VI on LabVIEW real-time is loading and running a DLL which has been deleted from the machine

OK, this is a weird one (at least, to me :-) )
I have a small real-time demo application VI that I am writing, using some new VIs I just created. My new VIs are wrapper functions for a DLL, using Call Library Function Nodes.
In the process of debugging, I decided to delete the DLL and run without it, to confirm that I am actually loading and using the DLL (since it seemed to have stopped doing something it had successfully done just a little while earlier).
The VIs that use that DLL still run, and at least some of them actually do what they are supposed to do. But the DLL does not exist on the real time machine! Not only did I delete it, reboot the machine, and check that it was gone, but through my ftp program I searched the whole hard drive for that DLL and did not find it (the search succeeded in finding a different DLL which did exist on the system, so the search-via-ftp is working).
How could this happen? What am I missing? Could this somehow be the result of a corrupted VI or is there some more logical explanation for the phenomenon?
Thank you.
Batya

Nathan is right at least for the Phrlap ETS based RT systems. For VxWorks you have to (or maybe used to have) to download the shared library to the controller before you could deploy an executable that makes use of them. For Pharlap ETS systems if you deploy a VI library dynamically to a machine it will download everything including shared libraries to the the RT target memory and run it from there. Only if you create an executabel and "install" it to the target and run it from there will it use whatever VIs are in the executable and also use the shared libraries that have been installed onto that system (at least for Pharlap ETS RT targets. As mentioned before for VxWorks targets, the deploy process even for executable installation did for some reasons not take care about moving the according *.out library to the target together with the rtexe).
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphone

You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

I took some video on my Iphone and uploaded it ot Iphoto - now I Cant locate the video and it has been deleted from the iphone?

Thats pretty much it.
Took the video less just over a week ago, subsequent videos and pics have been uploaded without issue and are easy to locate.
Just cant find the couple of videos from that day.
Cheers
MCJ

I agree with LowLister, the best option for you to share the video online is to upload it to your online storage account for example : Box, Dropbox, SkyDrive (All of them provide free storage beginning from 2GB).
You can upload the files which you want to share in this online storage and then they have sharing options in which you'll will get the link of the file to be sent and send the email. You're good to go!
Tip : You can store multiple files for backup purposes.

Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed

HI,
I am using V11.1.2.2 Hyperion Planning. I am currently getting an error:
Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed
This is what i got when i tried to add alternate hierarchy to my shared dimension. I tried to delete it and it messed up.
NOw it wont deploy my application.
Can any one suggest.
Thanks in advance
Cheers,
XXX

EPMA!!!!! EPMA!!!!
I'm playing around with it to write a blog post and it is crazy. Only possible workaround (till now i'm not able to figure out a solution to it) is to copy the application and deploy it as a new one. Take copy of all objects (forms, tasklist etc). Delete the corrupted application and rename the new one to old.
Regards
Celvin
http://www.orahyplabs.com

My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.

My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.

Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I want to search Time Machine for an appointment that has been deleted from my current view of iCal. Can I "restore" a previous version of iCal without losing all the entries I've made to the calendar since that prior date?

I want to search Time Machine for an appointment that has been deleted from my current view of iCal. Can I "restore" a previous version of iCal without losing all the entries I've made to the calendar since that prior date?

No. I tried it on my Time Machine (I had just made one change today, so I knew I would not be left in the lurch if I failed) and when I clicked on restore I got this message:
It seems you have several options. I chose 'Keep Both'. I suggest that you proceed with your search.
Ciao.

HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

You copy them from your old computer or your backup copy of your old computer.
The iphone is not a backup/storage device.

My app account has been deleted from appstore,and i can't download purchased items on my new imac

my app account has been deleted from appstore,and i can't download purchased items on my new imac
what should i do?i purchased aperture 3 and final cut pro

"my app account"
Click Account under Quick Links right side of the App Store window then sign in.
If you can login using your Apple ID, then your account is in good standing.
Otherwise try here > Apple ID: "This Apple ID has been disabled for security reasons" appears

Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory. Are the devices in the U.S.A also affected?

