Viewing new comments on blogs and podcasts

Hello,
So, I open up iweb and the symbol with the number pops up on the iweb icon(which from what I've gathered is the "new comments"). Is there a way to just check the new comments, or do I have to go through my site and find them one by one. I allow comments on my pictures(as well as my blog and podcast) and I have a lot of pictures, so going through one by one to find comments doesn't seem to make much sense because it would take forever.
Thanks for the help.
Jimmy

I just spent a lot of time trying to figure this out myself, but I finally did.
In iWeb, look to the left side of the page names in the left hand column. You will see a blue dot next to any page with new comments somewhere within. If the comment is for a blog entry, the blue dot will be next to the main blog page. Click on "entries" under that and look for the blue dot to the left of the blog entry titles.
If the comment is on a photo, there will be a little comment icon on all photos where comments have been left. The icon is hard to see and there's no apparent way to tell which photo might have new comments that I can see, bu it's there. The icon is a little white bubble in the bottom right hand corner of the photo -- it's a bit hard to see.

Similar Messages

RSS XML Files for a Blog and Podcast on Same Website With iTunes Feed

Does iWeb support both a separate blog and podcast on the same website feeding the Podcast to iTunes? I got my podcast going on iTunes, then it stopped working after I changed the iTunes podcast name in iWeb and didn't edit the xml file. My podcast is gone on iTunes and I can't get the xml files correct for the blog or the podcast. I'm submitting the correct URL to iTunes but iTunes continues generarting 404 errors.

No answers. Will re-post more clearly

How to view new comments on Wiki or Blog Pages?

I am trying to find a way (either via RSS, via Email or via a custom search) to be able to identify OSX Server Wiki- and Blog-pages with new comments easily. Unfortunately this seems to be somewhat of a problem, since most searches I tried do not include comments. Plus, I could not figure out if there is a RSS feed for new comments on posts (the usual RSS feeds do not include the comments on the pages). Does anybody know a way to get this working with the 10.5 Server Collaboration tools?
Thanks,
Floh

I have searched this forum extensively and found lots of people with the same issues.. but no solutions. It seems like this just might not be possible with the Server Wiki. If anyone does find a solution I would love to hear what it is!
In the meantime.. I have been telling users to add a comment, then click the edit button, add the text "Comment Added" as the comment about the page edit, and then click save. This makes it so that the page has been "updated" and will show up in an RSS feed with the title "Comment Added". It is a silly solution and adds extra time and complexity for people.. but so far it is the best solution I have come up with.

QT is causing conflict with my blog and podcasts

hi
I have a blog and do a lot of podcasts. QT is conflicting with the software that I use to post the podcasts and my being able to listen to them.
how can I adjust the QT so that I can still have it for Itunes but not have it conflict. I must have FLASH as the default for FLV and WSH files for my podcasts
help!!
I had removed QT yesterday and everything was fine. Everything was fine until last week when something downloaded from itunes and voila.. no play bar was showing up on my computer
thanks
Stevie

I'm not sure if this will be of help or not. You might need to uncheck Flash media in QT settings for Browser>Mime settings and File types, take a look at. 4.1 QuickTime plugin takes over Flash.
http://kb.mozillazine.org/Macromedia_flash
Also if you open the Folder Options control panel click on File Types, you might be able to make some adjustments in there.

Commenting on blogs and file structures

Hi,
two problems. I was once able to post comments to my blog but now it won't work. I get the processing error when anyone clicks on add comment. I have tried making new pages and republishing, etc. and nothing works.
Also, is there any way to change the file structure within iWeb? It's slightly annoying having a main page that is www.whatever.com/iWeb/Site/home.html. It would be so much nicer to just have /index.html or /blog.html etc.
Thanks!

Hi,
I too am having the exact same issue and need to figure out a solution as soon as possible. My site is hosted on .mac and I'm using the iWeb version previous to iWeb '08.
I am able to add a comment by selecting "see more comments" on the page (the add a comment link is not appearing on the site). Once I click on "see more comments" it displays a "add comment" link.
When I click on "add comment", I get the same error, "We're sorry. We are having a problem processing your request."
What can I do to fix this issue?
Thanks for your help!

Adding RSS feeds to pages other than blogs or podcasts

Has anyone worked out how to do it? I finally worked out what RSS actually is but then found iWeb itself only lets you add RSS buttons to blogs and podcasts. Has anyone discovered a work-around?
Thanks,
Simon
MacBook Mac OS X (10.4.9)

Simon - pages that iWeb defaults to (blogs and podcasts) are the pages that have "update-able" content. iWeb currently wont allow you to put it on a page that isn't set up that way.
I've tried to get it done on my pages, but to know avail yet. the best I've been able to come up with is that the program will give you the opportunity to "announce" your site when you publish a new page. If you create a group in mac mail, you can quickly announce an update that way.
not as sexy I know, but it gets the job done...

Would you buy a theme without blog or podcast pages?

