Very slow download speed with Airport Express

Hi.
I've recently experienced painfully slow downlink (download) speed using Airport Express.
My WiFi configuration:
- main router: WRT54G connected to my provider (speed limit: 4Mbit up/down link),
- AirPort Express with WiFi N and Airtunes hooked up to stereo in living room,
- AirPort Express WiFi G and Airtunes connected to stereo on bedroom.
Second Airport is currently not used to simplify tests and description of my problem.
The problem: when connecting from MacBook to Airport Express I can't reach more than approx. 512kbit downloading from internet, usually even 300kbit, while uplink reaches easily 2.5Mbit (limited probably by my network provider). While connected to WRT54G I can get 2.5 up to 4Mbit downlink, same when using cable directly plugged in to WRT54G.
I tried changing channels, switching different options in Airport with no effect - still getting pathetic download speeds. Even worse - browsing experience is awful, with frequent slowdowns, etc.
I tried different encryption methods, and seems like only switching it off at all (unprotected network) seems to let my Airport work on full speed (2.5Mbits symmetrically up/down, up to 4Mbits - provider speed limit) - which is unacceptable, I refuse to set up and use unprotected network at home.
Problem is clearly in Airport or in interaction between Airport and Macbook. I've just ran out of ideas - can you help me?

I can't offer any help with your problem except for the fact that mine has recently done the exact same thing. It's ridiculous, for months and months it was extremely fast and then all of a sudden it takes 20 minutes to open a simple browser page. Something is definitely wrong with the airport because all other wireless internet connections from other routers are as usual. \

Similar Messages

  • Very slow download speeds with ATT U-Verse

    Hello,
    Experiencing very slow download speeds with Macbook Pro 2011, on Lion,  and ATT UVerse Max, which should allow for an avg. 11-12 MBPS speed. Instead, I get a fluctuating 60-370 kbps speed. I am not experiencing this problem on my Windows machines (Laptop running Windows 7 and Desktop on XP), it is only affecting the Macbook pro. I wonder if this issue is a known problem with ATT U-Verse and Macs, I spent hours yesterday with their support online and they couldn't help me, stating that from their side all settings were OK; the first representative from ATT re-booted the router remotely and that seemed to work for about 10 minutes, and then it went back to a crawling speed...
    Any suggestions welcome!
    Thanks

    Do you have QOS enabled in your router? Did you try plugging the win7 laptop directly and check the speed?

  • Very slow download speed with intermittent halts

    Need some help.
    I run Apple os/x latest version and have since yesterday begun to experience constant very slow download speeds.
    I have rebooted the router and I have reset it. I have tested with wireless and wired into router. No real change.
    The results are below and are pretty consistent no matter when or with what computer I test it with.
    This is very frustrating and I would like to know if anyone has experienced this and if there is anything I can do before calling for service.
    Thank you in advance.
    Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
    SendBufferSize set to [131768]
    running 10s outbound test (client to server) . . . . . 5.44Mb/s
    running 10s inbound test (server to client) . . . . . . 1.94Mb/s
    ------ Client System Details ------
    OS data: Name = Mac OS X, Architecture = x86_64, Version = 10.8.2
    Java data: Vendor = Apple Inc., Version = 1.6.0_37
    ------ Web100 Detailed Analysis ------
    Client Receive Window detected at 359104 bytes.
    10 Mbps Ethernet link found.
    Link set to Full Duplex mode
    Information: throughput is limited by other network traffic.
    Good network cable(s) found
    Normal duplex operation found.
    Web100 reports the Round trip time = 22.89 msec; the Packet size = 1448 Bytes; and
    There were 159 packets retransmitted, 288 duplicate acks received, and 394 SACK blocks received
    The connection stalled 9 times due to packet loss
    The connection was idle 2.01 seconds (16.75%) of the time
    This connection is sender limited 35.49% of the time.
    This connection is network limited 64.51% of the time.
    Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch
    Web100 reports TCP negotiated the optional Performance Settings to:
    RFC 2018 Selective Acknowledgment: ON
    RFC 896 Nagle Algorithm: ON
    RFC 3168 Explicit Congestion Notification: OFF
    RFC 1323 Time Stamping: ON
    RFC 1323 Window Scaling: ON
    Information: Network Middlebox is modifying MSS variable
    Server IP addresses are preserved End-to-End
    Information: Network Address Translation (NAT) box is modifying the Client's IP address
    Server says [71.100.xxx.xxx] but Client says [192.168.1.9]

    Both wired or wireless.
    auto - negotiate 
    Thank you.

