VI to locate files?

Hello all,
I am creating a VI that locates all VI's and controls that are sub-VI's
of a user-input VI. Using the "property node" -> "Callees" function, I
can get the names of all the sub-VI's, but I need the paths.
Does anyone know how to locate the path of a file given the filename?
I'm sure this has been done before. It would have to use recursion to
seach all dirs, and I've already done two recursive VI's today and it's
driving me nuts.
Thanks to anyone who can help.
Rick
[email protected]
Chesapeake Sciences Corp.
1127B Benfield Blvd Millersville, MD 21108
Tel: (410) 923-1300 x3430 Fax: (410) 923-2669

Hello
Just open a VI reference for each VI name and use the property node "VI
path.
Jean-Pierre
Rick Nelson a écrit dans le message :
[email protected]..
>
> Hello all,
>
> I am creating a VI that locates all VI's and controls that are sub-VI's
> of a user-input VI. Using the "property node" -> "Callees" function, I
> can get the names of all the sub-VI's, but I need the paths.
>
> Does anyone know how to locate the path of a file given the filename?
> I'm sure this has been done before. It would have to use recursion to
> seach all dirs, and I've already done two recursive VI's today and it's
> driving me nuts.
>
> Thanks to anyone who can help.
>
> Rick
> [email protected]
>
> Chesapeake Sciences Corp.
> 1127B Benfield
Blvd Millersville, MD 21108
>
> Tel: (410) 923-1300 x3430 Fax: (410) 923-2669

Similar Messages

Error message "cannot locate file"

I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?

Have you added all the songs to the library? Just by dragging and dropping?

Itunes can't locate files after I listen to it on the Ipod

It seems that every time I listen to a song, I notice that Itunes can't locate it anymore. When I go to Itunes and look in my music folder, there is an exclamation point next to the song. When I click on it, the error message reads "cannot locate file, would you like to locate it now". At first it was only one or two songs, now it's over 50! These songs are still on my Ipod,just no longer in Itunes. I know how to recover the music b/c it's in my hard drive, I just don't want to sit there and find all these songs all over again. Help please.

I too have been having the same problem... I am a new ipod owner and same with itunes. And being a new owner and user I got the new itunes. It has done the exclimation point since the first day I got it. But mine is simple to fix. I mearly just exit out of itunes and re-open it. I dont evn have to wait at all. It shows the exclimation point with about 20 of my songs and it hasnt gotten in my way yet. But the main problem that makes me mad is that my ipod is only 2 weeks old but I tried to get some of my friends music and she has the older version of itunes and my ipod ONLY works on the new version. Very frustrating if you ask me.
Hp Windows XP

Could not open location 'file:///home/geoff'

I'm using Gnome and after the last update today ( I always do pacman -Syu everyday and accept whatever it gives me in my noobidity ):(
Now I find that when I go to Places--Home Folder and Places--Desktop I get this message.
Could not open location 'file:///home/geoff' (or 'file:///home/geoff/Desktop')
There was an error launching the default action command associated with this location
Have I done something stupid in accepting all updates without question? Or is it something else?
Can you put me on the right learning curve and fix this.
Thanks

I think that the latest udev upgrade has caused the problem. Correct me if I'm wrong.
I did the same upgrade on my laptop and got the same fault.
Apart from the faults in my previous message if I open a terminal over any page I'm looking at, like this for instance, it will not stay "above" the page when the box "only on this workspace" is checked. I have to check "always on top" to make it stay so I can cut and paste things.
When the terminal is minimized in the bottom panel and I click on it, it comes up but the moment I move the mouse pointer to the terminal screen it disappears back to being minimized.
I've never had this weird behavior before.
Hoping someone can help
thanks

Locate file window doesn't work

Ok, this problem occures only on our Z800 workstations.
Everything works as expected on my laptop.
When I try to relink a media file, the relink media window opens, and then I click the Locate button.
The new window ALWAYS opens in the top most level (basically My Computer in windows) and not in the last used directory.
I think it has something to do with the second problem - the path text box doesn't work. Whatever I enter there and click Return - nothing happens. It doesn't navigate to the folder specified in the path field. The only way to navigate is to go throught the folder tree on the left.
For every file I have to do it always from the top most level - that is a lot of clicking.
Also if I uncheck Use Media Browser to locate files, the default windows dialog properly navigates to the last known location of the file.
I know it's an error - since on my laptop everything works fine. The window opens in the last know location of the media file and I can easily navigate using the path field.
Any suggestions what could be the reason for this?

