external backup software scheme. If you restore both the catalog and the image files in the original location, no problem. You can even move or restore the catalog folder manually : if you double click the file catalog.tly in that folder, that will work as well. The content of the catalog (a 'list' to simplify) is always valid even if the catalog is moved. The advantage of the integrated backup is that it can update the contents of the catalog even if the original file tree is restored on another drive or master folder. Suppose you want to restore all your files to a new drive : the catalog copy would hold the old picture files location and would show all of them missing. You'd have to use a 'reconnect' function to update the catalog (never easy !).
Is the metadata you're talking about equivalent to the XMP sidecar file?
Yes, the xmp sidecar file system is used to store that same information for file formats which do not support writing that info in the metadata section of the file itself : especially for raw files, whereas jpegs can hold that information.

Version set problem

I have been using version seta for years,but now when I try to save an edited picture in a version set the organizer throws it away. Anybody else have this problem?

My catalog is roughly 12,000. The view I use shows the version set and the file information, i.e. Nef, Jpeg details.
Tim

How can i set a layout for MIGO screen

Hello all,
How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

Hi
First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
After creating the variant tick the check box use as standard setting below the variant
Hope it helps
Edited by: Girish Adaviswamy on Mar 3, 2010 1:27 PM

HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off.

Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off. The answers given by 'Staff' are incorrect - it is NOT locared within Help/Adobe Product Improvement Program! I use W7 64bit.

daveteauk2 wrote:
Where is the privacy setting for the trial version of cs6 photoshop. I would like to turn it off. The answers given by 'Staff' are incorrect - it is NOT locared within Help/Adobe Product Improvement Program! I use W7 64bit.
You are correct.
The privacy settings will be those of the "trial experience" and that has nothing to do with the APIP.
Maybe this image will help:

HT4972 where can I find the update setting for my ipad 4 version?

Where can I find the update setting for my ipad 4 version?

The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

I must and I mean must use version 19 for my banking software. I had it set not to upgrade and now i have a newer version. I cannot use another browser.

I have to use version 19 for my banking software. IE and others won't work. I had computer set to not upgrade firefox and i happened anyway. I MUST GO BACK TO 19

Oops, I see you said IE doesn't work with your bank. Well, if you don't mind closing Firefox 30 while you bank, you could use the Portable Edition of Firefox 19 for your banking. As Tyler describes, it has security holes in it, so you should limit use to trusted sites.
http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox%2C%20Portable%20Ed./Mozilla%20Firefox%2C%20Portable%20Edition%2019.0.2/

Output Determination Configuration Setting for GoodsIssue(Transfer Posting)

Hello Gurus,
Can any one give the details for Output Determination Configuration Setting for Goods Issue(Transfer Posting).
Thanks N Regards,
Venu MG

hi,
PRINT OUT OF MATERIAL DOCUMENT AT GI/Transfer posting:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
Now go to MB90 entered the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. Sytem outputted all the material documents that has to be taken print out.
Regards
Priyanka.P

