Very strange issue when using initial context to lookup for beans...

hi, friends,
I am currently try to call a bean from a remote ejbclient.
I set the initialcontext like this with the url suppose to be:
Properties p = new Properties();
p.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
p.put(Context.PROVIDER_URL, url);
ctx = new InitialContext(p);
and look up home like this with the Name suppose to be:
Object h = null;
h = ctx.lookup(Name);
but the strange thing is, the programme just stops when it is doing ctx.lookup(Name); However I try to log it, but it is just stopping there, without throwing any exceptions and errors.
But, when I gave it a wrong name to like at, it could go through ctx.lookup(Name), and throw some exceptions like "unnable to look up beans.." which I put in the catch part...
I try to echo the "ctx", and it is not null. and I try to echo "h", but it just stop before the "h" getting anything...
the ejbclient is compile with jdk 1.4, because it is on a server with jdk 1.4, and deployed on weblogic 8.1. and the bean.java is compiled with jdk 1.5, and deployed on weblogic 10.
Does anyone knows what is really going on here, when doing the lookup, what happened?
How could I know whether there are the ejbs I need to call are existing in the pool?
Thanks..
Looking forward helps. such an problem has bothered me for a couple of days, and my boss is pushing me on this. but I haven't get any idea on it...:(

And now the stranger things here... I didn't do much change to both the remote bean side and the client side, what I did is most like change it to something, and tried with failure, and change back.
But today 's morning, when I just change everything back to suppose to be, and it can find the homebean:
[2008-11-14 11:21:18,436] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) Looking up RepairEJB with JNDIName: RepairGatewayEJB_slsb
[2008-11-14 11:21:18,531] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) h is not null!!
[2008-11-14 11:21:18,532] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) got h: weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,533] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After ctx.lookup();
[2008-11-14 11:21:18,535] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) homeBean is weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,537] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After home bean;
[2008-11-14 11:21:18,589] [ INFO] [Thread-85] - Waiting for a request ...
but unfortunately again it just stopped at
remoteBean = homeBean.create();
with no errors and exceptions...
Does any experienced friends ever have this problem before?

Similar Messages

Very strange sound when using VoiceOver

Hi I am using my apple tv with VoiceOver when I am whatcing one of my movies that whas both
from iTunes Store and I puch the upp bottom on my remote 2 times to get the more info about
the movie I get a very strange sound don't know how to desgribe the sound it dose only come up
when the info aout the movie is up or any popup like window or is my hearing to good for my.

And now the stranger things here... I didn't do much change to both the remote bean side and the client side, what I did is most like change it to something, and tried with failure, and change back.
But today 's morning, when I just change everything back to suppose to be, and it can find the homebean:
[2008-11-14 11:21:18,436] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) Looking up RepairEJB with JNDIName: RepairGatewayEJB_slsb
[2008-11-14 11:21:18,531] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) h is not null!!
[2008-11-14 11:21:18,532] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) got h: weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,533] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After ctx.lookup();
[2008-11-14 11:21:18,535] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) homeBean is weblogic.rmi.internal.BasicRemoteRef@121 - hostID: '-891706141070674357S:113.128.134.59:[40010,40010,-1,-1,-1,-1,-1]:VPFSCTech:AdminServer', oid: '289'
[2008-11-14 11:21:18,537] [ INFO] [Thread-85] - {} getRemoteBean(Unknown Source) After home bean;
[2008-11-14 11:21:18,589] [ INFO] [Thread-85] - Waiting for a request ...
but unfortunately again it just stopped at
remoteBean = homeBean.create();
with no errors and exceptions...
Does any experienced friends ever have this problem before?

Very strange issue when displaying the Account PDF Factsheet.

