View Database Tables in Multiple Tabs

How do you configure JDev to allow you to open and view multiple database tables in multiple tabs. Currently if I open 1 table and then open another, it loads them within the same tab.

User,
please always give us your jdev version, as the solution might depend on it...
Check it you find an option to pin the tab before you double click on the next table...
Timo

Similar Messages

  • How to view database table in OAF run page.

    Hi,
    how to view database table in OAF run page,any manual setting .please help me.
    thanks
    saran.

    Hi;
    1. This site side related EBS for your issue there is sqldeveloer dedicated forum side
    Forum Home » Application Development in PL/SQL » SQL Developer (Not for general SQL/PLSQL questions)
    2. Please see:
    http://docs.oracle.com/cd/B10501_01/java.920/a96655.pdf
    Regard
    Helios

  • How to view database table in oracle9i Jdeveloper

    Hi,
    how to view database table in oracle9i jdeveloper,any manual setting .please help me.
    thanks
    saran.

    In Jdeveloper go to View-->Connection Nevigator. there you will see all kind of connctions. Expand Database and check if your DB connection is present there. If not, you need to create using right clicking on Database and choose New Database Connecton. Here few screens will be there where you need to put the TNS entries of your database.
    Once DB connection is created, you can expand the connection by clicking on + icon and you can see different available schema objects. Again you need to expand Tables and you can look for specific table in there.
    Hope this clears your doubts.
    Thanks,
    Mukesh Uchaniya

  • How to view database table in oracle9i developer

    Hi,
    how to view database table in oracle9i developer,any manual setting .please help me.
    thanks
    saran.

    Hi;
    1. This site side related EBS for your issue there is sqldeveloer dedicated forum side
    Forum Home » Application Development in PL/SQL » SQL Developer (Not for general SQL/PLSQL questions)
    2. Please see:
    http://docs.oracle.com/cd/B10501_01/java.920/a96655.pdf
    Regard
    Helios

  • Scrollbars w/ one table across multiple tabs

    Please help, I'm stumped on this...
    User has requested that a single table be displayed across multiple tabbed canvases. Problem is that each tabbed canvase contains mulitple record data.
    I can define a scrollbar using the block property pallette and have the scroll bar then display on the first tab. How can I define and display a scroll bar on the second and third tabs?
    In the past, I created a stacked canvas view that replaces the 2nd/3rd tabs. In this instance, the user has requested that the data not be displayed via a stacked scrolling canvas.
    Any ideas?

    You mean the scrollbar does not scroll??
    What is the number of records displayed value of
    your block?
    Your scrollbar should be working when your number of
    records exceed the number of displayed items. Visual
    attributes is for look and feel only.
    Let's say your block number of records displayed is
    5 and you have 10 records the scrollbar is not
    scrolling??
    Regards,
    TonyCorrect. The scroll bar is not scrolling. For the base table block that is spread across three tabs, the number of records displayed is 5. When I execute the query, 6 records are returned. On the first tab, I used the block item property to set up the scroll bar x/y settings and height/width. Within the first tab, the scroll bar is working fine.
    When the second tab is activated (e.g. it is the top most tab page) (w/ the stack canvas overlay scrollbar), the bar appears in the correct position but there is no functionality attached to it. In other words it just appears as a bar like one would find on a bar graph. The bar does not resemble a scroll bar (visually) nor does it operate like one. Ditto for the 3rd tab.
    Do I need to attach a Dummy block with 5 records to each stacked canvas overlay scrollbar in order to have the look/feel and functionality of a scroll bar?
    Thanks,
    Steve

  • Updating Database table across multiple SAP systems

    Dear All,
    I am working on a requirement which is described as follows:
    The requirement is to keep a database table in sync across 10 different SAP clients (for production, test systems etc.). So when the database table is modified in source SAP system, it has to be replicated across all the clients and table of other SAP systems.
    So the queries from my side are:
    1. Whether XI should be used here as a middleware or direct RFC calls can do the updation across the SAP systems?
    2. If XI is to be used what would be the recommended approach (ABAP Proxy to ABAP Proxy communication?)
    Hope you can recommend me the best options to achieve this.
    Thanks & Regards,
    Pratik

    it depends on what tables are involved/ what type of data/what transactions cause the update.
    If you know the table names - then database level replication may be an option u2013 many projects do refresh their QA system with production data for a very real test data. If not, a hard disk level mirroring may have to be considered.
    There are other technologies like change pointers in conjunction with distribution model can also be considered - which could trigger idocs that can be sent to the other systems using ALE layer or ALE *** PI/XI

