View One Page at 100% in Word 2010 by default

I have a user whos view by default is to view 2 pages when at 100% zoom. I can change her view by going to View - Zoom - Zoom- then Zoom to 100% and then seleting page width which works great that time, but when she closes that document and brings up that
document again or another document it by default opens that document with the 2 pages at 100% zoom again. So my question is how do I make it so that by default it open every document this way. These documents she is opening are shared documents
and I have opened them on my PC and they open to the one page at 100% zoom, so it must be a setting on her PC. Any advice to fix this issue would be greatly appreciated.

This is a result of the aspect ratio of the monitor. At 100%, by default Word will display 1 page on a 4:3 monitor and 2 pages on a 16:9 monitor. I find the 2-page spread to be more productive, but if it must only display 1 page, Stefan's macro at the link
he included will do the trick.
For new documents only, here's an undocumented trick that will work.
Close all other documents and open Normal.dotm. This is usually found in C:\Users\YourUserName\AppData\Roaming\Microsoft\Templates and AppData is normally a hidden folder.
Set your preferred view. Then make a small change to the file, like typing a space character.
Save.
Delete the space character.
Save again.
All newly-created documents will open at the View settings you used to save the Normal template.

Similar Messages

Question: Viewing one page at a time

How do I change from viewing a spread as two pages to just viewing one page at a time?

If the doc is set up with spreads then turning spreads off may change the structure of a document. Or, at least, it did back in CS4 when I turned spreads off to look at a document in single-page layout because I was working on a laptop. When I turned spreads back on, lots of features (like anchored objects or text wraps set up to align to spine or "outside edge" for example) were broken.
I never researched any further - I simply got in the habit of exporting PDFs and viewing those in single-page mode, instead of trying to affect layout in InDesign. Maybe this isn't broken anymore, or perhaps there's a non-destructive method of getting a single-page view. Or, more importantly, maybe the document you're looking at doesn't have any of these spread-dependent features. Or maybe you dont need it to keep the spreads features. Anyway, be aware that you might lose something if you untick that box.

Adobe Acrobat 9 Pro adding a blank page on conversion from Word 2010

Hi, I'm hoping someone here can help. I'm converting a Word 2010 document to PDF using Adobe Acrobat 9 Pro (version 9.5.4). On conversion to PDF, a blank page is being added, throwing the entire report off. In word, there is a Section Break (Next Page) at the end of the first page, and the text continues on the second. On conversion, it is after this section break that the blank page apears (i.e., between pages 1 and 2 of the document). I've been back and forth through the document, tried to use a Continuous Section Break instead (Word just converts it to a page break again), making sure there's only one break, etc., and cannot for the life of me figure out how to fix this problem. Any ideas?
Thanks

Hello,
I'm sorry you're having trouble with Acrobat. Unfortunately,
these forums are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the Acrobat family of desktop products.
Any questions related to the Acrobat family of desktop
products would be best suited in the Acrobat Forums:
Link to
Acrobat Forums
Thanks!
Michelle

Prior to updating the iphone 5 to ios.7, i used to be able to go to Notes and scroll through all listings until I found what I wanted. Now i am only able to view one page at a time and have to back and forth between the main menu and each page. Help?

Prior to updating my iPhone5 to the "new and improved" ios.7, I used to be able to go to my Notes app and scroll through the various categories until I found the item I was looking for. Now, under the "improvements" I have to open each page, one at a time, until I find the desired category. This strikes me as a big step backword. Any solutions in the community?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

Can I make Pages save docs as Word docs by default?

I am on Mavericks and Pages 5.0. I notice that even the check box is gone in the Save panel and there is now no Save As option.
All searches resulted in older posts.
I don't want to buy Word or futz with Open Office. It seems everyone I interact with has to have the Word format.
Thanks,
Don

>Too cheap for Office, right?
Well, not really. I have Pages, I'd like to use it, seems like a fine program. I would prefer not to feed the MS machine. I'll try LibreOffice. I'll end up buying Office if I have to, though it seems like a waste.
As best I can tell, the Option Save As route doesn't give me the opportunity to save to a Word format. Before Mavericks/Pages 5, there was a check box at the bottom of the Save panel that would allow me to do that (though not as a default). Since I updated, that check box is no longer apprearing.