Folks, I'm doing a survey here. I don't know how many of you follow the custom iWeb theme conversations, but I've found a way now to make complicated iWeb themes for 2.0 at a pretty fast rate. The only problem is, the method for doing it does not work for blog or podcast pages. I can make simpler themes with blog and podcast pages, but complex layouts can't be done without shear torture.
So my question to you is this, would you be interested in a great theme that didn't have those pages? How many of you need blog/podcast pages? I'm just trying to see if a template without them would fly. In stead of those two pages, I'd provide two additional page layouts... like an online store layout and a product detail page.
Thoughts?

Ah, well that was an enthusiastic yes. What kind of sites do you build where this might be a nice option?

Can I add a Comments box to a non-Blog or Podcast page?

I want to create a website that allows friends and family to add comments. Do I have to use a Blog or Podcast format or can I create a Blank page that will allow comments? Are there any other applications besides iWeb that will allow me to do this if iWeb won't?
Thanks for any help.
Sunil

The answer will most likely depend on what Software release and OS you using and where the Open Dialog is being opened from. For example Windows 7 Pro Photoshop CC menu File>Open the open dialog has a search area looks like a standard Windows 7 Open dialog. CS6 Does not have a search.

How to get notified when new comment is left on blog?

I'd like to be notified (preferrably by e-mail) when a new comment is left on my blog. Is that possible in iWeb '09?

When comments are added to your site, a blue dot appears in the iWeb sidebar next to the blog page if you are connected to the Internet. iWeb's icon in the Dock will also display a red badge containing the comment count. ...But no email alerts.
For those, instead of iWeb's blog, you may want to consider using the free, web-based Posterous which provides email notifications aswell as posting blog entries via email:
http://blog.posterous.com/new-on-posterous-daily-and-wee
As an alternative to setting up a basic hyperlink to your external blog, you can link to it from iWeb's navigation bar:
Create a blank internal page titled "Blog" (actually you can name the page whatever you want.) Then in that Blog page add an HTML Snippet with the following code:
<script type="text/javascript">
parent.window.location = "http://www.yourblogname.com"; // change this to your own URL
</script>
...Once published, clicking on "Blog" in the navbar will immediately redirect to your external Blog page. (Thanks to Cyclosaurus for the code).

IWeb, Blogging and Comments when using a different Host

Hi
I have an iWeb site, using Google Domain name, and hosting services of Network Solutions. I want to add a Blog to my site but allow for comments. Currently, iWeb is telling me that comments are added only if I use my MobileMe account. Is there a way to have a blog in iWeb, publish through my current host and have a comment feature that will update properly without kinks? I am considering using Blogger (Google) but unsure of what to do. Any suggestions or realities are accepted! Thanks

Just use Blogger or WordPress to create your blog and then you can place a link on your website to your blog. Either that or you can display your blog directly in your site by using iframe code.
Your other alternative is to use the iWeb blog and use something like http://www.intensedebate.com as a comment feature. You could include it on the same page as the blog or put it on a different page.
Personally, I don't like the iWeb blog, so I use WordPress for my blog and just keep a link to it from my site so that it goes straight to the blog and then opens in a new page.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I'd like students to be able to view my comments on printed version of their papers.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I am a teacher, and I would like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.

There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
Jerry

I recently purchased the new nano (7th generation) and I love it except for one issue. On my old 2nd generation nano, when I played podcasts, it would play podcasts one at a time. So if I had 20 episodes of a podcast on the device, it would stop at the e

I recently purchased the new nano (7th generation) and I love it except for one issue. On my old 2nd generation nano, when I played podcasts, it would play podcasts one at a time. So if I had 20 episodes of a podcast on the device, it would stop at the end of each one.
With the new nano, I can select and play a podcast, but when it’s over, it goes straight to the next one without prompting. It keeps on playing all of the episodes of any podcast until you stop it manually. Setting the repeat function differently does not prevent episodes from being played automatically.
This can be very irritating when I only want to listen to one podcast. I’ve often fallen asleep listening to one episode of a podcast, only to be woken up hours later by the iPod working its way through all subsequent episodes. It is also annoying that any podcast which has started automatically in this way is marked as ‘played’ – even if you stop it within a few seconds. This makes it hard to keep track of what you have actually listened to.
Is there any way to set the iPod to play all the podcasts individually? I have read the User Guide from cover to cover, and can’t find a way of doing this.
MD

Dude or hot-spur,
Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
Thank you again