  • How to get multiple rows from database table?

    hello !
    I need to get multiple rows from a OLEDB database table and display them on a table object.
    I did "Wrap in subfrom" on the table,  set  subform of the table to "flowed", and checked "Repeat row for each data item" of Row1 of the table.
    But I can get only one row on the table object.
    I need your help.
    Thanks

    Hi,
    best practices when deleting multiple rows is to do this on the business service, not the view layer for performance reasons. When you selected the rows to delete and press submit, then in a managed bean you access thetable instance (put a reference to a managed bean from the table "binding" property") and call getSeletedRowKeys. In JDeveloper 11g, ADF Faces returns the RowKeySet as a Set of List, where each list conatins the server side row key (e.g. oracle.jbo.Key) if you use ADF BC. Then you create a List (ArrayList) with this keys in it and call a method exposed on the business service (through a method activity in ADF) and pass the list as an argument. On the server side you then access the View Object that holds the data and find the row to delte by the keys in the list
    Example 134 here: http://blogs.oracle.com/smuenchadf/examples/#134 provides you with the code
    Frank

  • Inserting multiple records in to database table using webdynpro abap

    Hi all,
    I have created a username inputfield,a button and a table
    with one coloumn.
    If i enter  names in the input field then the values should be
    displayed in that table.
    Even i have got the answer i am not able to insert
    the values in to database(ztable) table.
    i.e. only one value(1st) was inserted the second value was
    not inserted ....
    so kindly send me the coding to insert multiple records
    into the database table......
    by,
    ranjith

    hi Ranjith,
    If you want to insert multiple records from the webdynpro view table to database table then try the following code.
    DATA lo_nd_tablenode TYPE REF TO if_wd_context_node.
      DATA lo_el_tablenode TYPE REF TO if_wd_context_element.
      DATA ls_tablenode TYPE wd_this->element_tablenode.
      DATA it_tablenode LIKE STANDARD TABLE OF ls_tablenode.
      navigate from <CONTEXT> to <tablenode> via lead selection
      lo_nd_tablenode = wd_context->get_child_node( name = wd_this->wdctx_tablenode ).
      get element via lead selection
      lo_el_tablenode = lo_nd_tablenode->get_element(  ).
      get all declared attributes
      lo_nd_tablenode->get_static_attributes_table(
      IMPORTING
        table = it_tablenode ).
    MODIFY databasetablename FROM TABLE  it_tablenode.
    here it_tablenode is the internal table which holds the value from webdynpro view..
    Regards,
    Shamila.

  • Memory leak pulling in data from database view or database table

    Post Author: Thang Nguyen
    CA Forum: Data Integration
    Hi,
    I'm experiencing memory leaks when using DI to load from a database view or table. I have seen the issue on 11.7.2.0 and 11.7.2.2 and was wondering if anyone else has seen it.
    You can see the row count in the monitor tab going up, but with every 1000 rows it pulls in the al_engine process consumes more and more memory until it gets to 2GB and crashes with an unknown error.
    Simlir behaviour is seen in the validation transform when doing and "IN" to another table, and with table comparisons.
    I've got a webex with support tomorrow as they don't seem to belive that this happening and just want to get a heads up if anyone else was seeing this problem.
    Thanks

    Post Author: tambol
    CA Forum: Data Integration
    HI,
    i am experiencing similar error : 
    Unknown error in transform <AIView4>.
    i am using older version of BO. how could i possibly fix this without upgrading to newest version?
    please don't be too techincal when explaining...new here
    thanks a lot!

  • To fetch Data from multiple database tables!

    How to fetch Data from fields of multiple database tables!
    Give me one example!

