Very strange problem, help needed please???

I had a piece of software that acted as a virtual disk when I plugged in my 60GB Video Ipod but when I opened iTunes it appeared as if my iPod was connected with a different name and over 20 GB's used (which is right) but nothing could be seen. After disabling the virtual drive, rebooting and trying again I still had the same problem. I have all my library on my PC so it didn't bother me to try a system restore, I did the system restore but when it was finished it said that my iPod was restored but the wrong name was there and I'm missing 30 GB's. I'm happy to completely wipe it and start again but I've tried the restore twice now and I get the same problem, the capacity has halved??

hiya!
I did the system restore but when it was finished it said that my iPod was restored but the wrong name was there and I'm missing 30 GB's
hmmmm. we'd probably better check on this possibility:
Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
love, b

Similar Messages

Hibernate-very strange problem, help please

Hi, i got such a strange problem that im sure you ll think im doin crazy talk :) , i dont see why this would happen at all, i have a class called "Package", mapped to a table "package". whenever i do a query on this table using hibernate, even the simplest "find all" kinda of query, hibernate does update on the table b4 doin the query! even more weird, it does the update when the first query on this table happens, it deletes all values of a column (yes only this column); then if i do the same query again, no update at all. however if now i mannuall add those missing values, it does the update again and deletes them! sry its confusing, heres my code and more of wat i done:
The mapping Package.hbm.xml
<hibernate-mapping package="tuition.bo">
<class name="Package" table="package">
<id name="id" column="study_package_id" type="long">
<generator class="sequence"/>
</id>
<property name="name" column="name" not-null="true"/>
<property name="satTiming" column="sat_timing" not-null="false"/>
<property name="satSubjects" column="sat_subjects" not-null="false"/>
<property name="sunTiming" column="sun_timing" not-null="false"/>
<property name="sunSubjects" column="sun_subjects" not-null="false"/>
<set name="classes" inverse="true" cascade="delete-orphan" lazy="true">
<key column="package_id"/>
<one-to-many class="Class"/>
</set>
</class>
</hibernate-mapping>
For example initialy i populated database using hibernate, like this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 9-12 business 9-12 law
2 no.2 9-11 business 9-11 law
Then after i populated this database, i did this query:
List res=getHibernateTemplate().find("FROM Package");
and you can see the log file as such: (excerpt)
16:23:06,687 INFO TransactionFactoryFactory:31 - Using default transaction strategy (direct JDBC transactions)
16:23:06,703 INFO TransactionManagerLookupFactory:33 - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
16:23:09,968 DEBUG JDBCTransaction:46 - begin
16:23:09,968 DEBUG JDBCTransaction:50 - current autocommit status: true
16:23:09,968 DEBUG JDBCTransaction:52 - disabling autocommit
16:23:10,640 DEBUG SQL:324 - select studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, ....... from _3AT_package studypacka0_
Hibernate: select studypacka0_.study_package_id as study1_, studypacka0_.name as name12_, studypacka0_.description as descript3_12_, studypacka0_.day as day12_, studypacka0_.sat_timing as sat5_12_, studypacka0_.sat_subjects as sat6_12_, .......
16:23:10,734 DEBUG JDBCTransaction:83 - commit
16:23:10,796 DEBUG SQL:324 - update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
16:23:10,812 DEBUG SQL:324 - update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
Hibernate: update _3AT_package set name=?, description=?, day=?, sat_timing=?, sat_subjects=?, sat_hours=?, sun_timing=?, sun_subjects=?, sun_hours=?, unit_price=?, years_id=?, group_id=? where study_package_id=?
16:23:10,812 DEBUG SQL:324 - update _3AT_package set name=?, description=?,
16:23:10,953 DEBUG JDBCTransaction:173 - re-enabling autocommit
16:23:10,953 DEBUG JDBCTransaction:96 - committed JDBC Connection
as you can see, it does update and changed table field values to this:
package_id, name, sat_timing, sat_subjects, sun_timing, sun_subjects
1 no.1 business law
2 no.2 business law
---------- all tiimings are gone. and now if i re-do the same query, there are NO UPDATE operations....howver if i add some values to sat_timing, sun_timing, and re-do the query, very surprisingly, i saw those update operations which delete all timing values again!
im totally lost... i havent changed any config, this doenst happen to my other classes at all but just this one.... any ideas please! even some thought of what may caused this would be great help! thank you!

well i got the setters wrong.... being so stupid i am... sry for creating such a long and massy thread.

