Viewing the way of a message through integration process

Hey,
I would like to check the lifecycle of a message through an integration process (IP). Therefore I took the ID of a message that triggers the IP. Our IP have several sending steps and I would like to see the messages that will be send. In sxmb_moni I clicked on PE and opened the technical view of my IP.
The payloads of the container are empty. I think this is because of configuration in sxmb_adm.
Is this the only way to figure out which messages belong to my IP?
How to found the message IDs of all messages that belong tho this IP?
thx
chris
Edited by: Christian Riekenberg on Aug 20, 2008 3:38 PM

@Bhavesh Kantilal
No I didn't check this flag. Thanks for this information.
I figure out that you can show all messages to a integration process
by using transaction sxmb_moni_bpe.
Following steps are necessary:
- took the message ID, date and time of receiving of the message that triggers a integration process
- go to sxmb_moni_bpe and choose "Process to a message"
- enter receiving interface name that triggers the process and a fitting time.
- choose your process with the time and date of your message
- mark this process and look in the further information if your message ID is in this process
thx
chris
Edited by: Christian Riekenberg on Aug 20, 2008 5:12 PM

Similar Messages

How to view the payload of a Message if it processed through AAE

Hi All,
Can anybody please tell me how to view the payload if the message processed through Advance Adapter Engine.
I have developed a SOAP to SOAP interface by using Advance Adapter Engine and it is working fine I can see the messages in Runtime Work Bench(RWB) but when I clicked on the Sender and Receiver Adapter I can't see the payload so I am wondering if anyone knows how to view the payload or it is possible to view the payload if the message was processed through Advance Adapter Engine (AAE).
Is there any setting or properties available in NWA to enable or disable the payload of AAE?
Thanks,
Iqbal

Hi All,
Unfortunately I can only see the SOAP Document but no Payload.
here is what I can see
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Header xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Main xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3" versionMinor="0" soap:mustUnderstand="1">
<sap:MessageClass>ApplicationResponse</sap:MessageClass>
<sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
<sap:RefToMessageId>7597008d-9bef-11e0-a027-000027d151a6</sap:RefToMessageId>
<sap:TimeSent>2011-06-21T10:15:59Z</sap:TimeSent>
- <sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx__Sender_SOAP_AAE_BS</sap:Service>
</sap:Sender>
- <sap:Receiver>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
<sap:Service>Srv_xxxxx_Sender_SOAP_AAE_BS</sap:Service>
</sap:Receiver>
<sap:Interface namespace="urn:xxxxxxxx.com:pi:A_TEST:HTTP_TO_SOAP_AAE">SI_OS_xxxx_Request_AAE</sap:Interface>
</sap:Main>
- <sap:ReliableMessaging xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
<sap:QualityOfService>BestEffort</sap:QualityOfService>
</sap:ReliableMessaging>
<sap:System xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1" />
- <sap:HopList xmlns:sap="http://sap.com/xi/XI/Message/30" soap:mustUnderstand="1">
- <sap:Hop timeStamp="2011-06-21T10:15:59Z" wasRead="false">
<sap:Engine type="AE">af.dgx.dbdgx66</sap:Engine>
<sap:Adapter namespace="http://sap.com/xi/XI/System">XIRA</sap:Adapter>
<sap:MessageId>75e50f37-9bef-11e0-af98-000027d151a6</sap:MessageId>
</sap:Hop>
</sap:HopList>
</SOAP:Header>
- <SOAP:Body xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
- <sap:Manifest xmlns:sap="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink">
- <sap:Payload xlink:type="simple" xlink:href="cid:payload-75e51c499bef11e0a13a000027d151a6atsap.com">
<sap:Name>maindocument</sap:Name>
<sap:Description>main document</sap:Description>
<sap:Type>Application</sap:Type>
</sap:Payload>
</sap:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Do I need to do anything in NWA to enable the payload for Sender and Receiver?
Thanks,
Iqbal

Can i change the way my txt messages appear on my screeen, i hate the bubble speach mode??

Hello Is there a way i can change how my messages appear as i dont like the bubble speach message mode??. Also i like to listen to the radio through my head phones, but cant seem to do this, does anyone know of a radio app that would alow me to do this without a streaming radio app ??.