One page turn out to be 4 pages in crystal report viewer, Bug?

we are using crystalReports xi release 2, visual studio 2005,IIS in windows 2003 and asp.net. We have one crystal report viewer in web page to dispaly one report, It has been running properly for several months in production server. Now we run into big issues. In report Views, one page report always turn into 4 small size pages. When we test it in visual studio 2005, it still works correctly without any problem. Even we unstalled IIS and reinstalled IIS, deployed web again, the problem is still there. It is very strange and frustrating to developer! Now we are afraid of handling crystal report, which seem arise many potential unexpected issue down the road. any clue?
the following is source got from IE browser, height for Viewer1 is only 367px,
normal value is 1039px,That is reason why page seems significantly shorter.How can we control the height? Even specifing size in css, it just be ignored.
LINK rel="stylesheet" type="text/css" aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"><table id="CrystalReportViewer1" align="center" cellpadding="0" cellspacing="0" style="display:inline-block;border-style:Solid;height:367px;width:149px;">
style="width: 149px; height: 367px;position:relative"
Thanks in advanced.
Jim

Hi Rizwan,
You can't with the report itself because once the refresh is complete it requires a full refresh to update any page. And there is no option to for example refresh just the subreport.
RAS SDK has samples on how to add subreports, see the OverView tab for a link to the samples, but it still requires a refresh to be called.
One way may be to use Subreports on Demand, URL's to another report.... Each subreport would run individually without refreshing the main report. It would like a Table Of Contents report though.
So to be clear, adding pages is the same thing as adding more data. Problem is most of the data needs to be complete so that summaries and running totals etc. type of objects require the data to be complete to be able to render each page.
So why do you need to do this? Can you explain your workflow?
Don

Can I view a single page of a document, previously created in Microsoft Word, in its entirety on the screen (ipad or iphone) without having to drag the page, i.e. one page per screen?

Looking to choose an app for viewing word documents, but need to be able to view a complete page per screen (preferably full screen) without having to 'nudge' the screen 'up' to view the bottom of the page.
Will Pages do the job?

Not exactly.
You will find yourself nudging the page up or down a bit. Earlier versions of iOS Pages allowed "full page view" but that really wasn't full page either. You can squeeze the view to fit, but as soon as you release it, the document springs back to normal size - it is only about a line off from what you are looking for.
An alternative would be to view a Pages Document as a PDF and view the PDF in an app such as GoodReader - there you can see both the top and bottom edges of each page. There are many other PDF viewers available in the App Store.
Hope this helps.

Can't open Pages files from iPad in Word 2010 on PC

I have not been able to open any files created on my iPad (iOS 6.0.1) with Apple Pages in Microsoft Word 2010 on Windows XP Pro and hope someone can suggest a solution.
I am emailing the files as attachments (.docx files) When I try to open the file on my PC, I get an error message when I open them in Word that says:
Word was unable to read this docuemnt.
Try one or more of the following:
* Open and repair the file.
* Open the file with the Text Recovery converter. (C:\Users\...\name of file.doc)
In addition, I tried to open the .docx file in Openoffice.org 3.4.1 and it got a read error.
Any suggestions? Is there any kind of plug-in/add-in for MS Word 2010 that would correct the problem?
Thanks,
Rich
Additional: Pages was purchased today from the App store; iPad is Gen4 a couple days old

So...I have played with it more. Simple documents work most of the time. But if I take a more complex doc to Pages, edit it and save it as a Word doc then trasnfer it back to PC or Mac it will fail to open.
Would be nice if I could trust the App. WIll mess more with it but it is very frustrating.
Rich

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but worked only in Mail. Lost formatting when just copied and pasted in email.

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but PDF worked only in Mail. Word worked in nothing. I also tried copying and pasting the document but lost all formatting when just copied and pasted in email. Is there a way to do this?

Are you sure PDF won't work? It should as what you're trying to do is pretty much what it is designed for (PDF - Portable Document Format). On a Mac anywone who receives the file should be able to see it in all its page layout glory by using the app Preview or Adobe Reader. Same on a PC, the file should be viewable as a PDF file using Adobe Reader and probably some other viewer (don't use PCs so not sure what other apps).
What application are you creating the file in and are you sure you're exporting it correctly in PDF format, fonts and images embedded?

When I save a Word 2010 doc as a pdf file, it opens up in Adobe Reader as a blank page, no text, no background etc.

When I save a Word 2010 doc as a pdf file, it opens up in Adobe Reader as a blank page, no text, no background etc. I am logged on as the Administrator, running Windows 7, using Microsoft Home and Business 2010.

You were right, it was a Microsoft problem.
I got it...I am now able to save a Word 2010 document as a pdf file. Here is what I did/found:
In Word, go to File, Options, Display and make sure that "Print drawing created in word" is CHECKED.
Mine was unchecked and when I checked it everything came back and is working as it did before. The only thing I can think of is that a Microsoft Update may have changed this selection...I know I DID NOT make any changes in the options.
One other thing I noticed in my saved documents folders was that a lot of my files showed up as PDF's and would still not open until I selected one and told it to default to open as a word document and then they all changed back and I was able to open them in word again.
I hope this helps others out there.

