View for "create directory"

Hi
Is there a dictonary view where i can find all the "virtual directory" which are created with the "create directory" command ??
Thanks.

ah.. :)
So I should add, that in general those view names are "plurals" (ending with an S), e.g. dba | all | user _ objects, tables, tab_columns, indexes, synonyms, triggers, sequences, users, and so on.
(And the v$ dynamic/stats view names are often in singular, like v$metric, process, session, datafile, tablespace - but this "rule" seem to be deteriorating with new views added).

Similar Messages

Which method is right for creating directory

Hi all
whenever we create directory for oracle 11g during installtion
we have two method from documents
which method is right
Create the directories in which the Oracle software will be installed:
mkdir -p /u01/app/oracle/product/11.1.0/db_1
chown -R oracle:oinstall /u01
chmod -R 775 /u01
or
Create the directories in which the Oracle software will be installed:
mkdir -p /u01/app/oracle
chown -R oracle:oinstall /u01
chmod -R 775 /u01

ORACLE_BASE is a base directory which is owned by oracle user. The software itself is installed in ORACLE_HOME. When you create ORACLE_HOME it creates you also ORACLE_BASE. That's the way to go. If you don't have ORACLE_HOME created Oracle Universal Installer might complain or fail.

Create directory error on a VMS system

Ok, I am trying to load some date into a CLOB field within a small table I have created. Here is how I attempted to accomplish this and the result (and to add insult to injury, it is on a VMS system!):
CREATE TABLE js_holder (
js_name varchar(30),
js_body CLOB );
CREATE DIRECTORY foos as 'USR$DISK:[CLEMENSD.SQL_EDIT]';
CREATE OR REPLACE PROCEDURE Load_CLOB IS
dest_clob CLOB;
in_file BFILE := BFILENAME('foos', 'supernote.js');
dst_offset number := 1 ;
src_offset number := 1 ;
lang_ctx number := DBMS_LOB.DEFAULT_LANG_CTX;
warning number;
BEGIN
DBMS_OUTPUT.ENABLE(100000);
INSERT INTO js_holder(js_name, js_body)
VALUES('supernote', empty_clob())
RETURNING js_body INTO dest_clob;
DBMS_LOB.OPEN(in_file, DBMS_LOB.LOB_READONLY);
DBMS_LOB.LoadCLOBFromFile(
DEST_LOB => dest_clob,
SRC_BFILE => in_file,
AMOUNT => DBMS_LOB.GETLENGTH(in_file),
DEST_OFFSET => dst_offset ,
SRC_OFFSET => src_offset,
BFILE_CSID => DBMS_LOB.DEFAULT_CSID,
LANG_CONTEXT => lang_ctx,
WARNING => warning );
DBMS_LOB.CLOSE(in_file);
COMMIT;
DBMS_OUTPUT.PUT_LINE('Loaded File using DBMS_LOB.LoadCLOBFromFile.');
END;
then the following:
SQL> set serveroutput on
SQL> exec Load_CLOB
SQL> exec load_clob
BEGIN load_clob; END;
ERROR at line 1:
ORA-22285: non-existent directory or file for FILEOPEN operation
ORA-06512: at "SYS.DBMS_LOB", line 672
ORA-06512: at "BANINST1.LOAD_CLOB", line 13
ORA-06512: at line 1
SQL>

Wow you've sure got a lot of threads going on this one (Ok Waz zup? and VMS, create directory and the chamber of secrets
My first question is have you checked to ensure that the file and directory permissions will allow oracle to read the file you want? Have you tried dumping your supernote.js file in the jobsub directory, or chaning it's (and/or the directories) protections?
From the documentation for create directory: "Oracle Database does not verify that the directory you specify actually exists. Therefore, take care that you specify a valid directory in your operating system. In addition, if your operating system uses case-sensitive path names, be sure you specify the directory in the correct format."