  • Very Slow 12" Powerbook with Airport Express - 15" PB OK

    Here's my problem; Our 12" 1.5 PB is very slow with Airport Express but It is OK when directly connected to the cable Modem via Ethernet. We also have a 15" PB 1.67 that works great with Airport Express & Ethernet. The 12" PB takes approximately 4-10 times longer to load Internet pages than the 15" PB. Here's what I've tried so far without success;
    - made sure software was up to date (10.4.8)
    - turned off the A/E security
    - different A/E channels
    - moved the A/E base station to another location
    - a differrent A/E base station
    - a Linksys WRTG54 base
    - new Airport Extreme Card in 12" PB
    - ran Apple hardware test on 12" PB - checks OK
    - re-installed fresh OS and Apps from original install disks
    - Firefox instead of Safari
    - new user account on 12" PB
    - re-installed original 512 RAM
    Any suggestions would be greatly appreciated!

    Jerry,
    You're not going crazy, by the way. I have the exact same problem with my 12' Powerbook. I even tried swapping airport cards with another Powerbook. No luck. Ethernet is ok.
    Any help is appreciated.

  • Very slow transfer speeds with Airport Extreme and MacBook

    I have been using a new Airport Extreme without problem at my home for the past six weeks. The speed and range was excellent with both my MacBook Pro and the MacBook which I purchased a few weeks ago. I came out to Greece with both laptops and a new AP Extreme box for my home network here. After set up I noticed that internet access was lethargic on the MacBook and file transfer between the two computers was extremely slow. The problem seems to be with the new MacBook (although it was working well in London). I've done some speed tests and the internet download speed is only 48 kpbs! I also notice that the range is very poor--in the room next to the router I am down to five bars. If I connect to the AP Extreme with cable I get the full 1Mbps I would normally expect here in Athens (ADSL nominal 2Mbps). The MacBook Pro has no problems with wireless access speeds or range, so I am assuming this has to be a problem with the AP extreme card in the MacBook. Is there anything I have overlooked? Perhaps something to do with setting up the new AP Extreme here in Athens?

    By process of elimination I realised that the only cause of the sudden slowness must be software that I had installed recently. The only software I had added was a wifi utility to detect available networks--open or protected. Unlikely as it sounds, quitting the utility (which I had set to load on startup) made a dramatic improvement in performance.

  • Slow transfer speed with Airport Express N in an N-only 5Ghz network.

    I have a Time Capsule set to 802.11n-only (5GHz).
    My new Airport Express N is set to extend such network.
    I have a Mac Mini connected via Ethernet to the ethernet port of the Airport Express; however when I transfer files from the Mac Mini to Time Capsule the speed is incredibly slow (1 Megabyte of data every 3-4 seconds).
    I know I'm supposed to get 100Mb/s via the Ethernet airport.
    Any ideas?

    I have the same problem with the 5ghz mode from my time Capsule. The connection is fine until the wireless connection is maxed out, then the wireless conenction drops and I have to click on the airport toolbar icon to get it reconnected (Just click on the menu item...I dont actually have to re-select the wireless network).
    Dropping down to the 2.4ghz mode solves the problem, but I want the bandwidth increase 5ghz gives me. Thats why I bought the Time Capsule to begin with.
    Some have said that this issue started with Leopard. I cannot confirm this since I didnt have any 802.11n equipment until after I upgraded to Leopard. Also, I noticed that with Time Capsule firmware 7.3 the connection drops but the airport icon stays solid. In 7.3.1 the connection drops and the airport icon greys out (indicating no connection).

  • Very slow download speeds with new laptop with windows seven- WRT160N Router

    Just bought a new Laptop with windows 7 and  of course wireless.  Download speeds are horrible (0.2 mbs)  and upload speeds are normal for me ( 8mbs) Have a wrt160N  Wire less router.   Older laptop  and desktop work fine  with normal( around (8mbs) downloads and uploads.  
    How do I fix this? 

