Viewing reports in Access from GUI' s in Java

hi i have reports created in microsoft Access and want to know how i can view these from my GUIs. the GUIs are connected to the database through JDBC and i want to be able to click on a button on a Gui and view the report. Can any help me. i have tried looking for code but with no success.

hi i have reports created in microsoft Access and
want to know how i can view these from my GUIs. the
GUIs are connected to the database through JDBC and i
want to be able to click on a button on a Gui and
view the report. Can any help me. i have tried
looking for code but with no success.I don't think this is possible. JDBC will not find the reports in Access.
xH4x0r

Similar Messages

Where can I find metadata for Power View reports created in sharepoint 2013.

I am looking for what I would assume is the sql server tables that would hold the MDX (DAX) Queries for the power view reports. Example my customers may create say 30 reports and I need to know quickly if an attribute I am changing is in those reports.
How can I find out what report(s) are using that attribute/measure? Not sure that it matters but using sharepoint 2013 on premise and connecting to Analysis Services (molap).
Ken Craig

P.S. if this is still not making sense create a power view report in SharePoint from a SSAS cube. Save that power view report in SharePoint.  The power view report should
have a couple of measures and 1 or 2 dimension. Open the report just to confirm it is saved correctly. Now go to SSAS and rename 1 of the measures or dimensions that you used, Save and rebuild your olap . If it’s a calculated measure
you just need to save olap.    Now open your power view report and notice that that measure/dimension you changed is no longer in the report.
IN one hand it is great that reports do not error and break; however, on the other hand the users might not know what measure/dimension changed and then be lost/mad because the report no longer
works like they want. In my opinion it would have been better if the power view broke with an error message that it cannot load because measure x does not exist than to just load fine.
In any case I need a method to know when a dimension/measure is modified what reports are using it.   Another example is this could even be a case where the dimension values are getting
modified and we need to potentially make a update to any power view/pivot using this dimension as a filter?
Ken Craig

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Is it Possible to upload the output from Oracle reports To Access database

Hi All,
Wish you All a Very Happy New Year.
I have a query.Is it possible to
upload the output from the Oracle reports
to the Access database???
Any suggestions would be appreciated.
TIA
sg

Hi sg,
Research the DDE option.
Dynamic Data Exchange (DDE) is a mechanism by which applications can communicate and exchange data in Windows.
I have imported data into the excel spreadsheet using DDE built in functions. I am sure it can work with MS Acess as well. If not, then you need to create a 2 step process .. reports -> excel -> access.

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to make report with access 2010 from SharePoint Discussion lists 2013

HI,
I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
but instead it is shown as a separate entry in the database.
Anyone can please help?
SAN
Santhiya
Santhiya

Hi Santhiya,
I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
Thanks,
Wendy
Wendy Li
TechNet Community Support

Launching Microsoft Access from Internet Explorer to view a downloaded MDB file opens the wrong file (not a problem if I use Firefox)

When clicking on a link (in Internet Explorer 9) to download an Access MDB file and then choosing to open the file directly in Microsoft Access (2007) instead of saving it, the file is copied to Temporary Internet Files but Microsoft Access tries to open
a different file and displays an (Unrecognized database format) error.
When I click on the option to open the file, the MDB file is copied to Temporary Internet Files\Content.IE5 but instead of that file, Access tries to open a different (incorrect) file located in Temporary Internet Files\Content.MSO (e.g. in the above error
message, NativeView.do is an XML file containing an error message).
I don't see this problem with Word, Excel or PowerPoint files. When opening a Word file (without saving) the Word file is copied to Content.IE5 but an identical .tmp file is created in Content.MSO which when opened in Microsoft Word displayed the required file
correctly. The same happens for Excel files. PowerPoint appears to be handled a little differently (no .tmp file created in Content.MSO but the required file is still copied to Content.IE5) but the PPT file is still opened correctly in Microsoft PowerPoint.
I think the Content-Type "application/msaccess" is fine because Internet Explorer does launch Microsoft Access. It just tries to open the wrong file (or so I think). However, it looks like the file type is not being determined. Here is what I noticed
when trying to open different Microsoft Office files using Internet Explorer:
The last one is the MDB file. As you can see, only for this type of file, the "Type" (Microsoft Office Access 2007?) is not displayed in this Open/Save dialog box.
On Firefox, I don't see this problem. When I tried clicking on the link to the MDB file in Firefox, Microsoft Access was launched and the file was opened correctly. Is there something I can do so the MDB file is opened properly using IE? I can add/change headers
in the HTTP response that writes this file to the output stream (on disk) if that helps.
Thanks for your time!