Create a Maintenance view for table T500P

Hi Experts,
We have a requirement where customer want an additional field in table T500P and for the same a custom maintenanve view has to be created.Moreover, If there is any update insert or change in the ZView/Ztable the same should be reflected in standard table T500P.
Steps already taken :-
We have created a ztable (copy of T500P ) and add the required custom field to it.
We have also copied the view i.e V_T500P to our custom view and also use base table as T500P .
We also create a foreign key for PERSA in Ztable and use T500P as check table for that with cardinality 1:1.
To update the MOLGA & BUKRS field data in ztable we have set both the field as a primary key & create a foreign key with check table T500L & T001 & cardianality as 1:CN for key fields.
In custom maintenance view we have set the realtionship of ztable t500l & t001 with the base table T500P.
Now, if we are trying to maintain the view only T500P table is getting updated and Ztable is updated with only PERSA value.
Please provide some directions for the resolution of this issue.
Thanks,
Pooja Goel.

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

Do I need to create a view for this?

Hi Ihave got 2 tables emp and project
In emp tabe:
emp_no
family name
given name
In porgect table:
emp_no
status(assigned,unassigned)
start_date
end_date
emp_no Family_name given_name
1 Smith John
In project table same employee can have many assigement eg
emp_no status start_date end_date
1 assigned 01-may-08 01-july-08
1 assigned 01-sep-08 01-july-09
1 unassigned 01-july-09 01-oct-09
In the form:
there are 2 querable fields "project ends between field1(date) and field2(date)" which is used to
retrive records which have end date between field1 and field2.
The following fields are needed to get from database:
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Requirements:
1. project.start_date and project.end_date must be the latest project_end_date for the same emp
so in the above sample date
2. No. of time assigned is a count of total of number records which have status='assign'
So for the given sample data the record expected after query would be(field1=01-jun-08 field2=02-july-09)
emp.family_name emp.given_name project.start_date project.end_date No.of time assigned
Smith John 01-sep-08 01-july-09 2
What is the best approach to get:
1 The lastest project(latest end_date) for the emp
2. get No.of time assigned.
Do I need to create a view for this? If yes, any sample sql code this this?
Thanks for your help

Hi W1zard,
Thanks for your reply. Could you clarify the following points for me:
1.) you could create a master block basing on your emp table and a detail block basing on your project table with the relation over emp_no. set the default_where clause of your detail block programmatically using
set_block_property('project', default_where, 'status = ''assigned'' and <your_date_criteria>');
Q1: where I pit this code? in pre-query trigger in detail block?
2.) Of course you could create a view to join both of your tables if you don't want to use master detail blocks; Also do the join over emp_no
create or replace force view v_emp as
select emp.family_name, emp.given_name, project.start_date, project.end_date
from emp, project
where emp.emp_no = project.emp_no
Q2 As I mentioned before, there are multipal entries for the same emp in project table and we only need the maching record from project table which has latest end_date. So I think I need something like
max(project.end_date) somewhere in create view to make sure only one record for one employee.
Also is there possible to include the no. of assigned field(select count(*) from project where status='assigned' and emp=emp_no) into the view as well?
Q3 All the fields mentioned above are diaplay-only. So Can I create a control block which has all the fields from emp and project. Then populate them with my sql. The question is
where I put this customerised sql so when user click excute query. My sql will run and display one the form?
REally appreciated your help!
Michael

How to create a maintainance view for a table.

Hi All,
Can anyone explain me how do we create a maintainance view for a table?
Also, what access is required to create the view.
Is it true that for SAP tables we cannot create a maintainance view?
Appreciate any help on this.

Hi
Can anyone explain me how do we create a maintainance view for a table?

You can use the SE11 menu option 'Utilities-->Table Maintenance Generator' or you can use transaction SE54.
also check
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/38/81c1351181b73fe10000009b38f839/frameset.htm
Regards
krishna
Note: Award Points if helpful. Thanks

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

Need to create maintenance view for a custom infotype

A custom infotype 90XX is created. The data cannot be modified or created through PA30 in this infotype. Through PA 40 actions only we can create/change the record/data. We have created some 1000 records in it. Now can we create a maintenance view for the infotype so that we can create, delete or change the data in the infotype as and when we want.