    Do you have QOS enabled in your router? Did you try plugging the win7 laptop directly and check the speed?

  • Very Slow Download Speed

    Hi,
    I am experiencing very slow downloading speeds, when I am just normally downloading something in Safari, or downloading a torrent with upto 100 seeders.
    The maximum download speed I have seen on my computer is 80kb/s, which is painfully slow for downloading the Adobe trials, when they reach about 1gb.
    I have a router, connected to 2 computers, and speedtest.net has told me that my download speed is 1mb/s.
    It seems like download speeds are being restricted to 80kb/s, so is there any way to 'unlock' full potential downloading speeds?
    Any help much appreciated!
    -Ollie
    Message was edited by: Ollie A

    I think you're making the same mistake a lot of people make.
    The maximum download speed I have seen on my computer is 80kb/s
    Safari reports downloads in kiloBYTES per second, not kilobits, so that 80KB/s translates to about 640 kilobits per second.
    downloading the Adobe trials, when they reach about 1gb
    Really? 1 gigabit per second? I assume that's a typo.
    speedtest.net has told me that my download speed is 1mb/s
    therefore your downloads are progressing at about 64% of maximum. That sounds about right - you won't get maximum throughput for every download - it will vary based on server location, network load and more.

  • E1200 router: very slow download speeds, ok uploady got

    I recently set up a new E1200 router to replace my old one. We are having problems with very slow download speeds (often <0.10 Mbps) even while the upload speeds are OK (8-10 Mbps). Our previous download speed over wifi was 10-15 Mbps.
    When I first set it up, the download speed was very poor on the initial computer. After fooling around, it was fine. I don't know what I did that made it speed up. However, my wife's computer has had very poor download speeds. After rebooting my computer, the download speed has also dropped bak to <0.10. I was able to stream Hulu on my Wii just fine an hour ago.
    What could the problem be?

    So we could have this isolated, check how much speed you’re getting straight to the modem so we’ll have some point of comparison that from your internet provider. If through the router, you have struggles with not getting an acceptable value for download speed especially if it only happens with the wireless connection, you can try these: change the wireless channel and the wireless security on the router. If on the router, you have the channel set to auto by default change it to (3,6,9,11), just have to play around with it. Moreover, for the wireless security, select WPA2 Personal. If that doesn’t make any difference, update the firmware of the router, reset and have it reconfigured.

  • Why i have very very slow downloading speed on wifi on iphone5

    While on wifi I am experiencing very slow downloading speed on iPhone 5. My iPhone 5 is a brand new phone, I have to wait for hours to complete a running download of about 40mb or so. Please help me and tell me if there is any solution to that. On the same wifi network I have the new iPad and iPhone 4 and iPhone 4S, all are working perfectly getting perfect speed while downloading but I can't on iPhone 5.

    What you did was fine. Leopard is a little different to 10.4.11, but:
    Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
    Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
    In First Aid, click on Repair Permissions.
    This only takes a minute or two.
    Background information here:
    http://docs.info.apple.com/article.html?artnum=25751
    and here:
    http://docs.info.apple.com/article.html?artnum=302672
    If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
    Once that is complete reboot again from your usual start-up disk.

  • Help : very slow connection speed with AEBS and iMac

    I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
    So, where is the problem??
    I am new to wireless, please help. I use iMac more than my MacBook at home.
    Actually, i did not touch the any of the advance setting of the AEBS.

    You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
    Anyone???

  • Very slow download speed on ipad 2

    Okay folks I need your help.  I have just installed an Airport Extreme (newest model) wirless router and a new Motorola Sufboard modem and my interenet download speed is pretty good on the pc (23-25 Mbps).  However, when I run the speed test on my ipad 2 it is pathetic (.14 - .18 Mbps).  My iphone 4 is getting about the same download speed as well.  I have reset all devices, tried forgetting the network and then signing on again, but nothing helps.  What could be causing the slow download speed on the Apple products?

