Viewing files from MacBook Pro on Windows Desktop

Hi y'all,
I have had my mac for a while now and have my pc set up so I can view files from my pc on my mac. Now If I wanted to do the opposite (view files from my mac onto my pc) how would I go about that?
Thanks,
James

Do you know how?
Do you have a home network to connect them both to?

Similar Messages

  • How to transfer files from MacBook Pro pages app to iPad mini pages app?

    How to transfer files from MacBook Pro pages app to iPad mini pages app?

    The above assumes you are running current software.
    Mac - OX X 10.9.2, Pages 5.1.
    iPad - iOS 7.0.6, Pages 2.1.

  • I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other

    I am trying to transfer files from MacBook Pro to new MacBook air using Migration assistant via WiFi connection - the two computers can't seem to find each other.
    Any ideas?
    Barry

    Try this article - http://support.apple.com/kb/HT4889.
    If it doesn't help, post back in this thread.
    Best of luck,
    Clinton

  • Cannot transfer files from macbook pro running os 10.6 to macbook pro running 10.8

    having trouble transferring files from macbook pro running os 10.6.7 to macbook pro running os 10.8. getting message to up grade migration assistant but cannot find upgrade

    The latest version of Migration Assistant is version 5 and should have been installed in you Utilities folder when you upgraded to version 10.8. Use the 10.8 version machine to migrate to and you should have no problems.
    Clinton

  • Hello everybody! i want ask you... how can i transfer my files from macbook pro to flash card or other devices?

    hello everybody! i want ask you... how can i transfer my files from macbook pro to flash card or other devices?

    Of course you can.  You may use USB drives, HDDs and other Mac if the need be.  More details from you will be required if you want more information.
    Ciao.

  • Moving files from MacBook Pro to MacBook Air

    My MacBook Pro's display is all crapped out (can't even view on external monitor) and I'm trying to transfer files over to my new MacBook Air.
    How can I do this? Since there is no Firewire on my Air, I can't boot into target disk mode and just copy my home folder over.
    Any other suggestions?

    If your display is so bad, I will assume you cannot get to system prefs to enable sharing/screen sharing etc.
    Have you considered removing the HD from the MBP, putting it into an enclosure and connect it to the air via usb?
    Given the state of things that is what makes sense to me.

  • Wireless Printing from MacBook Pro and Windows 7 laptop through iMac

    I have looked everywhere I can think and have not found a solution to this problem:
    I just bought a 21.5" iMac and a Windows 7 laptop. I already had a 15" Macbook Pro.
    I have an HP C5280 printer that is now connected via USB to the iMac. All computers use my wireless home network using a Netgear N wireless router.
    I cannot figure out how to print wirelessly from either the MacBook or laptop through the iMac. Printer software is installed on all computers and printer sharing is enabled on the iMac.

    Welcome to the Apple Discussions!
    In the Finder go to Help>Mac Help. Select the Index, upper right. Go to S>Sharing printers. You will find instructions for configuring Macs and PCs for printer sharing among the articles available.
    Dah•veed

  • How To Transfer Hard Drive Files from Macbook Pro

    I have a macbook pro(late 2006 model) which won't turn on. Brought it to the apple store for them to take a look at. I was told that the main circuit board is broken and it will be cheaper to buy a newer macbook instead of fixing it. I was also told that the harddrive was ok. How do I transfer the files from my old macbook pro hardrive(which won't turn on) to a new macbook pro? They offered to help me at the apple store but it will cost me $99 for their "one to one." Can someone help me? Thanks!

    k-ci204 wrote:
    What size of a usb external harddrive caddy do I need? What is compatable with the macbook pro hardrive?
    2.5" SATA. USB2 models can be found be found for $15 or so. Then the enclosure can be used with an old or new HD for backups/troubleshooting. I have way too many around, but I don't know what I'd do without at least one 2.5" and one 3.5" (but I prefer the faster FireWire 800 models, which are more expensive). In any case, I think it's safe to say you won't regret spending $15 on an enclosure.

  • Problems projecting from Macbook Pro in Windows 7

    Hi,
    Still having no joy getting my macbook pro 13" (2011) i5, intel chipset to project from windows 7 via bootcamp. I work in the events industry and need to be able to hook my laptop up to any projector so just having DVI/HDMI connection is no good to me, can anyone help....?

    Welcome to the Apple Discussions!
    In the Finder go to Help>Mac Help. Select the Index, upper right. Go to S>Sharing printers. You will find instructions for configuring Macs and PCs for printer sharing among the articles available.
    Dah•veed

  • Quickest way to transfer iMovie 09 Files from Macbook Pro to iMac

    Hello:
    We recently got an iMac and I would like to transfer my iMovie 09 files from my macbook pro to the iMac which also has iMovie 09. Can you suggest the quickest and easiest way to do this? I am assumign this can be done since they are both iMovie 09-anyhelp is appreciated

    Huh.
    Well, my approach has always been:
    1. Click the "Consolidate Media" menu in File, and click the buttons to move all source materials into the project.
    2. Shut down iMovie
    3. Navigate to Movies/iMovie Projects in Finder, and copy the corresponding project over to the other machine's Movies/iMovie Projects folder.
    4. Start up iMovie on the other machine.
    I don't do much video (mostly photo slideshows) in iMovie, but this certainly hasn't caused me any problems before. iMovie just sees the new item in its iMovie Projects folder and allows you to select it.