Oracle 9.2.0.3.0 patch set for windows - questions

Hi!
I have for that some questions. I have oracle 9.2.0.1.0 on a windows 2003 server running with one local database - no real apllication cluster.
I don't understand which instructions I have to make for oracle upgrade?
Must I also make the 3. instruction? Connect to databse prior and drop?
Must I also make the post install action for my database?
(startup migrate ...)
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?
Thanks for help!
1. When applying this patchset on Windows NT, XP or Windows 2000, you must log onto the system as a user with Administrative privileges
(e.g. as a user which is a member of the local Administrators group).
2. Unzip the downloaded patch set file into a new directory.
3. Drop the xmlconcat function by running the following commands:
drop public synonym xmlconcat;
drop function xmlconcat;
4. Shut down any existing Oracle Server instances in the ORACLE_HOME to be patched with normal or immediate priority. i.e.: Shutdown all instances (cleanly). Stop the database services, and stop all listener, agent and other Oracle processes running in or against the ORACLE_HOME to be installed into.
5. Perform the following pre-install steps for Real Application Clusters (RAC) enviroments only:
IN ADDITION TO STOPPING ALL ORACLE SERVICES IN THE ORACLE_HOME TO BE UPGRADED:
If you are running in a RAC enviroment, stop the following Windows service(s)/devices(s) using the Net Stop command:
Stop the Windows service named "OracleGSDService"
Stop the Windows service named "OracleCMService9i".
Stop the Windows device named "OraFenceService" (This Device does NOT show up as a Service in the Control Panel).
For Example:
C:\>net stop OracleGSDService
C:\>net stop OracleCMService9i
C:\>net stop OraFenceService
Once the above steps have been performed on all the nodes of the cluster, you should then be able to upgrade the OSD components to the 9.2.0.3 versions. This can be accomplished by...
xcopy all the files in the \Disk1\preinstall_rac\osd\*.* directory to the directory in which the OSD components were originally installed on all nodes(typically %SystemRoot%\system32\osd9i).
Note: You may also be able to look in HKEY_LOCAL_MACHINE\Software\Oracle\OSD9i registry key to determine the directory in which the original OSD components were installed. Now the OSD components can be restarted on all the nodes in the cluster.
C:\>net start OraFenceService
C:\>net start OracleCMService9i
C:\>net start OracleGSDService
After all of the above steps have been completed on all the nodes of the cluster, you are now ready to proceed with the Oracle 9.2.0.3.0 patchset installation.
6. Start the installer:
If the current Installer version is less than 2.2.0.18.0 then download the Installer 2.2.0.18.0 from Oracle Metalink where it can be accessed with the bug number 2878462 and choosing the MS Windows NT/2000 Server platform, then run the setup.exe 2.2.0.18.0 from the C:\Program Files\Oracle\oui\install directory .
7. You may install the Patch Set through either an interactive or a silent installation.
To perform an interactive installation using the Oracle Universal Installer graphical interface:
1. Start the installer from the newly installed OUI 2.2.0.18.0 by running the version of setup.exe located at C:\Program Files\Oracle\oui\install and verify
that the version of the OUI GUI is 2.2.0.18.0 before proceeding.
2. Follow the steps given below within the installer:
1. On the Welcome screen, click the Next button. This will display the File Locations screen.
2. Click the Browse button for the Source... entry field and navigate to the stage directory where you unpacked
the Patch Set tar file.
3. Select the products.jar file. Click the Next button
The products file will be read and the installer will load the product definitions.
The products to be loaded will be displayed (verify ORACLE_HOME setting for this first).
4. Verify the products listed and then click on the Install button.
5. Once the installation has completed successfully, it will display End of Installation. Click on Exit and confirm
to exit the installer.
To perform a silent installation requiring no user intervention:
1. Copy the response file template provided in the response directory where you unpacked the Patch
Set tar file.
2. Edit the values for all fields labeled as "<Value Required>" according to the comments and examples
in the template.
3. From the unzipped patchset installation area, start the installer by running the setup executable passing
as the last argument the full path of the response file template you have edited locally with your own
value of ORACLE_HOME and FROM_LOCATION:
setup.exe -silent -responseFile <full_path_to_your_response_file>
Post Install Actions
Execute these "Post Install Actions" only if you have one or more databases associated to the upgraded $ORACLE_HOME.
Important Notes
1: Java VM and XML DB Requirements
Users who have JVM (Java enabled) or JVM and XDB installed on their 9.2.0.1 databases should make sure that the init.ora parameters shared_pool_size and java_pool_size are each 150 MB or more before running the catpatch.sql upgrade script. Failure to do so could result in an unrecoverable memory failure during running of the script. Please note that JVM and XML DB was shipped as part of the default 9.2.0.1 seed database and will be present unless the user explicitly installed a 9.2.0.1 instance without them.
2: SYSTEM table space
If you have JServer installed in the database, you should check to be sure there is at least 10M of free space in the SYSTEM table space before running these actions.
3: Installing on Cluster Databases
If you are applying this patch set to a cluster database, then set the CLUSTER_DATABASE initialization parameter to false. After the post-install actions are completed, you must set this initialization parameter back to true.
To complete the installation of this patch set, you need to start up each database associated with the upgraded $ORACLE_HOME, start the database listener (e.g., lsnrctl start), login using SQL*Plus (e.g., sqlplus "/ as sysdba"), and run the following commands/scripts in order from $ORACLE_HOME within a MIGRATE session. If you are using the OLAP option, make sure that the database listener is up.
startup migrate
spool patch.log
@rdbms/admin/catpatch.sql
spool off
Review the patch.log file for errors and re-run the catpatch script after correcting any problems
shutdown
startup
This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this in multiprocessor machines:
@rdbms/admin/utlrp.sql
Execute the following if you use Oracle OLAP option:
alter user olapsys identified by <password> account unlock
connect olapsys/<password>
@cwmlite/admin/cwm2awmd.sql
exit
Execute the following script only if you have version 9.2.0.1.0 of Oracle Internet Directory installed in your ORACLE_HOME. Make sure that the database and database listener are running and that all parameters are specified prior to running the script:
$ORACLE_HOME/bin/oidpatchca.bat
-connect <Connect String>
-lsnrport <Listener Port>
-systempwd <SYSTEM Password>
-odspwd <ODS Password>
-sudn <Super-User DN>
-supwd <Super-User Password>
-dippwd <Password to register DIP Server>
Where:
connect - Database connect string
lsnrport - Database Listener port
systempwd - Password of the database 'SYSTEM' user
odspwd - Password of the database 'ODS' user
sudn - Super-user DN
supwd - Super-user Password
dippwd - New password to register Directory Integration Server. This password must conform to the password policy in the OID server
Execute the following steps only is you are using the RMAN catalog.:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;