    Okay I got it.  I went into the Airport Utility and changed the channel selection from automatic to manual and then I changed the channel to something different.  There are a lot of house in my neigborhood and I guess the default channel 6 was just way over crowded.  Just did another test on my iphone4 and got a download speed of 18.33 Mbps.  The ipad2 yielded a new speed of 24.24 Mbps.  Much better now.  Thanks!

  • More Than One Computer Trying to Access Web = Very Slow Download Speeds?

    We have Verizon DSL with a basic Westell modem, which supposedly is only a modem with no router capabilities. We have an Airport Extreme Snow Base Station that acts as a WDS Main, with one other AEB Snow as a WDS Remote. All computers have unique ip addresses in the 10.0.1.X range as provided by the WDS Main's DHCP.
    When only one computer connects to the internet to download web pages, software updates, etc., there seems to be no problem at all. When I do a speed check I get results that seem to be in the correct range, and it doesn't matter which computer I use for the test.
    However, if we try to access the internet with more than one computer at the same time, everything slows to a crawl. Such as, if one computer is downloading software updates, the other CPUs have super slow web page downloads, slow to the point of connection time-outs at times. Or if two of the computers are simply trying to download web pages at the same time, one or the other has super slow downloads.
    I feel like there is some kind of routing problem with the Base Station but for the life of me I cannot figure it out.
    What could the problem be? Where could it originate, and what, if any, advice could someone give me to help trace the problem?
    Thanks in advance.

    ... the one computer I am looking at right now shows DNS servers as 10.0.1.1, which is the internal ip address of the AEB. Could this be part of the problem?
    That is normal and shouldn't cause a problem. Essentially it tells the computer to ask the snow AirPort base station (ABS) for DNS information. The ABS will then provide the DNS information which it currently received from the ISP.
    Would it help if I manually entered the DNS numbers that appear on the AEB on each machine's Network Preferences?
    Probably not. A busy DNS server or faulty DNS info won't affect download speeds. That only affects browsing since that requires the computer to convert human readable addresses to numbers that the computer can use.
    Remember that the snow ABS only operates at 802.11b (11 Mbps) speeds. Then when you use WDS it cuts your available wireless bandwidth in half.

  • Slow wireless printing with Airport Express

    I have a Canon MP530 printer hooked up to an Airport Express for wireless printing. My wireless internet network is through an Airport Extreme. The only thing hooked into the Express is the printer, and it works but is extremely slow. It can take an hour to print one 15 page document. Any ideas how to fix this?

    I'm not sure I understand your question, or at least I don't know how to tell connection speed with the utility. The express is set up as an extension to my current wireless network, although I'm only using it for printing.
    I had a similar experience with a hard drive wirelessly connected to the Extreme - data transfer was ridiculously slow. Is this something to be expected with wireless connectivity?

  • Sudden slow wifi connection with Airport Express 802.11n

    Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
    Thanks

    willcyrier wrote:
    Do I have to change anything on my computers?
    you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
    however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
    good luck !

Maybe you are looking for

  • Acrobat 9 Distiller Error, Win7 64bit

    Hi Guys, I am having a problem on Acrobat 9 distiller when it creates a pdf it gives this error: D:\xxxx\ssss\somefile.ps Cannot open this file. Please check that correct path and filename are given. I am using Office 2010 Pro as well. Please I need

  • External hyperlink to specific place in a PDF file?

    Is it possible to have an external hyperlink on a webpage to a specific place in a PDF file? If so, how is it done? I would be creating the PDF file in InDesign. Thanks

  • Maven project "src" directory not visible in Application Navigator

    JDeveloper 11g Release 2 (11.1.2.1.0) First-time user I built a Maven application containing two Maven projects in JDeveloper but am unable to see the "src" directory in the Application Navigator. When I attempt to create this directory the tool tell

  • Can I use single words in a paragraph to show other elements on the stage?

    I want to put a paragraph on the stage. The paragraph would look like this:     " Yada yada yada... so either click here to read Note1, or click here to read Note2. " As you might guess, I want the user to be able to click the underlined words in the

  • How to access an action's Due Date through the GP API

    I'm new to the GP API, and I would like to know how can I get/set an action's due date and notifications at runtime. Is it possible to create new actions and attach them to a process? Thanks in advance