We have a very odd situation.
We have one users (user1) who has the same business role as everyone else in the office. They can enter the UI (CRM 7), display an account and then click on the PDF Factsheet option. It seems to process and then simple says 'Done', but there's no PDF document displayed. At first I thought it was an Adobe issue, but, if someone in the office (user2) logs into SAP on user1's PC (in the same Windows session), they can perform the same process in the UI and the PDF is displayed, so it can't be a PC related issue, and must somehow be related to user1's SAP profile or role in some way.
Comparing User1 and User2's roles displays no differences, and their SU01 entries are also the same.
Can anyone come up any recommendations as to what it could be?.
I've more or less exhausted all my options.
Jason

I think we have discoverd what is causing the problem.
In CRM 7, when you view an Account (BP) the first assignment block to be show is the account details block. If you have this block collapsed (not expanded) or not on the screen at all then PDF fact sheet does not work. If I then expand the Account details block and review the PDF Fact Sheet, it then displays perfectly.
I guess there must be some dependancy of the PDF Fact sheet on the Account details block. I placed a breakpoint (normal and external) in the method of the class CL_UIU_PRN_ACCOUNT, but this code never gets called when the Account details block is collapsed. I'll have to find out what code is executed before this class/method is called.
Jason

Please help, Very strange issue when generate different template

Hello, Can someone help for below Strange Problem.
1. The PDF template files are defined in BI Publisher Layout as a.pdf, b.pdf
2. the parameters are defines in BI too
4. logic as below, generated PDF based on a.pdf. generated PDF based on b.pdf,
then merger a.pdf and b.pdf together.
5. Codes for generated PDF as below
this.reportDefinitionResp = bIPublisher.getReportDefinition(this.reportAbsolutePath, this.userID, this.password);
this.reportRequest = new ReportRequest();
this.reportRequest.parameterNameValues = this.reportDefinitionResp.reportParameterNameValues;
this.reportResponse = bIPublisher.runReport(this.reportRequest, this.userID, this.password);
6. the PDF generated by the a.pdf is correct, but generated by the b.pdf is not correct, instead it is same as a.pdf?
so after merger, we get the duplicate pages.
7. Not all templates has same issue, sometime we get this issue, how to fix it?

Hi
Click your HD to go to Finder,
Go to Your User/Library/Caches,
Drag com.apple.preferencepanes.cache to trash
Restart your macbook.
Good Luck.

Very strange bug when using a view with a date

Hi,
Just thought I'd point out this bug I'd found and see if anybody has had similar problems.
I'm connecting to Oracle 9i from servlets using the thin client-side JDBC driver. In the Oracle schema I've got a few views to another schema set up. One of them looks like this:
select
blah
blah
from
projects
where
project_start_date between '1-Apr-2000' and '31-Mar-2010'
Nothing wrong with this, you'd think. And indeed, the view works fine and any valid queries on the view also work fine if they're performed from anywhere apart from my servlets. The servlets can perform queries on all my other views but they think that this particular view is completely empty.
As soon as I change the view to:
project_start_date > '1-Apr-2000'
the servlets can see the data in the view.
Hope all this made sense. Anybody else had any similar problems?
Chris.

Any time you want to do a date comparison, you really want to do an explicit to_date conversion rather than relying on Oracle to do it implicitly. I'll wager that if you change the view to
SELECT <columnList>
FROM projects
WHERE project_start_date BETWEEN to_date('1-Apr-2000', 'DD-MON-YYYY') and to_date('31-Mar-2010', 'DD-MON-YYYY')that everything will work.
Justin

Error "Object refernce not set" when using http context in Eventreceiver for Document Library,

Hi,
Httpcontext returning null values when I used in item adding event of document library.
I have a document set home page which has document set properties(by default) and one OOTB document library is placed in the same page.When user clicking on upload documents in the ribbon I need to read the document set properties.
when uploading the docs if I pass the Hardcoded item id of the document set I am getting the values of the document set in the item added event.
now the problem, i have the id in the query string if i want to read the query string value using httpcontext in the itemadding event and pass it to item added event using httpruntime it is throwing "object reference error" .
if any body has any solution/workaround how to read the context in the document library event receiver,please help me out.
Thanks ,G1

Hi,
Did you use the HttpContext.Current method to get the current context?
You can use the HttpContext.Current to check whether it works.
There is a similar thread for your reference.
http://stackoverflow.com/questions/1601352/how-to-obtain-the-httpcontext-in-event-handler
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Very slow wirelesss when using iPhone 4S' personal hotspot for a MacBook Pro (MBP)...

