Database table entries not getting viewed on SAP Screen
Hi
I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
Thanks
Tushar
>
Tushar Gawande wrote:
> Hi
> I have created Z-Code to update a standard SAP table. After executing my program I can see my desired entries in that SAP database table but when I am trying to view that same entries in SPRO I am not able to view it there.
> Am I missing something? Even if my entries are coming in SAP database table do I need to do something extra to view them on SAP screen.
> Thanks
> Tushar
/slap your hands
You're missing some common sense and the knowledge to be tasked to do such a thing. And the person/consultant who gave you this task as well.
Similar Messages
-
Table entries not getting displayed in desired format
Hi All,
In my adobe layout I created a table . I used data format Align Right and align middle for the table entries. In the Output some entries of the table are not displaying in align right and align middle.
Output:In the below output the first row data is not in desired format .
Thanks in Advance,
Suneel.Uggina.That is pretty to much information to help you.
You need to share your technical setting. How did you create the table? Subforms, Table-assistent... what are the values in? Format, what happens when you also pass more than 1 digit to the numbers in the first row, does it show up correct?
So please share more details and explain exact what you have tried to fix the issue. The community is able to help you, but not meant to suggest enaything you could have done.
~Florian -
Table.Maint.Gen-- Events are only for DB tables? not for views?
Hi,
Are the events in Table.Maint.Gen only for DB tables? not for views? because I have written the logic in events of Table.Maint.Gen of a view but it is not getting executed.Hi,
1.Yes,The events are only for the Data Base tables ,not for the Views.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Regards,
Shiva Kumar -
File-to-rfc ..database tables are not updating??
hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded --------->Zrfc 0..unbouned
...id --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id ---------->Ztimeticktes-item-operation
.....closingdate ----------->Ztimeticktes-item-exec_fin_date
.....status ----------->Ztimetickets-item-fin_conf
.....comment ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
RamHi..
my mappis is like this..
message message
.message1 message1
..workorders 1..1
..order 1..unbounded -
>Zrfc 0..unbouned
...id -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id -
>Ztimeticktes-item-operation
.....closingdate -
>Ztimeticktes-item-exec_fin_date
.....status -
>Ztimetickets-item-fin_conf
.....comment -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram -
The "J2EE process table" node not visible in the SAP MMC
For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
SriniIt's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.
-
Help Pls Table is not getting created
Hi,
DECLARE
CURSOR c
IS
SELECT * FROM emp;
v_count NUMBER;
BEGIN
BEGIN
SELECT COUNT (*)
INTO V_COUNT
FROM all_tables
WHERE table_name = 'EMP_BKP';
IF V_COUNT = 0
THEN
EXECUTE IMMEDIATE 'CREATE TABLE EMP_BKP AS SELECT * FROM EMP';
ELSE
DBMS_OUTPUT.put_line ('Table already created');
END IF;
END;
BEGIN
FOR i IN c
LOOP
INSERT INTO EMP_BKP
SELECT *
FROM EMP
WHERE empno = i.empno;
END LOOP;
END;
END;
Error report:
ORA-06550: line 15, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 15, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:i don't understand why table is not getting created
Edited by: 924575 on Apr 23, 2013 12:35 PMFrank Kulash wrote:
Hi,
924575 wrote:
Hi,
DECLARE
CURSOR c
IS
SELECT * FROM emp;
v_count NUMBER;
BEGIN
BEGIN
SELECT COUNT (*)
INTO V_COUNT
FROM all_tables
WHERE table_name = 'EMP_BKP';
You probaly want to check <b>USER</b>tables, not <b>ALL</b>tables.
IF V_COUNT = 0
THEN
EXECUTE IMMEDIATE 'CREATE TABLE EMP_TEST AS SELECT * FROM EMP';Is this right: you want to create a table called emp_<b>TEST</b>, but only a table called emp_<b>BKP</b> does not already exst?