  • Transferring files from MacBook Pro hard drive to Time Capsule

    I recently bought a Time Capsule. I know I can use that as an external hard drive to save disc space on my MacBook Pro. How can I transfer files that are already on my MacBook Pro hard drive to the time capsule? For instance, I have videos of my daughter saved on MacBook Pro that I can view on iTunes or transfer them to either my iPhone or iPod Touch. Is there a way to either move individual files or the entire folder to Time Capsule?
    Thank you!

    Open the folder and drag the contents over.

  • Installing Snow Leopard from Macbook Pro on a desktop MacPro?

    So in a few days my new Macbook Pro will arrive (old powerbook's screen committed suicide). Snow Leopard and iLife will be installed as well as the discs of these programs. I have a Intel Mac Pro that is still running Tiger along with the old iLife stuff. Can I use the Macbook's software discs to install Snow Leopard and iLife on the MacPro desktop?

    This is asked here frequently, maybe once a week, so you might want to search Discussions for more info, but the slightly longer answer than already posted is:
    1. The license that comes with the software included with a new Mac prohibits its use with any other Mac.
    2. The installer discs that ship with Macs include technical measures to prevent users from violating that license provision.
    If you want to run Snow Leopard & the upgraded versions of iLife on the older Mac, you need to buy licensed retail copies of each for that. Snow Leopard is only $29. iLife '09 is $79 from Apple, less from some online retailers like Amazon.com.

  • Aperture installation deleted all image files from MacBook Pro.

    After installing Aperture 3, I noticed that all the image files I had on my MacBook Pro immediately disappeared. These were stored in various locations throughout my computer depending on subject (e.g. "Emergency Response Training", "Summer 2009", "Car Restoration" and so on). A small number were in the "Pictures" folder but most were kept in other locations. All the folders and subfolders where these images were stored are intact but the images are gone. There is simply a "thumbs.db" file inside and the folder size is about 6 kb on average.
    I did nothing other than install Aperture (no importing or library creation) and none of these images or folders are in the Aperture library. A similar thing happened with iPhoto where all my iphoto thumbnails show up but there appears to be no actual photo. No images prior to Aperture installation appear anywhere on the Macbook using tailored queries with "Find". 
    Apple support indicated that Aperture would not search out these photos unless prompted and would never delete them but It's hard to imagine how else this could have happened, as it happened only during installation (subsequent photos are fine) and targeted all image files in every location. Hard drive is new and indicates no problems.
    Any ideas what might have happened - and, more importantly, how I might be able to recover the missing images? Unfortunately, my upgrade to Lion obliterated my DNS 321 back up disk, as well, and I don't yet know if I can recover those files.
    Thanks for any help you can offer.

    Apple support claimed it was impossible for Aperture to delete files, as well, Allen. All I can tell you is I installed Aperture and the files immediately disappeared. I installed Aperture with the intention of learning its capabilities over the ensuing months, as I had never used it before, and so made sure to do nothing but install and launch so I could have a look at it and see how it was set up.
    The network hard drive obliteration occured when I was trying to transfer novie files from my Macbook to my DNS 321 network drive, which I use to store all my backups and most of my media files. I've done this countless times with Snow Leopard without a hitch. However, when I tried it with Lion the system locked up during the transfer and I lost my connection to the drive. Once I managed to reconnect, I found that I couldn't get into the folders on the network drive anymore. All that would come up was a "My Documents" folder, which had no content. After doing a websearch I discovered that Lion no longer supports DNS 321 and that others with similar style drives had been having similar problems. What might be unique to my situation was that when I hooked up an old PC to the DNS 321 I was able to get back into my original folder set up but I found that the folders labelled from (A to J) were missing entirely and that the remaining folders had no content.
    So, as I mentioned in my first post, the only input from me was installation and launch of Aperture and the only thing I was doing with my network drive was transferring movie files from the Macbook to the DNS 321 drive. If neither of those actions could possibly have caused the problems I described, I'd be very eager to learn what did.

  • New iMac - need to move files from Macbook Pro to new iMac

    Hi there everyone,
    Did some quick searching, but didn't find the answer that I needed.
    I am picking up my new 27" iMac (base model) and will need to move my files and programs from my Macbook Pro to the iMac. What is the best way to accomplish this? Are there any tools on the iMac that will help do that, or is it a manual effort?
    Thanks!
    Mark

    When you first start new Mac it will ask you if you want to migrate. Say yes at that point and Setup Assistant will migrate everything for you.
    Allan

  • Can't delete file from macbook pro...

    I recently bought a new macbook pro (2.3 GHZ, i5, 4gb ram...) and began to download some torrents. I was converting one movie file to play on my iphone but I cancelled the conversion because I realized the picture quality of the movie wasn't that great. I deleted the file but now there is a left over file that can only be seen under the "all my files" section in the Finder that I canno delete. There is no icon for this file except for this grayed out cut out.
    When I click "get info" I'm unable to move to trash that way and it says I have "unknown access" under the sharing and permissions tab. I can't drag the file to the trash bin and when I do, another file is taken instead.  When I click on the icon this message displays -The alias “Immortals.2011.DVDScr#8B1B.divx” can’t be opened because the original item can’t be found" I'm given options to click "Delete alias, Fix alias, or Ok". When I click delete alias, nothing happens, when I click Fix alias I can't find the original becuase I've obviously deleted it and clicking ok just closes the message.
    I have two questions,
    1. When I "get info" on file, it states that the file size is 956 mb. Is it really taking that much space up on my hd? I know I deleted the original file. What gives?
    2. How can I delete this file?
    I could really use some help on this. I've asked my friends and they coudln't figure it out either.
    I'd appeciate any and all who can give me some ideas.
    Thanks,
    D
    Message was edited by: dee-g

    I can't change the file name or extension - it's grayed out.

Maybe you are looking for