1. You can't change the way text mssage appear
2. The iPhone doesn't have a radio, so you cannot listen to the radio without a streaming app.

How can i view the conversations in my messages? the screen is blank after i send and receive., how can i view the conversations in my messages? the screen is blank after i send and receive.

i cannot view the messages that i send and receive. usually i can view the conversation but now it's empty. what settings do i need to change?

The NEF file only gives a little "nef" icon. i was able to convert the NEF to DNG on the old computer and then brought the files over to the new computer. On the old computer, the NEF files were depicted as little jpeg's so I would be able to see a picture of what each file represented. On the new computer, both the NEF files and the DNG files are depicted with icons, "nef" or "dng", but not as little pictures. On the new computer, though, I am to import the DNG's into Adobe and edit them so that is working regardless of whether or not a picture is present for the icon of each file. I've downloaded the DNG converter from Adobe and will try the conversion directly on the new computer when I get home from work. I do appreciate your responses and will let you know how it works.
I am curious then, since right now the files are represented by little "nef"'s and little "dng"'s: If I also download the viewNX (spelling might be wrong, sorry) from nikon, do you know if that maintains the file as a RAW format file but allows a picture representation of the RAW file for the icon? (That would make it easier to choose which RAW files I would choose to edit and which to not even bother with as an initial culling if that makes sense.
Cheers.

Missing sender information in message from Integration Process

Hi All,
I am testing a scenario uses Integration Process. This Integration process sends out a async message but this message has empty sender tag in header , Because of this routing rules and agreements defined for this are not triggered and message goes into error state.
There is sender interface Information in message header but not integration process information. I am working on SAP NetWeaver PI 7.1 system. This is working from other synchronous interface in same process.
Routing rule and receiver agreement has sender as mandatory field, so can not define generic set without sender component.
I went through SAP Note 807640 But there is no information about such error.
Am I missing something in configuration? Please let me know how can i configure Routing Rule and Interface Determination for this scenario.

Thanks for replying to the post.
Integration process is used as a async-sync bridge. Following are high level steps.
1. Receive async FI message from sender
2. Map message to BAPI SAP FI document
3. call Sync BAPI.
4. Map the response of BAPI.
5. Post it back to sender in async mode.
I am having problem in step 5 where message is coming out of BPE without its own name (i.e sender name). Thus it does not triggers Routing rules and fails.

Assign a constant to element of message in Integration Process

At the beginning of Integration Process I using Receive step and it receives message1, that contains only parameter "id":
<message1>
<id>1234</id>
</counter>
</message1>
Than I have some steps, than Switch step with a condition. In otherwise branch I need to assign some constant to element "counter" of message1 and send this message to the next receiver:
<message1>
<id>1234</id>
<counter>constant </counter>
</message1>
How can I do this?

In your otherwise branch, use a transformation step to all a mapping program, map the constant value to your counter element.
Regards.
Liang

I have been unable to view the content of any messages since installing OS X Mavericks. I can send and receive mail, but viewing message content crashes the mail app.

Need assistance accessing mail message content. Message display in inbox, but content cannot be viewed. I have attempted reindexing without success. Send, compose and receive all work fine. When opening content of message, the mail app crashes.

Mail: Troubleshooting sending & receiving email messages

How to view the Adressee in Sent Messages

I want to view all sent msgs(I have 3 accts) by date but also showing the "To" or "Addressee". I am using Mountain Lion and it just shows me "from" which doesn't help me when I'm looking for a specific email to a specific person. How do I set up the Sent folder to be viewed by date and showing who I sent it TO?
I'm sure this is probably an easy one but I'm nopt finding the option as I look throuogh "the usual places;)

First you have to be in Classic layout (with columns) if you're not already there. Mail Preferences - View - Use Classic Layout.
Then, right-click (or ctrl-click) on the header of the right-hand panel - in the same space where you see "From", "Subject", etc. You'll see options to add columns. Click the "To" column to add it, and any others you want. You can now sort by these columns if you wish by clicking on the column header.
Matt

Not able to view the tamil font in message

HI Team,
I couldn't read the message, which i'm getting in the Tamil language.
How can i make it hapen.?
Also Is there any option to compose the tamil message on iphone 4. ?
Please help me on this,
Thanks in advance,
Gunasekaran N
+91-9739424449

You should not have any problem reading Tamil unless the sender is using non-standard fonts/encodings, in which case it is probably hopeless. To send, get an app like IndicNotes:
http://m10lmac.blogspot.com/2010/12/indic-scripts-keyboards-available-for.html

View the songs i put on through my computer

whenever i click on my ipod device on my computer this notice pops up which im supposed to read and click agree and save. once i do nothing happens.

