Video flickering when published live from camera

I am getting flickered image when published from live camera.
Settings done for view of flash player in html page and settings done before publishing in actionscript is as follows:
setting in HTML:
size of flash player object in html page is 240*180
setting in actionscript:
stage size is 216*162
size of video component is 216*162
camera.setMode varies as:- camera.setMode(160,120,6) //////////////in this case there is a flickering
                                             camera.setMode(320,240,8) //////////////in this case there is a flickering
                                             camera.setMode(640,480,2) //////////////in this case there is no flickering.
Now what I have tried to resolve the issue:
1) changed the size in html to 320*240
2) set the stage size to 320*240
3) size of video component to 320*240
I have tried all permutations for the above three scenario but still not got the solution.
I have also tried to make the size of video component as per the camera height and width respectively, with/ without altering the size of stage, still no success.
Please help.
Thanks in advance
Nitesh

first thing to try is to upgrade your video driver.  if the issue still persists, please enter a bug here: https://bugbase.adobe.com/index.cfm
please attach your dxdiag info in the bug - http://kb2.adobe.com/cps/839/cpsid_83952.html#main_For_Windows_users

Similar Messages

  • In ADOBE BRIDGE CS6 "folder can not be created" appears when getting photos from camera

    Has anyone seen this when getting photos from camera in ADOBE BRIDGE CS6?
    "Folder cannot be created"

    I solved the problem myself.
    jwerth2

  • Webcam Video pauses when recording sound from microphone

    I have a strange problem which i am encountering when recording and playing back webcam video.
    I am developing a small application for recording webcam video and audio using FMS and playing it back later from FMS.
    I am using AS 3.0, FMS 3.5 and flash CS 5.5
    When i record only the video from webcam without sound from microphone the playback is fine. But when i record microphone sound also along with the video, and when i playback the video pauses right where the sound starts for 10 sec or more and then it starts playing. Towards the end the video pauses again and only the sound goes on till the end.
    I tried setting the buffertime to 50 before ns.publish and ns.play but that didnt help either.
    I tried using the flvplayback component and even their it pauses.
    Any help is appreciated.

    Haha, that is such a genius use of common sense! Thank you, I didn't think of that. I certainly will!
    However, does anyone know if there is a way of adjusting the program of garageband to fix this issue? Using headphones certainly fixes the symptoms of my problem, but it doesn't actually address the root cause: garageband should only be recording the input through the microphone. I shouldn't need to wear headphones. (And doing so inhibits my ability to clearly hear myself play, and stay in tune.)

  • Embedded Vimeo videos play when published on desktop but won't show up online

    I have a site that I updated recently … when I finished revising in iWeb and published it to my URL none of the embedded Vimeo videos show up.  According to Vimeo customer support, and my web host, there is "no code or file" in the space where the video/html snippet should be. Tried rebuilding pages from scratch, still no video.  Same process worked before and my site was functioning fine until I made this most recent update.  Any reason why embed code would work prior to update, and not now?  Why it finds the video when published to a folder on my desktop, but not when it's published to URL?  Working with iWeb 3.0 and OS 10.9.4.

    From your statements I guess that you put the files on the server yourself.
    Make sure that you put ALL the files and folders on the server.
    And why not provide a link to the page?

  • Capture live from camera

    Hi guys,
    I was trying to capture some footage straight from camera but it won't let me do it when I pressed the capture now button. It kept on treating the log and capture as if its capturing from tape. It was asking for the camera to be turned into vtr mode. I have done this before but I can't remember what I've done differently to make it work.
    Any suggestion will be greatly appreaciated.
    Thanks guys.

    James M. wrote:
    You might have done it before, but never with final cut pro... try using Quicktime for live capture.
    James, you sure about that? I can capture live by setting the L&C window to a non-controllable device and hitting capture now. That way FCP is not looking for something like a VTR to control, it just accepts whatever signal is present on the FW bus.
    K

  • Error message when opening photo from Camera Roll

    I just updated to iOS 4.3
    Now, when I open a photo from camera roll it says "El formato de esta pelicula es incompatible", which means something like "The format of this movie is not compatible" (it doesn't matter if I try to open a photo or a movie).
    So I tap the "OK" button below the message and then I can see the photo.
    Any idea of what this means?
    Thank you!

    Answer is in this post:
    http://discussions.apple.com/thread.jspa?messageID=13205746#13205746
    Just delete the corrupted movie.

  • Bridge CS4  Not enough room on destination disk, when Getting Photos from Camera

    When trying to "Get Photos from Camera" after the 2nd or 3rd photo has been moved to folders I receive a box that states:
    The backup destination folder is low on disk space, and could not obtain all files from the device. (which is a compact flash card) Please select a different folder or cleanup disk space and try again.
    Please note there is plenty of space available on both drives that the photos are being saved to.