I don't understand which instructions I have to make for oracle upgrade?
-- You have to follow all the instructions mentioned
(Just check for few if's for Cluster enabled, OID and OLAP databases. Perform these steps only if they apply)
Must I also make the 3. instruction? Connect to databse prior and drop?
-- Yes you should do
Must I also make the post install action for my database?
(startup migrate ...)
-- Yes. Do run catpatch.sql .
what means at post install actions the following:
'execute these post install actions only if you have one or more databases associated to the upgraded $oracle_homee.
-- In this step make sure you do step 1
1: Java VM and XML DB Requirements
Otherwise catpatch.sql will fail.
Do 2 and 3 only if applicable
Chandar
My database path is e:\oracle\oradata\database my oracle path is e:\oracle\ora92 have I in my case make the post install actions?

Delivery completed" indicator cannot be set for item 00001

Hi all,
I have done a inter company stock transfer order , with respect to that Order I made Outbound delivery and posted GR with respect to outbound delivery. I have done MIRO for PO for all the Item ,
Now I need to return some material to supplying plant for some reason, I tried to make GR (MIGO) against the same outbound delivery with movement type 122. the document is posted but when I tried to make complete delivery indicator it does not allow me to do so .
it says me
Delivery completed" indicator cannot be set for item 00001
   Message no. 06 848
Diagnosis
   You have set the "delivery completed" indicator for a stock transfer item.
system Response
   You can only set the "delivery completed" indicator in stock transfer items if
   o   the sum of the goods issue quantities in the supplying plant equal the sum of the goods receipt    quantities in the receiving plant.
   o   the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Regards,
Dhilipan.

I dont think you need to set "delivery completed" indicatory while returning from one plant to another.
For example : You ordered 100 qty. and you are receving only 80 Qty. and you don't expect any receipts anymore. in this case you want to close the open purchase order with delivery completed indicator.
But while returning to vendor or to another plant you are not referring the P.O directly and hence you dont need "delivery completed indicator'

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

Temp folder was not set for RTFStringbuffer Error

Hi,
We are using CR XI 11.0.0.895 and CR XI JRC is been used to generate the reports in PDF and RTF format.
While generating report of more than 1000 pages in RTF format throws the below mentioned exception
temp folder was not set for RTFStringbuffer
However, Generating reports in PDF format generates the report.
Find below the environment details which would helpful for the analysis.
CR XI 11.0.0.895
IE 6.0
MS-office 2003
Windows XP SP2
Reports JRC application deployed on Weblogic 8.1.4
Please suggest us a solution for this problem.
Thanks in advance.

If you run [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx], do you see any file access errors when the JRC tries creating a temp RTF file?
I think I've recommended this before, but have you tried the newest version of the JRC?
[https://boc.sdn.sap.com/node/19020]
The XI Release 1 keycode will work with it.
Sincerely,
Ted Ueda

Can no longer save edited images in version set with PS 10.

I've been using PS 10 for many months and have been able to save my edited raw images as jpgs in version sets. I can no longer do this. The edited images save on the hard drive but not in the PS organizer...thank you for any help you can offer....

Ok, you need to know what you want to do with your image. For example if it's for the web the best way to save to jpg is.. File-Save for Web, then you will see a Box with four pages,, you can choose: Original which is going to be your original image,... Optimized which is a Lower quality version. 2-Up and 4-Up.
when you click on 4-Up Tab you see your original image in the top left, Also you have your image in 3 different windows with different file size and speed. You can click on each window and inside the Preset in Top right choose JPEG. and you can change the quality from Low to High or Drag the Quality Slider for different quality.
NOTE: when you do File-Save For Web,, you are going to have a flatten Image.. you will loose your Layers.
It is always better if you shoot your images In higher Res, such as 240, or 300 dpi, and later Down-sample the image to a lower quality for the web. If you have the original image at Higher Res, First you should Go to Image Image-size For Example Height 1200 Pixel. If you go ahead and save the file for the web then you don't need to change the Resolution. don't forget to Sharpen your image when you Down-sample

Version setting for MIGO

Similar Messages

Maybe you are looking for