Hi,
pls chk dat u have maintained the 'Infotype Charecteristics' and 'Technical Attributes' correctly.
thanks,
teja.

How to create a special view for sharepoint list A and deploy this view to specific user personal view?

How to create a public view for sharepoint list A and deploy this view to specific user personal view? Is that possible OOTB?

Views cannot be exported or moved. Can you elaborate your requirement?
--Cheers

Create a defaut view for the MS Project Server 2010 client

Dear Forum,
how can I create a defaut view for the MS Project Server 2010 client?
I saved a template and set a default view under File -> Options ->Project View. I also did the same in the checked-out enterprise global. If I then close the client and re-open it my default view changes back again to the previous one (not the view
I set as a default view).
What explains this behaviour and what can I do? Any hints?
Thank you very much for your help!

Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP]

Creating a materialized view for another user

I don't seem to find the correct setup for this....
With the user "dummy"
CREATE MATERIALIZED VIEW dummy.thetable BUILD IMMEDIATE REFRESH FORCE ON DEMAND AS select * from real.thetable;
And the materialized view is created ok.
With a DBA user:
CREATE MATERIALIZED VIEW dummy.thetable BUILD IMMEDIATE REFRESH FORCE ON DEMAND AS select * from real.thetable;
ORA-01031: insufficient privileges
I don't want to be switching back and forth from the user to create materialized views, am I missing a permission here? DBA of course has create any materialized view

From the SQL Reference Guide:
To create a materialized view in another user’s schema:
- You must have the CREATE ANY MATERIALIZED VIEW system privilege.
- The owner of the materialized view must have the CREATE TABLE system privilege. The owner must also have access to any master tables of the materialized view that the schema owner does not own (for example, if the master tables are on a remote database), and to any materialized view logs defined on those master tables, either through a SELECT object privilege on each of the tables or through the SELECT ANY TABLE system privilege.
I suspect that, if you first GRANT CREATE TABLE TO DUMMY, you will be able to create the MV.

Creating 'Z' views for Standard ABAP Web dynpro Application

Hi Experts,
I am totaly new to ABAP web dynpro objects.
In our project there were some client requirements which required us to change the properties of the Views related to the Webdynpro. The Client now has said that he needs to apply some enhancement pathces on his system. Due to this, the changes made to the Views i.e all the changes done in standard code are lost.
The client now wants a long term solution where all the changes need to be done in 'Z' implimentataion so that changes are not lost every time the pathces are applied.
Is it possible to create an entire new 'Z' Views for the standard Webdynpro instead of standrad ones?
If Yes how does one link them to the Webdynpro application ?

Hi
Have a look at following article about enhancing webdynpro applications.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81?quicklink=index&overridelayout=true
Regards
Manas Dua

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

Creating View for a table with parent child relation in table

I need help creating a view. It is on a base table which is a metadata table.It is usinf parent child relationship. There are four types of objects, Job, Workflow, Dataflow and ABAP dataflow. Job would be the root parent everytime. I have saved all the jobs
of the project in another table TABLE_JOB with column name JOB_NAME. Query should iteratively start from the job and search all the child nodes and then display all child with the job name. Attached are the images of base table data and expected view data
and also the excel sheet with data.Picture 1 is the sample data in base table. Picture 2 is data in the view.
Base Table
PARENT_OBJ
PAREBT_OBJ_TYPE
DESCEN_OBJ
DESCEN_OBJ_TYPE
JOB_A
JOB
WF_1
WORKFLOW
JOB_A
JOB
DF_1
DATAFLOW
WF_1
WORKFLOW
DF_2
DATAFLOW
DF_1
DATAFLOW
ADF_1
ADF
JOB_B
JOB
WF_2
WORKFLOW
JOB_B
JOB
WF_3
WORKFLOW
WF_2
WORKFLOW
DF_3
DATAFLOW
WF_3
WORKFLOW
DF_4
DATAFLOW
DF_4
DATAFLOW
ADF_2
ADF
View
Job_Name
Flow_Name
Flow_Type
Job_A
WF_1
WORKFLOW
Job_A
DF_1
DATAFLOW
Job_A
DF_2
DATAFLOW
Job_A
ADF_1
ADF
Job_B
WF_2
WORKFLOW
Job_B
WF_3
WORKFLOW
Job_B
DF_3
DATAFLOW
Job_B
DF_4
DATAFLOW
Job_B
ADF_2
ADF
I implemented the same in oracle using CONNECT_BY_ROOT and START WITH.
Regards,
Megha