Creating a view with existing GeoRaster columns and new SDO_GEOMETRY column

Hi,
In a nutshell, I already have 1 real table, which has several attributes including types such as text, numbers etc. but also a GeoRaster column. This table works great, has its metadata stored properly and is spatially indexed; no worries.
I am then creating a view based on the above mentioned table, including the GeoRaster column. This worked, no problems. However now I want the same view to also have a SDO_GEOMETRY column which explicitly stores the spatial extent for each GeoRaster. Note the original table does not have this SDO_GEOMETRY column. So, I have created a revised SQL statement to create the view, but now it dynamically adds a new column and puts the GeoRaster.spatialextents into the SDO_GEOMETRY column.
This worked, the data made it into the view, but when we try to view the SDO_GEOMETRY in a viewer, we get errors. I added a system metadata entry for the view, but this did not help. Also, it is not possible to spatially index a view so I knew that was not the problem.
I think what has happened is the SDO_GEOMETRY column is in a sort of "limbo", where because it was not contained in the original table (and indexed there) and it is not able to be indexed in a view, it cannot be manipulated/viewed/used spatially.
Here is a snippet describing the original table:
"IMAGERY_ID" NUMBER NOT NULL ENABLE,
"CAM_ANGLE_X" NUMBER,
"CAM_ANGLE_Y" NUMBER,
"CAM_ANGLE_Z" NUMBER,
"SPEED" NUMBER,
"HEADING" NUMBER,
"IMAGE_GEOR" "SDO_GEORASTER",
"ACQUISITION_TIME" TIMESTAMP (6),
"SENSOR_ID" NUMBER,
"DOWNWARD_LOOKING" CHAR(1 BYTE),
"ORG_ID" NUMBER,
"POC_ID" NUMBER,
"FILE_NAME" VARCHAR2(100 BYTE),
"CORRELATION_ID" VARCHAR2(256 BYTE),
And here is the statement I used to create the new view:
CREATE VIEW level_0_img_view (imagery_id, cam_angle_x, cam_angle_y, cam_angle_z, speed, heading, image_geor, acquisition_time, sensor_id, downward_looking, org_id, poc_id, file_name, correlation_id, geor_extents)
AS
SELECT a.imagery_id, a.cam_angle_x, a.cam_angle_y, a.cam_angle_z, a.speed, a.heading, a.image_geor, a.acquisition_time, a.sensor_id, a.downward_looking, a.org_id, a.poc_id, a.file_name, a.correlation_id, a.image_geor.spatialextent
FROM imagery a
WHERE a.file_name LIKE '%.lev0';
Note in the above statement that the "geor_extents" column is the new column added dynamically (and not in the original table). Note the new column with the SDO_GEOMETRY data is flawless, I have looked at the records in SQL developer and all the data is there.
Any ideas?
In case you're wondering, I do have reasons for: (i) wanting an explicit column with the SDO_GEOMTRY (serving via WFS), and (ii) not wanting to alter the original table to include the equivalent SDO_GEOMETRY column.
Cheers,
M.

Hi,
if you are having problems to display your view spatial columns in MapBuilder/MapViewer, you may be missing to register the view information in the metadata (name and spatial columns).
For example, lets see the following table that simulates your case:
SQL> desc pci_image;
Name Null? Type
GEORID NOT NULL NUMBER
TYPE VARCHAR2(32)
GEORASTER MDSYS.SDO_GEORASTER
-- create a view
create view pci_img_view (georid,georaster,geor_extents)
as
select a.georid,a.georaster,a.georaster.spatialextent
from pci_image a;
-- register metadata for view spatial columns (GeoRaster and geometry column)
insert into user_sdo_geom_metadata
select 'PCI_IMG_VIEW','GEORASTER.SPATIALEXTENT', diminfo, srid
from user_sdo_geom_metadata where table_name = 'PCI_IMAGE'
insert into user_sdo_geom_metadata
select 'PCI_IMG_VIEW','GEOR_EXTENTS', diminfo, srid
from user_sdo_geom_metadata where table_name = 'PCI_IMAGE'
There is no need to index the spatial columns if they have been indexed before.
Now, if you go in MapBuilder you should see the the view name in the list of geometry tables, and be able to create a theme on column GEOR_EXTENTS (select it on the combo box) and to preview it.
For the GeoRaster column, currently the view name is not shown on the list of GeoRaster tables in MapBuilder.
For GeoRaster data, MapBuilder uses the contents of metadata view user_sdo_geor_sysdata, and then it would be needed to register the view contents there. We will talk with Jeffrey to check if there is any problem in registering
view contents in this metadata view. If the view name and georaster column is registered in user_sdo_geor_sysdata,
then it should show in MapBuilder. But you can still create a GeoRaster theme for this view using a SQL command, and should be able to preview it in MapBuilder.
-- create a GeoRaster theme based on view Georaster column.
insert into user_sdo_themes values (
'PCI_IMAGE_V_GEOR',
'View of georaster column',
'PCI_IMG_VIEW',
'GEORASTER',
'<?xml version="1.0" standalone="yes"?>
<styling_rules theme_type="georaster" raster_id="1" raster_table="RDT_PCI" raster_bands="0,1,2">
</styling_rules>');
-- commit changes
commit;
Joao

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files

I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?

Hi Larry. I see. It is a file I have worked on previously, and the font is Myriad which I though came with the system. I just changed to Myriad Pro and the pink box disappeared. Thanks for the assistance, I know a new thing!

Viewing new comments on blogs and podcasts

Similar Messages

Maybe you are looking for