Hello, I would like to buy an I Pod Classic 160 GB and have heard that the volume limit in Europe has been reduced from the factory.
Are the devices in the U.S.A also affected?
Volker

No, they are not. But getting round this is not that simple.
Until recently, the European Volume Limit that you're referring to affected iPods sold within the EU (European Union countries), so one purchased in the US would not be affected by this. Nor, in theory, would an iPod purchased in Norway or Russia, since neither of them are in the EU.
However, iPod Classics now sold within the UK (where I live) now appear to have an option to disable the EU Volume Limit. I would assume therefore, that this option is available on an iPod Classic bought anywhere within the EU. The firmware on an iPod Classic that can turn off the EU volume Limit is 2.0.5.
iPod Classics running earlier versions of the firmware (including 2.0.4) cannot be upgraded. I have personally seen one with 2.0.5 Mac on it in an Apple Store and the EU limit could be turned off. Check the picture from Badgorr in this thread New Option to turn off EU Volume Cap? (It's towards the bottom of the page.) However, non-Apple stores may still have older stock, so be aware of this when you go shopping.
Experience tells me that buying an iPod from outside the European Union area is not that simple and you are unlikely to manage it. Apple will not ship goods to another country. So either you travel to the US to buy one from a shop (that's a bit extravagant) or you persuade someone else to buy one and send it to you. However, not only will you have the cost of shipping, but in either case, your country's tax department will almost certainly add tax to it when it comes into the country. The service delivering it will apply the tax and charge you for doing so as well or you get charged by the customs department at the airport.

I have just got iTunes match. It appears that since joining and starting it some tunes have been deleted from my library. They are shown in the listing but iTunes can no longer locate the files. Any suggestions?

I have just got iTunes match. It appears that since joining and starting it some tunes have been deleted from my library. They are shown in the listing but iTunes can no longer locate the files. Any suggestions?

If they are showing in the Videos app with a cloud then go into Settings > iTunes & App Store on your phone and set Videos (under the 'Show All') heading 'off' - you might (depending upon which country that you arein) have a similar button for music and the Music app.

I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help

I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help

I experienced this issue as well.
Background:
I had opened an ICS attachment for a repeating event on my iPhone, which added the item to my phone's calendar. I did not have the option to delete the calendar entry from my phone, and the item did not appear on the calendar on my Mac. My phone is currently running iOS 7 (but the problem began quite awhile ago; I don't recall which version of iOS was installed when it started).
Solution (summary):
Create a new calendar, move the items that you wish to delete to the new calendar, then delete the new calendar
Solution (detailed steps):
Create a new calendar
On your phone, open the calendar app
Tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Scroll to the bottom of the list and tap the "Add Calendar..." option
Give your new calendar a good name, such as "Delete me"
Tap "Done" in the top right corner to save the new calendar
Tap "Done" in the top left corner to finish editing the list of calendars
Tap "Done" to exit the list of calendars
Assign all calendar entries that you wish to delete to the calendar you created in step 1
Tap a calendar entry that you wish to delete
Tap the "Edit" button in the top right corner
Scroll down until you see the Calendar field (on an iPhone or iPod it's usually just below the bottom of the screen), then tap the Calendar field to bring up the list of available calendars
Tap the name of the calendar that you created in step 1 (e.g. "Delete me"); the screen should return to the main calendar entry page
Tap "Done" in the top right corner of the screen. You may need to then tap the "< Day" button on the top left of the screen to return to the main calendar view
Repeat the instructions in step 2 for each of the calendar entries that you wish to delete
Delete the calendar that you created in step 2 (this will delete all calendar entries assigned to this calendar)
From the main screen in the calendar app, tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Tap the entry for the calendar that you created in step 2 (e.g. "Delete me")
Scroll to the bottom of the scren and tap the "Delete Calendar" option. You should be prompted with a warning that explains that "All events associated with this calendar will also be deleted."
If you're sure that the only items on this calendar are items that you wish to delete, tap the "Delete Calendar" button
Tap "Done" in the top right corner to exit the Edit Calendars screen
Tap "Done" to exit the list of calendars. You should now be back at the main view of the calendars app
Rejoice, your pesky repeating calendar events have been deleted
At this point all of the items that you assigned to the deleted calendar should be gone
Repeat the steps above for any entries that you missed
Post another message to this thread if this did not resolve your problem
minor edit for clarity made by ScottHooley

HT5731 I have pre-bought an album for a March 25 release. But a single has been released from the album and i cant seem to download it, its says $0.99. Do i need to buy the single aswell? Shouldnt I have access to the song becasue i already pre-bought the

I have pre-bought an album for a March 25 release. But a single has been released from the album and i cant seem to download it, its says $0.99. Do i need to buy the single aswell? Shouldnt I have access to the song becasue i already pre-bought the album?