Hello.
Last night, I was helping a client with his old iPhone 4S' personal hotspot as shown in http://support.apple.com/en-us/HT4517 web page. It uses Verizon Wireless 3G for his 4 GB data cellular connection. We got the wireless (WPA2) connection to work fine, but it was very slow like crappy dial-up modem speeds. Is this normal? iPhone's iOS v8.1.2's top screen says 1X (is this a speed number?) and left of MBP. Updated Mac OS X 10.8.5's top screen shows an infinite(?) symbol instead of that wifi arc symbol.
Thank you in advance.

yes, 1x is a speed indicator, and it is very slow. Even with 3g speeds, hotspot will be pretty slow, but still ok for simple surfing and emails and such, streaming not so much. For hotspot, you really kinda want to have at least 4g, preferably LTE.
About that 1x speed, you may want to see if you get that everywhere or just in that location. Ideally, in a good coverage area, you should not be getting such slow speeds. Might have something to do with the building you are in though. If you get the same outdoors, and your coverage area is good, you may want to call in and have someone troubleshoot your signal.

PL/SQL speed issues when using a variable

I have a very strange issue that is causing problems.
I am running Golden connecting to a 11g database.
I created a procedure to insert records into a table based on a query. The source query includes variables that I have populated prior to the insert statement. The problem is that if I use the variable for one very specific where statement, the statement goes from running in less than 1 second, to running in 15 minutes. It gets even more strange though. Not only does a 2nd variable not cause any problems, the exact same variable in the same statement works fine.
This procedure takes 15 minutes to run.
declare
    v_start_period date;
    v_end_period date;
begin
    select add_months(trunc(sysdate,'mm'), -1), trunc(sysdate,'mm')
    into v_start_period, v_end_period
    from dual;
    insert into RESULTS_TABLE
            (first_audit_date, last_audit_date,
            data_column1, data_column2, data_column3)
        select
            a.first_audit_date, a.last_audit_date,
            b.data_column1, b.data_column2, b.data_column3
        from
            SOURCE_TABLE_1 b,
            (select marker_id, min(action_time) as first_audit_date, max(action_time) as last_audit_date
                from SOURCE_TABLE_2
                where action_time >= v_start_period and action_time < v_end_period
                group by marker_id) a
        where b.marker_id = a.marker_id
            and exists (select 1 from SOURCE_TABLE_2
                where marker_id = b.marker_id
                and action_time >= v_start_period and action_time < v_end_period
                and action_type = 'XYZ');
    commit;
end;This procedure runs in less than 1 second, yet returns the exact same results.
declare
    v_start_period date;
    v_end_period date;
begin
    select add_months(trunc(sysdate,'mm'), -1), trunc(sysdate,'mm')
    into v_start_period, v_end_period
    from dual;
    insert into RESULTS_TABLE
            (first_audit_date, last_audit_date,
            data_column1, data_column2, data_column3)
        select
            a.first_audit_date, a.last_audit_date,
            b.data_column1, b.data_column2, b.data_column3
        from
            SOURCE_TABLE_1 b,
            (select marker_id, min(action_time) as first_audit_date, max(action_time) as last_audit_date
                from SOURCE_TABLE_2
                where action_time >= v_start_period and action_time < trunc(sysdate,'mm')
                group by marker_id) a
        where b.marker_id = a.marker_id
            and exists (select 1 from SOURCE_TABLE_2
                where marker_id = b.marker_id
                and action_time >= v_start_period and action_time < v_end_period
                and action_type = 'XYZ');
    commit;
end;The only difference between the two is where I replace the first v_end_period variable with trunc(sysdate,'mm').
I've been googling for possible solutions and keep running into something called "parameter sniffing". It appears to be a SQL Server issue though, as I cannot find solutions for Oracle. I tried nesting the insert statement inside it's own procedure with new variables populated by the old variables, but nothing changed.
Edited by: user_7000017 on Jan 8, 2013 9:45 AM
Edited by: user_7000017 on Jan 8, 2013 9:52 AM Put the code in code tags.