    Mike
    what Ramón says,
    I use Downloader on a daily base and don't have troubles with it. And yes it is not a very brilliant piece of software but it does work.
    I would suggest that you go to the user library/ preferences and in here find the downloader plist file. drag this to the trash, restart photodownloader (now at factory settings, you need to reset it again to your wishes) and try again.
    btw
    in an other thread Scott showed an other application for image ingestion. It looks very great but you need to pay a small fee for it :-)
    Scott Burns - 9:20am Mar 5, 09 PST (#4 of 5)
    Have you taken a look at ImageIngester?
    http://ImageIngester.com/

  • HT3775 When i import from camera i get the following on opening image (The document "IMAG0004.AVI" could not be opened. A required codec isn't available.) Any suggestions please.

    When i import from my camera and try to view the image i get the following message --(QuickTime Player can't open "IMAG0002.AVI" because a required codec isn't available.) Any information would help.

    http://perian.org
    Free (although no longer being developed).

  • Error message when donloading images from camera....?!?!?

    I have been trying to import images from my Canon Rebel digital camera and am having some issues. I was having trouble with iPhoto which is why I purchased this great program. At first, the images were downloading fast and furious with Aperture but now I am having some of the same issues that I was having with iPhoto. It is taking forever and a day to import my RAW images and now I am getting an error message with almost all of my photos. It stalls out on them (and the red light stops flashing on my camera as if they aren't communicating) and then I get the message that there was "a problem downloading that image" and this error code: (ICA download error -609).
    This is extremely frustrating!! HELP!
    iMac   Mac OS X (10.4.6)  
    iMac   Mac OS X (10.4.6)  

    You're loading straight off the camera?
    Be sure the camera isn't shutting itself off in the middle of the transfer. It may auto-turn-off after a minute.
    I'd really suggest you use a card reader. You can get a USB2 CF reader which will be 10x faster than direct camera download for like $20. I can't fathom why anyone would use direct-from-camera in lieu of a reader, unless they were doing tethered shooting.

  • Frames Missing When publish live video to fms server

    I am creating flex mobile application , that allows people to connect using a android camera and microphone,then recording video from android camera to Flash Media Server(FMS) 5 starter using adobe flex but when I play the recorded live video from FMS it's missing some frames. I have set the camera.fps to 30 but when I trace out the currentFPS for camera  30 and  netStream's currentFPS  returns low value, usually falls between 2 and 5 (high 1280X720),15 and 20(medium 640x480),25 and 30(low 320X240).where netStream is the object of the flash.net.NetStream class

    Hi
    I think this would be useful to you.
    http://help.adobe.com/en_US/flashmediaserver/devguide/WSd391de4d9c7bd609-52e437a812a3725df a0-8000.html#WSd391de4d9c7bd609-52e437a812a3725dfa0-7ff5

  • Shotwell crash/freeze when video files present in preview from camera

    Presence of any .avi video file in Shotwell causes the following error:
    Error in `shotwell': malloc(): memory corruption (fast): 0x00000000087c9080
    I've searched around and found many problems with Shotwell and videos, and other errors like mine, but never together. Already imported videos (through folder import procedure) play and display in Shotwell properly, so the program understands them, it's just with reading them from a card reader using the "Mass Storage Camera" folder option.
    Any suggestions on how to address this problem other than the workarounds? This is for my mother's computer, so I'm not always around to help get the videos removed from the card first.
    Can I just get Shotwell to flat out ignore all video files? That would be ideal, actually.
    Last edited by hooya (2014-06-22 18:16:50)

    Organizing related files with Smart Folders
    This also applies for 10.5 Leopard.
    If you open Automator (Applications) and choose Library >> Files and folders >> Find Finder items and draw it to the right side of the window. Now you can search the whole computer or just your user folder for example (from the drop down menu). Then you can make further adjustments like find .avi (look at the image)
    http://personal.inet.fi/koti/kimi/automator_alias.png
    Then you draw the new aliases to the window and choose what folder it saves the aliases too, in my case my Movies-folder (Elokuvat is Movies in finnish). After that you press Run and it saves the aliases. Easy!
    The original files are still located inside the iPhoto Library and the Movies-folder just contains the aliases.