    use <b>join....</b>
    c the SAPHELP docs...
    FROM tabref1 [INNER] JOIN tabref2 ON cond
    Effect
    The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.
    In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.
    Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:
    Table 1                      Table 2
    A
    B
    C
    D
    D
    E
    F
    G
    H
    a1
    b1
    c1
    1
    1
    e1
    f1
    g1
    h1
    a2
    b2
    c2
    1
    3
    e2
    f2
    g2
    h2
    a3
    b3
    c3
    2
    4
    e3
    f3
    g3
    h3
    a4
    b4
    c4
    3
    |--|||--|
        Inner Join
        |--||||||||--|
        | A  | B  | C  | D  | D  | E  | F  | G  | H  |
        |--||||||||--|
        | a1 | b1 | c1 | 1  | 1  | e1 | f1 | g1 | h1 |
        | a2 | b2 | c2 | 1  | 1  | e1 | f1 | g1 | h1 |
        | a4 | b4 | c4 | 3  | 3  | e2 | f2 | g2 | h2 |
        |--||||||||--|
    Example
    Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
    DATA: DATE   LIKE SFLIGHT-FLDATE,
          CARRID LIKE SFLIGHT-CARRID,
          CONNID LIKE SFLIGHT-CONNID.
    SELECT FCARRID FCONNID F~FLDATE
        INTO (CARRID, CONNID, DATE)
        FROM SFLIGHT AS F INNER JOIN SPFLI AS P
               ON FCARRID = PCARRID AND
                  FCONNID = PCONNID
        WHERE P~CITYFROM = 'FRANKFURT'
          AND P~CITYTO   = 'NEW YORK'
          AND F~FLDATE BETWEEN '20010910' AND '20010920'
          AND FSEATSOCC < FSEATSMAX.
      WRITE: / DATE, CARRID, CONNID.
    ENDSELECT.
    If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.

  • Sending data from SAP-BW ODS to R/3 database table/ view

    I need to store data in an ODS in BW from an oracle view & then send this data to SAP R/3 so that the same data can be used by SAP-ABAP for making a BDC program ( i.e. finally storing it in some database tables in R/3).
    Is it possible to do that?? if yes then how.....??

    Hi,
    Yes it is possibel.
    Use SAP PI ie XI which will send the data from BW to ur R/3 system.
    Check the links about XI.
    XI is a Integration broker. U can integrate any systems using XI.
    REDDY

  • Database table entries not getting viewed on SAP Screen

    Hi
    I have created Z-Code to update a standard SAP table.  After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
    Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
    Thanks
    Tushar

    >
    Tushar Gawande wrote:
    > Hi
    > I have created Z-Code to update a standard SAP table.  After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
    > Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
    > Thanks
    > Tushar
    /slap your hands
    You're missing some common sense and the knowledge to be tasked to do such a thing. And the person/consultant who gave you this task as well.

  • Finding source database table/column name for a column in a view

    Hi i need to be able to identify the original database table/column name for a column in a view.
    e.g. say i have a view like this
    create v1 as select a.name fname, b.name bname, c.name cname,......
    from u1.names a, u2.names b. u3.names c
    where .....
    Now I want to find out that the database table/column name for the fname, bname and cname columns in the view v1, which in this instance is u1.name.name, u2.names.name, u3.names.name.
    But i need to be able to do it for any view. Short of parsing the SQL is there an easy way of doing this?
    Now obviusly I can't do this for virtual columns but I will know my column is not virtual as it has an index on it.

    But i need to be able to do it for any view. Short of
    parsing the SQL is there an easy way of doing this?No, parsing the SQL is the only way. Good luck it is not something I would want to attempt.

  • Based on single Doc number Multiple line items update to in single Z database table

    Dear Frds,
    Based on single Doc number Multiple line items update to database table
    Example : Doc Num: Janu
    If users are using different doc number again the line items are modifying and replacing to new document Number . Pls Help me Screen attached as
    Like CS01 Transaction

    Dear Frds,
    Based on single Doc number Multiple line items update to database table
    Example : Doc Num: Janu
    If users are using different doc number again the line items are modifying and replacing to new document Number . Pls Help me Screen attached as
    Like CS01 Transaction

  • Inserting Multiple Rows into Database Table using JDBC Adapter - Efficiency

    I need to insert multiple rows into a database table using the JDBC adapter (receiver).
    I understand the traditional way of repeating the statement multiple times, each having its <access> element. However, I am just wondering whether this might be performance-inefficient, as it might insert records one by one.
    Is there a way to ensure that the records are inserted into the table as a block, rather than record-by-record?

    Hi Bhavesh/Kanwaljit,
    If we have multiple ACCESS tags then what happens is that the connection to the database is made only once. But the data is inserted row by row.
    Why i am saying this?
    If we add the following in JDBC Adapter..logSQLStatement = true. Then incase of multiple inserts we can see that there are multiple
    <i>Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','1000')
    Insert into tablename(EMP_NAME,EMP_ID) VALUES('J','2000')</i>
    Doesnt this mean that rows are inserted one by one?
    Correct me if i am wrong.
    This does not mean that the transaction is not guaranted. Either all the rows will be inserted or rolled back.
    Regards,
    Sumit

Maybe you are looking for