Sounds like a problem symptom to be discussed in either an IE forum or an Access forum, not here. How did you come to post here? ForumsRedesign. That might be an on-topic issue for this forum. <eg>
Can you find your way to either of those other forums easily from here? Another on-topic question for here I think. ; )
Robert Aldwinckle
Oops, my bad. Thanks for letting me know! :)
I've re-posted it here: http://social.technet.microsoft.com/Forums/ie/en-US/1a818501-296c-42fb-8abb-ba914629c962/launching-microsoft-access-from-internet-explorer-to-view-a-downloaded-mdb-file-opens-the-wrong-file?forum=ieitprocurrentver
Hopefully that's the right place for this.
Cheers!

WEB reports can it possible to access from out side domein

Hi, i want information whether WEB reports can be access from

Hi all,
WEB reports can it possible to access from out side domein. If yes please tell me how..

CR XI R1: viewer can't open report with UFL from COM dll

Hello all!
I faced the following problem: report which is uses functions from COM dll doesn't works on customer's pc. CRViewer throws exception when calling ViewReport() method. GetLastError() gives just 0 ...
All other reports without functions from COM DLL are working on that PC however. Moreover, reports which uses function from non-COM DLL are also working.
Versions & environment:
- Report file is designed in CR11, CR Developer; Product type: Full, Product Version: 11.0.0.895
- Runtime files on customers pc installed by .msi created from merge modules for Crystal Reports XI RDC Deployments (latest available SP4 for CR XI R1: [crxi_rdc_merge_modules.zip|http://resources.businessobjects.com/support/communityCS/FilesAndUpdates/crXI_rdc_merge_modules.zip], as listed on [this|http://resources.businessobjects.com/support/additional_downloads/runtime.asp] page)
- target OS: WindowsXP SP3, all updates are installed
- i'm using COM crviewer, but there are some points in application where report is opened using CRPE api - it is also crashing on reports with custom functions from COM DLL
- UFL DLL is registered and loaded correctly (investigated by debug output), looks like crash occured during attemt to call function
- just for test I tried to install CR Developer on customers PC: it successfully opens all "problem" reports, but the viewer in application still crashing ...
I would appreciate any tips / suggestions. Please also let me know if I need to specify versions of other products / components.
Thx,
Andrew

Sorry, but you have to define "viewer just crashed". To different people this means different things; error, viewer never shows up, application terminates, etc., etc., etc....
If the issue is only 10% of computers then it is not
Re. "...could be caused by:"
- previous installation of CR8.5 (or earlier) runtime (how to cleanup it correctly?)
possibly - see below
- OS configuration (what we need to ajust?)
probably not - as long as it's the same OS and SPs
- something missing in our code (but why it works in 90% cases?)
-no
- something wrong with CRXI runtime (but we a using latest available MSMs, and again, this works in 90% ...)
possibly see below.
I would approach the issue by running [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] and comparing the dlls loading on a computer that works and one that "crashes"...
Your second utility is [Process Monitor|http://technet.microsoft.com/en-ca/sysinternals/bb896645.aspx] but ProcMon creates large and difficult to read files.
Oh, and get the powers that be to start to consider moving away from this legacy "stuff". Like I said, PE APIs have been gone since version 9 of CR and RDC has been retired in CR XI R2 (11.5). Neither product is supported anymore.
- Ludek

How to migrate Power View reports and respective BISM connections from one SharePoint environment to another?

Hello All,
We have a few Power View reports and respective BISM connections that need to be migrated from our DEV SharePoint 2013 site to our TEST Sharepoint 2013 site. The reports have been "migrated" over but they do not work. Eventually, I just recreated
all the Power View reports from the BISM connections.
We have to do one more Sharepoint migration, and I'd rather not have to recreate the reports. What do we need to do in order to migrate the Power View reports seamlessly?
Thanks,
Carter

I created a new BISM in the new SharePoint site with the same name and modified the cinneciton string in the report and uploaded the PowerView Reports ( download from the existing SP site ).
Please see the below link to modify the connection string in the PowerView report.
https://pivotstreamllc.zendesk.com/hc/en-us/articles/202123933-Editing-a-Power-View-Connection-String

Saving BI Report templates created from portal view

Experts,
In our company, we have a Corportate Portal (its SAP Netweaver/ SAP Portal 7.0), in which a BI Portal connects to this Corporate Portal. In our portal, we have a process in place which tracks our products, and we also have BI Reports within this portal in which you can access and execute to view reports (which then can be printed out)..
*Question:*
Obviously BI Reports allow a user to format the reports to there needs (through the web portal)...If a user finds a very good format and wants to save it (to give to other users or to reload a different for themselves without have to redo it) through the portal, can they do that? IN other words, is it possible to save templates through the web portal for other users of that web portal to have?
Note: we do not use Bex query designer

James,
If I understood your question then all the user has to do when they put together a report variant that they would like to share is when saving the variant add a technical name as well and that makes that variant visible to all users of that report on the portal. Hope this helps.
Regards,
Rudy B.

IDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops in that the viewer access from the main menu to play along with

iDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops that the viewer access from the main menu to play along with

Export the slideshow out of iMovie via the File ➙ Share ➙ File menu option as a 480p Quicktime movie.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Unable to view the reports in PDF from Workspace

Hi Experts,
I am able to view reports using Worksapce in HTML but not in PDF whereas ghostscript is installed on the FR reporting server. Bin and Lib folder of ghostscript are also in PATH of FR host. Please help how can I view the reports in PDF format.
Thanks a lot in advance.
-Naveed-

Hi Vivek,
Thanks for your reply. I am using the Hyperion Financial Reporting (11.1.1.3) server on Windows 2003 32 bit and GNU Ghostscript is only available for unix type of OS. On one of our old 9.3.x env on Windows 2003 is working fine with regular ghostscript. So seems issue is something else. Is any log files which I can review and post the error for you ?
Thanks
-Naveed-

Error trying to create a Power View report against a Multi Dimensional SSAS cube

Hi all,
We have installed the Power View For Multidimensional Models CTP, released last November 27 on our Analysis Server instances. I am now trying to create a Power View report in SharePoint that is connected to a Multi-Dimensional cube.
I have followed the instructions diligently:
1. Install the CTP
2. Created a data connection of type "Microsoft BI Semantic Model for Power View" (see attachment #1)
3. Tested that the connection was valid (all is good here!)
I then select the "Create Power View Report" option from the data connection that I created above.
The Power View GUI appears, and then throws an error:
Error text:
"An error occurred while loading the model for the item or data source 'http://server/site/SalesVarianceAnalysis_MDX.rsds'. Verify that the connection information is correct and that you have permissions to access the data source."
The details of the error are:
<detail><ErrorCode xmlns="rsCannotRetrieveModel</ErrorCode><HttpStatus">http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus
xmlns="400</HttpStatus><Message">http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="An">http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'http://hubtest/sites/broadcasting/thewowzone/Data Connections/SalesVarianceAnalysis_MDX.rsds'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><HelpLink xmlns="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName">http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="Microsoft">http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="11.0.3000.0</ProductVersion><ProductLocaleId">http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="127</ProductLocaleId><OperatingSystem">http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="OsIndependent</OperatingSystem><CountryLocaleId">http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="1033</CountryLocaleId><MoreInformation">http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="<Source>ReportingServicesLibrary</Source><Message">http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="An">http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source '<omitted for security purposes>.
Verify that the connection information is correct and that you have permissions to access the data source.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate to the report server
on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
So, I can connect with the connection, but I get an error when connecting with Power View.
Any suggestions are appreciated.
Thanks...
/Peter
Peter

Hi Peter - are you specifying the cube name in the connection string?
Data Source=[server];Initial Catalog=AdventureWorksDW-MD;Cube='Adventure Works'
Check out
http://blogs.msdn.com/b/analysisservices/archive/2012/12/09/power-view-for-multidimensional-models-feature-drill-down.aspx

Scheduling Discoverer Reports in Bulk (without GUI) - is there a way?

Hi all,
I'm looking for a way to schedule a bunch of reports without using the GUI (there's zillions of reports that run well most of the time but sometimes some of them don't work, so instead of having people going mad clicking through all of them in search of one that doesn't work we'd like to schedule them all and check which one didn't run).
I know we can schedule reports using GUI (tested) but GUI means I'll have to open and schedule each report by hand.
While doing it manually would probably keep me busy until retirement age I fear for my sanity if I start doing it that way.
Does anyone have a pointer on how to handle it? I'd love to do it through direct access to the meta tables, command line is good (although I see no documentation on scheduling via command line, only on scheduling a command to run report and running it via an external scheduler).
Thank you all in advance,
C

Hi,
is there a way? Not really. When Discoverer schedules a workbook it updates the EUL with details of the batched workbook, creates a package and view to run the workbook and schedules a job on DBMS_JOBs queue. There is no API to do this from outside Discoverer so you would have to write your own API.
Another good reason for using a 3rd party scheduler.
Rod West

Viewing reports in Access from GUI' s in Java

Similar Messages

Maybe you are looking for