  • Change the video resolution when capturing a WEB-cameras

    Language: Java
    It is used in addition: JMF
    When capturing video from WEB-cameras with JMF - getting the video is at the lowest resolution.
    Can you please tell how to change the video resolution?
    The code by which the captured image (no SWING-forms):
    MediaLocator getWebCam = new MediaLocator("vfw://0");
    private Player player;
    Timer timer = new Timer(40, this);
    public BufferedImage grabFrameImage() {
    Image image = null;
    FrameGrabbingControl frameGrabbingControl = null;
    if (player != null)
    frameGrabbingControl = (FrameGrabbingControl) player.getControl("javax.media.control.FrameGrabbingControl");
    Buffer buffer = frameGrabbingControl.grabFrame();
    if (buffer != null)
    image = new BufferToImage((VideoFormat) buffer.getFormat()).createImage(buffer);
    if (image != null)
    return (BufferedImage) image;
    return null;
    public WorkWithWebCam() throws NoDataSourceException, IOException, NoPlayerException {
    initComponents();
    player = Manager.createPlayer(Manager.createDataSource(getWebCam));
    player.start();
    private void jButton1ActionPerformed(ActionEvent e) {
    timer.start();
    public static void main(String args[]) {
    EventQueue.invokeLater(new Runnable() {
    public void run() {
    try{
    new WorkWithWebCam().setVisible(true);
    }catch(Exception ex){}
    public void actionPerformed(ActionEvent e) {
    panelMain.getGraphics().drawImage(this.grabFrameImage(), 0, 0, 400, 300, null);
    P.S. Can you please tell how this forum can be identified code \ listing?

    Hello,
    I don't know if there is a way to change the video. But I think you can easily use your own videos by using a local .mpg or .3gp file via InputStream. Just change the player's parameters in video/mpg instead of capture://video.
    Hope it helps...
    Torsten

  • Flash Video Lost when Published

    I included a flash video in my captivate project. It looks fine in the preview. When I published my project the flash video does not play it just displays a blank slide. I appreciate any advice.

    Hi there
    Where are you playing the file from? Did you copy it to a server or are you testing on your own PC and seeing the issue?
    If you copied to a server, did you remember to copy the FLV file?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • New Photos Lost when Loading them from Camera to IPhoto

    Heres the story. Have a new Powerbook G4, Fuji S7000 Digital Camera, and a Scandisk imagemate Disk Reader for my XD Card. I've used this camera / drive with my PC for a couple years with no issues on importing....but with my Mac, it seems that if I take a group of pictures, and then wait a day and take some more and go to import them are lost. The photos will show on the camera as being take as I always check to make sure I got the shot....but its happened to me twice on my honeymoon where i've taken about 10 photos, and plugged my XD card into the Scandisk reader to import them....and the new photos are GONE. The pictures I'd taken the day earlier are still there...but the new ones are no where to be found. When I remove the disk and put them back in the camera to see if they are there....they are removed from there also. Help!!! I've lost some amazing photos and am getting "spooked" about losing more or even thinking about loading them onto IPhoto. any help / suggestions would be appreciated.

    Hi Bill,
    Until you or someone here can figure out what is going wrong I suggest using Image Capture to download your images. I also suggest you not to use the option of having Image Capture or iPhoto "delete the photos from the camera after downloading" You should always delete the photos from the camera yourself after you have seen they have downloaded safely to your computer.
    Using Image Capture to download images and video clips:
    Open up Image Capture which is found in the Applications folder.
    When it is opened, go to Image Capture/Preferences
    Under the General button choose
    Camera: When a camera is connected, open Image Capture.
    The next time you connect your camera Image Capture will open.
    In the window that opens you will see an Options button. Click on that button to set your options.
    To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
    iPhoto: How to Change the "Open Automatically" Preference
    If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

  • Powerpoint Flickers when published as a SWF

    I have recently upgrade from Captivate 4 to Captivate 6.  I am on version 6.0.1.240.  Almost all my work is done with an imported/linked power point presentation.  I am on a 32 bit Windows 7 operating system using the 32 bit version of captivate running under administrator.  I have all my work on the main computer (no network drives). 
    My first project created using 6 is ready for publishing.  When I publish the power point slides flicker between each one.  I searched the forums for help and found there was a patch from adobe.  It was contained in 6.0.1.240 which I have verified multiple times that I have loaded.  When I chatted online with adobe they indicated that it is the power point theme and to use blank white slides.  That is not an option for me.  I am using the corporate template which is very plain.  I have no transitions, no animations, no smart art.
    Does anyone have any suggestions for me?  The output from captivate 4 NEVER flickered.  I am hoping we don't have to try to go back to 4 as we just bought 15 licences to 6.

    Hi all
    Well, it is what it is as far as importing is concerned.
    If you don't have special animations or whatever that need to come in and survive the import process, another way around things is to simply configure PowerPoint to present in a window. Then launch the presentation and use Captivate to record just the client area as you would any other application. At that point Flash Filstrup should perform a hasty exit.
    Cheers... Rick

Maybe you are looking for