ELSE
DBMS_OUTPUT.put_line ('Table already created');
END IF;
END;
BEGIN
FOR i IN c
LOOP
INSERT INTO EMP_BKP
SELECT *
FROM EMP
WHERE empno = i.empno;
END LOOP;
END;
END;
Error report:
ORA-06550: line 15, column 13:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 15, column 1:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:i don't understand why table is not getting createdWhat are you trying to do?
Creating tables in PL/SQL is rarely a good idea.
What can't you create the table, once for all, and TRUNCATE or DELETE the rows when necessary?Frank ,
thank you so much for ur reply.
Even user_tables also not working .i modifed as EMP_BKP that also not working.
Yea. i agree. but requirement is i want to create dynamically. if same table already exists no need to create table.
modified code is
DECLARE
CURSOR c
IS
SELECT * FROM emp;
v_count NUMBER;
BEGIN
BEGIN
SELECT COUNT (*)
INTO V_COUNT
FROM user_tables
WHERE table_name = 'EMP_BKP';
IF V_COUNT = 0
THEN
EXECUTE IMMEDIATE 'CREATE TABLE EMP_BKP AS SELECT * FROM EMP';
ELSE
DBMS_OUTPUT.put_line ('Table already created');
END IF;
END;
BEGIN
FOR i IN c
LOOP
INSERT INTO EMP_BKP
SELECT *
FROM EMP
WHERE empno = i.empno;
END LOOP;
END;
END;
ORA-06550: line 24, column 22:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 24, column 10:
PL/SQL: SQL Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action: -
Form not getting displayed in sap b one
I have created a form using screen painter.But it is not getting displayed in sap b one.When I debugged the form it doesnot show any error.
Option Strict Off
Option Explicit On
Friend Class frmEmployee
Private WithEvents SBO_Application As SAPbouiCOM.Application
Private objForm As SAPbouiCOM.Form
Public Sub New()
MyBase.New()
'// set SBO_Application with an initialized application object
SetApplication()
LoadFromXML("frmEmployee.xml")
'LoadFromXML("MySimpleFormxml")
'// Get the added form object by using the form's UID
objForm = SBO_Application.Forms.Item("F_4")
'// Show the loaded Form
objForm.Visible = True
'// Saving the Form as an XML file
'// although it already exist as an XML file
'// it is good for practice
'SaveAsXML(objForm)
End Sub
Private Sub SetApplication()
'// Use an SboGuiApi object to establish connection
'// with the SAP Business One application and return an
'// initialized appliction object
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
SboGuiApi = New SAPbouiCOM.SboGuiApi
'// by following the steps specified above, the following
'// statment should be suficient for either development or run mode
sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
'// connect to a running SBO Application
SboGuiApi.Connect(sConnectionString)
'// get an initialized application object
SBO_Application = SboGuiApi.GetApplication()
End Sub
Private Sub LoadFromXML(ByRef FileName As String)
Dim oXmlDoc As Xml.XmlDocument
oXmlDoc = New Xml.XmlDocument
'// load the content of the XML File
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
oXmlDoc.Load(sPath & "\" & FileName)
'// load the form to the SBO application in one batch
SBO_Application.LoadBatchActions(oXmlDoc.InnerXml)
End Sub
Private Sub SaveAsXML(ByRef Form As SAPbouiCOM.Form)
Dim oXmlDoc As Xml.XmlDocument
Dim sXmlString As String
oXmlDoc = New Xml.XmlDocument
'// get the form as an XML string
sXmlString = Form.GetAsXML
'// load the form's XML string to the
'// XML document object
oXmlDoc.LoadXml(sXmlString)
Dim sPath As String
'sPath = IO.Directory.GetParent(Application.StartupPath).ToString
sPath = "D:\Final\Forms"
'// save the XML Document
oXmlDoc.Save((sPath & "\frmEmployee1.xml"))
