View related services for Dictionaries

View related services for Dictionaries
It would be handy to see what services are using a dictionary when you're considering changing the dictionary - to prevent loss of services.  Occassionally changes are required and if you have a lot of services, it can get pretty difficult to manage.

There is a built in report in the reporting module called "Services By Dictionary" (Service Design Details group) that will give you what you're looking for.  I agree though that it would be handy to have this built into Service Designer the same way it is for keywords, scripts, etc.

Similar Messages

  • CRM Related Questions for Configuring Service Desk in Solution Manager

    Hi All,
    We have 3 requirements while configuring service desk in solution manager:
    1) Is there any possibility that we can restrict view of messages in solman for different teams. E.g: Finance Support team should not view message raised for Material Management Team ?
    2) Is there any possibility in service desk that we can assign message on the basis of location e.g: message raised for finance from location A should go to different support team of finance and for location B, it should go to different finance team ?
    3) Is there any possibility that we can make some question necessary while user is raising very high priority message from satellite system e.g: when we raise Very high priority message on service market place, we need to answer few mandatory questions ?
    I tried to search these functionality in standard scenario but I am not able to find something relevant. Please suggest.
    Thanks
    Sunny

    Hi Rama,
    I Need to configure the feature to generate a ticket to SAP directly in VERY HIGH priority.
    Could you please help me out into this. If you have any doc related to that Please send me.
    Thanks in Advance!
    Regards,
    Prabhat Singh

  • Error in self service for my employee - Related Activities in MSS

    Hi,
    NW2004s SP9  EP7.0 ECC 6.0
    we are trying to implement the self service for my employee in related activites functinality from the general information of team workset ( Team --> General informatio --> Related activities --> Self service for my employee ) in MSS which is a replicaiton of ESS in MSS functionality from the previous versions.
    When
    I click on any of the options like Personal data or Addresses it gives me a blank page with no information on it. (It does give a DONE message with error/warning message on the status bar of Internet explorer. The error message says getactivetrackingEntryValue() is null)
    Do I need to do anything to get this page working. I do not see any config related to this.
    Appreciate any inputs.
    regards
    sam

    James,
    I think the note refers to note been able to display the general infromation iView itself. I have implemented the note and am able to see the genral information iView. My issue is I am not able to perform "Self service for my employees" in "related activities" iView.
    Thank for you reply and correct me if I am wrong.
    Sanjay, I have raised the issue with SAP, in the mean while if you can please let me know the patches or a list of them that are requried thyat would be awesome. Sorry for asking you this, but the basis team here asks to tell them what is requried even though I do not have sufficient authorizations to check them.
    Appreciate you help on the same.
    regards
    Sam

  • View workflow logs in services for object tab in transaction

    HI All ,
    Is there any settings that need to be done to see the workflow associated witha particular Tcode in Services for Objects  tab.
    Actually i  want to see the custom workflow logs other than using tcode swi1  .
    Regards ,
    Sijin K P
    Moderator message: not directly related to ABAP development, please see the Workflow forum.
    Edited by: Thomas Zloch on Jan 17, 2012

    Hi,
    You have to implement GOS (Generic Object service).
    Plenty of material available for it, you can reffer to meet your requirment.
    Regards,
    Manish

  • Viewing data kept in "services for object" for several objects in alv grid?

    Dear Experts,
    Is it possible to view the data kept in "services for object" (The Button at topleft side of title bar of Master data header screen of objects like Functional Location/Equipment/Notification/Order) for several objects in one list like ALV?
    Please guide how to do it.
    Thanks and Regards,
    R N Sabat.