Very Strange problem!! Please help me!!!!!!

Okay, my sister has a Pink ipod Nano 2nd gen, 4gb.
It has worked well since December 2006, but this week has begun messing up!
Last night it froze up. The *Clicker noise* heard when scrolling through menus etc. was playing uncontrollably when not even touching the touch wheel!
I had to reset the ipod, hate doing that by the way.
2nd. Now, the iPod will turn on, go straight to the last song played, and won't respond, the only way to get it to stop is by resetting it!
I NEED HELP! please help me!!!!!!

She can just re-sync her stuff back onto it and see if it now acts normally. If you still get the funky click wheel behavior, then she may have an actual hardware problem like a sticking contact and it would either have to be repaired (probably not worth it) or replaced.
Patrick

Multiple problems - help needed please

I've got so many problems that I've completely confused myself. So, if anyone can help….
I was previously using a D-Link D-320T DSL modem on BT Broadband in the UK. The modem was set up in bridge mode, and hooked up via ethernet to my Airport Extreme (n). The AEBS would use PPPoE and successfully connected to the internet, as well as handling all my network needs.
Everything worked and everything was fine, allowing screen sharing and file sharing between my Mac Mini, MacBook and MacBook Pro.
Earlier this week, the internet connection dropped and I couldn't find the cause. Resetting the router and hooking it up directly to my Mac Mini, I connected to it (192.168.1.1) and had it connect to the internet itself.
It did so, and distributed IP addresses to the Mac Mini…but after 30 seconds my internet connection dropped, and looking in network preferences, I found that the modem had jumped from a router address of 192.168.1.1, to an 82.xx.xx.xx address, which was clearly the public IP address forwarded by my ISP. So it seemed like it was working in a sort of bridge mode still.
I reset the router numerous times, tried switching it into full bridge mode etc, but the AEBS was unable to use it to connect via PPPoE as before, because the D-Link would play nice for 30 seconds, then jump around with addresses.
Very strange, but I assumed the modem was just broken.
I dug out my spare router, being the Netgear DG632.
I managed to get this hooked up to the internet really quickly, and using an ethernet connection to the Mac Mini, it all appeared fine. However, as I started looking around the internet, I noticed that although google.com would open up, any subsequent links, and indeed any other domains I tried to visit would not open.
Resetting the router seemed to solve this.
I then hooked up my AEBS to the Netgear and, after pondering which way to use it, I found the only way I could get it to play nice was to have the AEBS in bridge mode itself, meaning that the Netgear would do all the routing work.
The MacBook connected to the airport, and all seemed okay….
…However, I then noticed that the internet connection would randomly drop. Web pages would not open (in any browser), and downloads which were under way could be seen in the Safari download manager to suddenly crash.
The same was true on the Mac Mini - web browsing stopped at random. I had however hooked this up to the airport via an ethernet cable, I noticed that, although the "internet" wasn't working, other connections like torrents were still active.
Reconnecting the Netgear router directly to the Mac Mini allowed me to see in its diagnostics that it still held a connection to the ISP and still had an external IP address.
Again, a reset of the router seemed to resolve things….but only for a few hours. And whilst the Mac Mini seemed resilient, the airport connection to the MacBook was terrible. (I haven't even tried using the MBP yet).
Furthermore, I noticed that networking between devices had severely been crippled. Although the Mac Mini and MacBook were visible to each other in the shared devices section of finder, clicking the link meant waiting literally four minutes for a connection to establish, and screen sharing timed out, from either direction.
I then tried assigning everything static IP addresses, but this seemed to confuse matters with the router.
Under the impression that the Netgear clearly couldn't handle the job of routing my network, I tried to set it up in bridge mode and use the AEBS as before.
Reading around the internet (on my iPhone at this stage), I realised there was no obvious "bridge mode" option, but I was told to set the device mode as router, and then say "no" when it asks if there are any login details for the ISP (under Basic Router Settings). This was done.
However, setting up the AEBS with PPPoE had no success, and the connection was never made.
At this stage, I'm living with a crippled network and two routers, neither of which do what I want.
Can anybody advise me on a solution to fix either router/modem?
I want to use the modem in bridge mode and have the AEBS handle everything as before, as it was perfect.
At this stage, which a frazzled brain (after messing with everything for several hours), something step-by-step would be great.
Help! (and thanks)

