VI front panel does not pop up in teststand

HI,
I am new to teststand and would like to seek helps on my application.
I have a sequence file consists of several steps. in the SETUP, I have a step to acquire input from the user on which test to run. Having said that, when i run the sequence, i do not see the checkbox test pop up automatically. How do i configure it to pop up the VI automatically.
Also, How do we control the sequence if the user select 3 test cases? using (if) flow control in teststand?
Please advise.
Regards,
Alfred Tan
Attachments:
checkbox test.vi ‏7 KB
NH3 teststand.seq ‏19 KB
Turn on Port 1.vi ‏38 KB

Hi HansWi,
Sorry for the late reply.
Thanks for the VI pop up solution. Now the VI can pop up when i call the VI.
I am using "case" in teststand, I still have error message when i run the sequence. Also, The sequece does not follow the checkbox value that checked by the user.
Please advise.
Attachments:
teststand case.zip ‏196 KB

Similar Messages

  • When the screen saver turns off my front panel does not refresh.

    when the screen saver turns off my front panel does not refresh. If I use the show desktop button sometimes I can not maximize my vi by just clicking on it from the start bar.

    I utilize both a screen saver and the show desktop feature but have never seen this problem in the past. You might play around with your screen saver settings to see if they have any affect. You might also try another computer just to make sure something larger scale isn't going on. Also, testing with other programs to make sure it isn't a general OS issue is always a good idea. Other possibilities include changing your Video Driver settings, updating your video driver, and uninstalling - reinstalling.

  • Programmatically resizing Front Panel does not repaint

    I am trying to extend the width of a front panel at run time when a user hits a button. The problem is
    that the contents of the newly exposed front panel section are not redrawn. I have to either drag
    another window over that section or minimize-maximize it to get it to repaint.
    My issue is how can I get the front panel to refresh/repaint, or if that is not possible what other
    ways are there to do resizing. I have tried changing the "Window Bounds" and "Panel Bounds" properties of
    the VI (not at the same time) as well as using LVWUtil32 (Windows API Function Utilities (32-bit) for
    LabVIEW). Each of these methods results in the same problem.
    Thanks for the help!
    Naveen

    HI Naveen,
    It seems to me that you are having Problem with your Graphics Hardware, rather than labview. Generally the window should be repainted by system.
    If you go to Display Properties -> Settings -> Advanced -> Troubleshooting or Graphic Acceleration - You may see the slider to full Acceleration. Under this setting the OS basically relegates most graphic duties to Graphic Hardware.
    What you may want to do is to Move the slider a couple of notches back. And then try your VI's. Infact try all the settings on your Slider. See if it works at No Acceleration.
    The Problem for me is I do not Have this Problem and cannot even simulate it to try a solution.
    Another Solution is this -
    There is a vi Property Class called "Front Panel" Which can be access
    ed from Vi Server. Under this Class you will see a Property "Defer Front Panel Update" Generally this Property is used to Prevent a redraw. But if this Property is set to False, Labview immediately redraws the Panel.
    What you may want to do is after resizing to let you program go through this Property Node set to False and See if this Helps.
    By The way, the way you have to wire this Property is to Open a Vi Ref, Wire it to Property Node, Select Property as "Front Panel". Right Click on "Front Panel" and Click on Create-> Property -> Defer Front Panel Update. Wire the Referneces of the these Objects, with the output of "Front Panel" going to "Defer FP Update".
    I hope your ver of Labview has these Properties. I am Using 6.1
    I hope you can take it from there!!
    Please advise How you solved the Problem. Good Luck!!
    Mache
    Another Solution which you can try is this
    Good Luck!
    Mache

  • Messages window does not pop up when a chat is received

    Help!
    In the Messages app, when a chat is received, the Messages window does not pop up!  (Like it did with the old ichat.)  When a chat is received, it makes the noise, the icon bounces in the dock, and a red bubble is on the icon with the number of new chats.... but the messages window does not come forward.  This is the most frustrating thing ever!  I've been missing so many chats because I'm not staring at my dock.  How do I make the messages window pop up when a chat is received??  Please help!! 
    (I just upgraded from Lion to Mountain Lion...lost ichat, gained the Messages app, and this issue is driving me nuts!) 

    Hi,
    I am not sure you can.
    By Default  iChat could "Hide" any window such as a Buddy list.
    A new Invite put up a Invite window first that you had to Accept (Or set Auto Accept).
    This triggered the appearance of the Chat window.
    This does not happen in Messages.
    There is not Invite window now to any Form of Text chat invite.
    As a consequence there is no Trigger for the Chat window.
    Add to that the Messages main Window is an interface window as well as the Chat window.
    This puts it in the same category as  Buddy List which has to be called back (unhidden) into view with either Keystrokes or the Window Menu.
    A click (or possibly two to first bring Messages to the Front) on the DOCK icon also tends to reveal the Messages window.
    You can set the Messages > Preferences > Alerts for New Messages and Text Chat invitation to Bounce the DOCK and Play sounds to help.
    10:48 PM      Saturday; April 20, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    Good day!
    What is "place" supposed to mean – open, place as Smart Object, …?
    What are the image’s Color Mode and bit depth?
    Could you please post a screenshot with the pertinent Panels visible?
    Does Window > Adjustments not raise the Adjustments Panel?
    Regards,
    Pfaffenbichler

  • Beware: icloud control panel DOES NOT WORK for icloud email

    Opposing evidence is welcome. Please comment.
    After dozens of hours, emails and chat sessions with both MS and Apple tech support (the latter escalated as high as it could go - "after this we have to refer you to engineering"), I was finally told by Apple Senior Advisor Ciara Ferguson that icloud control panel does not properly sync icloud mail with Outlook 365 (Outlook 2013).  After several months of working on dual systems I discovered that many (but not all) changes to folder names and filing of emails in various folders made in Outlook were not reflected on icloud and vice versa.   Ms. Ferguson has stated that icloud control panel "works better with calendar and contacts."  Obviously, this non-committal statement is grossly insufficient.  It either works or it doesn't.  It doesn't. 
    Allegedly, icloud control panel does work to sync other email (the example of an outlook.com email address was given) into apple devices.  This doesn't sound right to me either, since one can just add any POP or IMAP or Exchange account into a Mac device, so why would one need icloud control panel to interface?
    I remain stymied as to the actual purpose of icloud control panel, despite asking exactly that question of Ms. Ferguson on several occasions.  The Apple literature and its own setup screens suggest that it will sync email, contacts, calendar and notes with MS Outlook, but as to email, that is apparently untrue.