You are not describing procedures. You are listing anonymous PL/SQL blocks.
As for the code - this approach to assigning PL/SQL variables are highly questionable. As the functions are native PL/SQL functions too, there is no need to parse and execute a SQL cursor, do context switching, in order to assign values to PL/SQL variables.
This is wrong:
select
    add_months(trunc(sysdate,'mm'), -1), trunc(sysdate,'mm')
    into v_start_period, v_end_period
from dual;This is correct:
v_start_period := add_months(trunc(sysdate,'mm'), -1);
v_end_period := trunc(sysdate,'mm');Just as you would not use +"select 1 into plVariable from dual;+", instead of a standard variable assignment statement like +"plVariable := 1;"+.
As for the performance/execution difference. Does not make sense. I suggest simplifying the code in order to isolate the problem. For example, take that in-line SQL (aliased as a in the main SQL) and create a testcase where it uses the function, versus a PL/SQL bind variable with the same data type and value as that returned by the function. Examine and compare the execution plans.
Increase complexity (if no error) and repeat. Until the error is isolated.
The 1st step in any troubleshooting, is IDENTIFYING the problem. Without knowing what the problem is, how can one fix it?

Strange issue when pausing LONG audiobook--pressing play again changes the

Strange issue when pausing LONG audiobook--pressing play again changes the position within the book--it doesn't start back exactly where it left off.
The audiobook of "Harry Potter and the Half Blood Prince" is between 18 and 19 HOURS long--all as one long track/file.
I've noticed that when I pause while listening and then press play again, it "rewinds" and starts playing portions of the audiobook from about 10 minutes prior--but the time stamp doesn't change. At least this is the time frame from the first "test". Other pauses/plays may result in different time differences.
The first time this happened, I didn't realize what it was doing. I pressed play (from the pause) and I heard a portion that I had already played. I thought that the bookmark just didn't "remember" as it should have, so I scrubbed forward trying to find where I remembered leaving off. If you end up pausing/playing even a couple of times with this happening each time, the portion of the audiobook that you're playing and the time stamp becomes COMPLETELY off! For example, almost an hour into the time stamp was really only about 10-15 minutes into the actual book.
I'm not sure if this makes any sense, but hopefully it does to someone. It's very frustrating to have this happen simply because you had to pause while listening. You have to scrub backwards or forwards each time to find out where you REALLY left off at and the time stamp becomes of no help value since it doesn't change as the playback position moves itself.
I'm sure that this is something happening due to the extreme length of the audio file. That maybe it can't track as precisely as it could with shorter lengths. ???
Any ideas? Has anyone else seen this happen? Any ideas on whether or not there is anything that can be done to prevent this?

I'm glad that I'm not the only one having this
problem. It's ironic that we're both having issues
with the SAME audiobook. I haven't had a chance to
listen to Books 1-5 much to see if they have the same
issue or not--I don't remember any on the few parts
that I've played for my nephews.
Yeah, I know! I was shocked to see that. I recently finished HP5 (twice), and NEVER had this issue, but it is a much smaller file size.
I'm thinking that I may try to convert to AAC before
I try the splitting program--in theory, it's easier
to start right back in again when you only have 1
track to find, than when you have dozens/hundreds of
smaller tracks. It's sometimes hard to remember
which track you left off with--even if it's
"bookmarked" within that track.
I dunno anything about AAC, to be honest. Never used it. My plan is to split the MP3 into smaller MP3s by chapter and load them on a playlist. Of course, I will have to label them all nice and pretty. It is a long book, but you could always just load a couple of chapter files at a time. The only thing that I can see that would be kind of a pain about splitting it with the Cool MP3 is searching thru the file for each chapter and setting break points.
My only concern is how much quality I'm losing by
converting from one compressed format--MP3--to
another compressed format AAC.
Yeah. Ew. No clue. Sounds unpleasant to me. Again, I really do not do anything with AAC.
I suppose, since it's
spoken word instead of music, the change shouldn't be
too noticable. I'm not sure what kind of time frame
it'll require to convert. I'll probably try it with
book 1 first--since it's the smallest.
May depend on the program. The one I got boasts no quality loss. You may wanna scrounge around the download sites and see which one sounds like it has the best features, even if you do just get a free trial version of something. I would definitely read the editor's ratings. I tend to trust that more than the typical end user's. They show how many stars the editor gives a product, and you can click that for the review, or sometimes they have labeled tabs where you can access the review.
As for how long it takes me to rip that particular file and if that actually fixes the scrubbing problem, I will have to let you know tomorrow. WAAAAY past my bedtime!
Keep me updated on your end. I sure which that there
was an explanation for why it happens.
Will do! I am thinking you hit the nail on the head with the length. That was exactly what popped into my mind when I figured out what the goofy thing was doing.
Talk to you later!
HP dv5117d, iTunes 7.0.2.16 Windows XP Pro 1st gen 4GB nano, sw ver 1.3