I have also recently developed problems with my airport network. I was playing my air tunes when it started freezing so i reset my airport extreme and expresses. When I tried to setup my networks again I en counted problems like airport utility couldn't find the extreme base station or when it did it couldn't read the setting. I eventually managed to create a network then when i tried to connect to the network it either asks for the password (even though its saved in keychain) When I enter the password it keeps saying "connection time out". I then turn airpot off & on and it the sometimes reconnects automatically without requiring a password.
My internet then will sometime start working again but then drop out completely or take an age to load.
The network will then sometimes disappear from the network list and I'm unable to see it at all.
No matter how many time i reset the base station it doesn't make a difference.
I my broadband modem is also a wireless router and Im experiencing similar problems with that. I took my laptop to work and tried to connect to the network at work and it seems to work ok except it did ask for a password the time out but did it only once.
I did download a security update recently but im not sure if its that that is causing it
please help me as well as I'm stuck without my network

Basic java problem help needed please

the problem is :
to produce a program which will show membership rates for a golf club..
membership yearly rate new member joining fee
category
full 650 3000
associate 200
ladies 350 2000
under 18 175
new members must pay a joining fee in addition to the yearly rate as shown
full/ladies members also prepay 150
write a program which will enter details of members,calculate and output the total amount each member should pay.
output number of members in each category
the total income for each category....
i need this program to show each category individually...cant do it at all..been at it a week....must be me && and || signs...i think...plz can someone help me as im really stuck now...thank you so much..
import java.util.Scanner;
public class assignmentquestion3 {
public static Scanner key=new Scanner(System.in);
public static void main(String []args){
int fullfee=800,newfullfee=3800,associatefee=200,newla diesfee= 2350,ladiesfee= 350,under18fee = 175;
int selectcat=0;
int reply = 0;
int addmember=0;
int currentfulltotalmem=0,newfulltotalmem=0,associatet otalmem=0,ladiestotalmem=0,under18totalmem=0;
int assoctotalcash=0,ladiestotalcash=0,under18totalcas h=0;
int fullprepay=150;
int ladiesfull=2500;
int completefull = 0;
int ladiescurrent=500;
int under18=175;
//Main introduction screen for the user and selections available. do while loops only allowing numbers 1,2,3 or 4.
do{
do{
System.out.printf("\n\t %90s","********************Membership Rates For The Golf Club********************");
System.out.printf("\n\n %105s","This program will allow users to enter details of members as well as calculating and.");
System.out.printf("\n%106s","outputing the total amount each member should pay. The program allows users to view the");
System.out.printf("\n%106s","total number of members in each category and the total income for each category.");
System.out.printf("\n\n\t %75s","Please select your membership category: ");
System.out.printf("\n\n\t %68s","Please press '1' for FULL");
System.out.printf("\n\n\t %68s","Please press '2' for ASSOCIATE");
System.out.printf("\n\n\t %68s","Please press '3' for LADIES");
System.out.printf("\n\n\t %68s","Please press '4' for UNDER 18");
System.out.printf("\n\n\t %68s","Please enter 1,2,3 or 4: ");
selectcat=key.nextInt();
}while (selectcat>4 || selectcat<1);
do{
System.out.printf("\n\n\t %75s","Are you a Current Member (press 1) or a New Member (press 2): ");
reply=key.nextInt();
}while (reply<1 || reply>2);
//if number '1' for 'FULL' category is selected by the user and reply is 'yes'(1) then new full member fee is shown to user
if (selectcat==1 ||reply==1)
System.out.printf("\n\n\t %68s","CURRENT FULL MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Current full membership fees yearly are "+fullfee+"");
System.out.printf("\n\n\t %68s","Full members must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %72s","The total of this membership is: "+fullfee+"");
currentfulltotalmem=currentfulltotalmem+1;
System.out.printf("\n\n\t %72s","The total number of 'CURRENT FULL MEMBERSHIPS = "+currentfulltotalmem+"");
completefull=completefull+fullfee;
System.out.printf("\n\n\t %68s","The total amount of income for 'FULL MEMBERSHIPS' within the club = "+completefull+"");
//if number '1' is selected by the user and reply is 'no' (2) then full member fee is shown to user