    Hi,
    The data stored in service object can be viewed latter on in change/display mode
    Kapil

  • Error in Viewing Draft Invoice for Service Item Type

    Hi
    I am facing an error in viewing draft service invoice.
    I am saving a document (PO/ Invoice)  as draft.
    When i am trying to view from document draft list by double-clicking it. the Visual Studio Just-in-Time debugger opens up stating SAP Business One.exe encounterd an problem and by clicking NO button the SAP closes.
    Note: The Invoice is created for Service Items, it is working perfect with Item.
    This is urgent - any help
    I am using 2005 B PL 05 with SQL 2005 on Win 2003 SP1
    Indrajit

    Do you have any Addon's.
    As you seek answers here please post a support message to SAP Support
    https://websmp205.sap-ag.de/sbo-message-old

  • Understanding on Oracle services for Microsoft Transaction Server frm dba point of view

    Hi ALL,
    i read : -> https://docs.oracle.com/database/121/NTMTS/recovery.htm#NTMTS003
    Need help to further confirm my understanding on what i read.
    I am coming from the DBA angle... .
    the functionality of the Microsoft Transaction server is integrated within the operating system as a COM+ server and as a .NET server,  "
    can i say these is the application servers ?
    and the Microsoft Transaction distributed co -ordinator components is part of it.
    Question, i don't install the Oracle Recovery Services on the above system right?
    Question 2, as a dba, my only concern is to make sure the Oracle Services for Microsoft Transaction Server is installed. Is this correct ?
    plus making sure to create the OraMTS administrator to run the recovery job to check for in-doubt transaction.
    Question 3:
    is this Oracle services for Microsoft Transaction Server used only when an application useses multiple databases in an env?
    Can i say that when there is no user MTSSYS in my database, Oracle services for MTS is not used?
    The reason why i ask is i am upgrading/ migrating my database and this database don't work with more then 1 database or the application does not work with more then 1 databases.
    I ask the apps team all they say is that they are also not too sure. Thus need help/ advice.

    Daniel,
    In pre-8.1.7.4.0 beta implementations, your application server e.g. IIS or MTX.EXE hosts MTS transactional components. When such components acquire OLEDB or ODBC connections to Oracle and external service setup for that database i.e. OracleMTSService<id> joins the MTS transaction on behalf of the Oracle database which quite often runs on a non-Windows platform e.g. Solaris. We restrict each database to have one and only such service. This brings in scalability and availability issues. In 8.1.7.4.0 we have embedded the transaction join and commit logic in the clientside dll. There is no OracleMTSService<id> for a given database. The only service needed is a recovery service one per Windows machine on which Oracle Svcs For MTS is installed. This service is automatically created on installation of the product and doesn't connect to the databases. Instead the involved databases connect to the service via HTTP to resolve any MTS-related transactions that are in-doubt.

  • SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

    The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
    w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
    w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
    Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
    Really? This totally contradicts the documentation found here:
    https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
    That article says remote connections are completely supported.
    ARGH! Why does this have to be so difficult to setup?!?

    Hi jeffoliver1000,
    According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
    In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
    actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
    please refer to the similar thread below:
    https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
    By the way, have you installed the other SQL Server edition before?
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Cannot view workflow log via Services for Object Workflow Overview

    We recently had an upgrade of R3/ECC and discovered a new issue.  For some reason we can no longer view workflow log via Services for Object > Workflow Overview for Material Master (transaction MM03).  We get the message "There are no workflows that have already worked with this object".  However, we have confirmed via SWEL and other t-codes that the workflow and log do exist.  This seems to be the only object we have this issue for after the upgrade.
    Anyone know what issue is and how to fix?   Or at least path to config in SPRO for "generic object services" where we can see if anything changed via upgrade for this object?
    Thanks,
    Matt
    Edited by: Matthew Huth on Apr 22, 2008 9:23 PM