So you're restored your iPod shuffle?. Just sync your iPod with iTunes again to copy all your music to the iPod.

Sending Messages from Integration Processes

Dear All,
I have a problem in that my client wishes to send a message from XI via the Send Step in a BPM to a Proxy call on the target SAP system (ECC 6.0), the only problem is, is that they wish to monitor that all iDocs generated achieved a set percentage success rate < %80, if this is the case then the next message is sent from within the same BPM and so on until all 3 messages are successfully sent. If anyone of the 3 messages fail for whatever reason, the whole process must abort. Does anyone have a suggestion how this might be possible whilst retaining message persistance ?
Really stuck and thanks in advance...
Mark

I sometimes have the same problem . I tried to reconnect my wifi router and everythings turn back to work again . I don't know why it is .

Integration Processes

Hi,
Can any body please share some knowledge about how to create an Integration Process in Integration Repository. Any help would be appriciable.
Thanks,
Kulwant Singh

hi
An integration process is an executable process that you use to control complex cross-system business processes.
Integration processes are based on the exchange of XML messages. Integration processes provide SAP NetWeavers message-based process integration with functions for the stateful processing of messages. They enable you to define control structures, such as loops and parallel processing branches.
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
If u Want full doc give me u r mail id.
Thanks

Error message when attempting to view the video.

When attempting to watch a video posted to Facebook or on a forum, I get an error message when attempting to view the video. "An error occurred while processing your request. Reference #50.8dd8d3d1.1354457866.1cac8e50". I'm able to view videos via YouTube. The error seems to occur when video are embedded in a post/thread.

I was hoping someone could provide some help.

Tracing messages through a CAS server

I am configuring inbound internet message for my exchange 2013 system. and was planning on routing traffic from my DMZ edge servers to my internal CAS servers. I just realized that I will not be able to search messagetracking logs on the CAS servers should
we have delivery issues and need to trouble shoot transport.
- is there a way to trace messages through a CAS server? ( no mailbox role )
Would a preferrable configuration be to
- add the Mailbox Role to the CAS servers to enable messagetracking ( no user mailboxes )
- or to stand up a couple dedicated mailbox servers ( again, no user mailboxes ) to act as HUB servers for routing traffic
We are a large organization, think 20,000+ mailboxes, and there fore a LOT of traffic.
Tom

You can't see the normal message tracking logs on a CAS since it just proxies all the traffic but you can still enable protocol logging on the receive connector on the CAS to see more details when you need to. The logs will be in the following location
(default)
%ExchangeInstallPath%TransportRoles\Logs\FrontEnd\ProtocolLog\SmtpReceive
There is no need to add the MBX role to the CAS servers if you don't want to.
http://technet.microsoft.com/en-us/library/bb124531(v=exchg.150).aspx
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Change the ITS connection to Message Server

Hi Gurus,
Our project is using EP7 to access ECC 6 via ITS web access. EP7 -> ITS -> ECC 6
Currently, we has configured Group access via Message Server on ECC 6. We notice that, the ITS is still connected to Single Application Server on ECC 6. Do anyone know how to change the ITS connection to Message Server instead of Dedicated Application Server?
Please help.
Thanks,
HauChee

Hello,
Let's say your ITS port is 8000
The way to distribute load of integrated ITS requests to the different Dialog instances is to call port 8001 of the message server... That's it...
So basically the rule is:
Always call the message server hostname + defined ITS port number + 1
So in your EP7 system object you define your ITS as:
http://ECCITSMessageServer.domain.com:8001/...
Same rule apply in the WebAS section of that EP system object.
Then, the message server will redirect the request to one of the available dialog instances of integrated ITS on port 8000.
You will be able to see the redirection happenning by using an HTTP sniffer program like HTTPWatch ($$).
Regards,
Marc.

Viewing the way of a message through integration process

Similar Messages

Maybe you are looking for