Dock hiding/magnification issue when using two mice.

Hello. I purchased and installed 10.7 Lion today on a freshly reformatted iMac (2.8 ghz, original aluminum) and I am having a very strange issue with the Dock.
My business setup requires me to use a KVM switch so that I can use my PC and my Mac at the same time. I have two separate monitors, so the display is not handled through this switch. I have one keyboard that is handled through this switch, and one mouse: the Cyborg RAT 7.
I have a second mouse, the Apple Magic Mouse, hooked up to the iMac only through Bluetooth. Because of this setup, I have both the RAT 7 and the Magic Mouse capable of controlling the cursor on OS X when the KVM switch is set to Mac.
However, when both mice are connected the dock becomes completely unusable:
Normally I have the dock Hidden and with Magnification turned on. However, the hiding doesn't work. If I move the cursor to the bottom of the screen, I have to click to get the dock to appear. This "magnifies" the icon that the cursor is over, but nothing else magnifies when I move over it and the dock does not re-hide when the cursor is moved off and will only re-hide once I've clicked elsewhere. When I right click on something in the dock, the options in the right click menu do not highlight like they are supposed to. This highlighting issue applies on the top bar's icons as well.
I have had this glitch happen occasionally on Snow Leopard, and in that case I would simply relaunch Finder and all would be well. This does not fix this issue.
What does fix this issue is removing one of the mice. If I unplug the RAT 7 from the KVM switch, the dock works perfectly using the Magic Mouse. If I turn off the Magic Mouse, the dock works perfectly using the RAT 7. I have tried connecting the RAT 7 directly through USB, bypassing the switch, and I have the same issue.
Is there perhaps an option in Lion that has multi-mouse support turned off somehow? I can move the cursor fine with both mice attached, but the dock is simply unusable with both.
Any information on this strange issue would be most appreciated.
Thank you for your time.

I have just configured a new Airport Extreme and I have just printed sucessfully to our printer. Weird its just a Graphite Airport base Station Issue. I am not sure if the problem occours with the Snow Airport Base Station....Ill have to try that one out. I am so happy that it works you wouldnt believe it.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Files transferred to external HD end up in trash - very strange issue

Hi,
I seem to be having a very strange issue, hopefully somebody can help or has seen this before.
Hardware: MacBook Air, Western Digital Passport external HD, 250gb, formatted NTFS.
Software: OSX 10.7 Lion, Paragon (allows me to write to an NTFS formatted HD)
Issue Summary: I copy something to the external HD; I empty trash; the file I copied is deleted from the external HD. It doesn't happen every time.
I do also seem to have a persistent folder in trash called "WD Sync Data" that won't go away unless I re-delete it as it's also in the root of the drive. Not sure if this is related somehow.
Recently I copied 3 video files inside a folder to the HD, then disconnected the HD. When I reconnected it a while later and noticed that inside the "WD Sync Data" folder in trash were the 3 files I'd copied. I then looked inside the same folder on the root of the drive and the files were there, instead of inside the folder that I'd copied to the drive, which had vanished. If I hadn't noticed and had emptied the trash, those files would've been deleted.
It's definitely happened more than once; last time I actually deleted the files from my computer after copying, then emptied trash, and they were gone from the external HD also.
I've only found one person who seemed to be experiencing a similar problem back in 2010. It sounds similar though it could've been user error: http://www.mac-forums.com/forums/apple-notebooks/188224-weird-external-hard-driv e-trash-problem-help-please.html
Has anyone experienced this or have any suggestions?