    I don't think so.  I'd like to sync photostream from two iPhones with distinct Apple IDs on our PCs and I don't see a way to do it.  It synced my wife's iPhone while she was logged in to iCloud control panel but not mine until I logged in (and disconnected her photostream PC syncing).

  • I am not able to email a file from Adobe Reader. When I click to share the file, the option does not pop up to share (via Mail, Message, Air Drop, etc.).

    I am not able to email a file from Adobe Reader. When I click the button to share a file, there is no option for route from which to share (Message, Mail, Air Drop, etc. does not pop up).

    What version of Reader and OS X?

  • User POV does not pop up from Report in task list

    Hello,
    I've created a report within Related Content in HFM and added it to a task list--the problem I'm experiencing is when I run the report the User POV does not pop up, rather it simply uses the default POV (ie, whatever is set up in data grids or process management)--this happens if I try to run it directly from Related Content or from the task list. My preferences within Financial Reporting have already been updated to 'On' to preview the User POV and if I run the report from Financial Reporting (ie, Explore) the User POV works fine--so, it seems like adding a report to Related Content disables the User POV from popping up. I'm running on Financial Reporting v11.1.2.1 and HFM v11.1.2.1.104.3701. I can't find anything about it within this forum, knowledge base or as a known issue in the ReadMe for the .104 patch set for HFM.
    Can anybody fill me in on if this is functionality by design or a defect?
    Best regards,
    Jason Call

    Financial Reports do not work as you might expect when they are used as a related content item. As you already have realized, you will not be able to adjust the FR POV items from inside of HFM.
    A 'work around' would be to link to the report and put that link in the Tasklist. This will then open the report 'normally' and you will get the POV functionality that you expect.
    To find the link to a report, open the report's properties and look at the 'smartcut' value. (That is a URL directly to the report)

  • TS4425 How can i do when the latest iCloud Terms & Condition does not pop up?

    When I go to photo stream on my appletv, it says "unable to sign in The icloud terms of service have changed. For more info, go to http://www.apple.com/support/icloud".
    I have tried this resolution on my iphone and ipad already:
    On your iOS device, tap Settings > iCloud.
    Note: Verify that this is the same Apple ID you are using on the Apple TV.
    After a moment, the latest iCloud Terms & Conditions will load.
    Unfortunately, it does not pop up the icloud terms and condition for me to accept.
    Anyone can help me?
    Thanks all~

    Caused by the Ask Toolbar extension in Firefox 3.6.13, disable that extension or un-install it.

  • My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
    For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
    What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
    Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

  • Panel does not start automatically in Gnome 2.24.3

    Since Gnome 2.24.3, the Gnome Panel does not start automatically.
    I had to manualy add it to the startup group via "Sessions" in order to force it to start when login finishes.
    Does anybody has the same behavior?
    Should I report it as a bug?

    That may be true but it is a real pain since when it happens the only way to recover is to terminate all of the iTunes modules with task manager and start it manually. It also leaves the IPOD in a state that says do not disconnect. You can disconnect since nothing is really happening but there is no excuse for this not to start much faster. When you have multiple users it is a real pain. It ought to be able to either end when finished or better yet allow multiple users simultaneously updating from different libraries.
    I guess i will just have to get in the habit of treating it as a single user and start and stop it every time I need it and be suer not to let it run. Not nice because that means waiting for larger Podcast downloads instead of having there ready for me when I sign on my computer.

  • The graphic HTML signature panel does not appear in my Mac mail

    The graphic HTML signature panel does not appear in my Mac mail. I have inserted the signature after reading on the forum. But the images do not download - the rest of the text in the signature is in place - just the logo and the baseline which is a graphic file does not download.  Please help.

    Hi, are the pics at a remote location, or on your Mac?
    Have you tried drag & dropping the graphics on the signature window?

  • CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect.  The separate menu panel does not appear either

    My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect.  The separate menu panel does not appear either.  Help with this?

    BINGO !!!!
    Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
    All the video tests passed with flying colors.
    The sniffer rename trick fixed the problem.
    Thank goodness for the internet!

  • I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

    I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

    It actually sounds like the warp text window is opening off screen.
    Resetting the photoshop elements 10 preferences should fix it.
    *Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
    *Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
    *Press Yes

  • Extract panel does not show in Dreamweaver CC 2014 - using Mac - Why?

    It is odd - as I used the Extract workspace, the Extract panel does not show - not even if I try opening it via Window -> Extract.
    I have updated my Dreamweaver 2014 to the most recent version.
    Can anyone help me?

    Good to know that your issue has been resolved.
    To further investigate why that issue happened we would need some more information from you.
    Please tell us more about the settings of DW before applying patch
    > Which workspace you were working before applying the patch ?
    > What all panels were ON before applying the patch ?
    > Did you perform any specific steps before applying the patch ?
    > What is the version of your Mac ?
    > Any extensions of DW installed?
    Thanks,
    Lalita

Maybe you are looking for