else if (selectcat==1 &&reply==2)
System.out.printf("\n\n\t %68s","NEW FULL MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Full membership fees yearly are "+newfullfee+"");
newfulltotalmem=newfulltotalmem+1;
System.out.printf("\n\n\t %68s","The total number of 'NEW FULL MEMBERSHIPS = "+newfulltotalmem+"");
completefull=completefull+newfullfee;
System.out.printf("\n\n\t %68s","The total amount of income for 'FULL MEMBERSHIPS' within the club = "+completefull+"");
//if number '2' is selected by the user then associate member fee is shown to user
if (selectcat==2 &&(reply==1 || reply==2))
System.out.printf("\n\n\t %75s","ASSOCIATE MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %75s","ASSOCIATE membership fees yearly are "+associatefee+"");
associatetotalmem=associatetotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'ASSOCIATE MEMBERSHIPS' WITHIN THE CLUB = "+associatetotalmem+"");
assoctotalcash=assoctotalcash+associatefee;
System.out.printf("\n\n\t %68s","The total amount of income for 'ASSOCIATE MEMBERSHIPS' within the club = "+assoctotalcash+"");
//if number '3' is selected by the user and reply is 'yes' then new ladies member fee is shown to user
if (selectcat==3 &&reply==1)
System.out.printf("\n\n\t %68s","LADIES CURRENT MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","Ladies full membership fees yearly are "+ladiesfee+"");
System.out.printf("\n\n\t %68s","Ladies must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %68s","The total of this membership is: "+ladiescurrent+"");
ladiestotalmem=ladiestotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'LADIES MEMBERSHIPS' WITHIN THE CLUB = "+ladiestotalmem+"");
ladiestotalcash=ladiestotalcash+ladiescurrent;
System.out.printf("\n\n\t %68s","The total amount of income for 'LADIES MEMBERSHIPS' within the club = "+ladiestotalcash+"");
//if number '3' is selected by the user and reply is 'no' then the current ladies member fee is shown to user
else
if (selectcat==3 && reply==2)
System.out.printf("\n\n\t %68s","LADIES NEW MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %68s","LADIES NEW MEMBERSHIP fees yearly are "+newladiesfee+"");
System.out.printf("\n\n\t %68s","Ladies must also pre-pay "+fullprepay+" on a card can be used in the club facilities such as bar and shop ");
System.out.printf("\n\n\t %68s","The total of this membership is: "+ladiesfull+"");
ladiestotalmem=ladiestotalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'LADIES MEMBERSHIPS' within the club = "+ladiestotalmem+"");
ladiestotalcash=ladiestotalcash+ladiesfull;
System.out.printf("\n\n\t %68s","The total amount of income for 'LADIES MEMBERSHIPS' within the club = "+ladiestotalcash+"");
//if number '4' is selected by the user then under 18 member fee is shown to user
else if (selectcat==4 &&(reply==1||reply==2))
System.out.printf("\n\n\t %75s","UNDER 18 MEMBERSHIP SELECTED");
System.out.printf("\n\n\t %75s","UNDER 18 yearly membership fees are "+under18fee+"");}
System.out.printf("\n\n\t %68s","The total of this membership is: "+under18+"");
under18totalmem=under18totalmem+1;
System.out.printf("\n\n\t %75s","The total number of 'UNDER 18 MEMBERSHIPS' within the club = "+under18totalmem+"");
under18totalcash=under18totalcash+under18;
System.out.printf("\n\n\t %68s","The total amount of income for 'UNDER 18 MEMBERSHIPS' within the club = "+under18totalcash+"");
//allowing user to select '0' to add another member or any other key to exit program
System.out.printf("\n\n\t %68s","Please Press '0' to add another member or any other key to exit.: ");
addmember=key.nextInt();
}while (addmember==0 ||addmember>1);}}
the problem im having is whenever i make the choices 1,2,3,4 (CATEgorys) AND hit 1 or 2(current or new member selections) it brings up more than one category...
for example when i hit 1(Category full) and 1(current member)..it displays this:
Are you a Current Member (press 1) or a New Member (press 2): 1
CURRENT FULL MEMBERSHIP SELECTED
Current full membership fees yearly are 800
Full members must also pre-pay 150 on a card can be used in the club facilities such as bar and shop
The total of this membership is: 800
The total number of 'CURRENT FULL MEMBERSHIPS = 1
The total amount of income for 'FULL MEMBERSHIPS' within the club = 800
The total of this membership is: 175
The total number of 'UNDER 18 MEMBERSHIPS' within the club = 1
The total amount of income for 'UNDER 18 MEMBERSHIPS' within the club = 175
Please Press '0' to add another member or any other key to exit.:
under 18 membership as well?...does this for other selections too...is it my arithmetic operators?....my if loops?...