Jim Simon wrote:
I'm not sure if this is a bug. The Locate File dialog seems to be opening where it thinks the file might be, rather than where it was. For example, I renamed the 0000.mts file for a particular project, and when I opened Premiere Pro, Locate File went to the 0000.mts file from another project/folder, thinking that might be it.
So...if you have no other files that might be the missing file, the dialog starts at the top.
Jim,
I understand what you are saying in regard to where it thinks it might be. However if I manually type a path where a file I want to link to rathter then clicking 20 times in the folder tree, it throws a "File not accessible" error. Yet if I use the folder tree to navigate to the same file it sees it and links to it fine.
It just seems that whenever I try to manually type a path in the path address field is when the error occurs.
Are you able to manually type in a path > hit enter/return and have it link to the file?

Custom Script Code to create multi-Location files from Master File

Hi,
I currently have a custom script that loads a master file (which contains all Entities data). I would like to do the following;
1. Generate multiple files from the master files, one file per location for all locations.
2. Each location file should contain data only data relevant to that Location defined by Validation Entity definitions.
Does anyone have a sample code to do the above?
Essentially, we want to run this Master Custom Script every hour or so and generate all the Locations' files and have users load them ad-hoc.
Please let me know.
Thanks

Your requirement is quite sepcific so you will have to write the script for this yourself (or hire someone to do it for you). What I will say is that via vbscript and the FDM API all the components you require to do this are there and it can be scheduled with FDM's Task Manager.

Itunes cannot locate files all of a sudden. Why?

I had recently went to a friends house who had home sharing turned on. I do not have this feature turned on.
When I left her house, I could no longer play my music.
It says " Itunes cannot locate file "
The songs that it is doing this for are songs I had to transfer over by a memory card from a previous computer.
Why all of a sudden are they missing files?

If you weren't doing Home Sharing then the HS thing likely has absolutely nothing to do with this. You must have done something else that caused the links in iTunes database to break. iTunes keeps a list of what files it needs to play and where they are located. If you do something such as renaming a folder or moving a folder or file, it can cause that location reference to no longer be valid.

Including location file in Attachment of IP_MESSAGE_TYPE to B2B

Dear Reader,
I am using SOA suite 10.1.3.4. and B2B 10g configured in Suse.
I have made a BPEL proces that enqueues messages using an AQ adapter to the B2B database. For this I need to fill in the IP_MESSAGE_TYPE (payload header) that is required by EBxml that is set in the B2B Application. I have set the MSG_ID, FROM_PARTY, TO_PARTY, DOCTYPE_NAME, DOCTYPE_REVISION, ACTION_NAME, MSG_TYPE occording to the configurations done in the B2B application. This works perfectly and the message is picked up by the B2B application.
During new requirement I need to send an attachment to the B2B application that communicted this to the trading partner (using EBxml). THe moment I fill in the attachment the message produces errors in the B2B Application and I don't know what I am doing wrong. I would like to know if somebody can tell me in steps how I need to fill in the attachment in the payload header. I have tried the following:
1. Using an assign activity to fill the attachment field in the payload header with the expression: 'file:///home/oracle/b2b/attachments/inbound/example.xml'
The error 'Unable to create the protocol specific B2B message' arrise in the B2B application.
2. I have followed the steps in link:
https://metalink2.oracle.com/metalink/plsql/f?p=130:14:4427741198166476399::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,754149.1,1,1,1,helvetica
I have created the xsd AttachmentsDescriptor.xsd in my local bpel process and assign the below XML fragment to the attachment field in the payload header.
<Attachments xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="AttachmentsDescriptor.xsd" version="1.0" boundary="boundary---">
<AttachmentPart>
<Location>file:///home/oracle/b2b/attachments/inbound/example.xml</Location>
<Content-Type>
<Top-Level-Type>application</Top-Level-Type>
<Sub-Type>xml</Sub-Type>
</Content-Type>
</AttachmentPart>
</Attachments>
This time no error occured everything seem to work, but in the B2B database there is no attachment specified in the wire message.
I hope somebody can explain me what I am doing wrong and what the steps in BPEL/B2B are to fix my problem.
Thanks for your time.
Regards,
Sander
Edited by: user606887 on Sep 25, 2009 4:53 AM