Word 2010 Field Code makes page header disappear

Hi,
I am working on converting some word 2003 documents to Word 2010, but we found that the behavior of field code seems different in word 2010. We use field codes in a page to embed postscript command such that printer can pick up a correct paper tray. The
command is like this:
PRINT \p page "grestore matrix currentmatrix <</MediaType (NORM) /MediaColor (white)>>setpagedevice setmatrix gsave" \* MERGEFORMAT
But I found that when there is a field code on the top of a page and the page has header defined on it, the header will not be printed out, just like the field code "kick out" the header. I try the word advance option "Print PostScrit over
text" but it does not work, If use this option, the field code seems occupy one row and the entire content will roll over more than 1 page.
Does any professional encounter this problem? Any solution can be shared with me?
Many thanks for your advice,
Ray

Hi
Based on our test, this may be a by-designed feature. If you want more details, you may select Microsoft Advisory Services option. For specific information about the types of Advisory Services available, visit the
http://support.microsoft.com/gp/advisoryservice web page.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"
Hi George,
That means you can reproduce our problem in your testing?
Thanks,
Ray

MS Word 2010 will not display in Layout view

In a nutshell, Word appears to be not so much stuck in "Draft" view but will not show Print Layout view at all. I am writing a manual which includes many embedded images, charts, and the like, so all of the editing has been done thus far in Layout
View. At this point my project is effectively paralyzed; perhaps if I uninstall Word 2010 and return to a version that worked?

"GSHancock" wrote in message news:[email protected]...
Unfortunately the document is a section from an unpublished game manual, and falls under "sensitive" in its entirety. However, I will share this experiment with you; I deleted the entire manual's text and wrote a few lines, then saved the document. When
I loaded it again, it came up in Layout View... so the problem may lie somewhere in the formatting of one of the section breaks? Weirdest thing.
OK, I see why you can’t share the content. :-)
Your observation does suggest a formatting problem. Continuing on that idea, working with a copy on the original document of course, you could split the document in halves (via Save As); then see which half shows symptoms of the problem. Split the problem
document again, and again, until you have isolated the problem.
Alternatively, if you want a quicker fix, the following would be worth trying: Delete all section breaks and then copy the content, minus the final paragraph mark (¶), into a new document.
To show/hide nonprinting marks, including paragraph marks, click the ¶ button on the Home tab.
Stefan Blom, Microsoft Word MVP

HP laserjet 400 M401 dne will not work with Word 2010 paper source other pages

HP laserjet 400 M401 dne connected via USB to Dell 980 with Windows 8.1 (64 bit) using HP laserjet 400M401 PCL 6 class driver. In Word 2010 Go to print settings and paper tab. The printer has two trays set first page option to one tray and "other pages" to the other tray and it will always print all pages to the first page option. All paper tray settings on the printer to automatic and letter and plain. If set the printer setting to tray 2 and the word setting for other pages to tray 1 that does not help either. Unable to find a setting scenario where the other pages will print to another tray.

Hi Travis,
This sounds more like a Graphic Driver or Graphics Card problem. You might try switching out the Graphic Card if that is possible on the system.
Another outside possibility might be a corrupt user profile, so you could create a different profile on the machine and try it. However, my guess would be the Graphics Card is failing.
Are you also certain there are no other Office add-ins loaded that might be causing this. Start Word in Safe Mode and see if this clears the problem. If it does, then systematically disable add-ins one at a time until the culprit is found.
Hope this helps
Kind Regards, Rich ... http://greatcirclelearning.com

Bug report: apex_item.date_popup2 more then 100 on one page

Description:
When you use function
apex_item.date_popup2
without setting parameter
P_ITEM_ID
, only 100 datepickers can be initialized at the same time on the one page.
Reason:
The reason is in using
LPAD
on some global popup2 counter.
Workaround:
Set mentioned parameter with the value.
For example, in select query of the reports region:
apex_item.date_popup2(1, t.some_date, p_item_id => 'popup2-workaround-'||rownum)
Actual version:
Application Express 4.2.2.00.11 and all below.

Andy,
Apologies for the late reply - Forums have been out for a while :-(
Thanks for the suggestion. I've had a look at Denes' example and
at least now I know it is possible.
I've asked for access to his workspace but have not been given that
yet so can't look at the details yet but I can make some educated
guesses as to how it was done.
I will give it a try.
I'm still not certain whether having 2 updatable tabular reports is the
right way to go though....
Currently I'm working on a page with 2 navigator reports - one for selecting
the object and another to select the start date of the timestamped attributes.
Next to that I have an updatable detail form that shows the selected object
and attributes as one whole set using the joined view I mentioned earlier.
Inserts, updates & deletes are then done in the form.
Ruud.

Can't print a one page month view using ical 3.0.1

I can't seem to print a page view of a month using ical 3.0.1- the newest with Leopard. When you go to the print window, view only gives me day or list as a choice. There isn't a monthly option like in the support quides for ical 2.0. Has anyone had any luck printing a month on one page since upgrading to leopard?

I don't think you can do that in a direct way, although you could create a calendar, and move the event you want printed to that calendar, then go to print, select list and then only select that calendar and you will only print that event you wanted to print.
hope this helps

View One Page at 100% in Word 2010 by default

Similar Messages

Maybe you are looking for