Quick update: I ran a verify then a repair in Disk Utility as there were a couple of errors. Hopefully this has solved the issue, however it'd still be interesting to know if anyone's come across this before and what caused it?

A very very strange issue on BlazeDS Deserializing

Hi all,
I run into a very very strange issue on BlazeDS Deserializing. Is there any hint or idea? Thanks a lot!
Scenario 1:
Both the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine.
Actual result:
Everything works fine. All the properties in the Flex Object could be mapped to the Java Class
Scenario 2:
The browser(firefox or IE) and the midtier (BlazeDS ,java) are on the different machine.
Actual result:
Sometimes it works fine.
And most of the time it does not work fine. Only the data in List is mapped correctly. All the values of simple data type such as int are mapped to 0 .
Let me simplify the problem.
The objects of Class B is always stored in the ArrayCollection assocItems of Class A
Flex side:
public class A {
public var id: int;
public var name: String;
public var assocItems: ArrayCollection=new ArrayCollection();
public class B {
public var id: int;
public var assocItems : ArrayCollection=new ArrayCollection();
The id , name in Flex Class A and assocItems in Class B could be deserialize to correct value . But the id of Class B is always mapped to 0. This is not correct.
The log level of BlazeDS is configured to Debug. From the log I can see that each value is passed from Flex side to Java server side correctly.
[BlazeDS][INFO] Channel endpoint my-amf received request.
[BlazeDS][DEBUG] Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/18)
(Array #0)
[0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
However, the Java object does not get the correct value of B.id.
In conclusion,
1. It’s an issue with only default types
2. It does not occur every time
3. It does not occur when the browser(firefox or IE) and the midtier (BlazeDS ,java) are on the same machine
Have you ever run into the similar problems? And what’s your solution?

I checked, when I hard-code the constant in linq, the generated sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ('1062303212007000121' = "Extent1"."AA")
if I pass a variable to the query with same value, the sql is like this:
SELECT "Extent1"."AA" AS "AA"
FROM (SELECT "TBL"."AA" AS "AA"
FROM "USERNAME"."TBL" "TBL") "Extent1"
WHERE ("Extent1"."AA" = '1062303212007000121' /* @p__linq__0 */) (@p__linq__0 is passed as parameter)
The only difference is a paramter. I can't figure out why there is such a impact on performance.

Strange issue when typing a number in Lion

Hi,
I have a very rare issue when I type a number now and since I updated my system to Lion, no matter which program am I using, Safari, textedit, mail, etc. Every time I type a number (just one), it suddently erase itself, doesn't happen when I type more than one, it's very annoying and this didn't happen when I had Snow Leopard.
Any ideas?

…and so on = 58376163294144?
Could you please answer the questions, this is like drawing hens teeth.
I have entered the numbers but since I don't know how your sequence is input I can't do the preceeding numbers to the one that changes.
…which doesn't when I do it in Pages '09 v4.05:
Peter

Strange issue when scaling text

Hi,
I'm using inDesign CS6 and there's a strange issue when rescaling a text with overflow to 200%:
As you can see, the fourth paragraph doesn't change its font size, even if it has exactly the same configuration. This happens apparently randomly to some paragraphs, or even lines of a paragraph in some cases.
The weirdest thing is that I have tried the same action with the same .indd file in other computers (another Mac and a Windows one, both CS6) and it scales properly all paragraphs. So I checked all the preferences from one computer to the other, and even if they are the same, the scaling issue still happens.
Any hints?

See Replace Your Preferences

Very strange issue when using initial context to lookup for beans...

Similar Messages

Maybe you are looking for