Hello, Edgarflo.
Thank you for visiting Apple Support Communities.
Here is some helpful information regarding preorder albums in iTunes. I would recommend checking to see if you can download the single directly from the preorder album as some artists release a single that is separate from the album and will be a different purchase.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Cheers,
Jason H.

My ipads and ipad mini macbook it has been stolen from my house

two I pod touch 2 ipad 1 ipad mini 1 macbook has been stolen from my house 2 days ago can apple see this people when they connect my divices to internet will i get call from apple so that I can report to police&

Only if the iCloud Find my iPhone service is turned on, Location Services is on, the iPad is powered on, the iPad has an active Internet connection, and the iPad has not been wiped.

Z10 sending message in "band" over and over continuously although the message has been deleted from phone

I sent a document on my Z10 to someone. Since then the message continues to be transmitted on my WEBMAIL box although it has long been deleted from my Z10. If I remove the battery the problems becomes resolved. how can I fix this problem while continuing to use my phone.Much obliged Alec Pierre
jgapierre

if you don't have a backup then most likely those emails are gone for good.
just in case check the actual mailbox folders in finder.
go to the folder /users/username/library/mail. inside it there are folders for your email accounts. drill into the folder for the account in question to the folder Messages. there should be a bunch of .emlx files. they are the actual files for all the emails in that mailbox. how many are there? you can quicklook them and see what's inside. any old emails among them. if yes, post back and we can try to recover them.
if only emails for the last 24 hours are present then you are out of luck.
in the future I strongly recommend you start backing up.

More than 1 ms MOMO digital IO 7358 in LabView Real-Time 8.5, error downloading EPOS dll file into RT

Hi all,
I have several problems here, I tried to google but still I could not solve the problem.
Here are my questions:
1. I tried to download an example program of EPOS which require to download a DLL file into the RT, but it failed, here's the error (I attached the picture) 01/02/2008 13:29:50.511 [error] LabVIEW:
Failed to load shared library EposCmd.dll:_VCS_GetProtocolStackName@16:C on RT target device.
From the NI.com forum,
I found a similar problem and it said by installing Network Variable Engine and Variable Client Support into the LV-RT, and I did, but still failed. Any one can help me about this?
2. I posted a question also in lavag, I think this section is more appropriate. "I
am trying to use the digital IO of the motion controller of 7358, but then I realized the delay is more that 1 ms (I checked using the oscilloscope), I attached the code (MOMO = Must On Must Off). Is this real, I mean the hardware delay between on-off is as big as this? Anyone knows the solution for this?"
Note: I am using LV-RT 8.5, PXI-7358 Motion Controller, EPOS 70/10
Thank you for any help
Message Edited by bono02 on 01-02-2008 05:47 AM
Attachments:
maxon-rt3.JPG ‏120 KB
momo1.JPG ‏55 KB

Hello bono,
1. From what I have seen, this error is usually caused by one of two things. The first is the Shared Variable software components not being installed, which is covered in this Knowledgebase. The other is due to a corruption of the ni-rt.ini file on the Real-Time controller. You can follow the steps layed out in this Knowledgebase, which gives three possible remedies. You could also try reinstalling the software (firmware) or create a PXI Uninstall disk from Measurement & Automation Explorer by selecting Tools»Remote Systems»RT PXI Disk Utilities»Create PXI Uninstall Disk. Boot the PXI Controller from the PXI Uninstall Disk, which will erase the ni-rt.ini and ph_exec.exe on the target. However, you will need to reconfigure the controller after doing this.
2. Due to the nature of the digital I/O on motion controllers, it is not surprising that you are seeing around a 1ms delay. It deals with the fact that it must update the motion controller with the new value on each control loop. This Knowledgebase gives a little more clarification regarding the 7350 specs.
Carlton
CLD

VI on LabVIEW real-time is loading and running a DLL which has been deleted from the machine

Similar Messages

Maybe you are looking for