Multi-post [http://forums.sun.com/thread.jspa?threadID=5346248&messageID=10498270#10498270]
And it still doesn't compile.

Metadata problem - help needed please

A rather strange thing has happened when opening Lightroom a few moments ago and before I go and do something stupid would request some advice.
I have a folder open containing approx 800 CR2 RAW image. The thumbnails for these images display the small icons indicating that I have applied keywords, edits and in some cases crops.
However, the thumbnails also display the question mark and when clicked upon I receive the following 'the following files relating to this photo were present before but are now missing' and in the box below it indicates that the xmp file(s) are missing. What's strange is that I have never written out to xmp files in this folder and so they were never there to be missing in the first place.
Now the options I have are to (a) forget about them but as there was nothing to forget this seems irrelevant or (b) to continue to track them but again, as there aren't any xmp files there aren't obviously any to track.
I had thought that up until this point in time all my edits and crops etc were contained within the database file and if this is so why the question mark. The options I seem to have are from the menu bar to 'Read Metadata from file' but because there aren't any xmp files associated with these images doing so results in the loss of my edits, and secondly, if I choose the 'Write Metadata to File' I end up with xmp files that I do not want or need.
Has anyone any reasonable suggestion as to why these question marks should be appearing above all the folders images (800) when the edits etc have clearly been written to the database. Yesterday no question marks today all this folders images show them so what if anything can I do about it?

Thanks Lee and if only the answer were so simple. No - none of the files have been moved or deleted outside of Lightroom because if that were the case then I would have no files at all showing in this particular LR folder as ALL 800 images have suddenly and mysteriously had the question mark attached to them.
As I mentioned earlier, when moving the mouse over the question mark itself it brings up the message relating to missing xmp files for which NON were every generated.
Anyway, the problem is in the past now as I have labour intensively gone through 800 images first clicking on the question mark and then choosing the option to ignore the xmp file as there aren't any xmp files to ignore anyway, Now the right wrist is aching somewhat. :-( The task would have been made much easier if there was an option within LR to apply the 'Ignore xmp files' to ALL selected images but of course there isn't one. User request coming up me thinks.
Never before has one application given me so much joy and so much grief. :-) :-(

Very Very Strange Problem - Help

I own a MacBook Pro 17 inch. I connect it to a 30" Cinema Display. It has been working great for the past 6 months. Few days ago, I was doing a presentation using a flat screen which went fine. A day later, When I tried to connect the MacBook pro back to my cinema display, it just did not work. The display is not detected at all. I first thought maybe the connector was not damaged but the dosplay worked fine with another computer. I then though maybe the diplay out in my computer was damaged, but my MacBook works ok wiht other screens and projectors. The strange thing is that there is absoultely no communicatio between this specifc Macbook pro and this 30" inch Cinema display. Very strnage. Appreciate your help.

Try resetting PRAM…
http://docs.info.apple.com/article.html?artnum=2238

I have very strange problem with Iphone 3gs. Whenever it gets little hot or exposed to 30 degree temperature it losses signals (No service). Whenever it is cooled down the service is back. Please help!

I have very strange problem with iphone 3gs. Whenever it gets little hot or exposed to 30 degree or above temperature it losses signals (No service). Whenever it is cooled down the service is back. Whenever I am using Skype or playing game for a while it losses carrier signals and wifi. When it is cooled down afer shutting down the carrier signals and wifi are back. It is for sure problem is with heating, but 30 degree tempeature in Oman is normal and some time it goes upto 50 degrees. I have noticed this has started after I started using substandard charger as I lost my original charger of the phone. Please help!! Thanx.

The specifications define an operating range up to 35 degrees.

A very Strange Problem!!!help me!!

i encounter a very strange problem, in EJB
i write two EJB, one Stateless Session called A, and one Entity called B.
i want to call B's findByPrimaryKey method in one A's Business, but failed!!!
but when i remove the statement that performed the findByPrimaryKey method to A's setSessionContext method, It's Success!!!!!
what the Problem, i am useing the Borland 's AppServer.
who can help

how u create the entity bean B from A?
using proper lookup?
can u try by write a small function inside bean A
that contain proper lookup to Bean B...
then try to call finbyPrimaryKey...
now tell me is it working?
or else can u give code or clear idea..
if i can help u ,,,, sure i will
do mail me
[email protected]

ALV Grid - Very Strange Problem

I am facing a very strange problem in ALV Grid. Ours is a ECC5 system on SAP_APPL SAPKH50011 and SAP_BASIS SAPKB64016.
I have implemented the ALV grid in a screen using classes. This grid by default appears in display mode however it can be switched to change mode and back to display mode using a custom button on the ALV toolbar. When the user clicks the change button the grid appears in editable mode. During the back and forth switching of the ALV between Change/Display modes the ALV grid control is not destroyed however the toolbar, fieldcatalog and ALV contents are refreshed.
The data which is entered in an editable cell is validated using the data_changed event which has been implemented locally. If the validation fails an error message is raised using the message statement which is being issued correctly. Now when I correct the data and then click on another cell in the ALV grid the program is being aborted. Any clue why this is happening??