I think what you need is recursive CTE
Consider your table below
create table basetable
(PARENT_OBJ varchar(10),
PAREBT_OBJ_TYPE varchar(10),
DESCEN_OBJ varchar(10),DESCEN_OBJ_TYPE varchar(10))
INSERT basetable(PARENT_OBJ,PAREBT_OBJ_TYPE,DESCEN_OBJ,DESCEN_OBJ_TYPE)
VALUES('JOB_A','JOB','WF_1','WORKFLOW'),
('JOB_A','JOB','DF_1','DATAFLOW'),
('WF_1','WORKFLOW','DF_2','DATAFLOW'),
('DF_1','DATAFLOW','ADF_1','ADF'),
('JOB_B','JOB','WF_2','WORKFLOW'),
('JOB_B','JOB','WF_3','WORKFLOW'),
('WF_2','WORKFLOW','DF_3','DATAFLOW'),
('WF_3','WORKFLOW','DF_4','DATAFLOW'),
('DF_4','DATAFLOW','ADF_2','ADF')
ie first create a UDF like below to get hierarchy recursively
CREATE FUNCTION GetHierarchy
@Object varchar(10)
RETURNS @RESULTS table
PARENT_OBJ varchar(10),
DESCEN_OBJ varchar(10),
DESCEN_OBJ_TYPE varchar(10)
AS
BEGIN
;With CTE
AS
SELECT PARENT_OBJ,DESCEN_OBJ,DESCEN_OBJ_TYPE
FROM basetable
WHERE PARENT_OBJ = @Object
UNION ALL
SELECT b.PARENT_OBJ,b.DESCEN_OBJ,b.DESCEN_OBJ_TYPE
FROM CTE c
JOIN basetable b
ON b.PARENT_OBJ = c.DESCEN_OBJ
INSERT @RESULTS
SELECT @Object,DESCEN_OBJ,DESCEN_OBJ_TYPE
FROM CTE
OPTION (MAXRECURSION 0)
RETURN
END
Then you can invoke it as below
SELECT * FROM dbo.GetHierarchy('JOB_A')
Now you need to use this for every parent obj (start obj) in view
for that create view as below
CREATE VIEW vw_Table
AS
SELECT f.*
FROM (SELECT DISTINCT PARENT_OBJ FROM basetable r
WHERE NOT EXISTS (SELECT 1
FROM basetable WHERE DESCEN_OBJ = r.PARENT_OBJ)
)b
CROSS APPLY dbo.GetHierarchy(b.PARENT_OBJ) f
GO
This will make sure it will give full hieraracy for each start object
Now just call view as below and see the output
SELECT * FROM vw_table
Output
PARENT_OBJ DESCEN_OBJ DESCEN_OBJ_TYPE
JOB_A WF_1 WORKFLOW
JOB_A DF_1 DATAFLOW
JOB_A ADF_1 ADF
JOB_A DF_2 DATAFLOW
JOB_B WF_2 WORKFLOW
JOB_B WF_3 WORKFLOW
JOB_B DF_4 DATAFLOW
JOB_B ADF_2 ADF
JOB_B DF_3 DATAFLOW
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

View for "create directory"

Similar Messages

Maybe you are looking for