End Sub
End Class -
Base table is not getting updated
Hi friends,
am trying to update the attribute18 from the per_vacancies table by adding 1 to it
when am running the concurrent program it is not updating the table
what might be the reason
this is my code
CREATE OR REPLACE PACKAGE BODY apps.update_vacancy_pkg
IS
PROCEDURE update_vacancy_prc (p_err_buf OUT VARCHAR2, p_ret_code OUT NUMBER)
IS
l_object_version_number per_vacancies.object_version_number%TYPE;
l_vacancy_id per_vacancies.vacancy_id%TYPE;
l_inv_pos_grade_warning BOOLEAN;
l_inv_job_grade_warning BOOLEAN;
l_validate NUMBER := 0;
l_assignment_changed NUMBER;
l_return_status VARCHAR2 (240);
l_openings VARCHAR2 (240);
l_err_msg VARCHAR2 (200);
l_vac_id per_vacancies.vacancy_id%TYPE;
l_attr VARCHAR2 (100);
l_attr1 VARCHAR2 (100);
l_attr2 VARCHAR2 (100);
l_attr3 VARCHAR2 (100);
l_attr4 VARCHAR2 (100);
BEGIN
BEGIN
SELECT object_version_number, attribute7, vacancy_id
INTO l_object_version_number, l_openings, l_vac_id
FROM per_vacancies
WHERE vacancy_id IN (SELECT MAX (vacancy_id)
FROM per_vacancies);
EXCEPTION
WHEN OTHERS
THEN
l_vac_id := 0;
l_openings := 0;
END;
BEGIN
SELECT MAX (attribute18)
INTO l_attr
FROM per_vacancies;
SELECT (REGEXP_SUBSTR (l_attr, '.*C'))
INTO l_attr1
FROM DUAL;
SELECT REGEXP_REPLACE (l_attr, '^.*C(.+)$', '\1')
INTO l_attr2
FROM DUAL;
SELECT TO_NUMBER (l_attr2) + 1
INTO l_attr3
FROM DUAL;
SELECT l_attr1 || l_attr3
INTO l_attr4
FROM DUAL;
EXCEPTION
WHEN OTHERS
THEN
l_attr4 := 0;
END;
l_object_version_number := 0;
l_assignment_changed := 0;
l_return_status := 0;
per_vacancy_swi.update_vacancy
(p_validate => l_validate,
p_effective_date => SYSDATE,
p_vacancy_id => l_vac_id,
p_object_version_number => l_object_version_number,
p_number_of_openings => l_openings,
p_budget_measurement_value => l_openings,
p_attribute18 => l_attr4,
p_assignment_changed => l_assignment_changed,
p_return_status => l_return_status
COMMIT;
fnd_file.put_line (fnd_file.LOG, 'Executed Vacancy' || l_vac_id);
fnd_file.put_line (fnd_file.LOG,
'Assignment chaged = ' || l_assignment_changed
fnd_file.put_line (fnd_file.LOG, 'Return Status = ' || l_return_status);
fnd_file.put_line (fnd_file.LOG, 'l_attr4= ' || l_attr4);
END;
END;
it is hsowing in the log file with 1 added to the attribute18
but the table is not getting updated
can some one of you suggest a solution pls
thanks
Edited by: 776317 on Apr 27, 2011 9:15 PM
Edited by: 776317 on Apr 27, 2011 10:01 PMbut how come the seeded api has this
PROCEDURE update_vacancy
(p_validate in number default hr_api.g_false_num
,p_effective_date in date
,p_vacancy_id in number
,p_attribute17 in varchar2 default hr_api.g_varchar2
,p_attribute18 in varchar2 default hr_api.g_varchar2
.);Enable trace/debug, this may give you an idea about the data which is not saved.
Thanks,
Hussein -
Steps to follow while creating Database table in notes or paperwork
what are the steps to follow while creating Database table in notes or paperwork
Thank you,
Regards,
Jagrut Bharatkumar Shuklahi,
1. Goto Transaction SE11.
2. Enter the table name to be created. It should start with a Y or Z.
3. Press Create
4. Enter the Short description for the table
5. Enter the Delivery class for the table. It can be 'A', 'C' or other.
6. In the Fields tab, specify the table fields and the corresponding data elements or the built-in data types.
7. If the table needs to be made a client-depenedent table, the first field should be MANDT.
8. Goto Technical settings of the table and sepcify the Data Class and Size for the table. Also, there u can specify if buffering for the table should be allowed or not.