    Found the solution.  See OSS note 553246.  This has been tested and works for us.   -Matt
    Note 553246
    Summary
    Symptom
    In the material master, the system no longer displays the attachments for the material or workflow items in the Generic Object Services.
    Other terms
    MM01, MM02, MM03
    Reason and Prerequisites
    As of Release 4.6B, business object BUS1001006 is valid for the material master. Until you have implemented Note 452424, the Generic Object Services is still published for the old BUS1001 business object. After implementing the note, all attachments, relationships, notes and workflow items that are assigned to business object BUS1001 are no longer displayed.
    Instead, all new attachments are assigned to business object BUS1001006. As a result, attachments cannot exist for both systems.
    For workflow items, the assignment to the business object occurs in the respective tasks. It may be very time consuming to convert the business object, depending on whether an individual subtype (assigned to BUS1001) is created.
    In other words, after you implement the note, the workflow items for business object BUS1001 can no longer be displayed in the material master.
    Solution
    With the following correction you can call the Generic Object Services for both business objects. When it is called, the system displays a dialog box in which you can choose the required business object, that is, BUS1001 ('Material') or BUS1001006 ('Standard material').
    This correction is delivered as a modification supported by SAP only. This is because the additional option means that attachments can be maintained as required in either of the business objects and users may therefore require extra training.
    However, the corrections enable you to display attachments and workflow items for both business objects without the need for a major conversion; this means that you do not get the impression that these have been lost.
    Alternatively, as of Release 4.70 (or Basis 6.20) you can, without making a modification, implement method ADD_OBJECTS of BAdI GOS_MULT_PUBLISH for filter attribute WF_OVERVIEW ('Workflow overview'), SRELATIONS ('Relationships') and VIEW_ATTA ('Attachment list'). The implementation should be similar to the following:
    METHOD if_ex_gos_mult_publish~add_objects .
      DATA:
        ls_lporb TYPE sibflporb.
      READ TABLE ct_lporb INTO ls_lporb INDEX 1.
      if ls_lporb-typeid = 'BUS1001006'.
        ls_lporb-typeid = 'BUS1001'.
        append ls_lporb to ct_lporb.
      endif.
    endmethod.

  • Backend roles neeed for user to access ESS related services

    Dear Experts-
    Can any one of you please point me to a document or let me know what exact role need to be assigned for a user on backend for him to access all ESS related services in Standard deployment.

    read the note 857431
    1129412   ESS: Authorizations and roles for WD services in ERP EHP3
    844639    MSS: Authorizations and roles for WD services in ERP 2005
    785345    Copying authorization default values for services
    612585    New: Authorization default values for ext. services
    The following roles were delivered for ESS with ERP 2005:
    SAP_ESSUSER_ERP05: Single role, containing all non-country-specific
                        functions.
    SAP_EMPLOYEE_ERP05_xx:   Single role with the country-specific
                              functions. Each country version has its own
                              role (with xx = country ID). The corresponding
                              composite role is SAP_EMPLOYEE_ERP05.

  • Urgent !! Error related to NT service for Report Server in 6i

    Recently i have installed Oracle 9iAS 1.0.2.1 on WindowsNT 4.0 SP5 and using Oracle 8.1.7.0.0. I found that the service for Oracle Forms Server [Form60Server] is working where as the service for Oracle Report Server gives the following error :
    Oracle Reports Server [Rep60_<computer_name>] service returned service specific error 186
    After giving this message, the service not started.
    Seeking guidence through this fourm.
    Regards

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ashwani Dave ([email protected]):
    Recently i have installed Oracle 9iAS 1.0.2.1 on WindowsNT 4.0 SP5 and using Oracle 8.1.7.0.0. I found that the service for Oracle Forms Server [Form60Server] is working where as the service for Oracle Report Server gives the following error :
    Oracle Reports Server [Rep60_<computer_name>] service returned service specific error 186
    After giving this message, the service not started.
    Seeking guidence through this fourm.
    Regards<HR></BLOCKQUOTE>
    I think something is either active or hung listening on the same socket Oracle Reports is trying to run on. Remove the conflict by using another port. If Oracle Reports/Forms has crashed and hung the socket the only easy way to fix the problem is to three finger salute the machine.