Hi Anuj,
Thanks for your reply. I have tested it on the server and it works. I am now busy to make it work with my BPEL proces. I am doing the following:
1. I am using a file adapter to store the sample.xml file on the configurated directorie specified in "oracle.tip.adapter.b2b.attachments.dir"
2. I pass the name of the file in this case Sample.xml in the field Attachment of IP_MESSAGE_TYPE (other mandatory fields of IP_MESSAGE_TYPE are filled)
My question is if I can make it work without step 1 to prevent extra I/O on the server. I would like to fill the Attachment of IP_MESSAGE_TYPE in such a way that I don't need the Sample.xml and that my attachment is picked up directly from the server. I am wondering how I can achieve this (if its possible).
My last question is if there is any good documentation for B2b 10g how I should configure the environment to prevent connections being kept alive when enqueuing message using AQ adapter.
Thanks for your time and help so far.
Regards,
Sander

PSE 7: "Base directory" for locating files?

I'm trying to salvage a Photoshop Elements 7 catalog that won't cleanly regenerate thumbtails on the old machine (so it hangs). I tried deleting the cache, but the system crashes the first couple of times regenerating the thumbnails, and eventually seems to "hang" at 50% CPU (sits for hours, seeming doing nothing). The log file is no help.
On my new machine, there is no hang, but PSE 7 it is VERY slow to re-locate files, since everything is now at a different location.
Question: Is there a way to set the "base directory" for where Elements starts its search for files, when the location referenced in the catalog has changed? Is there another way to update the catalog, when the physical location of files has changed?
I wanted to backup from the old machine and restore to the new via an external USB disk, but because the old machine "hangs" on the thumbnails, I can't. At this point, I'm thinking of re-cataloging my thousands of photos...

That's not how PSE works.
PSE knows about photos only if you Import the photos into PSE. Then, PSE knows what folder the photo files are in, and they must remain in that directory, unless you use PSE to move them.
So, if the photos are in different directories on the new computer, you must reconnect the photos to the PSE Organizer. Here are the details on how to do this: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Quickly_reconnecting_la rge

Can't locate files on itunes

hen I try to open file (music, video, podcast, etc) receive message from Itunes when I click on an item the"cain't locate file. When I click on locate itunes doesn't point me to the file.
Help!

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTuneshas changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
If you have to resort to trying to pull back the library from your iPod see Recover your iTunes library from your iPod or iOS device.
tt2

CAF service: import web services using Remote Location / File System

Hallo Experts
I use the NetWeaver DevStudio 7.1 SP5.
I have a CAF project and in this project I want to import one WebService as external service. I have chosen the option "Remote location/ File System" in the import web service wizard, then I enter the URL in the following step. But at the end of wizard I got the error "WSDL could not be downloaded because Server returned HTTP response code 403 for URL". The web service I've deployed and tested on the server. It runs well. Any Hints?
Thanks in advance
Kind Regards
Ping

Hallo
I found out: if I enter one URL "http://xxxx.xx.ch:51000/ExampleService/ExampleBean?wsdl&mode=ws_policy". Afterwards I got the error "http://xxxx.xx.ch:51000/ExampleService/ExampleBean?wsdlmode=ws_policy". & ist not correct displayed. Is this the problem that I got 403 Error... It is a bug in SP5
Thanks if you can tell me some work-arround.
Ping

I can't access half of my downloaded music. I get a message, "can't locate file" What is up with that? I dauthorized my computer and reloaded itunes, but it did not solve the problem. Any suggestions? Thank you.

I can't access half of my downladed music. I get a message, "can't locate file." I dauthorized my computer and reloaded itunes, but it did not help. Any suggestions? Thank you.

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

BizTalk 2006 R2 Receive Location )File - XLS) Being Read Twice?

