Video frozen into just a picture, when played all you see is part of that vid as a pic and my audio section in the background?
Hi, Im just editing our holiday video and i played around with a clip and now its frozen into just a picture and when i play it only the music in the audio section plays and all you see is a frozen picture from the video. What do I do? Thanks! DAN
Ye im also using a theme. I found the answer
You have to...
right click on the part thats not playing
Click revail in finder
Then drag the hilighted scene do your desktop
Import it
Then replace it
And it works !
Contact me if any problems, im more than happy to help...
Similar Messages
-
when using ituens to playback music - there is a strange horn like beep sound in the background every 1 or less. what to do to get rid of it
Yes...It is very annoying. I spent all day trying to get this worked out and after a lot of trial and error and a lot of restarts I got iTunes to work.
I deduced that I had a conflict of some sort and ruled it down to my temorary files that windows doesn't delete after it is finished with them. I cleaned out my temporary file by using this webpage http://personal-computer-tutor.com/deletingtempfiles.htm . After I did this my computer worked like it did when it was new!!
This seemed to work for me and it might for you if you are having problems. -
Why would my video clips be running too fast when played on the monitor panel?
I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
My main question is: "why would my video clips be running too fast when played on the monitor panel ?". This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline. I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline. They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes. I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ? Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips. They are in their original state.
Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
Help would be greatly appreciated.Yes, that is what the problem was.
Although the video camera on my Nokia N8, mobile was capturing at 25fps,
for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps. Once in Interpret Footage I was able to change the fps to 25.
Thanks for the help. -
My ipad just shuts down when playing word
my ipad just shuts down when playing words with friends, does anyone else have this problem?
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
i need any videos i shoot on my iphone, to go to the cloud automatically (when i get an icloud account). the demos show pics and docs going directly, but the demos are ambiguous about short videos i shoot on my phone....not backed up nightly, but available soon. help?
Since photo stream doesn't support videos, you would need to use an app to do this. Dropbox may be a good choice as I believe once enabled, all you have to do is open the app and it will automatically upload photos and videos taken since the last upload to your Dropbox account (see https://www.dropbox.com/help/289/en). If you aren't familiar with Dropbox, it's a very popular cloud service for hosting files and other media. Amazon just announced that its Cloud Drive service will soon support photos (http://9to5mac.com/2013/05/10/amazon-launches-cloud-drive-photos-app-for-iphone) /; perhaps it will also be extended to support videos at some point.
-
On my mac I have both Quicktime X and Quicktime 7 pro. Both applications seem to be crashing quite often lately. This happens when playing all files types. I notice it more with .flv file. It usually happens when i grab the time slider bar and try to move it. The apps will freeze and I have to "force quit" to get them to close. Sometimes putting the computer to sleep and waking it up helps. Is there a way to remedy this?
Oops, I needed to update my profile. I have snow leopard now
-
Somehow when I plugged my I phone into my sons Macbook i synched all of his info to my phone. Now his contacts and pics are on my phone and mine are lost. Any way I can get mine back?
You should be able to resync your iPhone to iTunes with your account on your computer.
-
I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?
Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data. -
I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?
Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers! -
I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
CarolThe first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.
-
I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??
When i try to restore my Back up using Itunes this is the message i get - "Unable to restore backup as the software is old - Please setup as a new device and then try to restore your backup" - Please advise. If i do so are there any chances of loosing my data. At this point in time i would be happy if i could just retreive my contacts list. Any suggestions would be greatly appreciated.Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
i tried reseting my ipod when i turn it back on all you see is the apple icon and a loading symbol how do i fix it ?
Try here:
iPhone and iPod touch: Frozen and unresponsive -
hi good morning,
I have a user that is working with the Adobe acrobat 9 standard. when he adds a stamp to a PDF that he opens from an Email in Outlook, this is the error he gets. (snapshot in the attached files)
can you help us with this problem?Hi, thanks for the fast response.
This is the Extended Font Pack i have installed on the Terminal server.
what do you mean by properly embedded? how can i check that?
BR
Eric Mizrachi -
Help! I upgraded to 11 and it worked once. Now, when I connect to itunes it tells me that required files are missing and please reinstall. I have reinstalled, I have deleted and reinstalled and the same message appears. Thanks.
Windows XPMeanwhile, I tried someone's suggestion to delete ITunes and Quicktime and reinstall both; still got the same mesage.
-
I got locked out of Mac os 9 and now I can't get into OS 9 or OS X. All I see is the Macintosh SE and a finder face and text that says "mac os 9.2 welcome to mac os". I can't get into COntrol Panel to reset the password to allow me to get in.
Do you have OS X and OS 9 installed on your Mac? If so, startup with the Option key depressed. This will open the Startup Manager window. Select the OS you want to start from & click the right arrow.
Cheers, Tom
Maybe you are looking for
-
Edge Animate/javscript API command similar to Actionscript fscommand('quit')?
Our company recently replaced Flash with Edge Animate due to some major memory leak issues when pulling in dynamic data for our digital signage. In Actionscript, it was easy to signal to the digital signage player that the movie was ending with a cus
-
Send Request to servlet every time with the back button
Hi, We are designing a web site in which all the pages are dynamic depending on what he does with his ordering system. Problem is when the uers request a change to the orders (eg deletes) the page is generated again. But the user can use the back but
-
Detecting ADFButton as ADF component in OpenScript
Hello, I want to identify the ADFButton as an ADF component in OpenScript. In the Object Identification for Oracle ADF Functional there is the web:commandButton tag. But The commandButton component has been deprecated. So the developers are using the
-
Multiple photo albums after synch
Hi, I have synchronized a lot of photo albums to the iPhone 4S (iOS 7.1) from my Win7 PC. After a while I see a lot of copies of the albums in the photo app (e.g. 100 instead of only 30 I have synchronized), but they do not contain the original photo
-
Optical audio output not working on mac mini
I have a brand new mac mini (less than a week old) that I've hooked up to my media center. Unfortunately, when I hook the optical audio output to my Pioneer receiver, I get no sound. I know the receiver decodes optical audio correctly because it does