  • RPC request to the Microsoft Exchange Information Store service for log truncation

    Hello all
    Running Exchange 2013 CU3 on Windows 2008R2 sp1 in a two node DAG. We are seeing the bellow warning when running a backup. How to resolve this?
    RPC request to the Microsoft Exchange Information Store service for log truncation failed for database CoramB3\Servername. Error: Failed to notify source server 'servername.coram.com' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find
    the file. Also log files are not being flushed
    Bulls on Parade

    Hello,
    Please verify backup software.
    Please use vssadmin list writers command to check the status of the VSS admin. If it is in a
    failed state, please restart the Exchange replication service and then check the status again.
    Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about mailbox database copies.
    Please use Get-DatabaseAvailabilityGroupNetwork “DAG Name” | fl cmdlet to view configuration and state information for a DAG network.
    Please use Get-DatabaseAvailabilityGroupNetwork DAG Name\MAPINetwork | fl cmdlet and Get-DatabaseAvailabilityGroupNetwork DAG Name\ReplicationNetwork | fl cmdlet to
    check configuration information for MAPI network and Replication Network.
    If the above configuration information is ok, please check if there are other related errors in application log.
    Cara Chen
    TechNet Community Support

  • Services for object buttons randomly disappearing from FB03

    Hello SAP Experts,
    We display an FI document via tcode FB03 (Display Document) and use the "services for object" buttons to attach documents via the "create attachment" button and also to view attached documents via the "attachment list" button.
    However, quite often when displaying the FI document after a document has been attached, the "services for objects" buttons are not displayed.  Just a blank toolbar appears.
    Later on the when the FI document is displayed again via tcode FB03 (Display Document), the "services for objects" buttons do appear and the attachments can then be displayed.
    As the attachments can be viewed sometimes, I would say that this issue is not related to security.
    Any idea's what maybe causing the "services for objects" buttons randomly disappearing???
    Regards,
    SAP Muppet

    Hello SAP Experts,
    Any ideas or comments here???
    Regards,
    SAP Muppet

  • Services for Object in VF02 & VF03

    Hi All,
    Attaching a document through "Attachment list" option by the "Services for Object" icon in VF02. however some options are grayed out. Please read through for the explanation of the problem.
    1) Go to transaction VF02.
    2) Input a billing document and press Enter.
    3) Click on "Services for Object" button and a dropdown list opens which has the following options -:
    a. Create
    b. Attachment list
    c. Private Note
    d. Send
    e. Relationships
    f. Workflow
    g. My Objects
    h. Help for Object Services
    However the option "b" and "e" (i.e. Attachment list and Relationships) are grayed out. Can anyone please help on how to activate the above mentioned options. Is it done by BASIS team. Please help.
    PS: "Services for Object" icon is found exactly BELOW the "Enter" (green tick icon in the top left) button.
    Thanks & Regards,
    Himanshu Bhusan Sahoo.

    Hello,
    Please check the roles related to the below authorization object.
    Authorization Object  
    S_WFAR_OBJ          
    Value  
    NV          
    Value  
    VBRK          
    Value  
    YP3INVOICE          
    Value  
    03          
    archiving Related role will give you access to View the billing document in PDF.
    Thank you
    Regards
    Bala

  • Services for Objects Attachement List Display Note not Viewable

    Hi Experts!
    Good day! I'm trying to display a note in FK03 (related to Services for Objects - Attachment List) and I only see white screen pop up window. No message and text information. When I tried to use another PC I can successfully view it.
    Is there's a plugin that I may need to install?
    Your help will be greatly appreciated.

    Hi Marty
    It is my understanding that the IXOS licensing is based on users retrieving of documents not necessarily the viewer so the licensing implications of having non-IXOS viewers accessing documents using the generic archivelink viewer is still likely to result in licensing implications if an audit is conducted at any stage.
    The transaction for specifying the viewer is the OAA3 and OAG4.
    Regards,
    Athol

Maybe you are looking for