Scenario: IBM ESB is writing a XLS file to a UNC path that is polled by BizTalk 2006 R2 Receive Location (File) but the file is being processed twice on a few occasions that cannot be reproduced. The polling interval is set to 60 seconds and then the file
is removed. My developed confirmed the duplicate processing via our database that records incoming messages.
Any idea on how to proceed?
-Shawn
Shawn ([email protected])

Update!
I was able to duplicate this issue but I haven’t determined root cause yet. This one is a bit tricky. I kept processing files until I noticed some warnings in the EventViewer. The BizTalk service became disabled and then re-enabled
causing the message to be processed again. Any ideas?
4:20:59 PM – I re-enabled but this must automatically be done by BizTalk for the duplicate message to be processed
The following BizTalk host instance has initialized successfully.
BizTalk host name: BizTalkServerApplication
Windows service name: BTSSvc$BizTalkServerApplication
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
4:20:32 PM
An error occurred that requires the BizTalk service to terminate. The most common causes are the following:
1) An unexpected out of memory error.
OR
2) An inability to connect or a loss of connectivity to one of the BizTalk databases.
The service will shutdown and auto-restart in 1 minute. If the problematic database remains unavailable, this cycle will repeat.
Error message: Exception has been thrown by the target of an invocation.
Error source: mscorlib
BizTalk host name: BizTalkServerApplication
Windows service name: BTSSvc$BizTalkServerApplication
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
4:19:48 PM
All receive locations are being temporarily disabled because either the MessageBox or Configuration database is not available. When these databases become available, the
receive locations will be automatically enabled.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
4:19:34 PM
The Messaging Engine failed to retrieve the configuration from the database. Details:"The database cannot be accessed because the system is recovering from an earlier database
failure. ".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Shawn ([email protected])

Locating files in 10.8

When doing a search for a file in system 10.6 the returned results would indicate the path to the located file. I recently update to system 10.8. When search using system 10.8,I can not find the path. How can I activate this feature?

Show Path Bar from search window's View menubar.

Error message on On Location files

I use Adobe On Location on a laptop for recording video quite a bit. I then copy the folder with the On Location files to my main computer for editing. When I import an .avi file created in On Location into Premiere CS4, I see a yellow exclamation symbol in lower right hand corner. Clicking on this symbol brings up the message "File importer detected an inconsistancy in the structure of xxxx.avi. Reading and writing this file's metadata (XMP) has been disabled." However, I have no problems editing the files, so I haven't worried about it. But I am curious to know why this happens on every .avi file created in On Location, and if I should be worried about it.
J. D.

I am having the same issue when importing clips from OnLocation. I am beginning a huge production and I am concerned this issue might cause issues down the road with editing, encoding, mastering.
I have checked the files and sequence and they are the same.
I have seen others have this issue, but there does not seem to be anyone that knows exactly why it's happening and how to correct it. Including Adobe, I weent round & round with Adobe support in India and finally gave up.
Error message in Event Panel: File importer detected an inconsistency in the file structure of filename.avi. Reading and writing this file's metadate (XMP) has been disabled.
Adobe Production Premium CS4
Premier Pro CS4 v.4.2.1
OnLocation CS4
Windows 7, Ultimate 64bit
12GB Memory
1TB System HDD
2TB - RAID 0 Video Processing HDDs
2TB Video Storage HDD
nVida Quadro 1800 1GB Video
1934 FW Capture

Locating files on an external drive

My iTunes library is saved on an external drive as it's too big for my laptop's HD. I now also access it from a MacBook at work.
I've had no problem accessing my library on Mac, but I now can't locate files from my PC. I get an '!' with every file, which I can then locate individually, but iTune doesn't seem to find the entire library in the right drive & folder (I've set the right address in Preferences).
Can anyone help?
Thanks!
Charlotte

I've got the exact same problem after I moved my pictures out of the Aperture library and into a Master folder on the local harddrive, where the pictures are organized into folders by year/month/date.
All pictures imported after the "switch" are Online and the old ones (about 15000) are Offline.
In Aperture I select all the photos in my library, go File -> Locate referenced files and a window shows.
In the upper left half of the window there is a list over the files that are Online and Offline. The thing is that the Offline files have the correct file path, but the volume is set to <null>.
I have selected a file that is Offline in the upper half of the window, and in the lower half I select the exact file path and push button labelled Reconnect. The selected file now shows in the the category of Online files, as expected. If i push the button labelled Reconnect All, the same thing happens with that one file selected, but not with any of the other offline files. I have also tried to first push Reconnect then followed by Reconnect All, with the same result. I really don't want to repeat this process 15000 more times...
Is there an other way to update the offline files with the correct Volume information?

VI to locate files?

Similar Messages

Maybe you are looking for