Please check this code
In the PBO of the screen set the field catalog and layout , i think this will help not to refresh the field catalog every time swtich between display and change mode
    set titlebar sy-dynnr with p_netwk.
    call method g_grid->set_frontend_fieldcatalog
      exporting
        it_fieldcatalog = gt_fieldcat[].
    call method g_grid->set_frontend_layout
      exporting
        is_layout = gs_layout.
    call method g_grid->refresh_table_display.
2. Regarding program abort, please paste the first page of system dump
a®

Very strange problem facing

Hello All,
I am facing very strange problem from last a week.
I have made flex application using Flex3 and AMFphp.
I was running very fine but just from before 7 days, my all images will not displayed in Mozilla Firefox browser.
but it is running fine in Internet Explorer browser.
any idea? I have tried to know what happen but i failed.
Please help me to identify what's going wrong.
Thank you.

Have you tried emptying your cache?
Dany

Very strange problem / Perpetual command key

I've been using OS X since its inception, and have never had this problem before.
Starting yesterday, I noticed a very strange problem that was happening randomly. When I clicked on an app in the dock, it would just reveal the app to me in Finder rather than opening it. Other problems including multiple selections when single-clicking on items with my mouse, and not being able to type. After some fidgeting, I realized that my iMac is acting like I'm always holding down the command (apple) key. If I have a window open, for instance, pressing the H (just by itself) key will hide the window. Pressing Q will quit whatever is active.
I shut down, restarted, plugged in a different keyboard, used a different mouse, unplugged all my periphs, deleted all haxies and their attached files, and it still happened. I unplugged my 2nd monitor, and that seemed to fix it after another restart... but then I plugged in my 2nd monitor again and restarted, and now everything is fine. It's just happening randomly. I'm afraid to restart my Mac now. This is really bizarre!!!
Someone please help!

If it's any help, it started right after the following:
When booted to Vista one night, I noticed ghosting on my nice new iMac screen which kinda irked me. I could see the menubar with the Spotlight menu icon burned into the screen.
So when I got back into OS X I looked for a menubar hider. I tried Menushade and Menufela, both of which are quite old... probably before any mention of an Intel switch had ever occurred.
But now I had a problem... no clock. So I went ahead and downloaded Yahoo! Widget Engine (aka Konfabulator). I know, I know... what a crazy workaround just to hide the menubar (this is why it would be GREAT if Apple would build in its own menubar hider option!)
Anyway, this stuff started happening, so I deleted all of those apps (Menufela, Menushade, and Yahoo Widget Engine) with AppZapper (a great little app).
Ugh... this is what you get for experimenting with homegrown apps, I guess.
Anyway, hope that helps.

Nokia 3250:A very strange problem...

hi..i'm facing a very strange problem in my handset 3250.. i've upgraded its os but still there is problem: http://discussions.europe.nokia.com/discussions/board/message?board.id=smartphones&;message.id=9102#M9102 any idea about such type of problem.....

MR.,
what is firmware?? How can i have its latest edition??
Can you help me because i too have the same problem:
Problem 1:
1-I install any software (e.g:snake game) through Application manager (Pc Suit) in memory card.
2-I launch that software (snake game) just after installation it works properly.
3-Now i switch-off the hand set and than switch-on it.
4-I try to launch that software (snake game) again but it doesn't response.
Problem 2:
1:There is a image in my Memory card.
2: I set that image as a wallpaper.
3-Now i switch-off the hand set and than switch-on it.
4-Wallpaper reset to default one.
Problem 3:
1-I install a theme through Application manager (Pc Suit) in memory card.
2: I apply that theme in my hand set.
3-Now i switch-off the hand set and than switch-on it.
4- Now theme reset to default one.

Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918

Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808

Very strange problem, help needed please???

Similar Messages

Maybe you are looking for