9. Now, activate the table.
if helpful reward some points.
with regards,
Suresh Aluri. -
STDMES field in EDI _DC40 value is not getting reflected in SAP R/3
Hi All,
We have a EDI to IDOC scenario.
In message mapping we are hardcoding EDI_DC40\STDMES = 812 in message mapping and in sxmb_moni in PI we can see this value getting populated in xml message but at SAP end in we02 it is blank.
Value is not getting populated in SAP.
Could you please provide inputs on this?
Thanks in Advance
Best Regards,
Harleen Kaur ChadhaHi Harleen,
Please check Note SAP Note Number: 1331571 : IDoc adapter: Value STDMES is ignored
Regards,
Vikrant -
Custom Table Entry not in Sync between Different Environment
Hi All,
we have different environment like Dev System, Quality system, performance testing system etc... these are all environment customs table entry not in syn .. Table entry should be syn. How to make it syn all the entry between all environment without do any manual work. Kindly help on this.
ThanksHello Mohammed,
It depends on what type of tables you are referring to. If you have a table of type 'Customizing', you have to transport your table entries across different environments and they will be in Sync.
If you are referring to tables of type 'Master Data', they have to be maintained in all environments.
Table of type 'Transaction Data' by default have different records based on your day to day transactions.
You cannot have all custom tables with same data in all environments. Hope this helps.
Rgds,
Vijay. -
Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?
Did you check the Zoom setting?
Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings -
Iam not getting the data on screen after using the user exit zxpadu01
Dear Freinds
As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.Hi Pranesh,
i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti. -
hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharanWelcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html -
Trying to install VM Server and not getting the CD found screen to display
Trying to install Oracle VM Server from a CDROM:
1. Insert the Oracle VM Server CDROM into your CDROM drive.
2. Boot the computer with the Oracle VM Server CDROM.
3. The Oracle VM Server screen is displayed.
All that went fine but not getting the CD found screen to display. Instead it says the device wasn't found and shows a list of drivers, none of which seem to match the CD drive. Anyone have any ideas? There is an option to point it to a driver disk, not sure if I need to get the driver from somewhere and do that or not?
machine is Dell Optiplex 760
CD RW\DVD RW driveTry changing the SATA mode in the BIOS to AHCI.
Maybe you are looking for
-
IFRIC 1 in IFRS ---- Is it possible in SAP to discount a liability figure
Hi All, As per IFRIC 1 in IFRS: To measure decommissioning provision, the periodic unwinding of discounting shall be recognised in income statement as finance cost as it occurs. Is it possible in SAP to discount a liability figure and charge to inter
-
COLOR vs FCP - three-way color corrector adequate?
The route between FCP and Color doesn't always seem to be entirely smooth. I've realised I can get very similiar grades with the FCP color corrector. Obviously, I don't have the scopes and displays. But I can do pretty well 'by eye'... I assume for b
-
Multi value selection for characteristics under class type 200
Hello Experts, Please suggest I am trying to assign a class type 200 to the material master of a component say ABC. While selecting the values for chars under classification I need to select more than one value for a characteristics say XYZ(single va
-
Share Airport Disk over WAN via iCloud
Does anyone have info on how 7.6.1 allows WAN access via an iCloud account? Supposedly that was a new feature and I can't find anything about it. Sorry for everyone's frustrations. My 7.6.1 update went fine on two Extremes & an Express. 7.5.2 was
-
[help] CD Label Printer?
Hey guys, I don't know if this is the right forum to post this question in, and I've looked for the right one but can't seem to find it. Anyway, I'm thinking about purchasing a printer for myself to use with my brand new 20" iMac 2.1ghz that I'm gett